褐藻胶裂解酶基因的克隆表达及重组酶酶学性质

【目的】克隆交替假单胞菌(Pseudoalteromonas sp.)BYS-2的褐藻胶裂解酶基因,实现其在大肠杆菌细胞中异源表达,对分离纯化的重组酶进行酶学性质研究。【方法】以交替假单胞菌BYS-2菌株基因组DNA为模板,克隆得到褐藻胶裂解酶基因alg738,构建重组基因工程菌BL21(DE3)/p ET22b-alg738,诱导表达,表达产物通过Ni-NTA树脂纯化后进行酶学性质研究。【结果】重组酶的最适反应p H为8.0,在p H 6.0-9.0范围内37°C保温1 h仍能保持84%以上的相对酶活力,具有较好的p H稳定性;最适反应温度为45°C,热稳定性实验显示在37°C下保温60 min其残余酶活力仍达66.6%;在5 mmol/L浓度下,Na~+、Mg~(2+)、Mn~(2+)对该酶具有明显的促进作用,Ni~(2+)、Co~(2+)、Cu~(2+)、Hg~(2+)、Zn~(2+)、EDTA、β-巯基乙醇、SDS具有明显的抑制作用。动力学参数Km、Vmax分别为1.11 g/L和0.011 g/(L·min),底物特异性分析表明该重组酶为偏好聚甘露糖醛酸钠(Poly M)裂解作用的双功能酶。【结论】重组褐藻胶裂解酶具有良好的酶学特性,为褐藻胶裂解酶的开发应用打下基础。     

Preparation, purification and characterization of alginate oligosaccharides degraded by alginate lyase from Pseudomonas sp. HZJ 216

Alginate lyase which was purified from the fermentation solution of marine bacteria Pseudomonas sp. HJZ216 was applied to hydrolyze algae alginate. Six oligosaccharides, including di- and trisaccharides, were isolated and purified through anion exchange chromatography. The oligosaccharide structures were elucidated based on electrospray ionization-mass spectrometry (ESI-MS) and 2D NMR spectra analysis.     

Isolation and characterization of an alginate lyase from Klebsiella aerogenes

The bacterium Klebsiella aerogenes (type 25) produced an inducible alginate lyase, whose major activity was located intracellularly during all growth phases. The enzyme was purified from the soluble fraction of sonicated cells by ammonium sulfate precipitation, anion- and cation-exchange chromatography and gel filtration. The apparent molecular weight of purified alginate lyase of 28,000 determined by gel filtration and of 31,600 determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis indicated that the active enzyme was composed of a single polypeptide. The alginate lyase displayed a pH optimum around 7.0 and a temperature optimum around 37°C. The purified enzyme depolymerized alginate by a lyase reaction in an endo manner releasing products which reacted in the thiobarbituric acid assay and absorbed strongly in the ultraviolet region at 235 nm. The alginate lyase was specific for guluronic acidrich alginate preparations. Propylene glycol esters of alginate and O-acetylated bacterial alginates were poorly degraded by the lyase compared with unmodified polysaccharide. The guluronate-specific lyase activity was applied in an enzymatic method to detect mannuronan C-5 epimerase in three different mucoid (alginate-synthesizing) strains of Pseudomonas aeruginosa. This enzyme which converts polymannuronate to alginate could not be demonstrated either extracellularly or intracellularly in all strains suggesting the absence of a polymannuronate-modifying enzyme in P. aeruginosa.Abbreviations poly(ManA) (1–4)--D-mannuronan - poly(GulA) (1–4)--L-guluronan - TBA 2-thiobarbituric acid     

Purification and characterisation of a bifunctional alginate lyase from novel Isoptericola halotolerans CGMCC 5336

A novel halophilic alginate-degrading microorganism was isolated from rotten seaweed and identified as Isoptericola halotolerans CGMCC5336. The lyase from the strain was purified to homogeneity by combining of ammonium sulfate fractionation and anion-exchange chromatography with a specific activity of 8409.19 U/ml and a recovery of 25.07%. This enzyme was a monomer with a molecular mass of approximately 28 kDa. The optimal temperature and pH were 50 °C and pH 7.0, respectively. The lyase maintained stability at neutral pH (7.0–8.0) and temperatures below 50 °C. Metal ions including Na⁺, Mg²⁺, Mn²⁺, and Ca²⁺ notably increased the activity of the enzyme. With sodium alginate as the substrate, the K_m and V_max were 0.26 mg/ml and 1.31 mg/ml min, respectively. The alginate lyase had substrate specificity for polyguluronate and polymannuronate units in alginate molecules, indicating its bifunctionality. These excellent characteristics demonstrated the potential applications in alginate oligosaccharides production with low polymerisation degrees.     

