Evanescent wave biosensors

Optical biosensors, based on evanescent wave technology, are analytical devices that measure the interactions between biomolecules in real time, without the need for any labels. Specific ligands are immobilized to a sensor surface, and a solution of receptor or antibody is injected over the top. Binding is measured by recording changes in the refractive index, caused by the molecules interacting near the sensor surface within the evanescent field. Evanescent wave-based biosensors are being used to study an increasing number of applications in the life sciences, including the binding and dissociation kinetics of antibodies and receptor-ligand pairs, protein-DNA and DNA-DNA interactions, epitope mapping, phage display libraries, and whole cell- and virus-protein interactions. There are currently four commercially available avanescent wave biosensors on the market. This article describes the technology behind their sensing techniques, as well as the range of applications in which they are employed.     

Observing secretory granules with a multiangle evanescent wave microscope

In total internal reflection fluorescence microscopy (TIRFM), fluorophores near a surface can be excited with evanescent waves, which decay exponentially with distance from the interface. Penetration depths of evanescent waves from 60 nm to 300 nm were generated by varying the angle of incidence of a laser beam. With a novel telecentric multiangle evanescent wave microscope, we monitored and investigated both single secretory granules and pools of granules in bovine chromaffin cells. By measuring the fluorescence intensity as a function of penetration depth, it is possible through a Laplace transform to obtain the fluorophore distribution as a function of axial position. We discuss the extent to which it is possible to determine distances and diameters of granules with this microscopy technique by modeling the fluorescent volumes of spheres in evanescent fields. The anisotropic near-field detection of fluorophores and the influence of the detection point-spread function are considered. The diameters of isolated granules between 70 nm and 300 nm have been reconstructed, which is clearly beyond the resolution limit of a confocal microscope. Furthermore, the paper demonstrates how evanescent waves propagate along surfaces and scatter at objects with a higher refractive index. TIRFM will have a limited applicability for quantitative measurements when the parameters used to define evanescent waves are not optimally selected.     

Time-resolved evanescent wave-induced fluorescence anisotropy for the determination of molecular conformational changes of proteins at an interface

We have shown that the molecular conformation of a protein at an interface can be probed spatially using time-resolved evanescent wave-induced fluorescence spectroscopic (TREWIFS) techniques. Specifically, by varying the penetration depth of the evanescent field, variable-angle TREWIFS, coupled with variable-angle evanescent wave-induced time-resolved fluorescence anisotropy measurements, allow us to monitor how fluorescence intensity and fluorescence depolarization vary normal to an interface as a function of time after excitation. We have applied this technique to the study of bovine serum albumin (BSA) complexed noncovalently with the fluorophore 1-anilinonaphthalene-8-sulfonic acid. The fluorescence decay varies as a function of the penetration depth of the evanescent wave in a manner that indicates a gradient of hydrophobicity through the adsorbed protein, normal to the interface. Restriction of the fluorescent probes motion also occurs as a function of distance normal to the interface. The results are consistent with a model of partial protein denaturation: at the surface, an adsorbed BSA molecule unfolds, thus optimizing protein–silica interactions and the number of points of attachment to the surface. Further away, normal to the surface, the protein molecule maintains its coiled structure.Submitted as a record of the 2002 Australian Biophysical Society meeting     

Protein biosensors based on the principle of fluorescence resonance energy transfer for monitoring cellular dynamics

Genetically-coded, fluorescence resonance energy transfer (FRET) biosensors are widely used to study molecular events from single cells to whole organisms. They are unique among biosensors because of their spontaneous fluorescence and targeting specificity to both organelles and tissues. In this review, we discuss the theoretical basis of FRET with a focus on key parameters responsible for designing FRET biosensors that have the highest sensitivity. Next, we discuss recent applications that are grouped into four common biosensor design patterns—intermolecular FRET, intramolecular FRET, FRET from substrate cleavage and FRET using multiple colour fluorescent proteins. Lastly, we discuss recent progress in creating fluorescent proteins suitable for FRET purposes. Together these advances in the development of FRET biosensors are beginning to unravel the interconnected and intricate signalling processes as they are occurring in living cells and organisms.     

