Femtomole sensitive radioimmunoassay for cyclic AMP and cyclic GMP after 2'0 acetylation by acetic anhydride in aqueous solution.

The sensitivity of radioimmunoassays for cyclic AMP and cyclic GMP has been markedly improved to readily detect femtomole (10-15) amounts in tissue extracts by acetylating the cyclic nucleotides at the 2'0 position with acetic anhydride. Acetylation of cyclic nucleotides by acetic anhydride in aqueous solution proceeds more rapidly than the hydrolysis of acetic anhydride to acetic acid thus yielding 100% acetylated cyclic nucleotide. 2'0 substituted cyclic nucleotides have greater affinity for the antibody than the parent cyclic nucleotides because the antibody has been made to a protein conjugate coupled at the 2'0 position. This simple acetylation technique makes it possible to measure cyclic AMP and cyclic GMP in minute quantities of tissue without purification or concentration of the sample.     

Chemical modification studies on a lectin from winged-bean [Psophocarpus tetragonolobus (L.) DC] tubers.

The effect of chemical modification on a D(+)-galactose-specific lectin isolated from winged-bean tubers was investigated to identify the type of amino acid involved in its haemagglutinating activity. Various anhydrides of dicarboxylic acids, such as acetic anhydride, succinic anhydride, maleic anhydride and citraconic anhydride, modified 57-68% of the amino groups of the winged-bean tuber lectin. Treatment with N-acetylimidazole modified only 45% of the total amino groups. Reductive methylation of free amino groups modified 57% of the amino groups. Modification of the amino groups of the lectin by acetic anhydride and succinic anhydride did not lead to any significant change in the haemagglutinating activity (greater than or equal to 75% active). However, citraconylation and maleylation of the lectin led to a significant decrease in the haemagglutinating activity (less than or equal to 20% active). Acetylation and succinylation (3-carboxypropionylation) of the lectin led to a decrease in the pI value of the native lectin from approx. 9.5 to approx. 4.5. Treatment of the lectin with N-bromosuccinimide led to the modification of two and four tryptophan residues per molecule in the absence and in the presence of 8 M-urea respectively. The immunological identity of all the modified lectin preparations showed no gross structural changes except the lectin modified with N-bromosuccinimide in the presence of urea at pH 4.0.     

Acetylation and characterization of spruce (Picea abies) galactoglucomannans

Acetylated galactoglucomannans (GGMs) are the main hemicellulose type in most softwood species and can be utilized as, for example, bioactive polymers, hydrocolloids, papermaking chemicals, or coating polymers. Acetylation of spruce GGM using acetic anhydride with pyridine as catalyst under different conditions was conducted to obtain different degrees of acetylation on a laboratory scale, whereas, as a classic method, it can be potentially transferred to the industrial scale. The effects of the amount of catalyst and acetic anhydride, reaction time, temperature and pretreatment by acetic acid were investigated. A fully acetylated product was obtained by refluxing GGM for two hours. The structures of the acetylated GGMs were determined by SEC-MALLS/RI, ¹H and ¹³C NMR and FTIR spectroscopy. NMR studies also indicated migration of acetyl groups from O-2 or O-3 to O-6 after a heating treatment in a water bath. The thermal stability of the products was investigated by DSC-TGA.     

Preparation of sulfoacetate derivatives of cellulose by direct esterification

A new and efficient method for the preparation in one step of water-soluble cellulose acetate sulfate derivatives (CAS) is reported. Acetylation and sulfation were carried out simultaneously, using a mixture of acetic anhydride and sulfuric acid in glacial acetic acid. The reaction time and the amount of acetic anhydride were optimized and the method provided water-soluble esters, with a degree of acetylation in the range 1.6 and 2.4 and a degree of sulfation of 0.3. This method has been successfully applied to pure cellulose and to cellulose-enriched materials obtained from agricultural by-products. The product exhibited a high viscosity in aqueous solution suggesting interesting rheological properties.     

