A disposable two-throughput electrochemical immunosensor chip for simultaneous multianalyte determination of tumor markers

A disposable two-throughput immunosensor array was proposed for simultaneous electrochemical determination of tumor markers. The low-cost immunosensor array was fabricated simply using cellulose acetate membrane to co-immobilize thionine as a mediator and two kinds of antigens on two carbon electrodes of a screen-printed chip, respectively. With two simultaneous competitive immunoreactions the corresponding horseradish peroxidase (HRP) labeled antibodies were captured on the membranes, respectively, on which the immobilized thionine shuttled electrons between HRP and the electrodes for enzymatic reduction of H2O2 to produce detectable signals. The electrochemical and electronic cross-talks between the electrodes could be avoided, which was beneficial to the miniaturization of the array without considering the distance between immunosensors. Under optimal conditions the immunosensor array could be used for fast simultaneous electrochemical detection of CA 19-9 and CA 125 with the limits of detection of 0.2 and 0.4 U/ml, respectively. The serum samples from clinic were assayed with the proposed method and the results were in acceptable agreement with the reference values. The proposed method for preparation of immunosensor array could be conveniently used for fabrication of disposable electrochemical biochip with high throughput and possessed the potential of mass production and commercialization.     

The biocatalytic effect of Halobacterium halobium on photoelectrochemical hydrogen production

Hydrogen gas can be produced electrochemically by leading a current through two electrodes immersed in a NaCl solution. Bacteriorhodopsin (BR) a protein found in the purple membrane of Halobacterium halobium, is known to pump protons across the membrane upon illumination. In this study, the effect of BR on photoelectrochemical hydrogen production was investigated. A batch type bio-photoelectrochemical reactor was designed and constructed. The photoelectrochemical hydrogen production experiments were performed with free H. halobium packed cells or immobilised H. halobium cells. The cells were either immobilised in polyacrylamide gel (PAG) or on cellulose acetate membrane (CAM). Experiments were also performed with purple membrane fragments of H. halobium immobilised on cellulose acetate membrane. It was found that the presence of bacteriorhodopsin (BR) in the reactor enhances the hydrogen production rate upon illumination. Immobilisation increased the amount of hydrogen produced per mole of BR. Compared to control experiments without BR, the power requirement of the photoelectrochemical reactor per amount of hydrogen produced decreased fourfold when purple membrane fragments immobilised on CAM were used. The presence of BR regulates the pH of the system, increases the hydrogen production rate and causes light-induced proton dissociation, which lowers the electrical power requirement for the electrochemical conversion.     

Exceptionally Enhanced Electrode Activity of (Pr,Ce)O2−δ‐Based Cathodes for Thin‐Film Solid Oxide Fuel Cells

It is shown that an electrochemically‐driven oxide overcoating substantially improves the performance of metal electrodes in high‐temperature electrochemical applications. As a case study, Pt thin films are overcoated with (Pr,Ce)O_2?δ (PCO) by means of a cathodic electrochemical deposition process that produces nanostructured oxide layers with a high specific surface area and uniform metal coverage and then the coated films are examined as an O₂‐electrode for thin‐film‐based solid oxide fuel cells. The combination of excellent conductivity, reactivity, and durability of PCO dramatically improves the oxygen reduction reaction rate while maintaining the nanoscale architecture of PCO layers and thus the performance of the PCO‐coated Pt thin‐film electrodes at high temperatures. As a result, with an oxide coating step lasting only 5 min, the electrode resistance is successfully reduced by more than 1000 times at 500 °C in air. These observations provide a new direction for the design of high‐performance electrodes for high‐temperature electrochemical cells.     

醋酸纤维素膜为基础的葡萄糖生物传感器的研制

用共价法将酶固定在醋酸纤维素膜上,方法简便易行,制造的酶膜稳定,比活力高。同时采用该方法制备了葡萄糖氧化酶酶膜,与氧电极组装成测定葡萄糖的生物传感器,线性范围为50~800mg／dl,仪器工作的最适pH为6．0,最适温度为40℃。将该膜与过氧化氢电极组装得到的传感器具有以下特性：线性范围为10~200mg／dl,最适pH为6．0,测定结果与酶试制盒有良好相关性。     

Development of a molecular diagnosis assay based on electrohybridization at plastic electrodes and subsequent PCR

