Dephosphorylation-induced structural changes in beta-casein and its amphiphilic fragment in relation to emulsion properties

To promote the understanding of the relationship between emulsifying and molecular properties of proteins/peptides, intact beta-casein (betaCN) and its amphipathic fragment, i.e., betaCN (1-105/107) were dephosphorylated. Dephosphorylation was found not to change significantly their emulsifying properties. Since it is known that the structure of proteins can change upon adsorption onto an interface, the secondary structure of intact beta-casein, its amphipathic fragment, and their dephosphorylated forms, both in solution and after adsorption onto a hydrophobic teflon/water interface, were studied by far-UV circular dichroism spectroscopy. An increased content of secondary structure, especially alpha-helix, was found for all samples after adsorption onto teflon. Dephosphorylation increased the helix-forming propensity, especially for amphipathic fragment of beta-casein. No influence of the secondary structure properties on the emulsion-forming and -stabilizing properties was observed, but a relationship between the maximum surface load and the emulsion-stabilizing properties was found.     

Molecular dynamics simulation of the cooperative adsorption of barley lipid transfer protein and cis-isocohumulone at the vacuum-water interface

Molecular dynamic simulations have been carried out on systems containing a mixture of barley lipid transfer protein (LTP) and cis-isocohumulone (a hop derived iso-alpha-acid) in one of its enol forms, in bulk water and at the vacuum-water interface. In solution, the cis-isocohumulone molecules bind to the surface of the LTP molecule. The mechanism of binding appears to be purely hydrophobic in nature via desolvation of the protein surface. Binding of hop acids to the LTP leads to a small change in the 3-D conformation of the protein, but no change in the proportion of secondary structure present in helices, even though there is a significant degree of hop acid binding to the helical regions. At the vacuum-water interface, cis-isocohumulone shows a high surface activity and adsorbs rapidly at the interface. LTP then shows a preference to bind to the preadsorbed hop acid layer at the interface rather than to the bare water-vacuum interface. The free energy of adsorption of LTP at the hop-vacuum-water interface is more favorable than for adsorption at the vacuum-water interface. Our results support the view that hop iso-alpha-acids promote beer foam stability by forming bridges between separate adsorbed protein molecules, thus strengthening the adsorbed protein layer and reducing foam breakdown by lamellar phase drainage. The results also suggest a second mechanism may also occur, whereby the concentration of protein at the interface is increased via enhanced protein adsorption to adsorbed hop acid layers. This too would increase foam stability through its effect on the stabilizing protein layer around the foam bubbles.     

Continuous foaming for protein recovery: part II. Selective recovery of proteins from binary mixtures

Foam separation may have potential for protein recovery. However, for foam separation to be a viable protein recovery technique it is important to demonstrate, not only that high enrichments and recoveries can be achieved for single proteins, but also that high enrichments and recoveries, together with selectivity of partition, can be achieved for recovery from multi-component mixtures. Most process streams which require purification are indeed complex multi-component mixtures, for example, fermentation broths. In this study, three binary protein mixtures were chosen for continuous foam separation: beta-casein:lysozyme; Bovine serum albumin (BSA):lysozyme and beta-casein:BSA (mixtures 1, 2, and 3, respectively). For each of these mixtures, the expected outcome of each experiment, based on a previous knowledge and determination of relevant protein physical properties, was that the first protein should be preferentially separated into the foam phase. On the basis of results reported in Part I of this study for the continuous foam separation of beta-casein, conditions found to favor maximum enrichment were selected. For each mixture a range of concentrations of both proteins was considered. For mixture 1, maximum protein recoveries in the foam phase were 85.6% and 25% for beta-casein and lysozyme, respectively; and for mixture 2, maximum recoveries of 77. 6% and 18.9% were obtained for BSA and lysozyme, respectively. Maximum enrichment ratios in the foam phase were 79.4 and 2.5 for beta-casein and lysozyme respectively in mixture 1; and 74.0 and 1.4 for BSA and lysozyme respectively in mixture 2. Selective partitioning of beta-casein and BSA into the foam phase was obtained in mixtures 1 and 2, respectively, particularly for protein concentrations at which dilute protein films are known to form at the gas-liquid interface in the foam. Maximum partition ratios for mixtures 1 and 2 were 31.8 and 52.8, respectively. For mixture 3, both BSA and beta-casein were enriched into the foam phase. Maximum enrichments were 42.9 and 24.7 for BSA and beta-casein, respectively; however, selective partitioning in mixture 3 was limited (maximum partition ratio being 1.8).     

