Cobalt(II) Oxidation by the Marine Manganese(II)-Oxidizing Bacillus sp. Strain SG-1

The geochemical cycling of cobalt (Co) has often been considered to be controlled by the scavenging and oxidation of Co(II) on the surface of manganese [Mn(III,IV)] oxides or manganates. Because Mn(II) oxidation in the environment is often catalyzed by bacteria, we have investigated the ability of Mn(II)-oxidizing bacteria to bind and oxidize Co(II) in the absence of Mn(II) to determine whether some Mn(II)-oxidizing bacteria also oxidize Co(II) independently of Mn oxidation. We used the marine Bacillus sp. strain SG-1, which produces mature spores that oxidize Mn(II), apparently due to a protein in their spore coats (R.A. Rosson and K. H. Nealson, J. Bacteriol. 151:1027-1034, 1982; J. P. M. de Vrind et al., Appl. Environ. Microbiol. 52:1096-1100, 1986). A method to measure Co(II) oxidation using radioactive ⁵⁷Co as a tracer and treatments with nonradioactive (cold) Co(II) and ascorbate to discriminate bound Co from oxidized Co was developed. SG-1 spores were found to oxidize Co(II) over a wide range of pH, temperature, and Co(II) concentration. Leucoberbelin blue, a reagent that reacts with Mn(III,IV) oxides forming a blue color, was found to also react with Co(III) oxides and was used to verify the presence of oxidized Co in the absence of added Mn(II). Co(II) oxidation occurred optimally around pH 8 and between 55 and 65°C. SG-1 spores oxidized Co(II) at all Co(II) concentrations tested from the trace levels found in seawater to 100 mM. Co(II) oxidation was found to follow Michaelis-Menten kinetics. An Eadie-Hofstee plot of the data suggests that SG-1 spores have two oxidation systems, a high-affinity-low-rate system (K_m, 3.3 × 10^-8 M; V_max, 1.7 × 10^-15 M · spore^-1 · h^-1) and a low-affinity-high-rate system (K_m, 5.2 × 10^-6 M; V_max, 8.9 × 10^-15 M · spore^-1 · h^-1). SG-1 spores did not oxidize Co(II) in the absence of oxygen, also indicating that oxidation was not due to abiological Co(II) oxidation on the surface of preformed Mn(III,IV) oxides. These results suggest that some microorganisms may directly oxidize Co(II) and such biological activities may exert some control on the behavior of Co in nature. SG-1 spores may also have useful applications in metal removal, recovery, and immobilization processes.     

Heat Killing of Bacillus subtilis Spores in Water Is Not Due to Oxidative Damage

The heat resistance of wild-type spores of Bacillus subtilis or spores (termed α⁻β⁻) lacking DNA protective α/β-type small, acid-soluble spore proteins was not altered by anaerobiosis or high concentrations of the free radical scavenging agents ethanethiol and ethanedithiol. Heat-killed wild-type and α⁻β⁻ spores exhibited no increase in either protein carbonyl content or oxidized bases in DNA. These data strongly suggest that oxidative damage to spore macromolecules does not contribute significantly to spore killing by heat.     

Recovery of Spores from Thermophilic Dairy Bacilli and Effects of Their Surface Characteristics on Attachment to Different Surfaces

Spores from four Geobacillus spp. were isolated from a milk powder manufacturing line in New Zealand. Liquid sporulation media produced spore yields of ~10⁷ spores ml⁻¹; spores were purified using a two-phase system created with polyethylene glycol 4000 and 3 M phosphate buffer. The zeta potentials of the spores from the four isolates ranged from −10 to −20 mV at neutral pH, with an isoelectric point between pH 3 and 4. Through contact angle measurements, spores were found to be hydrophilic and had relative hydrophobicity values of 10 to 40%, as measured by the microbial adhesion to hexadecane assay. The most hydrophilic spore isolate with the smallest negative charge attached in the highest numbers to Thermanox and stainless steel (1 × 10⁴ spores cm⁻²), with fewer spores attaching to glass (3 × 10³ spores cm⁻²). However, spores produced by the other three strains attached in similar numbers (P > 0.05) to all substrata (~1 × 10³ spores cm⁻²), indicating that there was no simple relationship between individual physicochemical interactions and spore adherence. Therefore, surface modifications which limit the attachment of one strain may not be effective for all stains, and control regimens need to be devised with reference to the characteristics of the particular strains of concern.     

