Adaptation of the interspersed repetitive sequence polymerase chain reaction to the isolation of mouse DNA probes from somatic cell hybrids on a hamster background

A strategy for the rapid isolation of DNA probes from radiation-fusion Chinese hamster cell hybrids containing overlapping portions of the murine X chromosome based on the interspersed repetitive sequence polymerase chain reaction (IRS-PCR) previously used with human somatic cell hybrids has been developed. This specific amplification of mouse DNA on a hamster background depends on the use of primers directed to the B2 short interspersed repeat element family and the R repeat, from the long interspersed repeat element family, L1. Two sets of amplification conditions, which gave specific amplification of mouse DNA from either a mouse X-monochromosomal hybrid or irradiation-fusion hybrids having reduced X content, were defined. The mouse X-only chromosome hybrid yielded approximately 20 discrete reproducible bands, while the irradiation-fusion hybrids yielded between 1 and 10 discrete products. Comparison of different irradiation-fusion hybrids has allowed the definition of both specific and shared products corresponding to different regions within the overlapping X-chromosome fragments present within these hybrids. Use of such hybrids and the IRS-PCR technique has allowed the isolation of probes corresponding to the central region of the mouse X chromosome that contains the X-inactivation center. The method should be widely applicable to the isolation of mouse DNA sequences from mouse hybrid cell lines on either human or Chinese hamster backgrounds.     

Rapid cloning and characterization of new chromosome 10 DNA markers by Alu element-mediated PCR

Alu element-mediated polymerase chain reaction is a strategy for rapidly cloning and mapping human DNA markers from mixed DNA sources. A novel primer homologous to the 3' end of the human Alu repeat element provides the basis for preferential synthesis of human DNA fragments from human/rodent somatic cell hybrid DNA template. This approach has been used to isolate a series of new markers from chromosome 10. The Alu element-mediated PCR probes were regionally assigned on chromosome 10 by hybridization to Southern blots of Alu PCR-synthesized DNA derived from somatic cell hybrid template DNA. Alu element-mediated PCR is generally applicable and makes possible the analysis of complex genomes with a speed and sensitivity that has not been previously possible.     

Variation in genomic alu repeat density as a basis for rapid construction of low resolution physical maps of human chromosomes

Human DNA restriction fragments containing high numbers of Alu repeat sequences can be preferentially detected in the presence of other human DNA restriction fragments in DNA from human:rodent somatic cell hybrids when the DNA is fragmented with enzymes that cleave mammalian DNA infrequently. This ability to lower the observed human DNA complexity allowed us to develop an approach to order rapidly somatic hybrid cell lines retaining overlapping human genomic domains. The ordering process also generates a relative physical map of the human fragments detected with Alu probe DNA. This process can generate physical mapping information for human genomic domains as large as an entire chromosome (100,000 kb). The strategy is demonstrated by ordering Alu-detected NotI fragments in a panel of mouse:human hybrid cells that span the entire long arm of human chromosome 17.by L. Manuelidis     

Human repeat element-mediated PCR: cloning and mapping of chromosome 10 DNA markers.

Repeat element-mediated PCR can facilitate rapid cloning and mapping of human chromosomal region-specific DNA markers from somatic cell hybrid DNA. PCR primers directed to human repeat elements result in human-specific DNA synthesis; template DNA derived from a somatic cell hybrid containing the human chromosomal region of interest provides region specificity. We have generated a series of repeat element-mediated PCR clones from a reduced complexity somatic cell hybrid containing a portion of human chromosome 10. The cloning source retains the centromere and tightly linked flanking markers, plus additional chromosome 10 sequences. Twelve new inter-Alu, two inter-L1, and four inter-Alu/L1 repeat element-mediated PCR clones were mapped by hybridization to Southern blots of repeat element-mediated PCR products amplified from somatic cell hybrid DNA templates. Two inter-Alu clones mapped to the pericentromeric region. We propose that a scarcity of Alu elements in the pericentromeric region of chromosome 10 contributed to the low number of clones obtained from this region. One inter-Alu clone, pC11/A1S-6-c23, defines the D10S94 locus, which is tightly linked to MEN2A and D10Z1.     

"PCR-karyotype" of human chromosomes in somatic cell hybrids

Amplification of human DNA sequences in 16 monochromosomal somatic cell hybrids containing different human chromosomes were performed by the polymerase chain reaction (PCR) using primer directed at human-specific regions of Alu or L1, the two major classes of interspersed repetitive sequences (IRS-PCR). A chromosome-specific pattern of amplification products was observed on agarose gels run with ethidium bromide, producing a "PCR-karyotype." This simple gel analysis provides a rapid method for identifying and monitoring the human chromosomal content of monochromosomal somatic cell hybrids without conventional cytogenetic analysis. Hybrids containing multiple human chromosome produce complex gel patterns, but identification of chromosome content can be achieved by hybridization of PCR products against a reference panel of monochromosomal or highly reduced hybrids representing each human chromosome. This dot-blot method also enables identification of human marker chromosomes or translocated pieces in hybrids that are not identifiable by cytogenetic methods. These IRS-PCR methods should greatly reduce the need for more laborious cytogenetic, isozyme, and Southern blot characterizations of human-rodent cell hybrids.     