Total internal reflection with fluorescence correlation spectroscopy: nonfluorescent competitors

Total internal reflection with fluorescence correlation spectroscopy is a method for measuring the surface association/dissociation rate constants and absolute densities of fluorescent molecules at the interface of a planar substrate and solution. This method can also report the apparent diffusion coefficient and absolute concentration of fluorescent molecules very close to the surface. Theoretical expressions for the fluorescence fluctuation autocorrelation function when both surface association/dissociation kinetics and diffusion through the evanescent wave, in solution, contribute to the fluorescence fluctuations have been published previously. In the work described here, the nature of the autocorrelation function when both surface association/dissociation kinetics and diffusion through the evanescent wave contribute to the fluorescence fluctuations, and when fluorescent and nonfluorescent molecules compete for surface binding sites, is described. The autocorrelation function depends in general on the kinetic association and dissociation rate constants of the fluorescent and nonfluorescent molecules, the surface site density, the concentrations of fluorescent and nonfluorescent molecules in solution, the solution diffusion coefficients of the two chemical species, the depth of the evanescent field, and the size of the observed area on the surface. Both general and approximate expressions are presented.     

免标记荧光适体传感器的研究进展

核酸适体在治疗、诊断和生物传感等领域都引起了强烈的关注和广泛的应用。与传统的识别元素-- 抗体相比较,适体展现 出很多的优点：尺寸小,化学性质稳定,容易制备和修饰。更重要的是适体在生物传感的设计上更为灵活,因此,产生了很多高选 择性、高灵敏度的新型适体传感器。目前,很多的检测手段都被应用到适体传感器中,其中荧光的检测手段占有重要的地位。虽然 荧光适体传感器已经取得了重大的进展,但是荧光标记给传感器的设计带来很多的不便,因此,免标记的荧光适体传感器备受关 注。在本文中,我们将对免标记的荧光适体传感器的研究进展进行综述,为分析工作者发展更加灵敏、更加简单、更加应用广泛的 免标记荧光适体传感器提供依据。     

Long Range Surface Plasmons for Observation of Biomolecular Binding Events at Metallic Surfaces

A long range surface plasmon (LRSP) is an electromagnetic wave propagating along a thin metal film with an order of magnitude lower damping than conventional surface plasmon (SP) waves. Thus, the excitation of LRSP is associated with a narrower resonance and it provides larger enhancement of intensity of the electromagnetic field. In surface plasmon resonance (SPR) biosensors, these features allow a more precise observation of the binding of biomolecules in the proximity to the metal surface by using the (label-free) measurement of refractive index (RI) variations and by SP-enhanced fluorescence spectroscopy. In this contribution, we investigate LRSPs excited on a layer structure consisting of a fluoropolymer buffer layer, a thin gold film, and an aqueous sample. By implementing such structure in an SPR sensor, we achieved a 2.4- and 4.4-fold improvement of the resolution in the label-free and fluorescence-based detection, respectively, of the binding of biomolecules in the close proximity to the surface. Moreover, we demonstrate that the sensor resolution can be improved by a factor of 14 and 12 for the label-free and fluorescence-based detection, respectively, if the biomolecular binding events occur within the whole evanescent field of LRSP.     

A Double-Taper Optical Fiber-Based Radiation Wave Other than Evanescent Wave in All-Fiber Immunofluorescence Biosensor for Quantitative Detection of Escherichia coli O157:H7

