Molecular genetics of bacteriophage P22 scaffolding protein's functional domains

The assembly intermediates of the Salmonella bacteriophage P22 are well defined but the molecular interactions between the subunits that participate in its assembly are not. The first stable intermediate in the assembly of the P22 virion is the procapsid, a preformed protein shell into which the viral genome is packaged. The procapsid consists of an icosahedrally symmetric shell of 415 molecules of coat protein, a dodecameric ring of portal protein at one of the icosahedral vertices through which the DNA enters, and approximately 250 molecules of scaffolding protein in the interior. Scaffolding protein is required for assembly of the procapsid but is not present in the mature virion. In order to define regions of scaffolding protein that contribute to the different aspects of its function, truncation mutants of the scaffolding protein were expressed during infection with scaffolding deficient phage P22, and the products of assembly were analyzed. Scaffolding protein amino acids 1-20 are not essential, since a mutant missing them is able to fully complement scaffolding deficient phage. Mutants lacking 57 N-terminal amino acids support the assembly of DNA containing virion-like particles; however, these particles have at least three differences from wild-type virions: (i) a less than normal complement of the gene 16 protein, which is required for DNA injection from the virion, (ii) a fraction of the truncated scaffolding protein was retained within the virions, and (iii) the encapsidated DNA molecule is shorter than the wild-type genome. Procapsids assembled in the presence of a scaffolding protein mutant consisting of only the C-terminal 75 amino acids contained the portal protein, but procapsids assembled with the C-terminal 66 did not, suggesting portal recruitment function for the region about 75 amino acids from the C terminus. Finally, scaffolding protein amino acids 280 through 294 constitute its minimal coat protein binding site.     

Domain study of bacteriophage p22 coat protein and characterization of the capsid lattice transformation by hydrogen/deuterium exchange

Viral capsids are dynamic structures which undergo a series of structural transformations to form infectious viruses. The dsDNA bacteriophage P22 is used as a model system to study the assembly and maturation of icosahedral dsDNA viruses. The P22 procapsid, which is the viral capsid precursor, is assembled from coat protein with the aid of scaffolding protein. Upon DNA packaging, the capsid lattice expands and becomes a stable virion. Limited proteolysis and biochemical experiments indicated that the coat protein consists of two domains connected by a flexible loop. To investigate the properties and roles of the sub-domains, we have cloned them and initiated structure and function studies. The N-terminal domain, which is made up of 190 amino acid residues, is largely unstructured in solution, while the C-terminal domain, which consists of 239 amino acid residues, forms a stable non-covalent dimer. The N-terminal domain adopts additional structure in the context of the C-terminal domain which might form a platform on which the N-terminal domain can fold. The local dynamics of the coat protein in both procapsids and mature capsids was monitored by hydrogen/deuterium exchange combined with mass spectrometry. The exchange rate for C-terminal domain peptides was similar in both forms. However, the N-terminal domain was more flexible in the empty procapsid shells than in the mature capsids. The flexibility of the N-terminal domain observed in the solution persisted into the procapsid form, but was lost upon maturation. The loop region connecting the two domains exchanged rapidly in the empty procapsid shells, but more slowly in the mature capsids. The global stabilization of the N-terminal domain and the flexibility encoded in the loop region may be a key component of the maturation process.     

Time-resolved molecular dynamics of bacteriophage HK97 capsid maturation interpreted by electron cryo-microscopy and X-ray crystallography

