Novel fast degradable thermosensitive polymeric micelles based on PEG-block-poly(N-(2-hydroxyethyl)methacrylamide-oligolactates)

The aim of this study was to design a thermosensitive polymeric micelle system with a relatively fast degradation time of around 1 day. These micelles are of interest for the (targeted) delivery of biologically active molecules. Therefore, N-(2-hydroxyethyl)methacrylamide-oligolactates (HEMAm-Lac(n)()) were synthesized and used as building blocks for biodegradable (block co) polymers. p(HEMAm-Lac(2)) is a thermosensitive polymer with a cloud point (CP) of 22 degrees C which could be lowered by copolymerization with HEMAm-Lac(4). The block copolymer PEG-b-((80%HEMAm-Lac(2))-(20%HEMAm-Lac(4))) self-assembled into compact spherical micelles with an average size of 80 nm above the CP of the thermosensitive block (6 degrees C). Under physiological conditions (pH 7.4; 37 degrees C), the micelles started to swell after 4 h and were fully destabilized within 8 h due to hydrolysis of the lactate side chains. Rapidly degrading thermosensitive polymeric micelles based on PEG-b-((80%HEMAm-Lac(2))-(20%HEMAm-Lac(4))) have attractive features as a (targeted) drug carrier system for therapeutic applications.     

Novel stimuli-responsive micelle self-assembled from Y-shaped P(UA-Y-NIPAAm) copolymer for drug delivery

A new amphiphilic Y-shaped copolymer, comprised of hydrophobic poly(undecylenic acid) (PUA) and hydrophilic poly(N-isopropylacrylamide) (PNIPAAm), was designed and synthesized. A cytotoxicity study revealed that P(UA-Y-NIPAAm) copolymers did not exhibit apparent inhibition impact on the proliferation of cells when the concentration of the copolymer was below 1000 mg/L. Characterization demonstrated that the P(UA-Y-NIPAAm) copolymer is thermosensitive with a lower critical solution temperature (LCST) of 31 degrees C. In water, the P(UA-Y-NIPAAm) copolymer would self-assemble into micelles with a critical micelle concentration (CMC) of 20 mg/L. Self-assembled P(UA-Y-NIPAAm) micelles exhibited a nanospherical morphology of 40 to approximately 80 nm in size. The controlled drug release behavior of the P(UA-Y-NIPAAm) micelles was further investigated, and self-assembled micelles exhibited improved properties in controlled drug release.     

Oxime linkage: a robust tool for the design of pH-sensitive polymeric drug carriers

Oxime bonds dispersed in the backbones of the synthetic polymers, while young in the current spectrum of the biomedical application, are rapidly extending into their own niche. In the present work, oxime linkages were confirmed to be a robust tool for the design of pH-sensitive polymeric drug delivery systems. The triblock copolymer (PEG-OPCL-PEG) consisting of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic oxime-tethered polycaprolactone (OPCL) was successfully prepared by aminooxy terminals of OPCL ligating with aldehyde-terminated PEG (PEG-CHO). Owing to its amphiphilic architecture, PEG-OPCL-PEG self-assembled into the micelles in aqueous media, validated by the measurement of critical micelle concentration (CMC). The MTT assay showed that PEG-OPCL-PEG exhibited low cytotoxicity against NIH/3T3 normal cells. Doxorubicin (DOX) as a model drug was encapsulated into the PEG-OPCL-PEG micelles. Drug release study revealed that the DOX release from micelles was significantly accelerated at mildly acid pH of 5.0 compared to physiological pH of 7.4, suggesting the pH-responsive feature of the drug delivery systems with oxime linkages. Flow cytometry and confocal laser scanning microscopy (CLSM) measurements indicated that these DOX-loaded micelles were easily internalized by living cells. MTT assay against HeLa cancer cells showed DOX-loaded PEG-OPCL-PEG micelles had a high anticancer efficacy. All of these results demonstrate that these polymeric micelles self-assembled from oxime-tethered block copolymers are promising carriers for the pH-triggered intracellular delivery of hydrophobic anticancer drugs.     

