Purification and characterization of pectin lyase secreted by <Emphasis Type="Italic">Penicillium citrinum</Emphasis>

The importance of various parameters such as sugarcane juice concentration, pH of the medium, and effects of different solid supports for maximum secretion of pectin lyase from Penicillium citrinum MTCC 8897 has been studied. The enzyme was purified to homogeneity by Sephadex G-100 and DEAE-cellulose chromatography. The molecular mass determined by SDS-PAGE was 31 kDa. The K _m and k _cat values were found to be 1 mg/ml and 76 sec⁻¹, respectively. The optimum pH of the purified pectin lyase was 9.0, though it retains activity in the pH 9.0–12.0 range when exposed for 24 h. The optimum temperature was 50°C, and the pectin lyase was found to be completely stable up to 40°C when exposed for 1 h. The purified pectin lyase was found efficient in retting of Linum usitatissimum, Cannabis sativa, and Crotalaria juncea. Published in Russian in Biokhimiya, 2009, Vol. 74, No. 7, pp. 985–992.     

Continuous production of neo-fructooligosaccharides by immobilization of whole cells of <Emphasis Type="Italic">Penicillium citrinum</Emphasis>

To produce neo-fructooligosaccharides (neo-FOSs) in a 500ml continuous packed-bed reactor using whole cell immobilization of Penicillium citrinum KCCM 11663, the optimum reaction conditions were 50 °C, pH 6 with 600 g sucrose l^-1 being fed as substrate at 1.3 ml min^-1 . Under these conditions, the maximum neo-FOSs production was 49 g l^-1. In a packed-bed reactor, continuous production of neo-FOSs was possible for 50 d indicating a potential for industrial production. Revisions requested 6 September 2004/14 October 2004; Revisions received 7 October 2004/29 November 2004     

Effect of triton X-100 on compactin production from<Emphasis Type="Italic">Penicillium citrinum</Emphasis>

Glucose alone was found to be the most effective carbon source for producing compactin. An initial glucose concentration of 40 g/L gave the highest compactin concentration of 250 mg/L. Among the various nitrogen sources, when 5 g/L of pharmamedia and soybean meal as the sole nitrogen source were used, respectively, the compactin concentration was higher than 250 mg/L. Especially, in the case of the mixture of 6 g/L of pharmamedia and 8 g/L of soybean meal, the compactin concentration was 400 mg/L. To select the best surfactant for effective compactin production, various surfactants were investigated. When Triton X-100 was used, the maximum compactin concentration was 445 mg/L. With the initial concentration ranging from 1.5 to 2.0 g/L, the compactin concentration was the highest at 465–450 g/L. The cell concentration was similar to that of the control without the addition of Triton X-100. On the other hand, when the above 4.0 g/L of Triton X-100 were used, the cell concentration decreased. Using the based results the continuous fed-batch cultures by adding the Triton X-100 were carried out for 10 days in an air-lift bioreactor. When 1.5 g/L of Triton X-100 was added to the culture broth at 0, 4, and 8 days of culture, respectively, the compactin production was increased with the increase of culture time. The maximum compactin concentration after 10 days of culture was 1,200 mg/L, which was about 2.0-fold higher than that of the control without the addition of Triton X-100.     

Engineering of NADPH-dependent aldo-keto reductase from <Emphasis Type="Italic">Penicillium citrinum</Emphasis> by directed evolution to improve thermostability and enantioselectivity

Penicillium citrinum β-keto ester reductase (KER) can catalyze the reduction of methyl 4-bromo-3-oxobutyrate (BAM) to methyl (S)-4-bromo-3-hydroxybutyrate with high optical purity. To improve the thermostability of KER, protein engineering was performed using error-prone polymerase chain reaction-based random mutagenesis. Variants with the highest levels of thermostability contained the single amino acid substitutions L54Q, K245R, and N271D. The engineered L54Q variant of KER retained 62% of its initial activity after heat treatment at 30°C for 6 h, whereas wild-type KER showed only 15% activity. The L54Q substitution also conferred improved enantioselectivity by KER. An Escherichia coli cell biocatalyst that overproduced the L54Q mutant of KER and glucose dehydrogenase as a cofactor regeneration enzyme showed the highest level of BAM reduction in a water/butyl acetate two-phase system.     