Cylindrical or taper-and-cylinder combination optical fiber probe based on evanescent wave has been widely used for immunofluorescence biosensor to detect various analytes. In this study, in contrast to the contradiction between penetration depth and analyte diameter of optical fiber probe-based evanescent wave, we demonstrate that double-taper optical fiber used in a radiation wave-based all-fiber immunofluorescence biosensor (RWAIB) can detect micron-scale analytes using Escherichia coli O157:H7 as representative target. Finite-difference time-domain method was used to compare the properties of evanescent wave and radiation wave (RW). Ray-tracing model was formulated to optimize the taper geometry of the probe. Based on a commercial multi-mode fiber, a double-taper probe was fabricated and connected with biosensor through a “ferrule connector” optical fiber connector. The RWAIB configuration was accomplished using commercial multi-mode fibers and fiber-based devices according to the “all-fiber” method. The standard sample tests revealed that the sensitivity of the proposed technique for E. coli O157:H7 detection was 10³ cfu·mL⁻¹. Quantitation could be achieved within the concentration range of 10³ cfu·mL⁻¹ to 10⁷ cfu·mL⁻¹. No non-specific recognition to ten kinds of food-borne pathogens was observed. The results demonstrated that based on the double-taper optical fiber RWAIB can be used for the quantitative detection of micron-scale targets, and RW sensing is an alternative for traditional evanescent wave sensing during the fabrication of fiber-optic biosensors.     

Total internal reflection with fluorescence correlation spectroscopy: combined surface reaction and solution diffusion

Total internal reflection with fluorescence correlation spectroscopy (TIR-FCS) is a method for measuring the surface association/dissociation rates and absolute densities of fluorescent molecules at the interface of solution and a planar substrate. This method can also report the apparent diffusion coefficient and absolute concentration of fluorescent molecules very close to the surface. An expression for the fluorescence fluctuation autocorrelation function in the absence of contributions from diffusion through the evanescent wave, in solution, has been published previously (N. L. Thompson, T. P. Burghardt, and D. Axelrod. 1981, Biophys. J. 33:435-454). This work describes the nature of the TIR-FCS autocorrelation function when both surface association/dissociation kinetics and diffusion through the evanescent wave contribute to the fluorescence fluctuations. The fluorescence fluctuation autocorrelation function depends in general on the kinetic association and dissociation rate constants, the surface site density, the concentration of fluorescent molecules in solution, the solution diffusion coefficient, and the depth of the evanescent field. Both general and approximate expressions are presented.     

Immunosensors: sources of origin, achievements and perspectives

The analysis of the recent data in the literature and results of investigations in the field of the development and study of function efficiency of different types of immune sensors, that are performed at the Department of Biochemistry Sensory and Regulatory Systems of the A. V. Palladin Institute of Biochemistry of Ukrainian National Academy of Sciences are presented. Sources of origination and perspectives of the devlopment of biosensors are discussed as well. The paper also gives an overview of main research projects at the Department, mainly in the filed of biosensors. They include development of the scientific bases for the creation of a new generation of chemo- and biosensors for their application in medicine and ecology. Multi-immune, multi-enzyme and combined multi-parametrical sensors can provide express analyses in laboratory and field conditions with the purpose to perform immune chemical diagnostics of diabet, kidney diseases, immune defficiencies, autoimmune, allergic, pre-infarction and pre-tumor states as well as to control total toxicity of the environment and identification of main types of toxic elements in it. The investigations are based on the latest achivements in the field of physics, chemistry, information technology and electronics with the use of different types of planar electrodes, ion sensitive field effect transistors (ISFETs), semiconductor capacitive structures, termistors, optrodes, piezocrystalls and application of such methods and effects as laser correlation spectroscopy, chemiluminescence, fluorescence, surface plasmon resonance, photoluminescence of porous silicon, interferometry, evanescent wave technique, nonemmiting energy transfer and holography.     

Pushing the detection limits: the evanescent field in surface plasmon resonance and analyte-induced folding observation of long human telomeric repeats

Conventional analysis of molecular interactions by surface plasmon resonance is achieved by the observation of optical density changes due to analyte binding to the ligand on the surface. Low molecular weight interaction partners are normally not detected. However, if a macromolecule such as DNA can extend beyond the evanescent field and analyte interaction results in a large-scale contraction, then the refractive index changes due to the increasing amount of macromolecules close to the surface. In our proof-of-principle experiment we could observe the direct folding of long, human telomeric repeats induced by the small analyte potassium using surface plasmon resonance spectroscopy. This work demonstrates the feasibility of new evanescent field-based biosensors that can specifically observe small molecule interactions.     