Norbornene derived doxorubicin copolymers as drug carriers with pH responsive hydrazone linker

The synthesis and complete characterization of both norbornene-derived doxorubicin (mono 1) and polyethylene glycol (mono 2) monomers are clearly described, and their copolymerization by ring-opening metathesis polymerization (ROMP) to get the block copolymer (COPY-DOX) is vividly elaborated. The careful design of these conjugates exhibits properties like well-shielded drug moieties and well-defined nanostructures; additionally, they show solubility in both water and biological medium and also have the important tendency of rendering acid-triggered drug release. The drug release profile suggests the importance of having the hydrazone linker that helps to release the drug exactly at the mild acidic conditions resembling the pH of the cancerous cells. It is also observed that the drug release from micelles of COPY-DOX is significantly accelerated at a mildly acidic pH of 5.5-6, compared to the physiological pH of 7.4, suggesting the pH-responsive feature of the drug delivery system with hydrazone linkages. Confocal laser scanning microscopy (CLSM) measurements indicate that these COPY-DOX micelles are easily internalized by living cells. MTT assays against HeLa and 4T cancer cells showing COPY-DOX micelles have a high anticancer efficacy. All of these results demonstrate that these polymeric micelles that self-assembled from COPY-DOX block copolymers have great scope in the world of medicine, and they also symbolize promising carriers for the pH-triggered intracellular delivery of hydrophobic anticancer drugs.     

Enhanced stability of polymeric micelles based on postfunctionalized poly(ethylene glycol)-b-poly(γ-propargyl L-glutamate): the substituent effect

One of the major obstacles that delay the clinical translation of polymeric micelle drug delivery systems is whether these self-assembled micelles can retain their integrity in blood following intravenous (IV) injection. The objective of this study was to evaluate the impact of core functionalization on the thermodynamic and kinetic stability of polymeric micelles. The combination of ring-opening polymerization of N-carboxyanhydride (NCA) with highly efficient "click" coupling has enabled easy and quick access to a family of poly(ethylene glycol)-block-poly(γ-R-glutamate)s with exactly the same block lengths, for which the substituent "R" is tuned. The structures of these copolymers were carefully characterized by (1)H NMR, FT-IR, and GPC. When pyrene is used as the fluorescence probe, the critical micelle concentrations (CMCs) of these polymers were found to be in the range of 10(-7)-10(-6) M, which indicates good thermodynamic stability for the self-assembled micelles. The incorporation of polar side groups in the micelle core leads to high CMC values; however, micelles prepared from these copolymers are kinetically more stable in the presence of serum and upon SDS disturbance. It was also observed that these polymers could effectively encapsulate paclitaxel (PTX) as a model anticancer drug, and the micelles possessing better kinetic stability showed better suppression of the initial "burst" release and exhibited more sustained release of PTX. These PTX-loaded micelles exerted comparable cytotoxicity against HeLa cells as the clinically approved Cremophor PTX formulation, while the block copolymers showed much lower toxicity compared to the cremophor-ethanol mixture. The present work demonstrated that the PEG-b-PPLG can be a uniform block copolymer platform toward development of polymeric micelle delivery systems for different drugs through the facile modification of the PPLG block.     

Synthesis of amphiphilic alternating polyesters with oligo(ethylene glycol) side chains and potential use for sustained release drug delivery

Novel amphiphilic alternating polyesters, poly((N-phthaloyl-l-glutamic anhydride)-co-(2-(2-(2-methoxyethoxy)ethoxy)methyl)oxirane) (P(PGA-co-ME(2)MO)), were synthesized by alternating copolymerization of PGA and ME(2)MO. The structures of the synthesized polyesters were characterized by (1)H NMR, (13)C NMR, FT-IR, and GPC analyses. Because of the presence of oligo(ethylene glycol) (OEG) side chains, the polyesters could self-assemble into thermosensitive micelles. Dynamic light scattering (DLS) showed that these micelles underwent thermoinduced size decrease without intermicellar aggregation. In vitro methyl thiazolyl tetrazolium (MTT) assay demonstrated that the polyesters were biocompatible to Henrietta Lacks (HeLa) cells, rendering their potential for drug delivery applications. Two hydrophobic drugs, rifampin and doxorubicin (DOX), were loaded into the polyester micelles and observed to be released in a zero-order sustained manner. The sustained release could be accelerated in lower pH or in the presence of proteinase K, due to the degradation of the polyester under these conditions. Remarkably, in vitro cell experiments showed that the polyester micelles accomplished fast release of DOX inside cells and higher anticancer efficacy as compared with the free DOX. With enhanced stability during circulation condition and accelerated drug release at the target sites (e.g., low pH or enzyme presence), these novel polyesters with amphiphilic structures are promising to be used in sustained release drug delivery systems.     