Assessment of Elasticity and Topography of Aspergillus nidulans Spores via Atomic Force Microscopy

Previous studies have described both surface morphology and adhesive properties of fungal spores, but little information is currently available on their mechanical properties. In this study, atomic force microscopy (AFM) was used to investigate both surface topography and micromechanical properties of Aspergillus nidulans spores. To assess the influence of proteins covering the spore surface, wild-type spores were compared with spores from isogenic rodA⁺ and rodA⁻ strains. Tapping-mode AFM images of wild-type and rodA⁺ spores in air showed characteristic “rodlet” protein structures covering a granular spore surface. In comparison, rodA⁻ spores were rodlet free but showed a granular surface structure similar to that of the wild-type and rodA⁺ spores. Rodlets were removed from rodA⁺ spores by sonication, uncovering the underlying granular layer. Both rodlet-covered and rodlet-free spores were subjected to nanoindentation measurements, conducted in air, which showed the stiffnesses to be 110 ± 10, 120 ± 10, and 300 ± 20 N/m and the elastic moduli to be 6.6 ± 0.4, 7.0 ± 0.7, and 22 ± 2 GPa for wild-type, rodA⁺ and rodA⁻ spores, respectively. These results imply the rodlet layer is significantly softer than the underlying portion of the cell wall.     

Reaerosolization of Fluidized Spores in Ventilation Systems

This project examined dry, fluidized spore reaerosolization in a heating, ventilating, and air conditioning duct system. Experiments using spores of Bacillus atrophaeus, a nonpathogenic surrogate for Bacillus anthracis, were conducted to delineate the extent of spore reaerosolization behavior under normal indoor airflow conditions. Short-term (five air-volume exchanges), long-term (up to 21,000 air-volume exchanges), and cycled (on-off) reaerosolization tests were conducted using two common duct materials. Spores were released into the test apparatus in turbulent airflow (Reynolds number, 26,000). After the initial pulse of spores (approximately 10¹⁰ to 10¹¹ viable spores) was released, high-efficiency particulate air filters were added to the air intake. Airflow was again used to perturb the spores that had previously deposited onto the duct. Resuspension rates on both steel and plastic duct materials were between 10⁻³ and 10⁻⁵ per second, which decreased to 10 times less than initial rates within 30 min. Pulsed flow caused an initial spike in spore resuspension concentration that rapidly decreased. The resuspension rates were greater than those predicted by resuspension models for contamination in the environment, a result attributed to surface roughness differences. There was no difference between spore reaerosolization from metal and that from plastic duct surfaces over 5 hours of constant airflow. The spores that deposited onto the duct remained a persistent source of contamination over a period of several hours.     

Proton and copper adsorption to maize and soybean root cell walls

A surface complexation model which has been used to describe inner-sphere complexation on metal oxide surfaces was applied to the adsorption of Cu by isolated cell walls of 4-day and 28-day-old maize (Zea mays L. cv WF9 × Mo17) and 21-day-old soybean (Glycine max [L.] Merr. cv Dare) roots. Concentration dependence of the titration data prevented the determination of unique pK and capacitance values for the 4-day maize cell walls, though mean values obtained for the intrinsic pK of the titratable carboxyl groups were 3.0 (4-day maize), 3.6 (28-day maize), and 3.0 (21-day soybean) as determined by potentiometric titration with either NaOH or HCl in 20 millimolar NaCl. The constant capacitance model was applied to Cu sorption data from rapid batch equilibrium experiments in an ionic medium of 20 millimolar NaClO₄. Speciation calculations indicated that the formation of a bidentate surface complex was sufficient to describe the experimental data for all three types of plant material, with only one value for the pK and capacitance density. The intrinsic constants of Cu complexation by a neutral site are: log K = −0.3 ± 0.1, −0.2 ± 0.3, and 0.9 ± 0.1 for 4-day and 28-day maize, and 21-day soybean, respectively. The integral capacitance density parameter, which describes the relationship between surface charge density and electrical potential, is several times larger than for crystalline mineral surfaces. This result indicates that the surface electrical potential remains low even when the surface charge density is high. Such behavior is characteristic of gels and porous oxides.     