Technologies enabling specific recognition of medically relevant nucleic acid sequences will play a pivotal role in future medical diagnosis. Whereas many approaches to molecular diagnosis systems include DNA microarrays on chips and fluorometric detection, the basis of our approach is the use of inexpensive components like plastic or metal thin film electrodes with low multiplexing and an electrochemical detection unit. To increase the sensitivity, PCR can be used as an intermediate step. For selective enrichment, specific nucleic acid probes were covalently attached at their 5′-ends to conducting polycarbonate/carbon fiber electrodes. Complementary oligonucleotides were enriched at the electrodes by cyclic inversion of an electrochemical potential, transferred into a PCR vial and thermally or electrochemically desorbed. The analysis of the PCR product shows the efficiency and selectivity of the electrochemical enrichment. Hybridization of DNA was shown by electrochemical methods, in this work especially by differential pulse voltammetry (DPV) using the single strand specific hybridization redox indicator osmium(VIII)-tetroxide, and potentiometric stripping analysis (PSA). This combination of experimental methods is the basis for a molecular diagnosis system including a disposable nucleic acid modified working electrode for specific enrichment, detection and quantification, and an optional capillary PCR module for fast amplification.     

Contrasting of Lowicryl K4M thin sections

Summary A method is presented for increasing the contrast of cellular structures on ultrathin sections from tissues embedded in Lowicryl K4M. The method, designated UA/MC adsorption staining, is based on the uranyl acetate/methyl cellulose staining of thawed cryosections. Ultrathin Lowicryl K4M sections were exposed to a uranyl acetate/methyl cellulose solution and the excess solution was removed with filter paper, leaving the remainder to air dry on the section. Sections on the grids were then directly observed in the electron microscope. Parameters such as methyl cellulose and uranyl acetate concentrations, duration of staining, temperature and pH were all assessed for their effect on subsequent contrast formation. Conditions were achieved which yielded intense contrast of cellular membranes, basement membranes and extracellular matrix components usually not apparent in Lowicryl K4M thin sections routinely counter-stained with uranyl acetate and lead acetate. The enhancement of the contrast of these structures does not obscure colloidal gold particles used for immunocytochemistry or lectin labeling, thus making the UA/MC adsorption staining method useful for increasing membrane contrast in routine post-embedding immuno- and lectin cytochemistry on Lowicryl K4M thin sections.     

Contrasting of Lowicryl K4M thin sections.

A method is presented for increasing the contrast of cellular structures on ultrathin sections from tissues embedded in Lowicryl K4M. The method, designated UA/MC adsorption staining, is based on the uranyl acetate/methyl cellulose staining of thawed cryosections. Ultrathin Lowicryl K4M sections were exposed to a uranyl acetate/methyl cellulose solution and the excess solution was removed with filter paper, leaving the remainder to air dry on the section. Sections on the grids were then directly observed in the electron microscope. Parameters such as methyl cellulose and uranyl acetate concentrations, duration of staining, temperature and pH were all assessed for their effect on subsequent contrast formation. Conditions were achieved which yielded intense contrast of cellular membranes, basement membranes and extracellular matrix components usually not apparent in Lowicryl K4M thin sections routinely counter-stained with uranyl acetate and lead acetate. The enhancement of the contrast of these structures does not obscure colloidal gold particles used for immunocytochemistry or lectin labeling, thus making the UA/MC adsorption staining method useful for increasing membrane contrast in routine post-embedding immuno- and lectin cytochemistry on Lowicryl K4M thin sections.     

Cellulose acetate impregnated with polyacrylamide: a novel medium for electrophoresis

Cross-linked polyacrylamide gel containing a low proportion of methylenebis-acrylamide has been incorporated into cellulose acetate membranes. Unlike on cellulose acetate itself, electrophoresis on these modified membranes enables molecular sieving of proteins under a wide range of conditions. By modifying only part of the membrane, samples can be loaded in the normal way and sharpen as they migrate across the cellulose acetate-polyacrylamide boundary. The thin membranes retain their general ease of handling and speed of staining and destaining.     