FTIR and XPS studies of protein adsorption onto functionalized bioactive glass

Adsorption and structural changes that occur upon interaction between methemoglobin (MetHb) and 5-methyl-aminomethyl-uridine forming enzyme (MnmE) with the surface of a bioactive glass (BG) were investigated by Fourier Transform Infrared (FTIR) spectroscopy and X-ray Photoelectron Spectroscopy (XPS). The effect of glutaraldehyde (GA) as a coupling agent for protein adsorption on BG was also investigated. The comparative analysis of FTIR spectra recorded from lyophilized proteins and from bioactive glass surface after protein adsorption was considered in order to obtain information about the changes in the secondary structure of the proteins. XPS data were used to determine the surface coverage. The unfolding of adsorbed proteins due to interactions between the internal hydrophobic protein domains and the hydrophobic BG surface was evidenced. After adsorption, the amount of α-helix decreases and less ordered structures (turns, random coils and aggregates) are preponderant. These changes are less pronounced on the BG functionalized with GA, suggesting that the treatment with GA preserves significantly larger amounts of α-helices in the structure of both proteins after adsorption.     

Conformational changes and orientation of Humicola lanuginosa lipase on a solid hydrophobic surface: an in situ interface Fourier transform infrared-attenuated total reflection study

This study was done to better understand how lipases are activated at an interface. We investigated the conformational and solvation changes occurring during the adsorption of Humicola lanuginosa lipase (HLL) onto a hydrophobic surface using Fourier transform infrared-attenuated total reflection spectroscopy. The hydrophobic surfaces were obtained by coating silicon attenuated total reflection crystal with octadecyltrichlorosilane. Analysis of vibrational spectra was used to compare the conformation of HLL adsorbed at the aqueous-solid interface with its conformation in solution. X-ray crystallography has shown that HLL exists in two conformations, the closed and open forms. The conformational changes in HLL caused by adsorption onto the surface were compared with those occurring in three reference proteins, bovine serum albumin, lysozyme, and alpha-chymotrypsin. Adsorbed protein layers were prepared using proteins solutions of 0.005 to 0.5 mg/mL. The adsorptions of bovine serum albumin, lysozyme, and alpha-chymotrypsin to the hydrophobic support were accompanied by large unfoldings of ordered structures. In contrast, HLL underwent no secondary structure changes at first stage of adsorption, but there was a slight folding of beta-structures as the lipase monolayer became complete. Solvation studies using deuterated buffer showed an unusual hydrogen/deuterium exchange of the peptide CONH groups of the adsorbed HLL molecules. This exchange is consistent with the lipase being in the native open conformation at the water/hydrophobic interface.     

A comparison of the interfacial interactions of the apoprotein from high density lipoprotein and beta-casein with phospholipids.

The conformations adopted by beta-casein and the total apoprotein from serum high density lipoprotein when spread at the air-water interface are compared; the monolayer data are consistent with the apoprotein being alpha-helical and the beta-casein being disordered with segments distributed in loops and trains. The penetration of these hydrophobic proteins into phosphatidylcholine monolayers in different physical states was investigated. More protein can penetrate into monolayers when they are in the liquid-expanded state; for penetration at constant total surface area the lateral compressibility of the lipid is an important factor. The charge and conformation of the polar group of the phospholipid does not have a major influence on the interaction. The mixed films of lipid and protein have a mosaic structure; probably the beta-casein is in a compressed state whereas the apoprotein is extended as alpha-helices in the plane of the interface. The chain-length depedences of the interaction of the apoprotein with phosphatidylcholine monolayers and bilayers are different; when the apoprotein binds to bilayers of shorter-chain phosphatidylcholines it alters the shape of the lipid-water interface whereas with monolayers the interface remains planar throughout.     

Induction of changes in the secondary structure of globular proteins by a hydrophobic surface

Circular dichroism, ellipsometry and radiolabeling techniques were employed to study the induction of changes in the secondary structure of BSA, myoglobin and cytochrome C by a hydrophobic surface. The results showed that adsorbed protein molecules lose their ordered native structure in the initial stage of adsorption and the structure appears to be a random or disordered conformation. Protein molecules adsorbed in later stages adopt a more ordered secondary structure ( helix and structure). The changes of secondary structure of globular proteins induced by a hydrophobic surface can be explained by the steric interaction between adsorbed proteins as well as by hydrophobic interactions during the adsorption process. In addition, there is obviously an intermediate stage in which the protein molecules are mainly in the structure, indicating that for certain proteins, the structure may be a more stable secondary structure than helix on the hydrophobic surface. Correspondence to: S.-F. Sui     

Measurement of the secondary structure of adsorbed protein by circular dichroism. 1. Measurements of the helix content of adsorbed melittin.