Structural characterization of Linum usitatissimum hydroxynitrile lyase: A new cyanohydrin decomposition mechanism involving a cyano-zinc complex

Hydroxynitrile lyase from Linum usitatissimum (LuHNL) is an enzyme involved in the catabolism of cyanogenic glycosides to release hydrogen cyanide upon tissue damage. This enzyme strictly conserves the substrate- and NAD(H)-binding domains of Zn²⁺-containing alcohol dehydrogenase (ADH); however, there is no evidence suggesting that LuHNL possesses ADH activity. Herein, we determined the ligand-free 3D structure of LuHNL and its complex with acetone cyanohydrin and (R)-2-butanone cyanohydrin using X-ray crystallography. These structures reveal that an A-form NAD⁺ is tightly but not covalently bound to each subunit of LuHNL. The restricted movement of the NAD+ molecule is due to the “sandwich structure” on the adenine moiety of NAD⁺. Moreover, the structures and mutagenesis analysis reveal a novel reaction mechanism for cyanohydrin decomposition involving the cyano-zinc complex and hydrogen-bonded interaction of the hydroxyl group of cyanohydrin with Glu323/Thr65 and H₂O/Lys162 of LuHNL. The deprotonated Lys162 and protonated Glu323 residues are presumably stabilized by a partially desolvated microenvironment. In summary, the substrate binding geometry of LuHNL provides insights into the differences in activities of LuHNL and ADH, and identifying this novel reaction mechanism is an important contribution to the study of hydroxynitrile lyases.     

Purification and characterization of a Na/K dependent alginate lyase from turban shell gut Vibrio sp. YKW-34

An alginate lyase with high specific enzyme activity was purified from Vibrio sp. YKW-34, which was newly isolated from turban shell gut. The alginate lyase was purified by in order of ion exchange, hydrophobic and gel filtration chromatographies to homogeneity with a recovery of 7% and a fold of 25. This alginate lyase was composed of a single polypeptide chain with molecular mass of 60 kDa and isoelectric point of 5.5–5.7. The optimal pH and temperature for alginate lyase activity were pH 7.0 and 40 °C, respectively. The alginate lyase was stable over pH 7.0–10.0 and at temperature below 50 °C. The alginate lyase had substrate specificity for both poly-guluronate and poly-mannuronate units. The k_cat/K_m value for alginate (heterotype) was 1.7 × 10⁶ s⁻¹ M⁻¹. The enzyme activity was completely lost by dialysis and restored by addition of Na⁺ or K⁺. The optimal activity exhibited in 0.1 M of Na⁺ or K⁺. This enzyme was resistant to denaturing reagents (SDS and urea), reducing reagents (β-mercaptoethanol and DTT) and chelating reagents (EGTA and EDTA).     

Purification and characterization of the recombinant alginate lyase from Pseudomonas sp. leaked by Escherichia coli upon addition of glycine

Abstract The plasmid pAL205 encodes an alginate lyase gene of Pseudomonas sp. OS-ALG-9, fused in frame to the β-galactosidase α-peptide gene. The alginate lyase (Aly) expressed in Escherichia coli (pAL205) was significantly secreted into the medium by the addition of glycine. The extracellular enzyme isolated from the culture of E. coli JM109 (pAL205) was purified over 15 000-fold by successive chromatography and subjected to amino acid sequence analysis. The sequence determined was identical to that of the intracellular protein. Since the activity and molecular size of the extracellular Aly is identical to the intracellular protein and to the Aly isolated from Pseudomonas , the glycine does not affect or modify the Aly during its leakage into the medium.     