Molecular Insights into the pH-Dependent Adsorption and Removal of Ionizable Antibiotic Oxytetracycline by Adsorbent Cyclodextrin Polymers

Effects of pH on adsorption and removal efficiency of ionizable organic compounds (IOCs) by environmental adsorbents are an area of debate, because of its dual mediation towards adsorbents and adsorbate. Here, we probe the pH-dependent adsorption of ionizable antibiotic oxytetracycline (comprising OTCH₂ ⁺, OTCH^±, OTC⁻, and OTC²⁻) onto cyclodextrin polymers (CDPs) with the nature of molecular recognition and pH inertness. OTCH^± commonly has high adsorption affinity, OTC⁻ exhibits moderate affinity, and the other two species have negligible affinity. These species are evidenced to selectively interact with structural units (e.g., CD cavity, pore channel, and network) of the polymers and thus immobilized onto the adsorbents to different extents. The differences in adsorption affinity and mechanisms of the species account for the pH-dependent adsorption of OTC. The mathematical equations are derived from the multiple linear regression (MLR) analysis of quantitatively relating adsorption affinity of OTC at varying pH to adsorbent properties. A combination of the MLR analysis for OTC and molecular recognition of adsorption of the species illustrates the nature of the pH-dependent adsorption of OTC. Based on this finding, γ-HP-CDP is chosen to adsorb and remove OTC at pH 5.0 and 7.0, showing high removal efficiency and strong resistance to the interference of coexisting components.     

Small, Acid-Soluble Spore Proteins of the α/β Type Do Not Protect the DNA in Bacillus subtilis Spores against Base Alkylation

Ethyl methanesulfonate (EMS) killed wild-type Bacillus subtilis spores as rapidly as spores lacking small, acid-soluble proteins (SASP) of the α/β type (α⁻β⁻ spores), and 20% of the survivors had obvious mutations. A recA mutation increased the EMS sensitivity of wild-type and α⁻β⁻ spores similarly but reduced their mutagenesis; EMS treatment of dormant spores also resulted in the induction of RecA synthesis during spore germination. EMS generated similar levels of alkylated bases in wild-type and α⁻β⁻ spore DNAs, in purified DNA, or in DNA saturated with α/β-type SASP. Ethylene oxide (EtO) also generated similar levels of base alkylation in wild-type and α⁻β⁻ spore DNAs. These data indicate that EMS and EtO kill spores at least in part by DNA damage but that α/β-type SASP, which protect DNA against many types of damage, do not protect spore DNA from base alkylation.     

Applied Usage of Yeast Spores as Chitosan Beads

In this study, we present a nonhazardous biological method of producing chitosan beads using the budding yeast Saccharomyces cerevisiae. Yeast cells cultured under conditions of nutritional starvation cease vegetative growth and instead form spores. The spore wall has a multilaminar structure with the chitosan layer as the second outermost layer. Thus, removal of the outermost dityrosine layer by disruption of the DIT1 gene, which is required for dityrosine synthesis, leads to exposure of the chitosan layer at the spore surface. In this way, spores can be made to resemble chitosan beads. Chitosan has adsorptive features and can be used to remove heavy metals and negatively charged molecules from solution. Consistent with this practical application, we find that spores are capable of adsorbing heavy metals such as Cu²⁺, Cr³⁺, and Cd²⁺, and removal of the dityrosine layer further improves the adsorption. Removal of the chitosan layer decreases the adsorption, indicating that chitosan works as an adsorbent in the spores. Besides heavy metals, spores can also adsorb a negatively charged cholesterol derivative, taurocholic acid. Furthermore, chitosan is amenable to chemical modifications, and, consistent with this property, dit1Δ spores can serve as a carrier for immobilization of enzymes. Given that yeast spores are a natural product, our results demonstrate that they, and especially dit1Δ mutants, can be used as chitosan beads and used for multiple purposes.     