Synthesis and in vitro antimicrobial and antitumor activity of some nitrogen heterocycles

5-Phenyl-2-[(3,4,5-trimethoxybenzylidene)hydrazino]-thiazole and 3-[(3,4,5-trimethoxybenzylidene)amino]-4-oxoimidazolidin-2-thione were prepared by cyclization of 1-[(3,4,5-trimethoxybenzyliden)amino]-thiourea with phenacyl bromide and ethyl chloroacetate in the presence of fused sodium acetate. Acetylation of the synthesized compounds with acetic anhydride gave corresponding N-acetyl derivatives. Condensation of the synthesized thione with aromatic aldehydes yielded two 3-substituted 5-arylidene-4oxo-imidazolidin-2-thiones. Acetylation of the latter compounds with acetic anhydride afforded the corresponding N-acetyl-4-oxo-imidazolidin-2-thiones. Some of the synthesized compounds exhibited antimicrobial activity. The cytotoxic activity of the prepared thiazole and imidazolidin-2-thione derivatives was studied on several tumor cell lines.     

Breakdown of N-terminally modified peptides and an isopeptide by rumen microorganisms.

Treatment of Trypticase peptides with acetic anhydride, succinic anhydride, or maleic anhydride inhibited their breakdown to ammonia by rumen microorganisms by an average of 89% after 12 h of incubation in vitro. All three treatments gave similar protection. Acetylation also protected dipeptides containing lysine and methionine from degradation. However, more effective protection was obtained by linking lysine and methionine as N-epsilon-methionyl lysine.     

C-terminal sequencing method for peptides and proteins by the reaction with a vapor of perfluoric acid in acetic anhydride

A successive C-terminal amino acid truncation reaction of peptides and proteins with a vapor generated from a low-concentrated perfluoric acid in acetic anhydride is presented. The reaction products were analyzed with matrix-assisted laser desorption/ionization-time of flight mass-spectrometry giving molecular mass ions of the C-terminal truncated peptides or proteins from which the C-terminal sequence information can be deduced. Acetylation reaction preceded the truncation reaction in order to protect the amino groups and other reactive groups in peptides and proteins, and after the truncation reaction, hydration reaction was carried out to afford cleaner mass spectra.     

Anaerobic membrane reactor with phase separation for the treatment of cheese whey

Two-phase anaerobic digestion of cheese whey was investigated in a system consisting of a stirred acidogenic reactor followed by a stirred methanogenic reactor, the latter being coupled to a membrane filtration system to enable removal of soluble effluent whilst retaining solids. The acidogenic reactor was operated at a hydraulic retention time (HRT) of one day, giving maximum acidification of 52.25% with up to 5 g/l volatile fatty acids, of which 63.7% was acetic acid and 24.7% was propionic acid. The methanogenic reactor received an organic load up to 19.78 g COD/ld, corresponding to a HRT of 4 days, at which 79% CODs and 83% BOD(5) removal efficiencies were obtained. Average removals of COD, BOD(5) and TSS in the two-phase anaerobic digestion process were 98.5%, 99% and 100%, respectively. The daily biogas production exceeded 10 times reactor volume and biogas methane content was greater than 70%.     

Acetylglucagon: preparation and characterization.

Acetylated derivatives of glucagon have been prepared by reacting this hormone under various conditions with acetic anhydride. They have been chemically characterized by the use of a 14C-labeled reagent, by peptide mapping techniques following hydrolysis by pronase and chymotrypsin, and by spectroscopy. Acetylation in sodium acetate (pH 5.5) results in a full substitution of the alpha-amino group of the N-terminal histidyl residue, but in a partial (about 0.3 acetyl group per residue) substitution of the epsilon-amino group of the lysyl residue 12. The monosubstituted (on the alpha-amino group) and the disubstituted (on both amino groups) acetylated components have been separated by chromatography on DEAE-cellulose and CM-cellulose. Acetylation in sodium bicarbonate (pH 8.0) results in a complete substitution of both amino groups and of the hydroxyl groups of the tyrosyl residues 10 and 13. Complete deacetylation of the O-acetyltyrosyl residues occurs upon treatment with hydroxyl-amine. Mono, di and tetraacetylglucagon are homogeneous when analyzed by disc gel electrophoresis; di and tetrasubstituted derivatives show an increased mobility towards the anode. 125I-labeled derivatives of acetylglucagon show higher distribution coefficients in the aqueous two-phase dextran/poly(ethylene glycol) system than do similar derivatives of glucagon. Acetylation decreases in parallel the ability of glucagon to stimulate the activity of adenylate cyclase and to bind to its receptors in liver cell membranes of the rat. The biological potencies of the mono, di and tetrasubstituted derivates are, respectively, about 10, 1 and 0.1% that of native glucagon. The binding properties of the material dissociated from the acetylglucagon-receptor complex suggest that the reduction in biological activity results from a decrease in the intrinsic affinity of the modified glucagon for the receptors, as well as from the presence of small amounts of residual, unreacted glucagon. Studies with 125I-labeled derivatives of glucagon indicate that acetylation decreases the rate of association and increases the rate of dissociation of the hormone-receptor complex.     