Structural and biochemical characterization of the therapeutic Anabaena variabilis phenylalanine ammonia lyase

We have recently observed promising success in a mouse model for treating the metabolic disorder phenylketonuria with phenylalanine ammonia lyase (PAL) from Rhodosporidium toruloides and Anabaena variabilis. Both molecules, however, required further optimization in order to overcome problems with protease susceptibility, thermal stability, and aggregation. Previously, we optimized PAL from R. toruloides, and in this case we reduced aggregation of the A. variabilis PAL by mutating two surface cysteine residues (C503 and C565) to serines. Additionally, we report the structural and biochemical characterization of the A. variabilis PAL C503S/C565S double mutant and carefully compare this molecule with the R. toruloides engineered PAL molecule. Unlike previously published PAL structures, significant electron density is observed for the two active-site loops in the A. variabilis C503S/C565S double mutant, yielding a complete view of the active site. Docking studies and N-hydroxysuccinimide-biotin binding studies support a proposed mechanism in which the amino group of the phenylalanine substrate is attacked directly by the 4-methylidene-imidazole-5-one prosthetic group. We propose a helix-to-loop conformational switch in the helices flanking the inner active-site loop that regulates accessibility of the active site. Differences in loop stability among PAL homologs may explain the observed variation in enzyme efficiency, despite the highly conserved structure of the active site. A. variabilis C503S/C565S PAL is shown to be both more thermally stable and more resistant to proteolytic cleavage than R. toruloides PAL. Additional increases in thermal stability and protease resistance upon ligand binding may be due to enhanced interactions among the residues of the active site, possibly locking the active-site structure in place and stabilizing the tetramer. Examination of the A. variabilis C503S/C565S PAL structure, combined with analysis of its physical properties, provides a structural basis for further engineering of residues that could result in a better therapeutic molecule.     

Purification and characterization of a novel alginate lyase from the marine bacterium Cobetia sp. NAP1 isolated from brown algae

The application of marine resources, instead of fossil fuels, for biomass production is important for building a sustainable society. Seaweed is valuable as a source of marine biomass for producing biofuels such as ethanol, and can be used in various fields. Alginate is an anionic polysaccharide that forms the main component of brown algae. Various alginate lyases (e.g. exo- and endo-types and oligoalginate lyase) are generally used to degrade alginate. We herein describe a novel alginate lyase, AlgC-PL7, which belongs to the polysaccharide lyase 7 family. AlgC-PL7 was isolated from the halophilic Gram-negative bacterium Cobetia sp. NAP1 collected from the brown algae Padina arborescens Holmes. The optimal temperature and pH for AlgC-PL7 activity were 45 °C and 8, respectively. Additionally, AlgC-PL7 was thermostable and salt-tolerant, exhibited broad substrate specificity, and degraded alginate into monosaccharides. Therefore, AlgC-PL7 is a promising enzyme for the production of biofuels.     

cDNA cloning of an alginate lyase from a marine gastropod Aplysia kurodai and assessment of catalytically important residues of this enzyme

Herbivorous marine gastropods such as abalone and sea hare ingest brown algae as a major diet and degrade the dietary alginate with alginate lyase (EC 4.2.2.3) in their digestive fluid. To date alginate lyases from Haliotidae species such as abalone have been well characterized and the primary structure analyses have classified abalone enzymes into polysaccharide-lyase-family 14 (PL-14). However, other gastropod enzymes have not been so well investigated and only partial amino-acid sequences are currently available. To improve the knowledge for primary structure and catalytic residues of gastropod alginate lyases, we cloned the cDNA encoding an alginate lyase, AkAly30, from an Aplysiidae species Aplysia kurodai and assessed its catalytically important residues by site-directed mutagenesis. Alginate lyase cDNA fragments were amplified by PCR followed by 5′- and 3′-RACE from A. kurodai hepatopancreas cDNA. The finally cloned cDNA comprised 1313 bp which encoded an amino-acid sequence of 295 residues of AkAly30. The deduced sequence comprised an initiation methionine, a putative signal peptide for secretion (18 residues), a propeptide-like region (9 residues), and a mature AkAly30 domain (267 residues) which showed ∼40% amino-acid identity with abalone alginate lyases. An Escherichia coli BL21(DE3)-pCold I expression system for recombinant AkAly30 (recAkAly30) was constructed and site-directed mutagenesis was performed to assess catalytically important amino-acid residues which had been suggested in abalone and Chlorella virus PL-14 enzymes. Replacements of K99, S126, R128, Y140 and Y142 of recAkAly30 by Ala and/or Phe greatly decreased its activity as in the case of abalone and/or Chlorella virus enzymes. Whereas, H213 that was essential for Chlorella virus enzyme to exhibit the activity at pH 10.0 was originally replaced by N120 in AkAly30. The reverse replacement of N120 by His in recAkAly30 increased the activity at pH 10.0 from 8 U/mg to 93 U/mg; however, the activity level at pH 7.0, i.e., 774.8 U/mg, was still much higher than that at pH 10.0. This indicates that N120 is not directly related to the pH dependence of AkAly30 unlike H213 of vAL-1.     