A new circular dichroism (CD) technique is presented which quantifies, in situ, the changes in protein and peptide secondary structure upon adsorption at the quartz/liquid interface. Far-UV CD spectra of adsorbed proteins were recorded from several quartz interfaces contained in a specially constructed cell. Adsorbed, oriented alpha-helical spectra were recorded from hydrophilic and hydrophobic quartz using the bee venom peptide, melittin, which can be induced into an alpha-helical, tetrameric conformation in solution. The hydrophobic quartz provides a model system for oil-in-water emulsions and cell membranes. Surface concentrations were determined by radio-counting and were dependent on the nature of the surface. The characterization of these spectra has been partly achieved using far-UV CD spectra obtained from melittin adsorbed onto hydrophilic colloidal silica particles, where orientation effects are eliminated. Analysis of these spectra reveals considerable denaturation of the helical structures upon adsorption. Surface concentrations from the silica were determined from adsorption isotherms. The surface orientation of adsorbed melittin was dependent on the state of aggregation and hence degree of helicity of the molecule. These results support a model for the mode of action of melittin in lysing membranes.     

PM-IRRAS investigation of the interaction of serum albumin and fibrinogen with a biomedical-grade stainless steel 316LVM surface

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was applied to investigate the interaction of bovine serum albumin (BSA) and fibrinogen with a biomedical-grade 316LVM stainless steel surface, in terms of the adsorption thermodynamics and adsorption-induced secondary structure changes of the proteins. Highly negative apparent Gibbs energy of adsorption values revealed a spontaneous adsorption of both proteins onto the surface, accompanied by significant changes in their secondary structure. It was determined that, at saturated surface coverages, lateral interactions between the adsorbed BSA molecules induced rather extensive secondary structure changes. Fibrinogen's two coiled coils appeared to undergo negligible secondary structure changes upon adsorption of the protein, while large structural rearrangements of the protein's globular domains occurred upon adsorption. The secondary structure of adsorbed fibrinogen was not influenced by lateral interactions between the adsorbed fibrinogen molecules. PM-IRRAS was deemed to be viable for investigating protein adsorption and for obtaining information on adsorption-induced changes in their secondary structures.     

In situ structure and activity studies of an enzyme adsorbed on spectroscopically undetectable particles

The structural characteristics and the activity of a hyperthermophilic endoglucanase were investigated upon adsorption. Silica (hydrophilic) and Teflon (hydrophobic) surfaces were selected for the study. The materials were specially designed so that the interaction of the particles with light was negligible, and the enzyme conformation in the adsorbed state was monitored in situ. The adsorption isotherms were determined, and the adsorbed endoglucanase was studied using a number of spectroscopic techniques, enzymatic activity tests, and dynamic light scattering. Experiments were performed at pH values below, at, and above the isoelectric point of the enzyme. It was shown that the enzyme adsorbed on the hydrophobic surface of Teflon with higher affinity as compared to the hydrophilic silica nanoparticles. In all cases, adsorption was followed by (slight) changes in the secondary structure resulting in decreased beta-structural content. The changes were more profound upon adsorption on Teflon. The adsorbed enzyme remained active in the adsorbed state in spite of the structural changes induced when interacting with the surfaces.     