SPR生物传感器及其应用进展

基于表面等离子体共振 (SPR)技术的光学生物传感器是进行生物分子相互作用分析的一种先进手段。与传统的超速离心、荧光法等相比 ,它具有实时检测、无需标记、耗样最少等特点 ,在药物筛选、临床诊断、食物及环境监控和膜生物学等领域中的新兴应用日益扩大 ,并且已成为生命科学和制药研究的一种标准的生物物理学工具。综述了近几年国际上生物传感器的应用进展情况 ,并简要展望了该技术的发展和应用前景     

Imaging of dynamic secretory vesicles in living pollen tubes of Picea meyeri using evanescent wave microscopy

Evanescent wave excitation was used to visualize individual, FM4-64-labeled secretory vesicles in an optical slice proximal to the plasma membrane of Picea meyeri pollen tubes. A standard upright microscope was modified to accommodate the optics used to direct a laser beam at a variable angle. Under evanescent wave microscopy or total internal reflection fluorescence microscopy, fluorophores localized near the surface were excited with evanescent waves, which decay exponentially with distance from the interface. Evanescent waves with penetration depths of 60 to 400 nm were generated by varying the angle of incidence of the laser beam. Kinetic analysis of vesicle trafficking was made through an approximately 300-nm optical section beneath the plasma membrane using time-lapse evanescent wave imaging of individual fluorescently labeled vesicles. Two-dimensional trajectories of individual vesicles were obtained from the resulting time-resolved image stacks and were used to characterize the vesicles in terms of their average fluorescence and mobility, expressed here as the two-dimensional diffusion coefficient D2. The velocity and direction of vesicle motions, frame-to-frame displacement, and vesicle trajectories were also calculated. Analysis of individual vesicles revealed for the first time, to our knowledge, that two types of motion are present, and that vesicles in living pollen tubes exhibit complicated behaviors and oscillations that differ from the simple Brownian motion reported in previous investigations. Furthermore, disruption of the actin cytoskeleton had a much more pronounced effect on vesicle mobility than did disruption of the microtubules, suggesting that actin cytoskeleton plays a primary role in vesicle mobility.     

Fluorescence imaging with two-photon evanescent wave excitation

We demonstrate broad-field, non-scanning, two-photon excitation fluorescence (2PEF) close to a glass/cell interface by total internal reflection of a femtosecond-pulsed infrared laser beam. We exploit the quadratic intensity dependence of 2PEF to provide non-linear evanescent wave (EW) excitation in a well-defined sample volume and to eliminate scattered background excitation. A simple model is shown to describe the resulting 2PEF intensity and to predict the effective excitation volume in terms of easily measurable beam, objective and interface properties. We demonstrate non-linear evanescent wave excitation at 860 nm of acridine orange-labelled secretory granules in live chromaffin cells, and excitation at 900 nm of TRITC-phalloidin-actin/GPI-GFP double-labelled fibroblasts. The confined excitation volume and the possibility of simultaneous multi-colour excitation of several fluorophores make EW 2PEF particularly advantageous for quantitative microscopy, imaging biochemistry inside live cells, or biosensing and screening applications in miniature high-density multi-well plates.Abbreviations 1PEF one-photon excited fluorescence - 2PEF two-photon excited fluorescence - APD avalanche photo diode - CHO Chinese hamster ovary - DMEM Dulbecco's modified Eagle's medium - EGFP enhanced green fluorescent protein - EW evanescent wave - FCS fetal calf serum - GPI glycosylphosphatidylinositol - TIR total internal reflectionThis paper is dedicated to the memory of Prof. Horst Harreis (1940–2002)     

Effect of taper geometries and launch angle on evanescent wave penetration depth in optical fibers

A large penetration depth of an evanescent wave is the key to success for developing an ultra high-resolution fiber-based evanescent wave biosensor. Tapering the fiber and launching light at an angle has the potential of increasing the penetration depth of evanescent wave manifolds. The effects of tapering, launch angle and taper length of the fiber have been explored in detail using a ray-tracing model to calculate the highest possible penetration depth of the evanescent field. Evanescent wave penetration depths of the order of the size of living cells have been achieved by optimizing the parameters relating geometry of tapered fibers.     