Retrieval of human DNA from rodent-human genomic libraries by a recombination process

Human Alu repeat ("BLUR") sequences have been cloned into the mini-plasmid vector piVX. The resulting piBLUR clones have been used to rescue selectively, by recombination, bacteriophage carrying human DNA sequences from genomic libraries constructed using DNA from rodent-human somatic cell hybrids. piBLUR clones are able to retrieve human clones from such libraries because at least one Alu family repeat is present on most 15 to 20 kb fragments of human DNA and because of the relative species-specificity of the sequences comprising the Alu family. The rapid, selective plaque purification achieved results in the construction of a collection of recombinant phage carrying diverse human DNA inserts from a specific subset of the human karyotype. Subfragments of two recombinants rescued from a mouse-human somatic cell hybrid containing human chromosomes X, 10, 13, and 22 were mapped to human chromosomes X and 13, respectively, demonstrating the utility of this protocol for the isolation of human chromosome-specific DNA sequences from appropriate somatic cell hybrids.     

Isolation of DNA fragments from a human chromosomal subregion by Alu PCR differential hybridization

The recent advent of Alu element-mediated PCR (Alu PCR) allows the rapid isolation of human-specific fragments from mixed DNA sources. This technique greatly facilitates the isolation of DNA fragments from specific regions of the human genome. We report a novel technique utilizing Alu PCR products as differential hybridization probes to isolate human DNA fragments from a chromosomal subregion. We used the Alu PCR products from a pair of somatic cell hybrids in which the human DNA content differs only in the 5q11.2-q13.3 region as differential hybridization probes. One hybrid (GM10114) retains an intact chromosome 5, while the other (HHW1064) contains a chromosome 5 deleted for the q11.2-q13.3 region. Phage from a flow-sorted chromosome 5 library were hybridized with the Alu PCR synthesis product from the chromosome 5 hybrid. Positively hybridizing phage were then screened with the Alu PCR product from the deletion 5 hybrid. Phage that hybridized to the Alu PCR product of the chromosome 5 hybrid but did not hybridize to the Alu PCR product of the deletion 5 hybrid were further characterized. We isolated five phage from 5q11.2-q13.3 using this differential hybridization procedure. Only one of these phage corresponded to a detectable difference between the ethidium bromide-stained Alu PCR products of the two somatic cell hybrids. This technique should be applicable to any somatic cell hybrid-deletion hybrid pair.     

Isolation of DNA markers from a region between incontinentia pigmenti 1 (IP1) X-chromosomal translocation breakpoints by a comparative PCR analysis of a radiation hybrid subclone mapping panel.

A strategy based on the use of human-specific interspersed repetitive sequence (IRS)-PCR amplification was used to isolate regional DNA markers in the vicinity of the incontinentia pigmenti 1 (IP1) locus. A radiation hybrid (RH) resulting from a fusion of an irradiated X-only somatic cell hybrid (C12D) and a thymidine kinase deficient (TK-) hamster cell line (a23) was identified as containing multiple X chromosome fragments, including DNA markers spanning IP1 X-chromosomal translocation breakpoints within region Xp11.21. From this RH, a panel of subclones was constructed and analyzed by IRS-PCR amplification to (a) identify subclones containing a reduced number of X chromosome fragments spanning the IP1 breakpoints and (b) construct a mapping panel to assist in identifying regional DNA markers in the vicinity of the IP1 locus. By using this strategy, we have isolated three different IRS-PCR amplification products that map to a region between IP1 X chromosome translocation breakpoints. A total of nine DNA sequences have now been mapped to this region; using these DNA markers for PFGE analyses, we obtained a probe order DXS14-DXS422-MTHFDL1-DXS705. These DNA markers provide a starting point for identifying overlapping genomic sequences spanning the IP1 translocation breakpoints; the availability of IP1 translocation breakpoints should assist the molecular analysis of this locus.     