Core-cross-linked polymeric micelles as paclitaxel carriers

Cross-linkable di- and triblock copolymers of poly(epsilon-caprolactone) (PCL) and monomethoxyl poly(ethylene glycol) (MPEG) were synthesized. These amphiphilic copolymers self-assembled into nanoscale micelles capable of encapsulating hydrophobic paclitaxel in their hydrophobic cores in aqueous solutions. To further enhance their thermodynamic stability, the micelles were cross-linked by radical polymerization of the double bonds introduced into the PCL blocks. Reaction conditions were found to significantly affect both the cross-linking efficiency and the micelle size. The encapsulation of paclitaxel into the micelles was confirmed by the proton nuclear magnetic resonance (1H NMR) spectroscopy. Encouragingly, paclitaxel-loading efficiency of micelles was enhanced significantly upon micelle core-cross-linking. Both the micelle size and the drug loading efficiency increased markedly with increasing the PCL block lengths, no matter if the micelles were core-cross-linked or not. However, paclitaxel-loading did not obviously affect the micelle size or size distribution. The cross-linked micelles exhibited a significantly enhanced thermodynamic stability against dilution with aqueous solvents. The efficient cellular uptake of paclitaxel loaded in the nanomicelles was demonstrated by confocal laser scanning microscopy (CLSM) imaging. This new biodegradable nanoscale carrier system merits further investigations for parenteral drug delivery.     

Fabrication of multiresponsive shell cross-linked micelles possessing pH-controllable core swellability and thermo-tunable corona permeability

A double hydrophilic ABC triblock copolymer, poly(2-(diethylamino)ethyl methacrylate)-b-poly(2-(dimethylamino)ethyl methacrylate)-b-poly(N-isopropylacrylamide) (PDEA-b-PDMA-b-PNIPAM), containing the well-known pH-responsive PDEA block and thermoresponsive PNIPAM block, was synthesized by atom transfer radical polymerization via sequential monomer addition using ethyl 2-chloropropionate as the initiator. The obtained triblock copolymer exhibits interesting "schizophrenic" micellization behavior in aqueous solution, and supramolecularly self-assembles into three-layer "onion-like" PNIPAM-core micelles at acidic pH's and elevated temperatures and PDEA-core micelles with "inverted" structures at alkaline pH's and room temperature. In both cases, dynamic laser light scattering (LLS) and optical transmittance reveal the presence of near-monodisperse micelles, and the micelle formation/inversion process is fully reversible. Novel shell cross-linked (SCL) micelles with pH-responsive PDEA cores and thermoresponsive PNIPAM coronas were then facilely fabricated from the PDEA-b-PDMA-b-PNIPAM triblock copolymer by cross-linking the PDMA inner shells with 1,2-bis(2-iodoethoxy)ethane. The reversible pH-dependent swelling/shrinking of PDEA cores and thermosensitive collapse/aggregation of PNIPAM coronas of the obtained SCL micelles were investigated in detail by dynamic LLS, optical transmittance, and transmission electron microscopy. As the structurally stable SCL micelles possess pH-controllable core swellability and thermo-tunable corona permeability, the release profile of a model hydrophobic drug, dipyridamole, initially loaded within the hydrophobic PDEA core, can be dually controlled by both the solution pH and the temperature. This represents the first report of SCL micelles with multiresponsive cores and coronas, which may find practical applications in fields such as drug delivery and smart release.     