Emission rate of charged spores in basidiomycetous fungi and the relaxation time of their electric charges

Basidiospores are one of the main components of coarse fraction of atmospheric aerosol. Majority of them, the ballistospores of 20,000 species of Basidiomycotina, carry electrostatic charges when getting airborne. To study the polarity and magnitude of primary charges and the hymenial emission rate of charged spores, 128 spore samples of 31 species of Agaricomycetes were collected in natural conditions. A portable device was placed under the fruiting body and the freely falling charged spores were extracted from the air by a horizontal homogeneous electrostatic field. The charge polarity distribution was the same in all intraspecies spore samples; it was unipolar-positive, unipolar-negative, or bipolar, depending on the species. The mean spore charge magnitude was 21–981 e, and it was not related to the emission rate of charged spores. The hymenial emission rate was fluctuating, and the maximum value was 715 charged spores cm^?2 s^?1. To estimate the territorial emission rate of charged spores, area of the hymenial surface per hectare of forest was calculated for three species and the maximum values were 11 m² ha^?1 and 8.6 × 10⁷ charged spores ha^?1 s^?1. Calculations showed that a spore charge diminished sevenfold within 47 min. Ecologists, health and agricultural scientists could be interested in this information. It could be useful by investigating the role of microorganisms in meteorological phenomena and in atmospheric processes in general.     

Localization of Mn(II)-oxidizing activity and the putative multicopper oxidase,MnxG, to the exosporium of the marine Bacillus sp. strain SG-1

Dormant spores of the marine Bacillus sp. strain SG-1 catalyze the oxidation of manganese(II), thereby becoming encrusted with insoluble Mn(III,IV) oxides. In this study, it was found that the Mn(II)-oxidizing activity could be removed from SG-1 spores using a French press and recovered in the supernatant following centrifugation of the spores. Transmission electron microscopy of thin sections of SG-1 spores revealed that the ridged outermost layer was removed by passage through the French press, leaving the remainder of the spore intact. Comparative chemical analysis of this layer with the underlying spore coats suggested that this outer layer is chemically distinct from the spore coat. Taken together, these results indicate that this outer layer is an exosporium. Previous genetic analysis of strain SG-1 identified a cluster of genes involved in Mn(II) oxidation, the mnx genes. The product of the most downstream gene in this cluster, MnxG, appears to be a multicopper oxidase and is essential for Mn(II) oxidation. In this study, MnxG was overexpressed in Escherichia coli and used to generate polyclonal antibodies. Western blot analysis demonstrated that MnxG is localized to the exosporium of wild-type spores but is absent in the non-oxidizing spores of transposon mutants within the mnx gene cluster. To our knowledge, Mn(II) oxidation is the first oxidase activity, and MnxG one of the first gene products, ever shown to be associated with an exosporium.     