Structural and biochemical characterization of a novel Mn2+-dependent phosphodiesterase encoded by the yfcE gene

Escherichia coli YfcE belongs to a conserved protein family within the calcineurin-like phosphoesterase superfamily (Pfam00149) that is widely distributed in bacteria and archaea. Superfamily members are metallophosphatases that include monoesterases and diesterases involved in a variety of cellular functions. YfcE exhibited catalytic activity against bis-p-nitrophenyl phosphate, a general substrate for phosphodiesterases, and had an absolute requirement for Mn2+. However, no activity was observed with phosphodiesters and over 50 naturally occurring phosphomonoesters. The crystal structure of the YfcE phosphodiesterase has been determined to 2.25 A resolution. YfcE has a beta-sandwich architecture similar to metallophosphatases of common ancestral origin. Unlike its more complex homologs that have added structural elements for regulation and substrate recognition, the relatively small 184-amino-acid protein has retained its ancestral simplicity. The tetrameric protein carries two zinc ions per active site from the E. coli extract that reflect the conserved di-Mn2+ active site geometry. A cocrystallized sulfate inhibitor mimics the binding of phosphate moeities in known ligand/phosphatase complexes. Thus, YfcE has a similar active site and biochemical mechanism as well-characterized superfamily members, while the YfcE phosphodiester-containing substrate is unique.     

Structural and biochemical characterization of the nucleoside hydrolase from C. elegans reveals the role of two active site cysteine residues in catalysis

Nucleoside hydrolases (NHs) catalyze the hydrolysis of the N‐glycoside bond in ribonucleosides and are found in all three domains of life. Although in parasitic protozoa a role in purine salvage has been well established, their precise function in bacteria and higher eukaryotes is still largely unknown. NHs have been classified into three homology groups based on the conservation of active site residues. While many structures are available of representatives of group I and II, structural information for group III NHs is lacking. Here, we report the first crystal structure of a purine‐specific nucleoside hydrolase belonging to homology group III from the nematode Caenorhabditis elegans (CeNH) to 1.65Å resolution. In contrast to dimeric purine‐specific NHs from group II, CeNH is a homotetramer. A cysteine residue that characterizes group III NHs (Cys253) structurally aligns with the catalytic histidine and tryptophan residues of group I and group II enzymes, respectively. Moreover, a second cysteine (Cys42) points into the active site of CeNH. Substrate docking shows that both cysteine residues are appropriately positioned to interact with the purine ring. Site‐directed mutagenesis and kinetic analysis proposes a catalytic role for both cysteines residues, with Cys253 playing the most prominent role in leaving group activation.     

Structural studies on bacterial system used in the recognition and uptake of the macromolecule alginate

Alginate is an acidic heteropolysaccharide produced by brown seaweed and certain kinds of bacteria. The cells of Sphingomonas sp. strain A1, a gram-negative bacterium, have several alginate-degrading enzymes in their cytoplasm and efficiently utilize this polymer for their growth. Sphingomonas sp. strain A1 cells can directly incorporate alginate into their cytoplasm through a transport system consisting of a “pit” on their cell surface, substrate-binding proteins in their periplasm, and an ATP-binding cassette transporter in their inner membrane. This review deals with the structural and functional aspects of bacterial systems necessary for the recognition and uptake of alginate.     