Regulatory activity of heterologous gene-activator <Emphasis Type="Italic">xlnR</Emphasis> of <Emphasis Type="Italic">Aspergillus niger</Emphasis> in <Emphasis Type="Italic">Penicillium canescens</Emphasis>

The gene encoding the xlnR xylanolytic activator of the heterologous fungus Aspergillus niger was incorporated into the Penicillium canescens genome. Integration of the xlnR gene resulted in the increase in a number of activities, i.e. endoxylanase, β-xylosidase, α-L-arabinofuranosidase, α-galactosidase, and feruloyl esterase, compared to the host P. canescens PCA 10 strain, while β-galactosidase, β-glucosidase, endoglucanase, and CMCase activities remained constant. Two different expression constructs were developed. The first consisted of the nucleotide sequence containing the mature P. canescens phytase gene under control of the axhA promoter region gene encoding A. niger (1,4)-β-D-arabinoxylan-arabinofuranohydrolase. The second construct combined the P. canescens phytase gene and the bgaS promoter region encoding homologous β-galactosidase. Both expression cassettes were transformed into P. canescens host strain containing xlnR. Phytase synthesis was observed only for strains with the bgaS promoter on arabinose-containing culture media. In conclusion, the bgaS and axhA promoters were regulated by different inducers and activators in the P. canescens strain containing a structural tandem of the axhA promoter and the gene of the xlnR xylanolytic activator.     

High-yield spore production from <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> by solid state fermentation

Bacillus licheniformis was grown for 48 h at 37°C in solid state fermentation; a maximum of 1.7 × 10¹¹ spores/g dry substrate were obtained using rice straw powder (300 g/kg) and wheat bran (700 g/kg) supplemented with glucose (40 g/kg), peptone (20 g/kg), yeast extract (20 g/kg), KH₂PO₄ (10 g/kg) and CaO (5 g/kg) with an initial moisture content of 65%.     

Phylogenetic analyses of <Emphasis Type="Italic">Uromyces viciae-fabae</Emphasis> and its varieties on <Emphasis Type="Italic">Vicia</Emphasis>, <Emphasis Type="Italic">Lathyrus</Emphasis>, and <Emphasis Type="Italic">Pisum</Emphasis> in Japan

A pea rust fungus, Uromyces viciae-fabae, has been classified into two varieties, var. viciae-fabae and var. orobi, based on differences in urediniospore wall thickness and putative host specificity in Japan. In principal component analyses, morphological features of urediniospores and teliospores of 94 rust specimens from Vicia, Lathyrus, and Pisum did not show definite host-specific morphological groups. In molecular analyses, 23 Uromyces specimens from Vicia, Lathyrus, and Pisum formed a single genetic clade based on D1/D2 and ITS regions. Four isolates of U. viciae-fabae from V. cracca and V. unijuga could infect and sporulate on P. sativum. These results suggest that U. viciae-fabae populations on different host plants are not biologically differentiated into groups that can be recognized as varieties.Contribution no. 184, Laboratory of Plant Parasitic Mycology, Institute of Agriculture and Forestry, University of Tsukuba, Japan     

Overexpression of the <Emphasis Type="Italic">plg</Emphasis>1 gene encoding pectin lyase in <Emphasis Type="Italic">Penicillium griseoroseum</Emphasis>