Supramolecular copolymer micelles based on the complementary multiple hydrogen bonds of nucleobases for drug delivery

Novel supramolecular copolymer micelles with stimuli-responsive abilities were successfully prepared through the complementary multiple hydrogen bonds of nucleobases and then applied for rapid intracellular release of drugs. First, both adenine-terminated poly(ε-caprolactone) (PCL-A) and uracil-terminated poly(ethylene glycol) (PEG-U) were synthesized. The supramolecular amphiphilic block copolymers (PCL-A:U-PEG) were formed based on multiple hydrogen bonding interactions between PCL-A and PEG-U. The micelles self-assembled from PCL-A:U-PEG were sufficiently stable in water but prone to fast aggregation in acidic condition due to the dynamic and sensitive nature of noncovalent interactions. The low cytotoxicity of supramolecular copolymer micelles was confirmed by MTT assay against NIH/3T3 normal cells. As a hydrophobic anticancer model drug, doxorubicin (DOX) was encapsulated into these supramolecular copolymer micelles. In vitro release studies demonstrated that the release of DOX from micelles was significantly faster at mildly acid pH of 5.0 compared to physiological pH. MTT assay against HeLa cancer cells showed DOX-loaded micelles had high anticancer efficacy. Hence, these supramolecular copolymer micelles based on the complementary multiple hydrogen bonds of nucleobases are very promising candidates for rapid controlled release of drugs.     

Synthesis and characterization of biodegradable and thermosensitive polymeric micelles with covalently bound doxorubicin-glucuronide prodrug via click chemistry

Doxorubicin is an anthracycline anticancer agent that is commonly used in the treatment of a variety of cancers, but its application is associated with severe side effects. Biodegradable and thermosensitive polymeric micelles based on poly(ethylene glycol)-b-poly[N-(2-hydroxypropyl) methacrylamide-lactate] (mPEG-b-p(HPMAmLac(n))) have been studied as drug delivery systems for therapeutic and imaging agents and have shown promising in vitro and in vivo results. The purpose of this study was to investigate the covalent coupling of a doxorubicin-glucuronide prodrug (DOX-propGA3) to the core of mPEG-b-p(HPMAmLac(2)) micelles. This prodrug is specifically activated by human β-glucuronidase, an enzyme that is overexpressed in necrotic tumor areas. To this end, an azide modified block copolymer (mPEG(5000)-b-p(HPMAmLac(2)-r-AzEMA)) was synthesized and characterized, and DOX-propGA3 was coupled to the polymer via click chemistry with a high (95%) coupling efficiency. Micelles formed by this DOX containing polymer were small (50 nm) and monodisperse and released 40% of the drug payload after 5 days incubation at 37 °C in the presence of β-glucuronidase, but less than 5% in the absence of the enzyme. In vitro cytotoxicity experiments demonstrated that DOX micelles incubated with 14C cells showed the same cytotoxicity as free DOX only in the presence of β-glucuronidase, indicating full conversion of the polymer-bound DOX into the parent drug. Overall, this novel system is very promising for enzymatically responsive anticancer therapy.     

Polysialic acid-based micelles for encapsulation of hydrophobic drugs

Despite improvements relative to unmodified counterparts, poly(ethylene glycol) (PEG) conjugation may not be the ideal solution for improving circulatory stability of current nanoparticle carriers or free drugs. Polysialic acid (PSA), a natural polymer for which the body possesses no receptors, has been conjugated directly to biologically active molecules to prevent premature clearance; however, this concept has not yet been applied to nanoparticle drug carrier systems. In the current study, PSA was modified with a long-chain hydrocarbon through reaction of the carboxylic acid side groups with N-decylamine (DA). The resultant PSA-DA conjugates self-assembled into micelles for encapsulation of hydrophobic drug molecules, as demonstrated with Cyclosporine A. Cytotoxicty was dependent on the degree of substitution with DA. On the basis of size and zeta potential, the micelles are capable of passively targeting diseased regions, such as cancer and inflammatory tissue. Further investigations are necessary to explore whether the PSA-based micelles possess stealth properties similar to those of PEG and to establish in vitro and in vivo efficacy.     