The bacteriophage HK97 capsid is a molecular machine that exhibits large-scale conformational rearrangements of its 420 identical protein subunits during capsid maturation. Immature empty capsids, termed Prohead II, assemble in vivo in an Escherichia coli expression system. Maturation of these particles may be induced in vitro, converting them into Head II capsids that are indistinguishable in conformation from the capsid of an infectious phage particle. One method of in vitro maturation requires acidification to drive the reaction through two expansion intermediates (EI-I, EI-II) to its penultimate particle state (EI-III), which has 86% more internal volume than Prohead II. Neutralization of EI-III produces the fully mature capsid, Head II. The three expansion intermediates and the acid expansion pathway were characterized by cryo-EM analysis and 3D reconstruction. We now report that, although large-scale structural changes are involved, the electron density maps for these intermediate states are readily interpreted in terms of quasi-atomic models based on subunit structures determined by prior crystallographic analysis of Head II. Progression through the expansion intermediate states primarily represents rigid-body rotations and translations of the subunits, accompanied by refolding of two small regions, the N-terminal arm and a beta-hairpin called the E-loop. Movies made with these pseudo-atomic coordinates and the Head II X-ray coordinates illuminate various aspects of the maturation pathway in the course of which the pattern of inter-subunit interactions is sequentially transformed while the integrity of the capsid is maintained.     

Inhibition and eradication of Salmonella Typhimurium biofilm using P22 bacteriophage,EDTA and nisin

Abstract

P22 phage >10⁵ PFU ml^?1 could be used to inhibit Salmonella Typhimurium biofilm formation by 55–80%. Concentrations of EDTA >1.25?mM and concentrations of nisin >1,200?µg ml^?1 were also highly effective in reducing S. Typhimurium biofilm formation (≥96% and ≥95% reductions were observed, respectively). A synergistic effect was observed when EDTA and nisin were combined whereas P22 phage in combination with nisin had no synergistic impact on biofilm formation. Triple combination of P22 phage, EDTA and nisin could be also used to inhibit biofilm formation (≥93.2%) at a low phage titer (10² PFU ml^?1), and low EDTA (1.25?mM) and nisin (9.375?µg ml^?1) concentrations. A reduction of 70% in the mature biofilm was possible when 10⁷ PFU ml^?1 of P22 phage, 20?mM of EDTA and 150?μg ml^?1 of nisin were used in combination. This study revealed that it could be possible to reduce biofilm formation by S. Typhimurium by the use of P22 phage, EDTA and nisin, either alone or in combination. Although, removal of the mature biofilm was more difficult, the triple combination could be successfully used for mature biofilm of S. Typhimurium.     

Cavity defects in the procapsid of bacteriophage P22 and the mechanism of capsid maturation

Bacteriophage P22 belongs to a family of double-stranded DNA viruses that share common morphogenetic features like DNA packaging into a procapsid precursor and maturation. Maturation involves cooperative expansion of the procapsid shell with concomitant lattice stabilization. The expansion is thought to be mediated by movement of two coat protein domains around a hinge. The metastable conformation of subunit within the procapsid lattice is considered to constitute a late folding intermediate. In order to understand the mechanism of expansion it is necessary to characterize the interactions stabilizing procapsid and mature capsid lattices, respectively. We employ pressure dissociation to compare subunit packing within the procapsid and expanded lattice. Procapsid shells contain larger cavities than the expanded shells, presumably due to polypeptide packing defects. These defects contribute to the metastable nature of the procapsid lattice and are cured during expansion. Improved packing contributes to the increased stability of the expanded shell. Comparison of two temperature-sensitive folding (tsf) mutants of coat protein (T294I and W48Q) with wild-type coat revealed that both mutations markedly destabilized the procapsid shell and yet had little effect on relative stability of the monomeric subunit. Thus, the regions affected by these packing defects constitute subunit interfaces of the procapsid shell. The larger activation volume of pressure dissociation observed for both T294I and W48Q indicates that the decreased stability of these particles is due to increase of cavity defects. These defects in the procapsid lattice are cured upon expansion suggesting that the intersubunit contacts affected by tsf mutations are absent or rearranged in the mature shell. The energetics of the in vitro expansion reaction also suggests that entropic stabilization contributes to the large free energy barrier for expansion.     

Structural basis of bacteriophage lambda capsid maturation

1. Download : Download high-res image (409KB)
2. Download : Download full-size image

     

Three-dimensional structure of the bacteriophage P22 tail machine

The tail of the bacteriophage P22 is composed of multiple protein components and integrates various biological functions that are crucial to the assembly and infection of the phage. The three-dimensional structure of the P22 tail machine determined by electron cryo-microscopy and image reconstruction reveals how the five types of polypeptides present as 51 subunits are organized into this molecular machine through twelve-, six- and three-fold symmetry, and provides insights into molecular events during host cell attachment and phage DNA translocation.     