The pectin lyase (PL) is an industrially important enzyme since it is used for maceration and clarification in the process of fruit juice production in food industries. In order to increase the yields of pectin lyase we cloned the plg1 (pectin lyase 1) from Penicillium griseoroseum gene under the control of the strong constitutive promoter of the glyceraldehyde-3-phosphate dehydrogenase gene (gpdA) and the terminator region of the tryptophan synthetase (trpC) gene from Aspergillus nidulans (plasmid pAN52-Plg1) and transformed this construct into the P. griseoroseum strain PG63. One of the pAN52-Plg1 multi-copy transformants (strain 105) grown in culture medium containing glucose or sugar cane juice showed PL activities of 4,804 or 5,202 U ml⁻¹ respectively, which represented 57- and 132-fold increases. In addition, the apparent specific activity of PL produced by this strain was much higher than the one observed for a commercial pectinase preparation. Evaluation of the extracellular proteins in the culture supernatant of strain 105 by SDS-PAGE showed the presence of a clear and strong band of approximately 40 kDa that probably corresponds to PL. The enzyme yields reported here demonstrate that the system we developed is able to express pectin lyase at levels comparable to, or exceeding, previously reported data.     

Purification and characterization of lignin peroxidases from <Emphasis Type="Italic">Penicillium decumbens</Emphasis> P6

Summary Peroxidases are essential enzymes in biodegradation of lignin and lignite which have been investigated intensively in the white-rot fungi. This is the first report of purification and characterization of lignin peroxidase from Penicillium sp. P6 as lignite degradation fungus. The results indicated that the lignin peroxidase of Penicillium decumbens P6 had physical and chemical properties and a N-terminal amino acid sequence different from the lignin peroxidases of white-rot fungi. The lignin peroxidase was isolated from a liquid culture of P. decumbens P6. This enzyme had a molecular weight of 46.3 KDa in SDS-PAGE and exhibited greater activity, temperature stability and wider pH range than those previously reported. The isolation procedure involved (NH₄)₂SO₄ precipitation, ion-exchange chromatography on DEAE-cellulose and CM-cellulose, gel filtration on Sephadex G-100, and non-denaturing, discontinuous polyacrylamide gel electrophoresis. The K _m and V _max values of this enzyme using veratryl alcohol as substrate were 0.565 mmol L ⁻¹ and 0.088 mmol (mg protein) ⁻¹ min ⁻¹ respectively. The optimum pH of P6 lignin peroxidase was 4.0, and 70.6 of the relative activity was remained at pH 9.0. The optimum temperature of the enzyme was 45 °C.     

Quantitative study of interactions between <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> and <Emphasis Type="Italic">Oenococcus </Emphasis><Emphasis Type="Italic">oeni</Emphasis> strains

This study examines the interactions that occur between Saccharomyces cerevisiae and Oenococcus oeni strains during the process of winemaking. Various yeast/bacteria pairs were studied by applying a sequential fermentation strategy which simulated the natural winemaking process. First, four yeast strains were tested in the presence of one bacterial strain leading to the inhibition of the bacterial component. The extent of inhibition varied widely from one pair to another and closely depended on the specific yeast strain chosen. Inhibition was correlated to weak bacterial growth rather than a reduction in the bacterial malolactic activity. Three of the four yeast strains were then grown with another bacteria strain. Contrary to the first results, this led to the bacterial stimulation, thus highlighting the importance of the bacteria strain. The biochemical profile of the four yeast fermented media exhibited slight variations in ethanol, SO(2) and fatty acids produced as well as assimilable consumed nitrogen. These parameters were not the only factors responsible for the malolactic fermentation inhibition observed with the first bacteria strain. The stimulation of the second has not been reported before in such conditions and remains unexplained.     

The <Emphasis Type="Italic">Caenorhabditis</Emphasis><Emphasis Type="Italic">briggsae</Emphasis> genome contains active <Emphasis Type="Italic">CbmaT1</Emphasis> and <Emphasis Type="Italic">Tcb1</Emphasis> transposons

The maT clade of transposons is a group of transposable elements intermediate in sequence and predicted protein structure to mariner and Tc transposons, with a distribution thus far limited to a few invertebrate species. We present evidence, based on searches of publicly available databases, that the nematode Caenorhabditis briggsae has several maT-like transposons, which we have designated as CbmaT elements, dispersed throughout its genome. We also describe two additional transposon sequences that probably share their evolutionary history with the CbmaT transposons. One resembles a fold back variant of a CbmaT element, with long (380-bp) inverted terminal repeats (ITRs) that show a high degree (71%) of identity to CbmaT1. The other, which shares only the 26-bp ITR sequences with one of the CbmaT variants, is present in eight nearly identical copies, but does not have a transposase gene and may therefore be cross mobilised by a CbmaT transposase. Using PCR-based mobility assays, we show that CbmaT1 transposons are capable of excising from the C. briggsae genome. CbmaT1 excised approximately 500 times less frequently than Tcb1 in the reference strain AF16, but both CbmaT1 and Tcb1 excised at extremely high frequencies in the HK105 strain. The HK105 strain also exhibited a high frequency of spontaneous induction of unc-22 mutants, suggesting that it may be a mutator strain of C. briggsae.     