Quantitative measurement of binding kinetics in sandwich assay using a fluorescence detection fiber-optic biosensor

Fiber-optic biosensors have been studied intensively because they are very useful and important tools for monitoring biomolecular interactions. Here we describe a fluorescence detection fiber-optic biosensor (FD-FOB) using a sandwich assay to detect antibody-antigen interaction. In addition, the quantitative measurement of binding kinetics, including the association and dissociation rate constants for immunoglobulin G (IgG)/anti-mouse IgG, is achieved, indicating 0.38 × 10⁶ M⁻¹ s⁻¹ for k_a and 3.15 × 10⁻³ s⁻¹ for k_d. These constants are calculated from the fluorescence signals detected on fiber surface only where the excited evanescent wave can be generated. Thus, a confined fluorescence-detecting region is achieved to specifically determine the binding kinetics at the vicinity of the interface between sensing materials and uncladded fiber surface. With this FD-FOB, the mathematical deduction and experimental verification of the binding kinetics in a sandwich immunoassay provide a theoretical basis for measuring rate constants and equilibrium dissociation constants. A further measurement to study the interaction between human heart-type fatty acid-binding protein and its antibody gave the calculated kinetic constants k_a, k_d, and K_D as 8.48 × 10⁵ M⁻¹ s⁻¹, 1.7 × 10⁻³ s⁻¹, and 2.0 nM, respectively. Our study is the first attempt to establish a theoretical basis for the florescence-sensitive immunoassay using a sandwich format. Moreover, we demonstrate that the FD-FOB as a high-throughput biosensor can provide an alternative to the chip-based biosensors to study real-time biomolecular interaction.     

Evanescent interference patterns for fluorescence microscopy.

The increasing experimental use of total internal reflection/fluorescence photobleaching recovery has motivated a theoretical study of the spatial intensity profiles generated by two interfering evanescent waves. The interference patterns generated by evanescent waves differ considerably from those generated by plane waves in a homogenous medium because evanescent waves are not transverse and because the evanescent propagation number depends on the incidence angle of the totally internally reflected light. The periodicity and contrast of the evanescent interference patterns under various conditions are calculated; these parameters depend on the intensities, polarizations, and incidence angles of the two incident beams, as well as the refractive indices of the two media that form the planar interface where total internal reflection occurs. The derived intensity profiles are used to develop expressions for the shapes of fluorescence photobleaching recovery curves when evanescent interference patterns are used for fluorescence excitation and bleaching. The calculations also suggest that colliding beam experiments may confirm theoretically predicted evanescent field polarizations.     

A novel nanolayer biosensor principle

A method for eliminating the mass transport limitation on biosensor surfaces is introduced. The measurement of macromolecular binding kinetics on plane surfaces is the key objective of many evanescent wave (e.g. total internal reflection fluorescence (TIRF)), and surface plasmon resonance (SPR) based biosensor systems, allowing the determination of binding constants within minutes or hours. However, these methods are limited in not being rigorously applicable to large macromolecules like proteins or DNA, since the on-rates are transport limited due to a Nernst diffusion layer of 5-10 microm thickness. Thus, for the binding of fibrinogen (340 kDa) to a surface current SPR biosensors will show a mass transport coefficient of ca. 2 x 10(-6) m/s. In a novel approach with an immiscible fluid vesicle (e.g. air bubble), it has been possible to generate nanoscopic fluid films of ca. 200 nm thickness on the sensor surface of an interfacial TIRF rheometer system. The thickness of the liquid film can be can be easily probed and measured by evanescent wave technology. This nanofilm technique increases the mass transport coefficient for fibrinogen to ca. 1 x 10(-4) m/s eliminating the mass transport limitation, making the binding rates reaction-rate limited. From the resulting exponential kinetic functions, lasting only 20-30s, the kinetic constants for the binding reaction can easily be extracted and the binding constants calculated. As a possible mechanism for the air bubble effect it is suggested that the aqueous fluid flow in the rheometer cell is separated by the air bubble below the level of the Nernst boundary layer into two independent laminar fluid flows of differing velocity: (i) a slow to stationary nanostream ca. 200 nm thick strongly adhering to the surface; and (ii) the bulk fluid streaming over it at a much higher rate in the wake of the air bubble. Surprising properties of the nanofluidic film are: (i) its long persistence for at least 30-60s after the air bubble has passed (2.5s); and (ii) the absence of solute depletion. It is suggested that a new liquid-liquid interface (i.e. a "vortex sheet") between the two fluid flows plays a decisive role, lending metastability to the nanofluidic film and replenishing its protein concentration via the vortices-thus upholding exponential binding kinetics. Finally, the system relaxes via turbulent reattachment of the two fluid flows to the original velocity profile. It is concluded that this technique opens a fundamentally novel approach to the construction of macromolecular biosensors.     