Structural Analysis of Glucuronoxylan-specific Xyn30D and Its Attached CBM35 Domain Gives Insights into the Role of Modularity in Specificity

Glucuronoxylanase Xyn30D is a modular enzyme containing a family 30 glycoside hydrolase catalytic domain and an attached carbohydrate binding module of the CBM35 family. We present here the three-dimensional structure of the full-length Xyn30D at 2.4 Å resolution. The catalytic domain folds into an (α/β)₈ barrel with an associated β-structure, whereas the attached CBM35 displays a jellyroll β-sandwich including two calcium ions. Although both domains fold in an independent manner, the linker region makes polar interactions with the catalytic domain, allowing a moderate flexibility. The ancillary Xyn30D-CBM35 domain has been expressed and crystallized, and its binding abilities have been investigated by soaking experiments. Only glucuronic acid-containing ligands produced complexes, and their structures have been solved. A calcium-dependent glucuronic acid binding site shows distinctive structural features as compared with other uronic acid-specific CBM35s, because the presence of two aromatic residues delineates a wider pocket. The nonconserved Glu¹²⁹ makes a bidentate link to calcium and defines region E, previously identified as specificity hot spot. The molecular surface of Xyn30D-CBM35 shows a unique stretch of negative charge distribution extending from its binding pocket that might indicate some oriented interaction with its target substrate. The binding ability of Xyn30D-CBM35 to different xylans was analyzed by affinity gel electrophoresis. Some binding was observed with rye glucuronoarabinoxylan in presence of calcium chelating EDTA, which would indicate that Xyn30D-CBM35 might establish interaction to other components of xylan, such as arabinose decorations of glucuronoarabinoxylan. A role in depolymerization of highly substituted chemically complex xylans is proposed.     

Periodate oxidation of sodium alginate in water and in ethanol-water mixture: a comparative study

Periodate oxidation of sodium alginate in aqueous solution as well as a dispersion in 1:1 ethanol-water was examined. The oxidation proceeded smoothly in both media, and the kinetics of oxidation was surprisingly similar. Polymer cleavage was observed in both media, but it was extensive in ethanol-water. The weight-average molar mass (Mw) of the oxidized product obtained from aqueous solution showed a gradual decrease with increase in the periodate concentration, whereas, except for very high periodate equivalent, the change in Mw was not reflected with increase in concentration of periodate in ethanol-water. The oxidized alginate obtained from the ethanol-water mixture was found to be more efficient in crosslinking proteins such as gelatin, leading to hydrogels. Oxidation of a dispersion has the advantage of generating large quantities of the oxidized alginate in higher yield with one reaction using less solvent.     

Structural and functional analysis of gum arabic l-rhamnose-α-1,4-d-glucuronate lyase establishes a novel polysaccharide lyase family

Gum arabic (GA) is widely used as an emulsion stabilizer and coating in several industrial applications, such as foods and pharmaceuticals. GA contains a complex carbohydrate moiety, and the nonreducing ends of the side chains are often capped with l-rhamnose; thus, enzymes that can remove these caps are promising tools for the structural analysis of the carbohydrates comprising GA. In this study, GA-specific l-rhamnose-α-1,4-d-glucuronate lyase from the fungus Fusarium oxysporum 12S (FoRham1) was cloned and characterized. FoRham1 showed the highest amino acid sequence similarity with enzymes belonging to the glycoside hydrolase family 145; however, the catalytic residue on the posterior pocket of the β-propeller fold protein was not conserved. The catalytic residues of FoRham1 were instead conserved with ulvan lyases belonging to polysaccharide lyase family 24. Kinetic analysis showed that FoRham1 has the highest catalytic efficiency for the substrate α-l-rhamnose-(1→4)-d-glucuronic acid. The crystal structures of ligand-free and α-l-rhamnose-(1→4)-d-glucuronic acid –bound FoRham1 were determined, and the active site was identified on the anterior side of the β-propeller. The three-dimensional structure of the active site and mutagenesis analysis revealed the detailed catalytic mechanism of FoRham1. Our findings offer a new enzymatic tool for the further analysis of the GA carbohydrate structure and for elucidating its physiological functions in plants. Based on these results, we renamed glycoside hydrolase family 145 as a new polysaccharide lyase family 42, in which FoRham1 is included.     