Structure and assembly of the capsid of bacteriophage P22.

Identification of the genes and proteins involved in phage P22 formation has permitted a detailed analysis of particle assembly, revealing some unexpected aspects. The polymerization of the major coat protein (gene 5 product) into an organized capsid is directed by a scaffolding protein (gene 8 product) which is absent from mature phage. The resulting capsid structure (prohead) is the precursor for DNA encapsidation. All of the scaffolding protein exits from the prohead in association with DNA packaging. These molecules then recycle, directing further rounds of prohead assembly. The structure of the prohead has been studied by electron microscopy of thin sections of phage infected cells, and by low angle X-ray scattering of concentrated particles. The results show that the prohead is a double shell structure, or a ball within a shell. The inner ball or shell is composed of the scaffolding protein while the outer shell is composed of coat protein. The conversion from prohead to mature capsid is associated with an expansion of the coat protein shell. It is possible that the scaffolding protein molecules exit through the capsid lattice. When DNA encapsidation within infected cells is blocked by mutation, scaffolding protein is trapped in proheads and cannot recycle. Under these conditions, the rate of synthesis of gp8 increases, so that normal proheads continue to form. These results suggest that free scaffolding protein negatively regulates its own further synthesis, providing a coupling between protein synthesis and protein assembly.     

Evidence that a local refolding event triggers maturation of HK97 bacteriophage capsid

Bacteriophage capsids are a striking example of a robust yet dynamic genome delivery vehicle. Like most phages, HK97 undergoes a conformational maturation that converts a metastable Prohead into the mature Head state. In the case of HK97, maturation involves a significant expansion of the capsid and concomitant cross-linking of capsid subunits. The final state, termed Head-II, is a 600 angstroms diameter icosahedral structure with catenated subunit rings. Cryo-EM, small angle X-ray scattering (SAXS), and biochemical assays were used previously to characterize the initial (Prohead-II) and final states (Head-II) as well as four maturation intermediates. Here we extend the characterization of the acid-induced expansion of HK97 in vitro by monitoring changes in intrinsic fluorescence, circular dichroism (CD), and SAXS. We find that the greatest changes in all observables occur at an early stage of maturation. Upon acidification, fluorescence emissions from HK97 exhibit a blueshift and decrease in intensity. These spectral changes reveal two kinetic phases of the expansion reaction. The early phase exhibits sensitivity to pH, increasing in rate nearly 200-fold when acidification pH is lowered from 4.5 to 3.9. The second, slower phase reported by fluorescence is relatively insensitive to pH. Time-resolved SAXS experiments report an increase in overall particle dimension that parallels the fluorescence changes for the early phase. Native agarose gel assays corroborated this finding. By contrast, probes of CD at far-UV indicate that secondary structural changes precede the early expansion phase reported by SAXS and fluorescence. Based on the crystallographic structure of Head-II and the pseudo-atomic model of Prohead-II, we interpret these changes as reflecting the conversion of subunit N-terminal arms (N-arm) from unstructured polypeptide to the mixture of beta-strand and beta-turn observed in the Head-II crystal structure. Refolding of the N-arm may thus represent the conformational trigger that initiates the irreversible expansion of the phage capsid.     

Mechanism of phage P22 tailspike protein folding mutations.