<Emphasis Type="Italic">Funastrum rupicola</Emphasis> (<Emphasis Type="Italic">Apocynaceae:</Emphasis><Emphasis Type="Italic">Asclepiadoideae</Emphasis>), a new species from Bolivia

Summary   Funastrum rupicola Goyder, a new species of Apocynaceae: Asclepiadoideae from Bolivia, is described and illustrated. The conservation status of this species is assessed.     

Production and optimization of thermophilic alkaline protease in solid-state fermentation by <Emphasis Type="Italic">Streptomyces</Emphasis> sp. CN902

The purpose of the present research is to study the production of thermophilic alkaline protease by a local isolate, Streptomyces sp. CN902, under solid state fermentation (SSF). Optimum SSF parameters for enzyme production have been determined. Various locally available agro-industrial residues have been screened individually or as mixtures for alkaline protease production in SSF. The combination of wheat bran (WB) with chopped date stones (CDS) (5:5) proved to be an efficient mixture for protease production as it gave the highest enzyme activity (90.50 U g⁻¹) when compared to individual WB (74.50 U g⁻¹) or CDS (69.50 U g⁻¹) substrates. This mixed solid substrate was used for the production of protease from Streptomyces sp. CN902 under SSF. Maximal protease production (220.50 U g⁻¹) was obtained with an initial moisture content of 60%, an inoculum level of 1 × 10⁸ (spore g⁻¹ substrate) when incubated at 45°C for 5 days. Supplementation of WB and CDS mixtures with yeast extract as a nitrogen source further increased protease production to 245.50 U g⁻¹ under SSF. Our data demonstrated the usefulness of solid-state fermentation in the production of alkaline protease using WB and CDS mixtures as substrate. Moreover, this approach offered significant benefits due to abundant agro-industrial substrate availability and cheaper cost.     

Thermostable cellulases from <Emphasis Type="Italic">Streptomyces</Emphasis>sp.: scale-up production in a 50-l fermenter

Thermostable cellulase was produced by Streptomyces sp. T3-1 grown in a 50-l fermenter. Maximum cellulase activity was attained on the fourth day when agitation speeds and aeration rates were controlled at 300 rpm and 0.75 vvm, respectively. Maximum enzyme activities were: 148 IU CMCase ml^–1, 45 IU Avicelase ml^–1, and 137 IU -glucosidase ml^–1 with productivity of 326 IU l^–1 h^–1, which were 10--32% higher than the values obtained in shake-flask culturesRevisions requested 12 October 2004/1 November 2004; Received received 1 November 2004/14 December 2004     

Floral development and systematic position of <Emphasis Type="Italic">Arillastrum</Emphasis>, <Emphasis Type="Italic">Allosyncarpia</Emphasis>, <Emphasis Type="Italic">Stockwellia</Emphasis> and <Emphasis Type="Italic">Eucalyptopsis</Emphasis> (Myrtaceae)

