Metal retention on pine bark and blast furnace slag--on-site experiment for treatment of low strength landfill leachate

Treatment of landfill leachate using blast furnace slag and pine bark as reactive sorbents was studied in an in situ column experiment at the Lilla Nyby landfill site in Eskilstuna, Sweden. The columns were filled with approximately 101 of each sorbent and leachate was supplied at three different flow rates during a period of 4 months. Samples of inflow and outflow were collected three times a week and were analyzed for physical and chemical parameters, including concentrations of some metals, and toxicity. It was found that pine bark removed metals more efficiently than did the blast furnace slags; that Zn was most efficiently retained in the filters and that both retention time and initial concentration played an important role in the sorption process. It was also observed that the pine bark column did not release COD. No toxicity of the untreated or the treated leachate was found with the test organisms and test responses used.     

Blast Furnace Slag of a Ferrosilicon Firm in Aswan Governorate,Upper Egypt,as an Adsorbent for the Removal of Merocyanine Dye from Its Aqueous Solution

The adsorption potential of the blast furnace slag of a ferrosilicon firm in Aswan Governorate, Egypt, to decolorize aqueous solutions of 3‐methyl‐1‐phenylpyrazol‐5‐one 4[2] merocyanine dye ( 1 ) was investigated at room temperature. The influence of the solution pH, the quantity of adsorbent, the initial concentration of 1 , and the applied contact time were studied with the batch technique. The maximum percentage of removal of 1 was observed at pH 4. The adsorption data were better fitted by the Freundlich than by the Langmuir adsorption isotherm model, confirming the formation of monolayers of 1 on the adsorbent surface. Kinetic rate constants and the transient behavior at different initial concentrations of 1 were determined with both the Lagergren pseudo‐first‐order and the Ho and McKay pseudo‐second‐order kinetic models. The calculated kinetic parameters revealed that the adsorption of 1 on blast furnace slag followed a second‐order chemisorption process.     

Metals sorption from aqueous solutions by Kluyveromyces marxianus: Process optimization,equilibrium modeling and chemical characterization

The dead Kluyveromyces marxianus biomass, a fermentation industry waste, was used to explore its sorption potential for lead, mercury, arsenic, cobalt, and cadmium as a function of pH, biosorbent dosage, contact time, agitation speed, and initial metal concentration. The equilibrium data fitted the Langmuir model better for cobalt and cadmium, but Freundlich isotherm for all metals tested. At equilibrium, the maximum uptake capacity (Qmax) was highest for lead followed by mercury, arsenic, cobalt, and cadmium. The RL values ranged between 0–1, indicating favorable sorption of all test metals by the biosorbent. The maximum Kf value of Pb showed its efficient removal from the solution. However, multi-metal analysis depicted that sorption of all metals decreased except Pb. The potentiometric titration of biosorbent revealed the presence of functional groups viz. amines, carboxylic acids, phosphates, and sulfhydryl group involved in heavy metal sorption. The extent of contribution of functional groups and lipids to biosorption was in the order: carboxylic>lipids>amines>phosphates. Blocking of sulfhydryl group did not have any significant effect on metal sorption.     

Evaluation of Blast Furnace Slag as a Means of Reducing Metal Availability in a Contaminated Sediment for Beneficial Use Purposes

An attractive option for the management of dredged sediment involves the use of dredged sediment for beneficial use purposes, such as for fill material. Treatment (chemical amendment) of contaminated sediment may be necessary to limit the environmental and human availability (bioaccessibility, leachability, plant uptake) of heavy metals associated with the contaminated sediment before it is placed. A laboratory study was conducted to investigate the effect of admixing a specific chemical amendment (blast furnace slag) with slightly contaminated fresh-water sediment for reducing metal availability. Initial characterization tests of the un-amended sediment showed that the some of the metals analyzed were present in relatively available (non-residual) forms. Although sulfide was present in the un-amended sediment, the amount was not sufficient to bind all of the available metals. A series of metal availability testing methods indicated that the amendment of the sediment with blast furnace slag (4% on a dry weight ratio basis) had the potential to slightly reduce the availability of some, but not all of the available metals associated with the sediment. Results of the column and batch leaching tests showed that leachability of certain metals, such as barium, nickel and zinc, was reduced by the amendment, but the leachability of copper increased. The effect of the amendment for decreasing bioaccessibility for lead and arsenic was not demonstrated. The amended soil had a detrimental effect on most of the plant species that were evaluated. The metal availability results for the plant uptake tests were also mixed, with slightly lower uptake of certain metals by corn grown within the amended sediment.     