Temperature-sensitive folding (tsf) and global-tsf-suppressor (su) point mutations affect the folding yields of the trimeric, thermostable phage P22 tailspike endorhamnosidase at elevated temperature, both in vivo and in vitro, but they have little effect on function and stability of the native folded protein. To delineate the mechanism by which these mutations modify the partitioning between productive folding and off-pathway aggregation, the kinetics of refolding after dilution from acid-urea solutions and the thermal stability of folding intermediates were analyzed. The study included five tsf mutations of varying severity, the two known su mutations, and four tsf/su double mutants. At low temperature (10 degrees C), subunit-folding rates, measured as an increase in fluorescence, were similar for wild-type and mutants. At 25 degrees C, however, tsf mutations reduced the rate of subunit folding. The su mutations increased this rate, when present in the tsf-mutant background, but had no effect in the wild-type background. Conversely, tsf mutations accelerated, and su mutations retarded the irreversible off-pathway reaction, as revealed by temperature down-shifts after varied times during refolding at high temperature (40 degrees C). The kinetic results are consistent with tsf mutations destabilizing and su mutations stabilizing an essential subunit folding intermediate. In accordance with this interpretation, tsf mutations decreased, and su mutations increased the temperature resistance of folding intermediates, as disclosed by temperature up-shifts during refolding at 25 degrees C. The stabilizing and destabilizing effects were most pronounced early during refolding. However, they were not limited to subunit-folding intermediates and were also observable during thermal unfolding of the native protein.     

Site-specific recombination events mediated by the DNA invertase Cin of bacteriophage P1 during transformation

Abstract Bacteriophage P1 encodes the site-specific recombinase Cin which promotes inversion of the C segment, thus controlling the P1 host range. Cin can also mediate inefficient inversion between the normal crossover site cixL and a quasi-crossover site cixQ 1 in inverted orientation. Inversion between cixL and cixQ 1 occurs more frequently in a short period of time after transformation with a plasmid carrying the cin gene, cixL and cixQ 1 than in an established transformant of the plasmid. This is also the case for Cin-mediated deletion on a plasmid containing the cin gene and directly repeated cix sites.     

Conformational states of the bacteriophage P22 capsid subunit in relation to self-assembly

The formation of closed icosahedral capsids from a single species of coat protein subunit requires that the subunits assume different conformations at different lattice positions. In the double-stranded DNA bacteriophage P22, formation of correctly dimensioned capsids is mediated by interaction between coat protein subunits and scaffolding protein. Raman spectroscopy has been employed to compare the conformations of coat protein subunits which have been polymerized to form capsids in the presence and absence of the of scaffolding protein display a Raman spectrum characterized by a broad amide I band centered at 1665 cm-1 with a discernible shoulder near 1653 cm-1, and a broad amide III profile centered at 1238 cm-1 but asymmetrically skewed to higher frequency. These spectral features indicate that the protein conformation in procapsid shells is rich in beta-sheet secondary structure but contains also a significant distribution of alpha-helix. When biologically active, purified subunits assemble in the absence of scaffolding protein, they form polydisperse multimers lacking the proper dimensions of procapsid closed shells. We designate these multimers as "associated subunits" (AS). The Raman spectrum of associated subunits indicates a narrower distribution of secondary structure. The associated subunits are characterized by a sharper and more intense Raman amide I band at 1666 cm-1, with no prominent amide I shoulder of lower frequency. An analogous narrowing of the Raman amide III profile is also observed for AS particles, with an accompanying shift of the amide III band center to 1235 cm-1.(ABSTRACT TRUNCATED AT 250 WORDS)     

Bacteriophage p22 portal vertex formation in vivo

Bacteriophage with double-stranded, linear DNA genomes package DNA into pre-assembled icosahedral procapsids through a unique vertex. The packaging vertex contains an oligomeric ring of a portal protein that serves as a recognition site for the packaging enzymes, a conduit for DNA translocation, and the site of tail attachment. Previous studies have suggested that the portal protein of bacteriophage P22 is not essential for shell assembly; however, when assembled in the absence of functional portal protein, the assembled heads are not active in vitro packaging assays. In terms of head assembly, this raises an interesting question: how are portal vertices defined during morphogenesis if their incorporation is not a requirement for head assembly? To address this, the P22 portal gene was cloned into an inducible expression vector and transformed into the P22 host Salmonella typhimurium to allow control of the dosage of portal protein during infections. Using pulse-chase radiolabeling, it was determined that the portal protein is recruited into virion during head assembly. Surprisingly, over-expression of the portal protein during wild-type P22 infection caused a dramatic reduction in the yield of infectious virus. The cause of this reduction was traced to two potentially related phenomena. First, excess portal protein caused aberrant head assembly resulting in the formation of T=7 procapsid-like particles (PLPs) with twice the normal amount of portal protein. Second, maturation of the PLPs was blocked during DNA packaging resulting in the accumulation of empty PLPs within the host. In addition to PLPs with normal morphology, smaller heads (apparently T=4) and aberrant spirals were also produced. Interestingly, maturation of the small heads was relatively efficient resulting in the formation of small mature particles that were tailed and contained a head full of DNA. These data suggest that incorporation of portal vertices into heads occurs during growth of the coat lattice at decision points that dictate head assembly fidelity.     