Synthesis, characterization, antitumor activity of pluronic mimicking copolymer micelles conjugated with doxorubicin via acid-cleavable linkage

Pluronic mimicking poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer having multiple hydroxyl groups in the PPO middle segment (core-functionalized Pluronic: CF-PLU) was synthesized for conjugation of doxorubicin (DOX). DOX was conjugated on the multiple hydroxyl groups of CF-PLU via an acid-labile hydrazone linkage (CF-PLU-DOX). In aqueous solution, CF-PLU-DOX copolymers self-assembled to form a core/shell-type micelle structure consisting of a hydrophobic DOX-conjugated PPO core and a hydrophilic PEO shell layer. The conjugated DOX from CF-PLU-DOX micelles was released out more rapidly at pH 5 than pH 7.4, indicating that the hydrazone linkage was cleaved under acidic condition. CF-PLU-DOX micelles exhibited greatly enhanced cytotoxicity for MCF-7 human breast cancer cells compared to naked DOX, while CF-PLU copolymer itself showed extremely low cytotoxicity. Flow cytometry analysis revealed that the extent of cellular uptake for CF-PLU-DOX micelles was greater than free DOX. Confocal image analysis also showed that CF-PLU-DOX micelles had a quite different intracellular distribution profile from free DOX. CF-PLU-DOX micelles were mainly distributed in the cytoplasm, endosomal/lysosomal vesicles, and nucleus, while free DOX was localized mainly within the nucleus, suggesting that CF-PLU-DOX micellar formulation might be advantageously used for overcoming the multidrug resistance (MDR) effect, which gradually develops in many tumor cells during repeated drug administration.     

Effect of cross-linking on the performance of micelles as drug delivery carriers: a cell uptake study

Poly(polyethylene glycol methyl ether methacrylate-co-methacrylic acid)-block-poly(methyl methacrylate) P(PEGMEMA-co-MAA)-b-PMMA block copolymer were prepared via RAFT (reversible addition-fragmentation chain transfer) polymerization and subsequently self-assembled into micelles as a drug delivery carrier for albendazole (ABZ). For comparison, the micelles were additionally cross-linked to study the effect of shell-cross-linking on the biological activity. The hydrodynamic diameter of cross-linked and un-cross-linked micelles was approximately 40 nm in both cases. While the cross-linked micelle was stable even in good solvents for both blocks, the un-cross-linked micelle was found to lose its integrity in cell growth media. Crosslinking had a major effect on the rate of drug release reducing it dramatically from 50% (uncrosslinked) to around 20% (crosslinked) over a 30 h incubation period. Both drug delivery systems were tested on human prostate cancer cells (PC-3, DU-145) and human ovarian cancer cells (OVCAR-3, A-2780). No toxic effects were measured with the unloaded micelle while the ABZ loaded un-cross-linked micelle lead to IC(50) values between 0.2 and 0.9 μM depending on the cell line. The IC(50) dropped to values between 0.006 and 0.06 μM, depending on cell line, once the micelles were stabilized by cross-linking. Three treatment cycles with ABZ for one day, followed by two days incubation in media using ABZ-loaded drug carriers led to complete cell death even at low concentrations in the case of the cross-linked micelle only. Cellular uptake has been studied using fluorescently labeled micelles and Nile red as model drug, showing cell uptake above the CMC but no micelle uptake below the CMC. Additional biological studies, such as colony formation assay and tubulin disorganization tests, were also performed to gain more insight into the effect of cross-linking of the shell of the micelle. In conclusion, shell-cross-linking is highly recommended, even for glassy micelles, for an efficient cellular uptake at low concentrations.     

Synthesis of amphiphilic tadpole-shaped linear-cyclic diblock copolymers via ring-opening polymerization directly initiating from cyclic precursors and their application as drug nanocarriers