Studies on d-erythrose and its acetates

Acetylation of an equilibrated solution of d-erythrose in pyridine yields a mixture containing mainly 1,2,3-tri-O-acetyl-α- and -β-D-erythrofuranose. If D- erthyrose is dissolved in pyridine and acetic anhydride is added immediately afterwards, acetylated dimers of D-erythrose are formed as well as the triacetates. An investigation of the structure and stereochemistry of these compounds is presented. The dimerization and trimerization of 2,4-O-ethylidene-D-erythrose is also studied.     

Acetylation of α-chitin in ionic liquids

Acetylation of α-chitin using acetic anhydride in an ionic liquid, 1-allyl-3-methylimidazolium bromide (AMIMBr), was performed. First, a mixture of chitin and AMIMBr (2% w/w) was heated at 100 °C for 24 h for dissolution. Then, acetic anhydride (5–20 equiv) was added to the solution and the mixture was heated with stirring at desired temperatures for 24 h. The product was precipitated by the addition of the reaction mixture into methanol. The IR spectrum of the product indicated the progress of acetylation. The degrees of substitution (DS), which were determined from the IR spectra, increased with increasing the amounts of acetic anhydride used for the reaction. The highest DS was 1.86, which was obtained by the reaction using 20 equiv of acetic anhydride at 100 °C. The product with this DS value was soluble in DMSO, and thus the structure of the product was further confirmed by ¹H NMR spectroscopy in DMSO-d₆. The DS value estimated by the integrated ratio of signals due to acetyl protons to a signal due to anomeric protons was in good agreement with that determined from the IR spectrum.     

Hydrolysis of triglyceride by the whole cell of Pseudomonas putida 3SK in two-phase batch and continuous reactors systems

Batch and continuous hydrolysis of olive oil in an organic-aqueous two-phase system using the live whole cell of Pseudomonas putida 3SK as a source of a lipase is investigated. The strain was not only fully viable and grown well, but also produced extracellular lipase simultaneously. The degree of hydrolysis, depending on olive oil concentration in the solvents, was maximal at 13.5% (w/v) and decreased with the increase of the substrate concentration. At the optimal condition, a degree of hydrolysis higher than 95% was achieved with 24 h at 30 degrees C when the reaction was carried out in a two-phase batch stirred reactor. For long-term operation a continuous stirred reactor was designed. When the reaction was carried out in a continuous stirred reactor, the degree was hydrolysis reached 86% at a dilution rate of 0.2 h(-1). Satisfactory performance of a two-phase bioreactor was obtained in a long-term continous operation, which lasted for at least 30 days by feeding organic solvent containing olive oil and aqueous media separately. (c) 1994 John Wiley & Sons, Inc.     

The omega-hydroxyceramides of pig epidermis are attached to corneocytes solely through omega-hydroxyl groups.

The cornified outer cells of mammalian epidermis possess a monolayer of omega-hydroxyceramides that are ester-linked to the exterior of a cross-linked protein envelope. In the present study, conclusive evidence was sought on which of the ceramide hydroxyl groups are involved in the linkage to protein. This was obtained by derivatizing all free hydroxyl groups in isolated solvent-extracted porcine stratum corneum using triisopropylsilyl (TIPS) chloride in pyridine in the presence of silver nitrate. After an 18-h reaction, the tissue was recovered, rinsed, and the derivatized ceramides were then released from protein linkage by hydrolysis with 1M KOH in 95% methanol. This gave a single ceramide product that was shown by nuclear magnetic resonance to contain two triisopropyl groups. Acetylation of the product using acetic anhydride in pyridine resulted in a downfield shift of the NMR signal for the omega-methylene protons, showing that it was the omega-hydroxyl that was free in the initial reaction product, and subsequently was acetylated.These results show that all of the omega-hydroxyceramides of corneocyte lipid envelopes are attached to protein through their omega-hydroxyl groups.     