Three amino acids that are critical to formation and stability of the P22 tailspike trimer

The P22 tailspike protein folds by forming a folding competent monomer species that forms a dimeric, then a non-native trimeric (protrimer) species by addition of folding competent monomers. We have found three residues, R549, R563, and D572, which play a critical role in both the stability of the native tailspike protein and assembly and maturation of the protrimer. King and colleagues reported previously that substitution of R563 to glutamine inhibited protrimer formation. We now show that the R549Q and R563K variants significantly delay the protrimer-to-trimer transition both in vivo and in vitro. Previously, variants that destabilize intermediates have shown wild-type chemical stability. Interestingly, both the R549Q and R563K variants destabilize the tailspike trimer in guanidine denaturation studies, indicating that they represent a new class of tailspike folding variants. R549Q has a midpoint of unfolding at 3.2M guanidine, compared to 5.6M for the wild-type tailspike protein, while R563K has a midpoint of unfolding of 1.8 M. R549Q and R563K also denature over a broader pH range than the wild-type tailspike protein and both proteins have increased sensitivity to pH during refolding, suggesting that both residues are involved in ionic interactions. Our model is that R563 and D572 interact to stabilize the adjacent turn, aiding the assembly of the dimer and protrimer species. We believe that the interaction between R563 and D572 is also critical following assembly of the protrimer to properly orient D572 in order to form a salt bridge with R549 during protrimer maturation.     

Structural plasticity of the phage P22 tail needle gp26 probed with xenon gas

The tail needle, gp26, is a highly stable homo‐trimeric fiber found in the tail apparatus of bacteriophage P22. In the mature virion, gp26 is responsible for plugging the DNA exit channel, and likely plays an important role in penetrating the host cell envelope. In this article, we have determined the 1.98 Å resolution crystal structure of gp26 bound to xenon gas. The structure led us to identify a calcium and a chloride ion intimately bound at the interior of α‐helical core, as well as seven small cavities occupied by xenon atoms. The two ions engage in buried polar interactions with gp26 side chains that provide specificity and register to gp26 helical core, thus enhancing its stability. Conversely, the distribution of xenon accessible cavities correlates well with the flexibility of the fiber observed in solution and in the crystal structure. We suggest that small internal cavities in gp26 between the helical core and the C‐terminal tip allow for flexible swinging of the latter, without affecting the overall stability of the protein. The C‐terminal tip may be important in scanning the bacterial surface in search of a cell‐envelope penetration site, or for recognition of a yet unidentified receptor on the surface of the host.     

Cloning, purification, and preliminary characterization by circular dichroism and NMR of a carboxyl-terminal domain of the bacteriophage P22 scaffolding protein.

Assembly of double-stranded DNA viruses and bacteriophages involves the polymerization of several hundred molecules of coat protein, directed by an internal scaffolding protein. A 163-amino acid carboxyl-terminal fragment of the 303-amino acid bacteriophage P22 scaffolding protein was cloned, overexpressed, and purified. This fragment is active in procapsid assembly reactions in vitro. The circular dichroism spectrum of the fragment, as well as the 1D-NMR and 15N-1H HSQC spectra of the uniformly-labeled protein, indicate that stable secondary structure elements are present. Determination of the three dimensional packing of these elements into the folded scaffolding protein fragment is underway. Structure-based drug design targeted at structural proteins required for viral assembly may have potential as a therapeutic strategy.     