Electrochemical-based biosensors for detection of Mycobacterium tuberculosis and tuberculosis biomarkers

Abstract

Early detection of tuberculosis (TB) reduces the interval between infection and the beginning of treatment. However, commercially available tests cannot discriminate between BCG-vaccinated healthy persons and patients. Also, they are not suitable to be used for immunocompromised persons. In recent years, biosensors have attracted great attention due to their simple utility, accessibility, and real-time outputs. These sensors are increasingly being considered as pioneering tools for point-of-care diagnostics in communities with a high burden of TB and limited accessibility to reference laboratories. Among other types of biosensors, the electrochemical sensors have the advantages of low-cost operation, fast processing, simultaneous multi-analyte analyzing, operating with turbid samples, comparable sensitivity and readily available miniaturization. Electrochemical biosensors are sub-divided into several categories including: amperometric, impedimetric, potentiometric, and conductometric biosensors. The biorecognition element in electrochemical biosensors is usually based on antibodies (immunosensors), DNAs or PNAs (genosensors), and aptamers (aptasensors). In either case, whether an interaction of the antigen–antibody/aptamer or the hybridization of probe with target mycobacterial DNA is detected, a change in the electrical current occurs that is recorded and displayed as a plot. Therefore, impedimetric-based methods evaluate resistance to electron transfer toward an electrode by a Nyquist plot and amperometric/voltammetric-based methods weigh the electrical current by means of cyclic voltammetry, square wave voltammetry, and differential pulse voltammetry. Electrochemical biosensors provide a promising scope for the new era of diagnostics. As a consequence, they can improve detection of Mycobacterium tuberculosis traces even in attomolar scales.     

Prospects for applications of lanthanide-based upconverting surfaces to bioassay and detection

Biological assays to detect binding interactions are often conducted using fluorescence resonance energy transfer (FRET) but this has several disadvantages that markedly reduce the dynamic range of measurements. The very short range of FRET interactions also causes difficulties when large analytes such as viruses or spores are to be detected. Conventional FRET-based assays can in principle be improved using infrared-excited upconverting lanthanide-based energy donors but this does not address the short range of the FRET process. Here we investigate an alternative mode of energy transfer based on evanescent wave coupling from an erbium-doped waveguide to an absorbed fluorophore and characterise the luminescence from the dopant. The upconverted erbium emission is highly structured with well-separated bands in the violet, green and red spectral regions and very little detectable signal between the peaks. The relative intensity of these bands depends on power-density of infrared excitation. Green emission predominates at low power-density and red emission increases more rapidly as power-density increases, with a smaller violet peak also emerging. The temporal response of the upconverting material to pulsed infrared excitation was investigated and was shown to vary markedly with emission wavelength with the red component being particularly sensitive to the duration of the excitation pulse. A surface monolayer of the fluorescent protein R-phycoerythrin was very easily detected on binding to an upconverting waveguide. The potential advantages and limitations of the evanescent wave excitation technique for fluorescence detection are discussed and avenues for further development are considered.