Chromosome-specific subfamilies within human alphoid repetitive DNA

Nucleotide sequence data of about 20 X 10(3) base-pairs of the human tandemly repeated alphoid DNA are presented. The DNA sequences were determined from 45 clones containing EcoRI fragments of alphoid DNA isolated from total genomic DNA. Thirty of the clones contained a complete 340 base-pair dimer unit of the repeat. The remaining clones contained alphoid DNA with fragment lengths of 311, 296, 232, 170 and 108 base-pairs. The sequences obtained were compared with an average alphoid DNA sequence determined by Wu & Manuelidis (1980). The divergences ranged from 0.6 to 24.6% nucleotide changes for the first monomer and from 0 to 17.8% for the second monomer of the repeat. On the basis of identical nucleotide changes at corresponding positions, the individual repeat units could be shown to belong to one of several distinct subfamilies. The number of nucleotide changes defining a subfamily generally constitutes the majority of nucleotide changes found in a member of that subfamily. From an evaluation of the proportion of the total amount of alphoid DNA, which is represented by the clones studied, it is estimated that the number of subfamilies of this repeat may be equal to or exceed the number of chromosomes. The expected presence of only one or a few distinct subfamilies on individual chromosomes is supported by the study, also presented, of the nucleotide sequence of 17 cloned fragments of alphoid repetitive DNA from chromosome 7. These chromosome-specific repeats all contain the characteristic pattern of 36 common nucleotide changes that defines one of the subfamilies described. A unique restriction endonuclease (NlaIII) cleavage site present in this subfamily may be useful as a genetic marker of this chromosome. A family member of the interspersed Alu repetitive DNA was also isolated and sequenced. This Alu repeat has been inserted into the human alphoid repetitive DNA, in the same way as the insertion of an Alu repeat into the African green monkey alphoid DNA.     

The human chromosome content in human x rodent somatic cell hybrids analyzed by a screening technique using Alu PCR

The ubiquitous nature of the Alu sequence throughout the human genome forms the basis of an assay we present here for analyzing the human chromosome content of human x rodent somatic cell hybrids. A human-specific Alu primer was used both to amplify sequences and to 32P label the products in a polymerase chain reaction (PCR) technique. Unlabeled inter-Alu PCR products from two series of human x rodent hybrids were used to prepare dot blots which were probed with labeled inter-Alu products prepared from between 10(3) and 10(4) hybrid cells. In the first series we demonstrate that a labeled inter-Alu probe from the hybrid DL18ts, containing a single chromosome 18, on a dot blot hybridized only with those inter-Alu products containing chromosome 18. Similar specificity for human chromosome 5 was shown when a Southern blot of the PCR products was hybridized with a probe made from the hybrid HHW 213, which contains only chromosome 5p. Using a dot blot from a second series of control hybrids, 15 of which contained single human chromosomes, hybridization of a labeled probe from the hybrid 18X4-1 was shown to react specifically with the controls that expressed chromosome 18. Application of the technique reported here allows simple and rapid characterization of the human chromosome content in human x rodent hybrids.     

A novel and rapid method for isolating sequences adjacent to rare cutting sites and their use in physical mapping.

We describe a simple PCR based technique which can be used to isolate sequences adjacent to rare cutter sites and can subsequently be employed for the construction of long range physical maps. The method involves the ligation of an adaptor to rare cutter sequences and its use as a target for forward priming in PCR. Primers to Alu repeat elements initiate synthesis of the reverse strand. Using this technique any rare cutter site which has a repeat element within amplification range can be cloned. We have isolated six unique sequences around NotI sites from an irradiation reduced hybrid containing a fragment of human chromosome 22 and are using these for physical mapping around the Ewing's sarcoma translocation breakpoint on chromosome 22.     

Cloning and genetic mapping of wheat telomere-associated sequences

Wheat telomere-associated sequences (TASs) were cloned using a Vectorette approach and sequenced. Reverse primers specific to the TASs were combined with labelled degenerate telomere primers in PCR reactions containing total genomic DNA as template. Amplification products were separated on sequencing gels. In total, seventeen primer combinations provided 47 polymorphic fragments. Nine of these mapped beyond the most distal RFLP markers and defined the ends of seven chromosome arms. Seven of the nine terminal fragments were derived from a 118-bp tandem repeat, indicating that subtelomeric tandem repeat sequences provide an efficient means to target chromosome ends. A telomere cloning strategy and the terminal and interstitial location of TASs are discussed. Received: 13 September 1996 / Accepted: 22 January 1997     

In situ hybridization of PCR amplified inter-Alu sequences from a hybrid cell line

Summary Polymerase chain reaction amplified products promoted by oligonucleotides complementary to the highly repetitive human Alu sequence can be used for in situ hybridization on metaphase chromosomes to investigate the human content of a hybrid cell line. The TC65 primer, which combines the advantages of promoting the amplification of large inter-Alu sequences together with only small flanking Alu sequences, enables a simple and precise characterization to be made, with a high signal to noise ratio. Total human DNA is an efficient competitor in the removal of non-specific signals. The use of this oligonucleotide should be considered in the characterization of the human content of hybrids or in the generation of specific reagents for chromosome decoration.     