长白山树舌水溶性色素多糖CF_1的分离纯化与结构研究

 从长白山树舌子实体中分离色素多糖,其均一性检查用Sepharose CL-4B柱层析、高压玻璃纤维纸电泳、醋酸纤维素薄膜电泳、超离心分析等方法,用凝胶层析测定的分子量为18.5万。 均一的脱色多糖(CF_1a)分子量为14万。用红外光谱,G.C,~1H-N.M.R,~(13)CN.M.R,高碘酸氧化与Smith降解,甲基化分析等确定其结构为葡聚糖,其基本结构可能如下式: 总色素用次氯酸氧化法测定为24％。在色素多糖中的色素可能是聚合形式。色 素经薄层层析、紫外吸收性质检查等表明可能是新黄酮类化合物。     

Electrochemical characterization of Geobacter sulfurreducens cells immobilized on graphite paper electrodes

Bacteria able to transfer electrons to conductive surfaces are of interest as catalysts in microbial fuel cells, as well as in bioprocessing, bioremediation, and corrosion. New procedures for immobilization of Geobacter sulfurreducens on graphite electrodes are described that allow routine, repeatable electrochemical analysis of cell-electrode interactions. Immediately after immobilizing G. sulfurreducens on electrodes, electrical current was obtained without addition of exogenous electron shuttles or electroactive polymers. Voltammetry and impedance analysis of pectin-immobilized bacteria transferring electrons to electrode surfaces could also be performed. Cyclic voltammetry of immobilized cells revealed voltage-dependent catalytic current similar to what is commonly observed with adsorbed enzymes, with catalytic waves centered at -0.15 V (vs. SHE). Electrodes maintained at +0.25 V (vs. SHE) initially produced 0.52 A/m(2) in the presence of acetate as the electron donor. Electrical Impedance Spectroscopy of coatings was also consistent with a catalytic mechanism, controlled by charge transfer rate. When electrodes were maintained at an oxidizing potential for 24 h, electron transfer to electrodes increased to 1.75 A/m(2). These observations of electron transfer by pectin-entrapped G. sulfurreducens appear to reflect native mechanisms used for respiration. The ability of washed G. sulfurreducens cells to immediately produce electrical current was consistent with the external surface of this bacterium possessing a pathway linking oxidative metabolism to extracellular electron transfer. This electrochemical activity of pectin-immobilized bacteria illustrates a strategy for preparation of catalytic electrodes and study of Geobacter under defined conditions.     

Modification of carbon nanotubes with redox hydrogel: improvement of amperometric sensing sensitivity for redox enzymes

This study demonstrated that redox hydrogel-modified carbon nanotube (CNT) electrodes can be developed as an amperometric sensor that are sensitive, specific and fast and do not require auxiliary enzymes. A redox polymer, poly(vinylimidazole) complexed with Os(4,4'-dimethylbpy)(2)Cl (PVI-dmeOs) was electrodeposited on Ta-supported multi-walled CNTs. The resulted PVI-dmeOs thin film did not change the surface morphology of the CNTs, but turned the CNT surface from hydrophobic to hydrophilic, as studied by scanning electron microscopy (SEM) and static water contact angle measurements. Cyclic voltammetry measurements in a Fe(CN)(6)(3-) solution and electrochemical impedance measurements in an equimolar Fe(CN)(6)(3-/4-) solution demonstrated that the PVI-dmeOs hydrogel thin film was electronic conductive with a resistance of about 15Omega. The PVI-dmeOs/CNT electrodes sensed rapidly, sensitively and specifically to model redox enzymes (glucose oxidase (GOD) and lactate oxidase (LOD)) in amperometric experiments in electrolyte solutions containing the substrates of the measured redox enzymes. Both the CNT substrate and the thin PVI-dmeOs film enhanced the sensing sensitivities. Exploration of the mechanisms suggests that the PVI-dmeOs film may enhance the sensing sensitivities by wiring the enzyme molecules through the redox centers tethered on the mobile redox polymer backbones to the CNT electrodes.     

Selective protein transport through a thin cellulose coated porous membrane

A new composite membrane was designed and studied for permselectivity of various molecular weight proteins. The membrane is composed of a porous substrate membrane [Durapore; poly(vinylidene fluoride)] coated with a thin dense layer of regenerated cellulose. This composite membrane was fabricated by spin coating a cellulose acetate solution onto the membrane, followed by alkaline hydrolysis of the cellulose acetate coating to regenerate cellulose. The coated layer was physically characterized by scanning electron microscopy (SEM) and infrared (IR) spectroscopy. In addition, the water uptake into and permeation properties of macromolecules across the coated and uncoated membranes were studied. A typical composite membrane coating was 0.8 +/- 0.2 mum thick, resulting in a molecular weight cutoff of approximately 40,000 daltons. This composite membrane also demonstrated negligible diffusional lag time for permeants, due to the diffusional barrier. (c) 1994 John Wiley & Sons, Inc.     