Molecular mechanism of β-sheet self-organization at water-hydrophobic interfaces

The capacity to form β‐sheet structure and to self‐organize into amyloid aggregates is a property shared by many proteins. Severe neurodegenerative pathologies such as Alzheimer's disease are thought to involve the interaction of amyloidogenic protein oligomers with neuronal membranes. To understand the experimentally observed catalysis of amyloid formation by lipid membranes and other water‐hydrophobic interfaces, we examine the physico‐chemical basis of peptide adsorption and aggregation in a model membrane using atomistic molecular simulations. Blocked octapeptides with simple, repetitive sequences, (Gly‐Ala)₄, and (Gly‐Val)₄, are used as models of β‐sheet‐forming polypeptide chains found in the core of amyloid fibrils. In the presence of an n‐octane phase mimicking the core of lipid membranes, the peptides spontaneously partition at the octane‐water interface. The adsorption of nonpolar sidechains displaces the peptides' conformational equilibrium from a heterogeneous ensemble characterized by a high degree of structural disorder toward a more ordered ensemble favoring β‐hairpins and elongated β‐strands. At the interface, peptides spontaneously aggregate and rapidly evolve β‐sheet structure on a 10 to 100 ns time scale, while aqueous aggregates remain amorphous. Catalysis of β‐sheet formation results from the combination of the hydrophobic effect and of reduced conformational entropy of the polypeptide chain. While the former drives interfacial partition and displaces the conformational equilibrium of monomeric peptides, the planar interface further facilitates β‐sheet organization by increasing peptide concentration and reducing the dimensionality of self‐assembly from three to two. These findings suggest a general mechanism for the formation of β‐sheets on the surface of globular proteins and for amyloid self‐organization at hydrophobic interfaces. Proteins 2010. © 2010 Wiley‐Liss, Inc.     

Kinetic and structural characterization of adsorption-induced unfolding of bovine alpha -lactalbumin.

Conformational changes of bovine alpha-lactalbumin induced by adsorption on a hydrophobic interface are studied by fluorescence and circular dichroism spectroscopy. Adsorption of bovine alpha-lactalbumin on hydrophobic polystyrene nanospheres induces a non-native state of the protein, which is characterized by preserved secondary structure, lost tertiary structure, and release of calcium. This partially denatured state therefore resembles a molten globule state, which is an intermediate in the folding of bovine alpha-lactalbumin. Stopped-flow fluorescence spectroscopy reveals two kinetic phases during adsorption with rate constants k(1) approximately 50 s(-1) and k(2) approximately 8 s(-1). The rate of partial unfolding is remarkably fast and even faster than unfolding induced by the addition of 5.4 m guanidinium hydrochloride to native alpha-lactalbumin. The large unfolding rates exclude the possibility that unfolding of bovine alpha-lactalbumin to the intermediate state occurs before adsorption takes place. Stopped-flow fluorescence anisotropy experiments show that adsorption of bovine alpha-lactalbumin on polystyrene nanospheres occurs within the dead time (15 ms) of the experiment. This shows that the kinetic processes as determined by stopped-flow fluorescence spectroscopy are not affected by diffusion or association processes but are solely caused by unfolding of bovine alpha-lactalbumin induced by adsorption on the polystyrene surface. A scheme is presented that incorporates the results obtained and describes the adsorption of bovine alpha-lactalbumin.     

Effects of gramicidin-A on the adsorption of phospholipids to the air-water interface

Prior studies suggest that the hydrophobic surfactant proteins, SP-B and SP-C, promote adsorption of the lipids in pulmonary surfactant to an air-water interface by stabilizing a negatively curved rate-limiting structure that is intermediate between bilayer vesicles and the surface film. This model predicts that other peptides capable of stabilizing negative curvature should also promote lipid adsorption. Previous reports have shown that under appropriate conditions, gramicidin-A (GrA) induces dioleoyl phosphatidylcholine (DOPC), but not dimyristoyl phosphatidylcholine (DMPC), to form the negatively curved hexagonal-II (H_II) phase. The studies reported here determined if GrA would produce the same effects on adsorption of DMPC and DOPC that the hydrophobic surfactant proteins have on the surfactant lipids. Small angle X-ray scattering and ³¹P-nuclear magnetic resonance confirmed that at the particular conditions used to study adsorption, GrA induced DOPC to form the H_II phase, but DMPC remained lamellar. Measurements of surface tension showed that GrA in vesicles produced a general increase in the rate of adsorption for both phospholipids. When restricted to the interface, however, in preexisting films, GrA with DOPC, but not with DMPC, replicated the ability of the surfactant proteins to promote adsorption of vesicles containing only the lipids. The correlation between the structural and functional effects of GrA with the two phospholipids, and the similar effects on adsorption of GrA with DOPC and the hydrophobic surfactant proteins with the surfactant lipids fit with the model in which SP-B and SP-C facilitate adsorption by stabilizing a rate-limiting intermediate with negative curvature.     

Interaction of mutant influenza virus hemagglutinin fusion peptides with lipid bilayers: probing the role of hydrophobic residue size in the central region of the fusion peptide.