Visualization of the maturation transition in bacteriophage P22 by electron cryomicroscopy

Large-scale conformational transitions are involved in the life-cycle of many types of virus. The dsDNA phages, herpesviruses, and adenoviruses must undergo a maturation transition in the course of DNA packaging to convert a scaffolding-containing precursor capsid to the DNA-containing mature virion. This conformational transition converts the procapsid, which is smaller, rounder, and displays a distinctive skewing of the hexameric capsomeres, to the mature virion, which is larger and more angular, with regular hexons. We have used electron cryomicroscopy and image reconstruction to obtain 15 A structures of both bacteriophage P22 procapsids and mature phage. The maturation transition from the procapsid to the phage results in several changes in both the conformations of the individual coat protein subunits and the interactions between neighboring subunits. The most extensive conformational transformation among these is the outward movement of the trimer clusters present at all strict and local 3-fold axes on the procapsid inner surface. As the trimer tips are the sites of scaffolding binding, this helps to explain the role of scaffolding protein in regulating assembly and maturation. We also observe DNA within the capsid packed in a manner consistent with the spool model. These structures allow us to suggest how the binding interactions of scaffolding and DNA with the coat shell may act to control the packaging of the DNA into the expanding procapsids.     

Phage P22 helps phage MB78 to overcome blockage of DNA maturation in rifampicin-resistant host

Bacteriophage MB78, a virulent phage ofSalmonella typhimurium cannot grow in rifampicin-resistant mutant (rif-39) of the host having altered RNA polymerase. The temperate phage P22 which cannot multiply in presence of the virulent phage MB78 can, however, help MB78 to overcome replication inhibition in rif-39. The processing of concatemeric phage DNA to monomer is blocked in this nonpermissive host. Superinfection with P22 induces synthesis of at least five P22 specific polypeptides which help phage MB78 in the processing of the concatemeric DNA and maturation of phage particles.     

Penton release from P22 heat-expanded capsids suggests importance of stabilizing penton-hexon interactions during capsid maturation

Bacteriophage assembly frequently begins with the formation of a precursor capsid that serves as a DNA packaging machine. The DNA packaging is accompanied by a morphogenesis of the small round precursor capsid into a large polyhedral DNA-containing mature phage. In vitro, this transformation can be induced by heat or chemical treatment of P22 procapsids. In this work, we examine bacteriophage P22 morphogenesis by comparing three-dimensional structures of capsids expanded both in vitro by heat treatment and in vivo by DNA packaging. The heat-expanded capsid reveals a structure that is virtually the same as the in vivo expanded capsid except that the pentons, normally present at the icosahedral fivefold positions, have been released. The similarities of these two capsid structures suggest that the mechanism of heat expansion is similar to in vivo expansion. The loss of the pentons further suggests the necessity of specific penton-hexon interactions during expansion. We propose a model whereby the penton-hexon interactions are stabilized through interactions of DNA, coat protein, and other minor proteins. When considered in the context of other studies using chemical or heat treatment of capsids, our study indicates that penton release may be a common trend among double-stranded DNA containing viruses.     

Changes in the capsid structure and stability of defective particles of bacteriophage R17.

Serological and chemical methods were used to compare the capsid structure and stability of R17 phage and amA31 defective particles. Immunodiffusion analysis demonstrated identity between intact R17 and amA31 capside and between dissociated subunits of both R17 and amA31 and purified coat protein. Radioimmunoassays detected an antibody in R17 antisera that binds to intact R17 but could not be absorbed from R17 antisera with amA31. The R17 antibody remaining in amA31-absorbed sera did not neutralize infectivity of R17 phage. Differences between the surface composition of R17 and amA31 capsids were also detected by iodination. Capsids of R17 bound approximately four times more 125I than amA31, which was accounted for by a decreased 125I labeling of coat protein. Finally, amA31 capsids dissociated under milder conditions of sodium dodecyl sulfate treatment than R17 capsids. The sodium dodecyl sulfate dissociation of both R17 and amA31 capsids resulted in the formation of a transient 38,000-dalton intermediate, which subsequently dissociated to coat protein monomers. Preparations of dissociated R17 capsids also contained assembly protein was also found in preparations of dissociated amA31 capsids.