A graphene screen-printed carbon electrode for real-time measurements of unoccupied active sites in a cellulase

Cellulases hydrolyze cellulose to soluble sugars and this process is utilized in sustainable industries based on lignocellulosic feedstock. Better analytical tools will be necessary to understand basic cellulase mechanisms, and hence deliver rational improvements of the industrial process. In this work we describe a new electrochemical approach to the quantification of the populations of enzyme that are respectively free in the aqueous bulk, adsorbed to the insoluble substrate with an unoccupied active site or threaded with the cellulose strand in the active tunnel. Distinction of these three states appears essential to the identification of the rate-limiting step. The method is based on disposable graphene-modified screen-printed carbon electrodes, and we show how the temporal development in the concentrations of the three enzyme forms can be derived from a combination of the electrochemical data and adsorption measurements. The approach was tested for the cellobiohydrolase Cel7A from Hypocrea jecorina acting on microcrystalline cellulose, and it was found that the threaded enzyme form dominates for this system while adsorbed enzyme with an unoccupied active site constitutes less than 5% of the population.     

Palladium-bacterial cellulose membranes for fuel cells

Bacterial cellulose is a versatile renewable biomaterial that can be used as a hydrophilic matrix for the incorporation of metals into thin, flexible, thermally stable membranes. In contrast to plant cellulose, we found it catalyzed the deposition of metals within its structure to generate a finely divided homogeneous catalyst layer. Experimental data suggested that bacterial cellulose possessed reducing groups capable of initiating the precipitation of palladium, gold, and silver from aqueous solution. Since the bacterial cellulose contained water equivalent to at least 200 times the dry weight of the cellulose, it was dried to a thin membranous structure suitable for the construction of membrane electrode assemblies (MEAs). Results of our study with palladium-cellulose showed that it was capable of catalyzing the generation of hydrogen when incubated with sodium dithionite and generated an electrical current from hydrogen in an MEA containing native cellulose as the polyelectrolyte membrane (PEM). Advantages of using native and metallized bacterial cellulose membranes in an MEA over other PEMs such as Nafion 117 include its higher thermal stability to 130 degrees C and lower gas crossover.     

SU-8-carbon composite as conductive photoresist for biochip applications

A composite photoresist has been developed for the direct photopatterning of electrodes useful as biochip substrates. The material is composed of SU-8 polymer added with graphite carbon filler which enables patterning of conductive thin films (22μm) on both glass substrate and transparency flexible film with a standard UV photolithography protocol. The resolution obtained using the conductive composite compared well with the bare resist, with lateral resolutions of 5 and 10μm for bare and conductive resists, respectively. The obtained electrodes, after an electrochemical pre-treatment, exhibited very good electrochemical behaviors, opening the path to various electrochemical detections and grafting possibilities. In order to demonstrate the potentialities of the developed material in the biosensors and biochips field, DNA probes were electrografted, using diazonium chemistry, directly at the composite photoresist surface. Target oligonucleotide interactions were detected using chemiluminescent labeling and a satisfactory detection limit of 0.25nM target sequence was demonstrated with a detection ranging over three orders of magnitude.     

Voltammetric detection of single base-pair mismatches and quantification of label-free target ssDNA using a competitive binding assay

The application of electrochemical techniques for DNA detection is motivated by their potential to detect hybridisation events in a more rapid, simplistic and cost-effective manner compared to conventional optical assays. Here, we present an electrochemical DNA sensor for the specific and quantitative detection of single-stranded DNA (ssDNA). Probe oligonucleotides were immobilised onto thin gold film electrodes by a 5'-thiol-linker. Hybridisation was detected by means of the electroactive redox-marker methylene blue (MB) covalently attached to the 5'-end of the target ssDNA and voltammetric techniques. MB-labeled target ssDNA was recognised down to 30 pmol. By application of a competitive binding assay, non-labeled ssDNA was detected down to 3 pmol. In addition, the DNA-modified electrodes were capable of sensing single base-pair mismatches at different positions within the sequence of the hybridised double-stranded DNA (dsDNA).     