Overexpression of alginate lyase of <Emphasis Type="Italic">Pseudoalteromonas elyakovii</Emphasis> in <Emphasis Type="Italic">Escherichia coli</Emphasis>, purification,and characterization of the recombinant alginate lyase

The alyPEEC gene encoding alginate lyase from marine bacterium Pseudoalteromonas elyakovii IAM 14594 was subcloned into pBAD24 with arabinose promoter and sequenced, and overexpressed in TOP10 strain of E. coli after arabinose induction. Expression levels of alyPEEC gene in E. coli cells were over 39.6-fold higher than those in P. elyakovii IAM 14594 cells. The molecular mass of purified alginate lyase from the engineered E. coli cells was estimated to be 32.0 kDa. Optimum pH and temperature of the alginate lyase activity were 7.0 and 30 °C, respectively. The enzyme was unstable on heating and in acidic and alkaline solution. The enzyme activity was stimulated by the MgCl₂, NaCl, KCl, CaCl₂, BaCl₂ and MnCl₂, but was inhibited by the addition of 1.0 mM of EGTA, EDTA, SDS, ZnSO₄, AgNO₃, and CoCl₂. All the alginate, polyM and polyG could be converted into oligosaccharides with more than tetrasaccharides by the purified recombinant alginate lyase, suggesting that the recombinant alginate lyase produced by the engineered E. coli has highly potential application in seaweed genetics, food and pharmaceutical industries.     

Heterologous expression of a Penicillium purpurogenum pectin lyase in Pichia pastoris and its characterization

Lignocellulose is the major component of plant cell walls and it represents a great source of renewable organic matter. One of lignocellulose constituents is pectin. Pectin is composed of two basic structures: a ‘smooth’ region and a ‘hairy’ region. The ‘smooth’ region (homogalacturonan) is a linear polymer of galacturonic acid residues with α-(1→4) linkages, substituted by methyl and acetyl residues. The ‘hairy’ region is more complex, containing xylogalacturonan and rhamnogalacturonans I and II. Among the enzymes which degrade pectin (pectinases) is pectin lyase (E.C. 4.2.2.10). This enzyme acts on highly esterified homogalacturonan, catalysing the cleavage of α-(1→4) glycosidic bonds between methoxylated residues of galacturonic acid by means of β-elimination, with the formation of 4,5-unsaturated products. In this work, the gene and cDNA of a pectin lyase from Penicillium purpurogenum have been sequenced, and the cDNA has been expressed in Pichia pastoris. The gene is 1334 pb long, has three introns and codes for a protein of 376 amino acid residues. The recombinant enzyme was purified to homogeneity and characterized. Pectin lyase has a molecular mass of 45 kDa as determined by SDS-PAGE. It is active on highly esterified pectin, and decreases 40 % the viscosity of pectin with a degree of esterification ≥85 %. The enzyme showed no activity on polygalacturonic acid and pectin from citrus fruit 8 % esterified. The optimum pH and temperature for the recombinant enzyme are 6.0 and 50 °C, respectively, and it is stable up to 50 °C when exposed for 3 h. A purified pectin lyase may be useful in biotechnological applications such as the food industry where the liberation of toxic methanol in pectin degradation should be avoided.     

Structural and molecular basis for the substrate positioning mechanism of a new PL7 subfamily alginate lyase from the arctic

Alginate lyases play important roles in alginate degradation in the ocean. Although a large number of alginate lyases have been characterized, little is yet known about those in extremely cold polar environments, which may have unique mechanisms for environmental adaptation and for alginate degradation. Here, we report the characterization of a novel PL7 alginate lyase AlyC3 from Psychromonas sp. C-3 isolated from the Arctic brown alga Laminaria, including its phylogenetic classification, catalytic properties, and structure. We propose the establishment of a new PM-specific subfamily of PL7 (subfamily 6) represented by AlyC3 based on phylogenetic analysis and enzymatic properties. Structural and biochemical analyses showed that AlyC3 is a dimer, representing the first dimeric endo-alginate lyase structure. AlyC3 is activated by NaCl and adopts a novel salt-activated mechanism; that is, salinity adjusts the enzymatic activity by affecting its aggregation states. We further solved the structure of an inactive mutant H127A/Y244A in complex with a dimannuronate molecule and proposed the catalytic process of AlyC3 based on structural and biochemical analyses. We show that Arg⁸² and Tyr¹⁹⁰ at the two ends of the catalytic canyon help the positioning of the repeated units of the substrate and that His¹²⁷, Tyr²⁴⁴, Arg⁷⁸, and Gln¹²⁵ mediate the catalytic reaction. Our study uncovers, for the first time, the amino acid residues for alginate positioning in an alginate lyase and demonstrates that such residues involved in alginate positioning are conserved in other alginate lyases. This study provides a better understanding of the mechanisms of alginate degradation by alginate lyases.