We have investigated the floral ontogeny of Arillastrum, Allosyncarpia, Stockwellia and Eucalyptopsis (of the eucalypt group, Myrtaceae) using scanning electron microscopy and light microscopy. Several critical characters for establishing relationships between these genera and to the eucalypts have been determined. The absence of compound petaline primordia in Arillastrum, Allosyncarpia, Stockwellia and Eucalyptopsis excludes these taxa from the eucalypt clade. Post-anthesis circumscissile abscission of the hypanthium above the ovary in Stockwellia, Eucalyptopsis and Allosyncarpia is evidence that these three taxa form a monophyletic group; undifferentiated perianth parts and elongated fusiform buds are characters that unite Stockwellia and Eucalyptopsis as sister taxa. No floral characters clearly associate Arillastrum with either the eucalypt clade or the clade of Stockwellia, Eucalyptopsis and Allosyncarpia.We gratefully acknowledge Clyde Dunlop and Bob Harwood (Northern Territory Herbarium) for collecting specimens of Allosyncarpia, and Bruce Gray (Atherton) for collecting specimens of Stockwellia. The Australian National Herbarium (CANB) kindly lent herbarium specimens of Eucalyptopsis for examination. This research was supported by a University of Melbourne Research Development Grant to Andrew Drinnan.     

Isolation and characterization of the <Emphasis Type="Italic">Larix gmelinii </Emphasis><Emphasis Type="Italic">ANGUSTIFOLIA</Emphasis> (<Emphasis Type="Italic">LgAN</Emphasis>) gene

ANGUSTIFOLIA (AN), a plant homolog of C-terminal binding protein, controls the polar elongation of leaf cells and the trichome-branching pattern in Arabidopsis thaliana. In the present study, degenerate PCR was used to isolate an ortholog of AN, referred to as LgAN, from larch (Larix gmelinii). The LgAN cDNA is predicted to encode a protein of 646 amino acids that shows striking sequence similarity to AN proteins from other plants. The predicted amino acid sequence has a conserved NAD-dependent 2-hydroxy acid dehydrogenase (D2-HDH) motif and a plant AN-specific LxCxE/D motif at its N-terminus, as well as a plant-specific long C-terminal region. The LgAN gene is a single-copy gene that is expressed in all larch tissues. Expression of the LgAN cDNA rescued the leaf width and trichome-branching pattern defects in the angustifolia-1 (an-1) mutant of Arabidopsis, showing that the LgAN gene has effects complementary to those of AN. These results suggest that the LgAN gene has the same function as the AN gene.     

Production,characterization and (co-)immobilization of dextranase from <Emphasis Type="Italic">Penicillium aculeatum</Emphasis>

Fermentation kinetics of Penicillium aculeatum ATCC 10409 demonstrated that fungal growth and dextranase release are decoupled. Inoculation by conidia or mycelia resulted in identical kinetics. Two new isoenzymes of the dextranase were characterized regarding their kinetic constants, pI, MW, activation energy and stabilities. The larger enzyme was 3-fold more active (turnover number: 2,230 ± 97 s⁻¹). Pre-treatment of bentonite with H₂O₂ did not affect adsorption characteristics of dextranase. Enzyme to bentonite ratios above 0.5:1 (w/w) resulted in a high conservation of activity upon adsorption. Furthermore, dextranase could be used in co-immobilizates for the direct conversion of sucrose into isomalto-oligosaccharides (e.g. isomaltose). Yields of co-immobilizates were 2–20 times that of basic immobilizates, which consist of dextransucrase without dextranase.     

<Emphasis Type="Italic">Drosophila</Emphasis><Emphasis Type="Italic">P</Emphasis> transposons of the urochordata <Emphasis Type="Italic">Ciona intestinalis</Emphasis>

P transposons belong to the eukaryotic DNA transposons, which are transposed by a cut and paste mechanism using a P-element-coded transposase. They have been detected in Drosophila, and reside as single copies and stable homologous sequences in many vertebrate species. We present the P elements Pcin1, Pcin2 and Pcin3 from Ciona intestinalis, a species of the most primitive chordates, and compare them with those from Ciona savignyi. They showed typical DNA transposon structures, namely terminal inverted repeats and target site duplications. The coding region of Pcin1 consisted of 13 small exons that could be translated into a P-transposon-homologous protein. C. intestinalis and C. savignyi displayed nearly the same phenotype. However, their P elements were highly divergent and the assumed P transposase from C. intestinalis was more closely related to the transposase from Drosophila melanogaster than to the transposase of C. savignyi. The present study showed that P elements with typical features of transposable DNA elements may be found already at the base of the chordate lineage. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.