Application of white cellulose acetate sheets on fossil wood investigation

Generally, transparent cellulose acetate sheets as a peel technique material are used in the identification of fossils, whereas white cellulose acetate sheets as a biochemistry technique material are applied in serum protein electrophoresis (SPE). Here we report the application of white cellulose acetate sheets for identifying a polished fossil wood from the Upper Mesozoic of West Liaoning, China. Based on the characters of transverse, radial, and tangential sections, the fossil wood is ascribed to a taxon of Protoglyptostroboxylon sp. Compared with transparent cellulose acetate sheets, white cellulose acetate sheets not only provide the similar information as that of the former, but also are more easily acquired in the Chinese market than the former. Because peel technique supported by white cellulose acetate sheets has the advantages of simple, time-saving, safe, reliable, and practical operation with lower material loss, it is a very good choice for the polished fossil wood investigation in labs, museums, geological parks, and handicraft shops. It is also a convenient approach to training students to learn the anatomic structure of fossil wood.     

Extracellular polysaccharides associated with thin aggregative fimbriae of Salmonella enterica serovar enteritidis

Lipopolysaccharide (LPS) O polysaccharide was identified as the principle factor impeding intercellular formation of intact thin aggregative fimbriae (Tafi) in Salmonella enterica serovar Enteritidis. The extracellular nucleation-precipitation assembly pathway for these organelles was investigated by quantifying fimbrial formation between deltaagfA (AgfA recipient) and deltaagfB (AgfA donor) cells harboring mutations in LPS (galE::Tn10) and/or cellulose (deltabcsA) synthesis. Intercellular complementation could be detected between deltaagfA and deltaagfB strains only when both possessed the galE mutation. LPS O polysaccharide appears to be an impenetrable barrier to AgfA assembly between cells but not within individual cells. The presence of cellulose did not restrict Tafi formation between cells. Transmission electron microscopy of w+ S. enterica serovar Enteritidis 3b cells revealed diffuse Tafi networks without discernible fine structure. In the absence of cellulose, however, individual Tafi fibers were clearly visible, appeared to be occasionally branched, and showed the generally distinctive appearance described for Escherichia coli K-12 curli. A third extracellular matrix component closely associated with cellulose and Tafi was detected on Western blots by using immune serum raised to whole, purified Tafi aggregates. Cellulose was required to tightly link this material to cells. Antigenically similar material was also detected in S. enterica serovar Typhimurium and one diarrheagenic E. coli isolate. Preliminary analysis indicated that this material represented an anionic, extracellular polysaccharide that was distinct from colanic acid. Therefore, Tafi in their native state appear to exist as a complex with cellulose and at least one other component.     

A three-dimensional gold nanodendrite network porous structure and its application for an electrochemical sensing

A three dimensional (3D) gold (Au) nanodendrite network porous structure constructed by a simple electrochemical synthetic method has been presented, and its utility for sensitive electrochemical measurement was demonstrated in this study. The 3D nanodendrite network porous structure was constructed on a platinum surface through electrodeposition of Au under the presence of hydrogen bubbles generated from the same surface. Iodide, used as a co-reagent, played an important role in the construction of the nanodendrite network by preventing continual growth of Au into larger agglomerates as well as inhibiting coalescence of neighboring nanodendrites. An electrochemical sensor incorporating the structure was built and used to detect As(III) in ultra low concentration range. For the purpose of comparison, bare gold and gold nanoparticle-incorporated electrodes were also prepared. With the use of 3D nanodendrite network porous structure, a much more sensitive detection of As(III) was possible due to its large surface area.     

Efficient approach to design stable water-dispersible nanoparticles of hydrophobic cellulose esters

Commercially prepared cellulose acetate, cellulose acetate propionate, -butyrate, and -phthalate as well as cellulose acetates prepared in the laboratory scale with varying degree of substitution (DS) self-assemble into regular nanoparticles, ranging in size from 86 to 368 nm, by using two different techniques of nanoprecipitation. Dialysis of polymers dissolved in N,N-dimethylacetamide results in the formation of regular nanospheres whereas the preparation in acetone by successive adding of water leads to bean-shaped particles in the nanoscale. One criterion for nanoprecipitation is the existence of dilute polymer solutions. Furthermore, the formation of nanoparticles strongly depends on DS and distribution of the substituents. Concerning this issue, quantitative (13)C NMR spectroscopy was applied for detailed structure characterization of selected cellulose acetates. The stability of the nanoparticle suspensions in the physiological pH range was observed by zeta potential measurements.