We report on the facile synthesis of well-defined amphiphilic and thermoresponsive tadpole-shaped linear-cyclic diblock copolymers via ring-opening polymerization (ROP) directly initiating from cyclic precursors, their self-assembling behavior in aqueous solution, and the application of micellar assemblies as controlled release drug nanocarriers. Starting from a trifunctional core molecule containing alkynyl, hydroxyl, and bromine moieties, alkynyl-(OH)-Br, macrocyclic poly(N-isopropylacrylamide) (c-PNIPAM) bearing a single hydroxyl functionality was prepared by atom transfer radical polymerization (ATRP), the subsequent end group transformation into azide functionality, and finally the intramacromolecular ring closure reaction via click chemistry. The target amphiphilic tadpole-shaped linear-cyclic diblock copolymer, (c-PNIPAM)-b-PCL, was then synthesized via the ROP of ε-caprolactone (CL) by directly initiating from the cyclic precursor. In aqueous solution at 20 °C, (c-PNIPAM)-b-PCL self-assembles into spherical micelles consisting of hydrophobic PCL cores and well-solvated coronas of cyclic PNIPAM segments. For comparison, linear diblock copolymer with comparable molecular weight and composition, (l-PNIPAM)-b-PCL, was also synthesized. It was found that the thermoresponsive coronas of micelles self-assembled from (c-PNIPAM)-b-PCL exhibit thermoinduced collapse and aggregation at a lower critical thermal phase transition temperature (T(c)) compared with those of (l-PNIPAM)-b-PCL. Temperature-dependent drug release profiles from the two types of micelles of (c-PNIPAM)-b-PCL and (l-PNIPAM)-b-PCL loaded with doxorubicin (Dox) were measured, and the underlying mechanism for the observed difference in releasing properties was proposed. Moreover, MTT assays revealed that micelles of (c-PNIPAM)-b-PCL are almost noncytotoxic up to a concentration of 1.0 g/L, whereas at the same polymer concentration, micelles loaded with Dox lead to ～60% cell death. Overall, chain topologies of thermoresponsive block copolymers, that is, (c-PNIPAM)-b-PCL versus (l-PNIPAM)-b-PCL, play considerable effects on the self-assembling and thermal phase transition properties and their functions as controlled release drug nanocarriers.     

Synthesis and characterization of cationic micelles self-assembled from a biodegradable copolymer for gene delivery

We have recently reported biodegradable cationic micelles self-assembled from an amphiphilic copolymer, poly{(N-methyldietheneamine sebacate)-co-[(cholesteryl oxocarbonylamido ethyl)methyl bis(ethylene)ammonium bromide]sebacate} (P(MDS-co-CES)), which were utilized to deliver a drug and nucleic acid simultaneously, and a synergistic effect was achieved. In this paper, synthesis and characterization of the polymer is presented in details, focusing on micelle formation and DNA binding under various conditions, cytotoxicity, in-vitro degradation, and gene transfection in various cell lines. The polymer was degradable and formed micelles at very low concentrations even in an environment with high salt concentration. These micelles fabricated at pH 4.6 had an average size of less than 82 nm and zeta potential of up to 84 +/- 5 mV, displaying strong DNA binding ability. They induced high gene expression efficiency in various cell lines, which was significantly greater than poly(ethylenimine) (PEI) especially in 4T1 mouse and MDA-MB-231 human breast cancer cell lines, but they were less cytotoxic. These cationic micelles may provide a promising nonviral vector for gene delivery.     

Degradable disulfide core-cross-linked micelles as a drug delivery system prepared from vinyl functionalized nucleosides via the RAFT process

A nucleosides containing block copolymer, poly(polyethylene glycol methyl ether methacrylate)- block-poly(5'-O-methacryloyluridine) (PPEGMEMA 30- b-PMAU 80) was self-assembled in aqueous medium and cross-linked via RAFT polymerization at 60 degrees C to afford core-cross-linked micelles exhibiting a PPEGMEMA corona and a polynucleotide core. A disulfide cross-linking agent, bis(2-methacryloyloxyethyl)disulfide, was employed to cross-link the structure via the RAFT process resulting in core-shell nanoparticles, which can degrade under reductive conditions. The resulting core-cross-linked micelles readily hydrolyzed into free block copolymers in the presence of dithiothreitol (DTT) in less than 1 h, depending on the concentration of the reducing agent and the amount of cross-linker in the micelle. A small fraction of permanently cross-linked micelle was found as the result of conventional chain transfer to disulfide containing compounds. A model drug, vitamin B 2, was loaded into the micelle. The loading capacity increased with increasing cross-linking degree. The amount of drug released reached 60-70% after 7 h in the presence of DTT (0.65 mM), while the cross-linked micelle in the absence of dithiothreitol shows only a delayed drug release. Cytotoxicity tests confirmed the biocompatibility of the polymers and the residues after reduction.     