The amino-terminal region of the membrane-anchored subunit of influenza virus hemagglutinin, the fusion peptide, is crucial for membrane fusion of this virus. The peptide is extruded from the interior of the protein and inserted into the lipid bilayer of the target membrane upon induction of a conformational change in the protein by low pH. Although the effects of several mutations in this region on the fusion behavior and the biophysical properties of the corresponding peptides have been studied, the structural requirements for an active fusion peptide have still not been defined. To probe the sensitivity of the fusion peptide structure and function to small hydrophobic perturbations in the middle of the hydrophobic region, we have individually replaced the alanine residues in positions 5 and 7 with smaller (glycine) or bulkier (valine) hydrophobic residues and measured the extent of fusion mediated by these hemagglutinin constructs as well as some biophysical properties of the corresponding synthetic peptides in lipid bilayers. We find that position 5 tolerates a smaller and position 7 a larger hydrophobic side chain. All peptides contained segments of alpha-helical (33-45%) and beta-strand (13-16%) conformation as determined by CD and ATR-FTIR spectroscopy. The order parameters of the peptide helices and the lipid hydrocarbon chains were determined from measurements of the dichroism of the respective infrared absorption bands. Order parameters in the range of 0.0-0.6 were found for the helices of these peptides, which indicate that these peptides are most likely aligned with their alpha-helices at oblique angles to the membrane normal. Some (mostly fusogenic) peptides induced significant increases of the order parameter of the lipid hydrocarbon chains, suggesting that the lipid bilayer becomes more ordered in the presence of these peptides, possibly as a result of dehydration at the membrane surface.     

De novo design and structure-activity relationships of peptide emulsifiers and foaming agents

A series of eight amphipathic peptides (8, 11, 15, 2 x 18, 22, 26, 29 amino acids in length) were designed to investigate the effects of amino acid composition, peptide length and secondary structure on surface activity assessed as emulsification and foaming activity. The potential for alpha-helix formation at the hydrophobic/hydrophilic interface was maximized through the use of helix-forming amino acids, a relatively large hydrophobic surface of 200 degrees of arc and ion pairs between basic and acidic amino acids on the hydrophilic surface. Emulsification activity increased rapidly between 11 and 22 residues as alpha-helicity in aqueous solution increased. Despite their small size, the peptides produced exceptionally stable emulsions, compared with proteins. Foaming activity was enhanced by the presence of aromatic amino acids and the activity of the best peptide examined was superior to that of bovine serum albumin and beta-lactoglobulin.     

Infrared reflection absorption spectroscopy of amphipathic model peptides at the air/water interface

The linear sequence KLAL (KLALKLALKALKAALKLA-NH(2)) and its corresponding d,l-isomers k(9)a(10)-KLAL (KLALKLALkaLKAALKLA-NH(2)) and l(11)k(12)-KLAL (KLALKLALKAlkAALKLA-NH(2)) are model compounds for potentially amphipathic alpha-helical peptides which are able to bind to membranes and to increase the membrane permeability in a structure- and target-dependent manner (Dathe and Wieprecht, 1999) We first studied the secondary structure of KLAL and its analogs bound to the air/water using infrared reflection absorption spectroscopy. For the peptide films the shape and position of the amide I and amide II bands indicate that the KLAL adopts at large areas per molecule an alpha-helical secondary structure, whereas at higher surface pressures or smaller areas it converts into a beta-sheet structure. This transition could be observed in the compression isotherm as well as during the adsorption at the air/water interface from the subphase as a function of time. The secondary structures are essentially orientated parallel to the air/water interface. The analogs with d-amino acids in two different positions of the sequence, k(9)a(10)-KLAL and l(11)k(12)-KLAL, form only beta-sheet structures at all surface pressures. The observed results are interpreted using a comparison of hydrophobic moments calculated for alpha-helices and beta-sheets. The differences between the hydrophobic moments calculated using the consensus scale are not large. Using the optimal matching hydrophobicity scale or the whole-residue hydrophobicity scale the beta-sheet even has the larger hydrophobic moment.     

The interaction of gamma-crystallins with model surfaces.