Analysis of DNA of higher primates using inter-SINE PCR

Two types (MIR and Alu) of short interspersed repeated DNA sequences (SINEs) were used for analysis of genetic relationships among higher primates, and for detection of polymorphism in human genomic DNA. The DNA regions located between the neighboring copies of these SINEs were amplified in polymerase chain reaction with primers complementary to the MIR and Alu consensus sequences (inter-SINE PCR). Comparison of the sets of amplified DNA fragments for different species or individuals provides evaluation of the relationships among them. Using inter-MIR PCR technique, the relationships among the higher primates of the infraorder Catarrhini reported elsewhere were confirmed, pointing to the efficiency of the method for phylogenetic studies. No human DNA polymorphism was revealed with the help of inter-MIR PCR. This polymorphism was detected by means of inter-Alu PCR, which is probably associated with the continuing amplification of Alu elements in human genome.     

Analysis of DNA of higher primates using inter-SINE PCR

Two types (MIR and Alu) of short interspersed repeated DNA sequences (SINEs) were used for analysis of genetic relationships among higher primates, and for detection of polymorphism in human genomic DNA. The DNA regions located between the neighboring copies of these SINEs were amplified in polymerase chain reaction with primers complementary to the MIR and Alu consensus sequences (inter-SINE PCR). Comparison of the sets of amplified DNA fragments for different species or individuals provides evaluation of the relationships among them. Using inter-MIR PCR technique, the relationships among the higher primates of the infraorder Catarrhini reported elsewhere were confirmed, pointing to the efficiency of the method for phylogenetic studies. No human DNA polymorphism was revealed with the help of inter-MIR PCR. This polymorphism was detected by means of inter-Alu PCR, which is probably associated with the continuing amplification of Alu elements in human genome.     

Enrichment for histone H3 lysine 9 methylation at Alu repeats in human cells

The aim of this study was to identify in human cells common targets of histone H3 lysine 9 (H3-Lys9) methylation, a modification that is generally associated with gene silencing. After chromatin immunoprecipitation using an H3-Lys9 methylated antibody, we cloned the recovered DNA and sequenced 47 independent clones. Of these, 38 clones (81%) contained repetitive elements, either short interspersed transposable element (SINE or Alu elements), long terminal repeat (LTR), long interspersed transposable element (LINE), or satellite region (ALR/Alpha) DNA, and three additional clones were near Alu elements. Further characterization of these repetitive elements revealed that 32 clones (68%) were Alu repeats, corresponding to both old Alu (23 clones) and young Alu (9 clones) subfamilies. Association of H3-Lys9 methylation was confirmed by chromatin immunoprecipitation-PCR using conserved Alu primers. In addition, we randomly selected 5 Alu repeats from the recovered clones and confirmed association with H3-Lys9 by PCR using primer sets flanking the Alu elements. Treatment with the DNA methyltransferase inhibitor 5-aza-2'-deoxycytidine rapidly decreased the level of H3-Lys9 methylation in the Alu elements, suggesting that H3-Lys9 methylation may be related to the suppression of Alu elements through DNA methylation. Thus H3-Lys9 methylation is enriched at human repetitive elements, particularly Alu elements, and may play a role in the suppression of recombination by these elements.     

Uracil DNA glycosylase-mediated cloning of polymerase chain reaction-amplified DNA: application to genomic and cDNA cloning.

A simple and rapid method for cloning of amplification products directly from the polymerase chain reaction (PCR) has been developed. The method is based on the addition of a 12-base dUMP-containing sequence (CUACUACUACUA) to the 5' end of PCR primers. Incorporation of these primers during PCR results in the selective placement of dUMP residues into the 5' end of amplification products. Selective degradation of the dUMP residues in the PCR products with uracil DNA glycosylase (UDG) disrupts base pairing at the termini and generates 3' overhangs. Annealing of 3' protruding termini to vector DNA containing complementary 3' ends results in chimeric molecules which can be transformed, with high efficiency, without in vitro ligation. Directional cloning of PCR products has also been accomplished by incorporating different dU-containing sequences at the end of each PCR primer. Substitution of all dT residues in PCR primers with dU eliminates cloning of aberrant "primer dimer" products and enriches cloning of genuine PCR products. The method has been applied to cloning of inter-Alu DNA sequences from human placental DNA. Using a single primer, DNA sequences between appropriately oriented Alu sequences were amplified and cloned. Cloning of cDNA for the glyceraldehyde-3'-phosphate dehydrogenase gene from rat brain RNA was also demonstrated. The 3' end region of this gene was amplified by the 3' RACE method and the amplified DNA was cloned after UDG digestion. Characterization of cloned DNAs by sequence analysis showed accurate repair of the cloning junctions. The ligase-free cloning method with UDG should prove to be a widely applicable procedure for rapid cloning of PCR-amplified DNA.