LHRH receptor-mediated delivery of siRNA using polyelectrolyte complex micelles self-assembled from siRNA-PEG-LHRH conjugate and PEI

Polyelectrolyte complex (PEC) micelles modified with cancer cell targeting moieties were prepared for intracellular delivery of vascular endothelial growth factor (VEGF) small interfering RNA (siRNA). A luteinizing hormone-releasing hormone (LHRH) peptide analogue was coupled as a cancer targeting ligand to the distal end of the poly(ethylene glycol) (PEG)-siRNA conjugate. The siRNA-PEG-LHRH conjugate self-assembled to form nanosized PEC micelles upon mixing with poly(ethylenimine) (PEI) via ionic interactions. The PEC micelles showed spherical morphology with a hydrodynamic diameter of ca. 150 nm. For LHRH receptor overexpressing ovarian cancer cells (A2780), the PEC micelles with LHRH exhibited enhanced cellular uptake compared to those without LHRH, resulting in increased VEGF gene silencing efficiency via receptor-mediated endocytosis. This study showed that PEC micelles decorated with specific cell-recognizable targeting ligands could be used for targeted delivery of siRNA.     

Biocompatible Phospholipid-Based Mixed Micelles for Tamoxifen Delivery: Promising Evidences from <Emphasis Type="Italic">In - Vitro</Emphasis> Anticancer Activity and Dermatokinetic Studies

Tamoxifen (TAM) is frequently prescribed for the management breast cancer, but is associated with the challenges like compromised aqueous solubility and poor bioavailability to the target site. It was envisioned to develop phospholipid-based mixed micelles to explore the promises offered by the biocompatible carriers. Various compositions were prepared, employing soya lecithin, polysorbate 80, sodium chloride/dextrose, and water, by self-assembled technique. The formulations were characterized for micromeritics and evaluated for in vitro drug release, hemolysis study, dermatokinetic studies on rodents, and cytotoxicity on MCF-7 cell lines. Cellular uptake of the system was also studied using confocal laser scanning microscopy. The selected composition was of sub-micron range (28.81?±?2.1 nm), with spherical morphology. During in-vitro studies, the mixed micelles offered controlled drug release than that of conventional gel. Cytotoxicity was significantly enhanced and IC₅₀ value was reduced that of the naïve drug. The bioavailability in epidermis and dermis skin layers was enhanced approx. fivefold and threefold, respectively. The developed nanosystem not only enhanced the efficacy of the drug but also maintained the integrity of skin, as revealed by histological studies. The developed TAM-nanocarrier possesses potential promises for safe and better delivery of TAM.     

Hyperbranched double hydrophilic block copolymer micelles of poly(ethylene oxide) and polyglycerol for pH-responsive drug delivery

We report the synthesis of a well-defined hyperbranched double hydrophilic block copolymer of poly(ethylene oxide)-hyperbranched-polyglycerol (PEO-hb-PG) to develop an efficient drug delivery system. In specific, we demonstrate the hyperbranched PEO-hb-PG can form a self-assembled micellar structure on conjugation with the hydrophobic anticancer agent doxorubicin, which is linked to the polymer by pH-sensitive hydrazone bonds, resulting in a pH-responsive controlled release of doxorubicin. Dynamic light scattering, atomic force microscopy, and transmission electron microscopy demonstrated successful formation of the spherical core-shell type micelles with an average size of about 200 nm. Moreover, the pH-responsive release of doxorubicin and in vitro cytotoxicity studies revealed the controlled stimuli-responsive drug delivery system desirable for enhanced efficiency. Benefiting from many desirable features of hyperbranched double hydrophilic block copolymers such as enhanced biocompatibility, increased water solubility, and drug loading efficiency as well as improved clearance of the polymer after drug release, we believe that double hydrophilic block copolymer will provide a versatile platform to develop excellent drug delivery systems for effective treatment of cancer.