Effect of acetylation on antioxidant and cytoprotective activity of polysaccharides isolated from pumpkin (Cucurbita pepo, lady godiva)

Acetylation of pumpkin (Cucurbita pepo, lady godiva variety) polysaccharide using acetic anhydride with pyridines as catalyst under different conditions was conducted to obtain different degrees of acetylation on a laboratory scale. Furthermore, antioxidant activities and cytoprotective effects of pumpkin polysaccharide and its acetylated derivatives were investigated employing various established in vitro systems. Results showed that addition of pyridine as catalyst could increase the degree of substitution, whereas volume of acetic anhydride had little effect. The acetylated polysaccharides in DPPH scavenging radical activity assay, superoxide anion radical activity assay and reducing power assay exhibited higher antioxidant activity than that of unmodified polysaccharide. H₂O₂-induced oxidative damages on rat thymic lymphocyte were also prevented by pumpkin polysaccharide and its acetylated derivatives and the derivatives presented higher protective effects. On the whole, acetylated polysaccharide showed relevant antioxidant activity both in vitro and in a cell system.     

Biofilm reactors for industrial bioconversion processes: employing potential of enhanced reaction rates

This article describes the use of biofilm reactors for the production of various chemicals by fermentation and wastewater treatment. Biofilm formation is a natural process where microbial cells attach to the support (adsorbent) or form flocs/aggregates (also called granules) without use of chemicals and form thick layers of cells known as "biofilms." As a result of biofilm formation, cell densities in the reactor increase and cell concentrations as high as 74 gL^-1 can be achieved. The reactor configurations can be as simple as a batch reactor, continuous stirred tank reactor (CSTR), packed bed reactor (PBR), fluidized bed reactor (FBR), airlift reactor (ALR), upflow anaerobic sludge blanket (UASB) reactor, or any other suitable configuration. In UASB granular biofilm particles are used. This article demonstrates that reactor productivities in these reactors have been superior to any other reactor types. This article describes production of ethanol, butanol, lactic acid, acetic acid/vinegar, succinic acid, and fumaric acid in addition to wastewater treatment in the biofilm reactors. As the title suggests, biofilm reactors have high potential to be employed in biotechnology/bioconversion industry for viable economic reasons. In this article, various reactor types have been compared for the above bioconversion processes.     

Acetylation of methyl 5-amino-1H-[1,2,4]triazole-3-carboxylate

Acetylation with acetic anhydride of methyl 5-amino-1H-[1,2,4]triazole-3-carboxylate, one of the hetareneamino acids, was studied using HPLC, H NMR, FTIR and GC-MS. The compound has a significantly decreased susceptibility to acetylation compared to 5-amino-1H-[1,2,4]triazole itself. Two isomeric diacetylated products were found.     

Isolation and identification of the intermediates during pyrazole formation of some carbohydrate hydrazone derivatives

Reaction of the oxidation product of L-ascorbic acid, dehydro-L-ascorbic acid, with o-phenylenediamine, followed by 2,4,6-trichlorophenylhydrazine (3) afforded 3-[1-(2,4,6-trichlorophenylhydrazono)-L-threo-2,3,4-trihydroxybut-1-yl]quinoxalin-2(1H)one (4), whose structure was deduced from studying its periodate oxidation, which gave the glyoxal derivative 3-[1-(2,4,6-trichlorophenylhydrazono)glyoxal-1-yl]quinoxalin-2(1H)one (5) that upon reduction afforded 3-[1-(2,4,6-trichlorophenylhydrazono)-2-hydroxyethy-1-yl]quinoxalin-2(1H)one (6). The reaction of 5 with 3 afforded the bishydrazone 3-[1,2-bis(2,4,6-trichlorophenylhydrazono)glyoxal-1-yl]quinoxalin-2(1H)one. The reaction of 5 with acetic anhydride in pyridine afforded the 2,3-dihydrofuro[2,3-b]quinoxaline derivative 2-acetoxy-3-[2-acetyl-2-(2,4,6-trichlorophenyl)hydrazono)]-2,3-dihydrofuro[2,3-b]quinoxaline. Acetylation of 4 with acetic anhydride in pyridine afforded the acyclic diacetate intermediate 3-[3,4-di-O-acetyl-2-deoxy-1-(2,4,6-trichlorophenylhydra-zono)but-2-en-1-yl]quinoxalin-2(1H)one (12), which was also obtained from the reaction of 4 with boiling acetic anhydride. Compound 12 rearranged under the reaction conditions to give the pyrazole derivatives 3-[5-(ace-toxymethyl)-1-(2,4,6-trichlorophenyl)pyrazol-3-yl]quinoxalin-2(1H)one (14) and 2-acetoxy-3-[5-(acetoxymethyl)-1-(2,4,6-trichlorophenyl)pyrazol-3-yl)]quinoxaline (15), as well as the 2,3-dihydrofuro[2,3-b]quinoxaline derivative 2-(2-acetoxyethen-2-yl)-3-[2-(2,4,6-trichlorophenyl)hydrazono]-2,3-dihydrofuro[2,3-b]quinoxaline. Acetylation of 3-[5-(hydroxymethyl)-l-(2,4,6-trichlorophenyl)pyrazol-3-yl]quinoxalin-2(1H)one (16) with acetic anhydride in pyridine or 12 with boiling acetic anhydride afforded 15 and 16, respectively. Treatment of 4 with diluted sodium hydroxide afforded the pyrazolo[2,3-b]quinoxaline (flavazole) derivative 1-(2,4,6-trichlorophenyl)-3-(L-threo-glycerol-1-yl)pyrazolo[2,3-b]quinoxaline whose acetylation afforded the acetyl derivative 3-(2,3,4-tri-O-acetyl-L-threo-glycerol-1-yl)-1-(2,4,6-trichlorophenyl)pyrazolo[2,3-b]quinoxaline. The assigned structures were based on spectral analysis. The activity of compound 4 against hepatitis B virus has been studied.     