Three biophysical techniques were employed to study the structure and thermal stability of a series of homologous bovine lens gamma-crystallins upon binding to three model surfaces. The surfaces in order of increasing hydrophobicity were silica, methyl silica, and diphenyl silica. Secondary structure was analyzed by deconvolution Fourier transform infrared spectroscopy, while tertiary structure alterations were probed by front surface fluorescence spectroscopy. The effect of surface binding on protein thermal stability was analyzed by fluorescence and differential scanning calorimetry. The comparison of free and surface-bound protein with variations in the electrostatic and hydrophobic character of both the protein and the adsorbent surface with these techniques demonstrated that: (i) destabilization on hydrophobic surfaces is greater than on a more hydrophilic interface, (ii) detectable conformational changes tend to increase as the hydrophobicity of the surface increases, and (iii) subtle structural differences among proteins can play an important role in determining differences in protein stability and structure upon surface adsorption.     

Conformational analysis of neuropeptide Y-[18-36] analogs in hydrophobic environments.

The interactive and conformational behavior of a series of neuropeptide Y-[18-36] (NPY-[18-36]) analogs in hydrophobic environments have been investigated using reversed-phase high-performance liquid chromatography (RP-HPLC) and circular dichroism (CD) spectroscopy. The peptides studied comprised a series of 16 analogs of NPY-[18-36], each containing a single D-amino acid substitution. The influence of these single L-->D substitutions on the alpha-helical conformation of the NPY-[18-36] analogs in different solvent environments was determined by CD spectroscopy. Retention parameters related to the hydrophobic contact area and the affinity of interaction were determined with an n-octadecyl (C18) adsorbent. Structural transitions for all peptides were manifested as significant changes in the hydrophobic binding domain and surface affinity between 4 degrees C and 37 degrees C. The results indicated that the central region of NPY-[18-36] (residues 23-33) is important for maintenance of the alpha-helical conformation. Moreover, L-->D amino acid residue substitutions within the N- and C-terminal regions, as well as Asn29 and Leu30, do not appear to affect the secondary structure of the peptide. These studies demonstrate that RP-HPLC provides a powerful adjunct for investigations into the induction of stabilized secondary structure in peptides upon their interaction with hydrophobic surfaces.     

Hydrophobic membrane protein from chromatophores of Rhodospirillum rubrum. Structural and spectroscopic studies of monolayers and multilayers.

A hydrophobic, lipid- and pigment-free polypeptide from the chromatophore membrane of Rhodospirillum rubrum was spread from chloroform/methanol, pyridine and formic acid solutions at an air-water interface. Surface pressure versus area isotherms of the monolayers formed at the interface were partially dependent upon the spreading solvent used. From the surface area at 20 dynes/cm compression, an average molecular area of 12.9 nm2/molecule was calculated for a polypeptide monolayer spread from chloroform/methanol. Multilayers built up on germanium plates at different surface pressures were subjected to attenuated total reflection infrared spectroscopy. In all cases the amide I and II absorption bands were typical of alpha-helical and random conformations. Electron microscopy of transferred monolayers replicated by rotary platinum shadowing revealed domains of regular texture in specimens prepared at 20 dynes/cm. Such domains were virtually absent in specimens prepared at 10 and 30 dynes/cm. Light optical diffractometry of the ordered arrays yielded a smallest repetitive area of 13.5 nm2 which agrees well with the molecular area obtained from the monolayer surface. Although no drastic changes in secondary structure were detected in the course of this study, some conformational changes are indicated by solvent-dependent differences in the surface pressure versus area isotherms.     

Induced conformational states of amphipathic peptides in aqueous/lipid environments.

Specific conformational effects have been reported for amphipathic model peptides upon binding of defined hydrophobic domains to nonpolar stationary phases during reversed-phase high performance liquid chromatography (RP-HPLC). Such induced conformations are found to be especially pronounced for peptides that are amphipathic in an alpha-helical conformation. Such induced amphipathic conformations resulted in substantially later elution than predicted using amino acid-based retention coefficients. In the present study, the induced conformational behavior of model peptides observed during RP-HPLC was correlated with their secondary structure as determined by circular dichroism (CD) spectroscopy in both aqueous solution and C18-mimetic environments. The experimental retention times of the peptides studied were found to correlate with their CD spectra in the presence of lipids, whereas a poor correlation was observed with their CD spectra in the presence of trifluoroethanol. A new approach was developed to evaluate the induction of secondary structure in peptides due to interactions at aqueous/lipid interfaces, which involves the measurement of the CD ellipticities of peptides bound to a set of C18-coated quartz plates. An excellent correlation was found in this environment between the RP-HPLC retention times and CD ellipticities of the bound peptides.