The effects of surface and macromolecular interactions on the kinetics of inactivation of trypsin and α-chymotrypsin

The autolysis of trypsin and α-chymotrypsin is accelerated in the presence of colloidal silica and glass surfaces. It is proposed that adsorption of the enzymes (favoured by electrostatic factors) results in a conformational change that renders the adsorbed enzyme more susceptible to proteolytic attack. Although the adsorbed enzymes are more susceptible to proteolysis, their activity towards low-molecular-weight substrates is not affected, indicating a relatively minor conformational change on adsorption. The rates of autolysis in solution (i.e. in `inert' vessels) are second-order for both trypsin and α -chymotrypsin, with rate constants of 13.0mol<sup>−1</sup>·dm<sup>3</sup>·s<sup>−1</sup> for trypsin (in 50mm-NaCl at pH8.0 at 25°C) and 10.2mol<sup>−1</sup>·dm<sup>3</sup>·s<sup>−1</sup> for α-chymotrypsin (in 0.1m-glycine at pH9.2 at 30°C). In glass vessels or in the presence of small areas of silica surface (as colloidal silica particles), the autolysis of both trypsin and α-chymotrypsin can show first-order kinetics. Under these conditions, saturation of the surface occurs and the fast surface proteolytic reaction controls the overall kinetic order. However, when greater areas of silica surface are present, saturation of the surface does not occur, and, since for a considerable portion of the adsorption isotherm the amount adsorbed is approximately proportional to the concentration in solution, second-order kinetics are again observed. A number of negatively charged macromolecules have been shown similarly to increase the rate of autolysis of trypsin: thus this effect, observed initially with glass and silica surfaces, is of more general occurrence when these enzymes adsorb on or interact with negatively charged surfaces and macromolecules. These observations explain the confusion in the literature with regard to the kinetics of autolysis of α-chymotrypsin, where first-order, second-order and intermediate kinetics have been reported. A further effect of glass surfaces and negatively charged macromolecules is to shift the pH–activity curve of trypsin to higher pH values, as a consequence of the effective decrease in pH in the `microenvironment' of the enzyme associated with the negatively charged surface or macromolecule.     

Manganese Oxidation by Spores and Spore Coats of a Marine Bacillus Species

Bacillus sp. strain SG-1 is a marine bacterial species isolated from a near-shore manganese sediment sample. Its mature dormant spores promote the oxidation of Mn²⁺ to MnO₂. By quantifying the amounts of immobilized and oxidized manganese, it was established that bound manganese was almost instantaneously oxidized. When the final oxidation of manganese by the spores was partly inhibited by NaN₃ or anaerobiosis, an equivalent decrease in manganese immobilization was observed. After formation of a certain amount of MnO₂ by the spores, the oxidation rate decreased. A maximal encrustment was observed after which no further oxidation occurred. The oxidizing activity could be recovered by reduction of the MnO₂ with hydroxylamine. Once the spores were encrusted, they could bind significant amounts of manganese, even when no oxidation occurred. Purified spore coat preparations oxidized manganese at the same rate as intact spores. During the oxidation of manganese in spore coat preparations, molecular oxygen was consumed and protons were liberated. The data indicate that a spore coat component promoted the oxidation of Mn²⁺ in a biologically catalyzed process, after adsorption of the ion to incipiently formed MnO₂. Eventually, when large amounts of MnO₂ were allowed to accumulate, the active sites were masked and further oxidation was prevented.     

Effect of high concentration of nutrients onBacillus thuringiensis cultures

Summary Bacterial insecticide production using a strain ofBacillus thuringiensis var. kurstaki was studied in batch culture considering the influence of increasing concentration of components of a glucose — yeast extract — mineral salts medium.It was found that spore counts were increased from 1.08×10¹² spores. 1^–1 to 7.36×10¹² spores. 1^–1 and toxin level from 1.05 mg.ml^–1 to 6.85 mg.ml^–1, when the concentration of glucose was increased from 8 to 56 (g 1^–1), with the corresponding increase in the rest of medium components. Higher concentration of nutrients inhibit either spore count or toxin production.Preliminary experiments of fed-batch cultures which allows the use of high amounts of nutrients were also carried out. In this case spore counts of 1.2×10¹³ spores.1^–1 were achieved.     

Manganese binding and oxidation by spores of a marine bacillus.