A modification of neurotoxin RTX-III from Radianthus macrodactylus actinin with acetic anhydride

Upon modification of neurotoxin RTX-III at amino groups with [3H]acetic anhydride, four monoacetyl and four diacetyl derivatives have been obtained. Acetylation of the N-terminal amino group led to 12-fold decrease of toxicity in mice. Monoderivatives of the toxin with either Lys or two out of three C-terminal Lys residues modified showed a 2-fold drop in toxicity as compared with the native RTX-III. Diacetylation caused a 30 to 35-fold decrease in toxicity, the N-terminal amino group being modified in all the derivatives. As assessed by circular dichroism method, the modification of amino groups, except for N-terminal one, affected secondary structure of the toxin. The data suggest the N-terminal amino group to be essential for toxicity of RTX-III.     

The role of the 6 lysines and the terminal amine of Escherichia coli single-strand binding protein in its binding of single-stranded DNA

Differential chemical modification of the lysines and amino-terminus of Escherichia coli single-strand binding (SSB) protein was used to determine their roles in the binding of SSB to single-stranded DNA (ssDNA). A combination of isotope labeling and mass spectrometry was used to determine the rates at which SSB was acetylated by acetic anhydride. First, SSB was labeled by deuterated acetic anhydride for given lengths of time in the presence or absence of single-stranded ssDNA. Then, the protein was denatured and completely acetylated by nondeuterated acetic anhydride. Enzymatic digests of the completely acetylated, isotopically labeled SSB were analyzed by electrospray ionization mass spectrometry. The intensities of the deuterated and nondeuterated forms of acetylated peptides provided accurate quantification of the reactivity of the amines in native SSB, either free or bound to ssDNA. Acetylation rate constants were determined from time course measurements. In the absence of ssDNA, the terminal alpha-amine of SSB was 10-fold more reactive than Lys residues at positions 43, 62, 73, and 87. The reactivities of Lys 7 and 49 were much lower yet, suggesting that they have very limited access to solution under any condition. In the presence of ssDNA, the reactivities of the amino-terminus and Lys residues 43, 62, 73, and 87 were reduced by factors of 3.7-25, indicating that the environments around all of these amines is substantially altered by binding of SSB to ssDNA. Three of these residues are located near putative ssDNA binding sites, whereas Lys 87 is located at the monomer-monomer interface.     

Study of gaseous substrate fermentations: carbon monoxide conversion to acetate. 2. Continuous culture

The fermentation of gaseous substrates such as CO, H(2), and CO(2) may be performed in a continuous stirred tank reactor, as well as the traditional batch reactor. In this article, the conversion of carbon monoxide by Peptostreptococcus productus is demonstrated in a stirred tank reactor under both mass transfer-controlled and nonmass transfer-controlled conditions. Utilizing a non-steady-state procedure, intrinsic rates are evaluated under non-mass transfer-controlled conditions in a time period of only 5-6 hours. A steady-state procedure was used to evaluate CSTR performance under mass transfer-controlled conditions. The mass transfer coefficient was calculated, followed by the development of a model to predict CSTR behavior for this gas phase substrate.