Mature, dormant spores of a marine bacillus, SG-1, bound and oxidized (precipitated) manganese on their surfaces. The binding and oxidation occurred under dormant conditions, with mature spores suspended in natural seawater. These heat-stable spores were formed in the absence of added manganese in the growth medium. The rate and amount of manganese bound by SG-1 spores was a function of spore concentration. Temperatures greater than 45 degrees C, pH values below 6.5, or the addition of EDTA or the metabolic inhibitors sodium azide, potassium cyanide, and mercuric chloride inhibited manganese binding and oxidation. However, SG-1 spores bound and oxidized manganese after treatment with glutaraldehyde, formaldehyde, ethylene oxide gas, or UV light, all of which killed the spores. Manganese oxidation never occurred in the absence of manganese binding to spores. The data suggest that Mn2+ was complexed by a spore component, perhaps an exosporium or a spore coat protein: once bound, the manganese was rapidly oxidized.     

Biosorption of Methylene Blue by De-Oiled Algal Biomass: Equilibrium,Kinetics and Artificial Neural Network Modelling

The main objective of the present study is to effectively utilize the de-oiled algal biomass (DAB) to minimize the waste streams from algal biofuel by using it as an adsorbent. Methylene blue (MB) was used as a sorbate for evaluating the potential of DAB as a biosorbent. The DAB was characterized by SEM, FTIR, pH_PZC, particle size, pore volume and pore diameter to understand the biosorption mechanism. The equilibrium studies were carried out by variation in different parameters, i.e., pH (2–9), temperature (293.16–323.16 K), biosorbent dosage (1–10 g L⁻¹), contact time (0–1,440 min), agitation speed (0–150 rpm) and dye concentration (25–2,500 mg L⁻¹). MB removal was greater than 90% in both acidic and basic pH. The optimum result of MB removal was found at 5–7 g L⁻¹ DAB concentration. DAB removes 86% dye in 5 minutes under static conditions and nearly 100% in 24 hours when agitated at 150 rpm. The highest adsorption capacity was found 139.11 mg g⁻¹ at 2,000 mg L⁻¹ initial MB concentration. The process attained equilibrium in 24 hours. It is an endothermic process whose spontaneity increases with temperature. MB biosorption by DAB follows pseudo-second order kinetics. Artificial neural network (ANN) model also validates the experimental dye removal efficiency (R² = 0.97) corresponding with theoretically predicted values. Sensitivity analysis suggests that temperature and agitation speed affect the process most with 23.62% and 21.08% influence on MB biosorption, respectively. Dye adsorption capacity of DAB in fixed bed column was 107.57 mg g⁻¹ in preliminary study while it went up to 139.11 mg g⁻¹ in batch studies. The probable mechanism for biosorption in this study is chemisorptions via surface active charges in the initial phase followed by physical sorption by occupying pores of DAB.     

Force Required to Detach Conidia of Helminthosporium maydis

The force required to break the conidium-conidiophore attachment in Helminthosporium maydis was measured by centrifugation and by a small jet of air. The force which removed half the spores from their stalks was found by both methods to be about 1 × 10⁻² dynes. The corresponding speed of the air jet was about 10 m/sec. Although spores are removed over a range of applied force, most of this spread is accounted for by the variation in spore size. Therefore, the apparent strength of the attachment of conidia to conidiophores, though relatively large, is surprisingly uniform.     

Adsorption of Cu(II) on Oxidized Multi-Walled Carbon Nanotubes in the Presence of Hydroxylated and Carboxylated Fullerenes

The adsorption of Cu(II) on oxidized multi-walled carbon nanotubes (oMWCNTs) as a function of contact time, pH, ionic strength, temperature, and hydroxylated fullerene (C₆₀(OH)_n) and carboxylated fullerene (C₆₀(C(COOH)₂)_n) were studied under ambient conditions using batch techniques. The results showed that the adsorption of Cu(II) had rapidly reached equilibrium and the kinetic process was well described by a pseudo-second-order rate model. Cu(II) adsorption on oMWCNTs was dependent on pH but independent of ionic strength. Compared with the Freundlich model, the Langmuir model was more suitable for analyzing the adsorption isotherms. The thermodynamic parameters calculated from temperature-dependent adsorption isotherms suggested that Cu(II) adsorption on oMWCNTs was spontaneous and endothermic. The effect of C₆₀(OH)_n on Cu(II) adsorption of oMWCNTs was not significant at low C₆₀(OH)_n concentration, whereas a negative effect was observed at higher concentration. The adsorption of Cu(II) on oMWCNTs was enhanced with increasing pH values at pH < 5, but decreased at pH ≥ 5. The presence of C₆₀(C(COOH)₂)_n inhibited the adsorption of Cu(II) onto oMWCNTs at pH 4–6. The double sorption site model was applied to simulate the adsorption isotherms of Cu(II) in the presence of C₆₀(OH)_n and fitted the experimental data well.     

Analysis of Metabolism in Dormant Spores of Bacillus Species by 31P Nuclear Magnetic Resonance Analysis of Low-Molecular-Weight Compounds

This work was undertaken to obtain information on levels of metabolism in dormant spores of Bacillus species incubated for weeks at physiological temperatures. Spores of Bacillus megaterium and Bacillus subtilis strains were harvested shortly after release from sporangia and incubated under various conditions, and dormant spore metabolism was monitored by ³¹P nuclear magnetic resonance (NMR) analysis of molecules including 3-phosphoglyceric acid (3PGA) and ribonucleotides. Incubation for up to 30 days at 4, 37, or 50°C in water, at 37 or 50°C in buffer to raise the spore core pH from ∼ 6.3 to 7.8, or at 4°C in spent sporulation medium caused no significant changes in ribonucleotide or 3PGA levels. Stage I germinated spores of Bacillus megaterium that had slightly increased core water content and a core pH of 7.8 also did not degrade 3PGA and accumulated no ribonucleotides, including ATP, during incubation for 8 days at 37°C in buffered saline. In contrast, spores incubated for up to 30 days at 37 or 50°C in spent sporulation medium degraded significant amounts of 3PGA and accumulated ribonucleotides, indicative of RNA degradation, and these processes were increased in B. megaterium spores with a core pH of ∼7.8. However, no ATP was accumulated in these spores. These data indicate that spores of Bacillus species stored in water or buffer at low or high temperatures exhibited minimal, if any, metabolism of endogenous compounds, even when the spore core pH was 7.8 and core water content was increased somewhat. However, there was some metabolism in spores stored in spent sporulation medium.     

Electrostatic properties of cells estimated by absorption and fluorescence spectroscopy

A colloid titration method was used to determine the surface charge of cells of a human colon adenocarcinoma cell line WiDr; 6.2±0.8×10⁸ charges per cell were found. The apparent surface charge density was calculated using the cell surface area estimated by a Coulter counter. Alternatively, the lower limit of the cell surface area was estimated by visible microscopy. The same procedure was applied for human skin fibroblasts, resulting in the value 9.4±1.1×10⁸ charges per cell. This is significantly higher (p<0.05) than that of WiDr cells, presumably because of the different size of the cells. According to the estimations using the Coulter counter, the median diameter was higher in the case of skin fibroblasts. Fluorimetric titration of the fluorescent probe U-6 was used to estimate the interfacial potential of the WiDr cells. A shift of the titration curve of the U-6 probe toward higher pH values compared to that in pure buffer solutions was found in the presence of the WiDr cells. From the displacement of the midpoints of the titration curves, the interfacial potential of the WiDr cells was found to be about−35.8 mV. Incubation of the cells at two different pH values (7.4 and 6.8) did not result in any significant modification of the electrostatic properties of the cells under the experimental conditions of the present study. Electron microscopy revealed a distinct difference in the surface morphology of the WiDr cells compared to human skin fibroblasts. Numerous microvilli present on the surface of WiDr cells indicated marked uncertainties in cell surface area estimations. This gives large uncertainties in the real surface charge densities of cells.