Conventional crops and organic amendments for Pb, Cd and Zn treatment at a severely contaminated site

The ability of selected plants and amendments to treat Pb, Cd and Zn accumulations from a metalliferous waste disposal site was studied both in the greenhouse and field. Spinach (Spinacea oleracea), cabbage (Brassica oleracea), and a grass-legume mix (red fescue, Festuca rubra; ryegrass, Lolium perenne); and bean (Vicia faba) were grown in the greenhouse on blast furnace slag or baghouse dust amended with composted peat (CP). All plant species accumulated Pb, Cd and Zn to varying degrees. Total soil metal concentrations had a marked influence on plant uptake. Topdressing versus incorporating CP had a significant (p<0.05) effect on spinach and cabbage tissue metal concentrations. Soil Pb and Zn tended to shift towards less bioavailable forms after treatment with CP. Field plots were treated with CP, farmyard manure (FYM), or inorganic fertilizer. Dry matter production of spinach, cabbage and a grass-legume mix was greatest on either the CP or FYM treatments. Phytostabilization in combination with organic amendments may be the most appropriate technology to ensure stabilization of soil metals at this site.     

Hydrophilic compounds in liquids of enzymatic hydrolyzed spruce and pine biomass

This study was focused on organic acids and metals in biofluids of wood. Without seasoning, fresh woods from spruce and bark, phloem, and heartwood from pine were used as materials, which were degraded with either microbes of oyster mushroom, baker’s yeast, or lactic acid bacteria. Due to neutral pH of the fluids, ambient temperature, atmospheric pressure, and short reaction time, native wood microbe populations were supposed to be present. The water content of the fresh woods was 4 to 20%. The study showed that process methodology and experimental conditions affected the generation of lactic, citric, succinic, and adipic acids, which are considered as source chemicals in the biopolymer industry. In addition to the organic acids and metals, the process produced monosaccharides, polysaccharides, and phenolic acids such as benzoic, salicylic, cinnamic, vanillic, tannic, and conifer (ferulic) acids. Concentrations of total acids and acetic and succinic acids in pine fluids from bark, phloem, and heartwood were 58.4 g/kg and 3.5 to 6.9 g/kg, respectively. In spruce, the most dominant acids were l-lactic and l-malic acids. As for metals, Ag and Cr were detected at 0.01-g/kg quantities in pine bark. Alkali metals K, Mg, Sr, and Ca were detected at 10, 8, 1.3, and 4 g/kg, respectively.     

Stimulating effect of bark polar fraction from the terminal leader of Norway spruce, Picea abies, on white pine weevil, Pissodes strobi, feeding and oviposition

Abstract:  The objective of the study was to demonstrate the importance of bark polar fraction from Norway spruce [ Picea abies (L.) Karst.] terminal leaders on the feeding activity and oviposition process of the female white pine weevil, Pissodes strobi (Peck). The bark polar fraction was extracted with a ternary solvent [chloroform, methanol and water (12 : 5 : 3)]. This extracted fraction was added, at different concentrations, to an artificial diet on which mated female white pine weevils could feed and oviposit. The bark polar fraction of Norway spruce terminal leaders promoted white pine weevil oviposition compared with untreated artificial diet. The results of this study contributed to the development of an efficient artificial rearing substrate required to better understand the interactions between white pine weevil and its host plants. The importance of more specific compounds found in the polar fraction could eventually help produce more resistant trees.     

Gradients and dynamics of inner bark and needle osmotic potentials in Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies L. Karst)

Preconditions of phloem transport in conifers are relatively unknown. We studied the variation of needle and inner bark axial osmotic gradients and xylem water potential in Scots pine and Norway spruce by measuring needle and inner bark osmolality in saplings and mature trees over several periods within a growing season. The needle and inner bark osmolality was strongly related to xylem water potential in all studied trees. Sugar concentrations were measured in Scots pine, and they had similar dynamics to inner bark osmolality. The sucrose quantity remained fairly constant over time and position, whereas the other sugars exhibited a larger change with time and position. A small osmotic gradient existed from branch to stem base under pre‐dawn conditions, and the osmotic gradient between upper stem and stem base was close to zero. The turgor in branches was significantly driven by xylem water potential, and the turgor loss point in branches was relatively close to daily minimum needle water potentials typically reported for Scots pine. Our results imply that xylem water potential considerably impacts the turgor pressure gradient driving phloem transport and that gravitation has a relatively large role in phloem transport in the stems of mature Scots pine trees.     

凉水自然保护区不同皮型红松径向生长对气候的响应

运用相关函数及单年分析等树木年轮气候学方法,研究了黑龙江凉水国家自然保护区不同皮型红松径向生长与气候因子的关系、主要影响因子及这种响应关系是否长期稳定.结果表明: 细皮红松更适合做树木年轮气候学分析.两种皮型红松的径向生长对环境变化都比较敏感,对气候因子的响应无显著差异.1902—2009年生长季,尤其当年6月的气候因子是影响研究区两种皮型红松生长的主要因子.其中,温度表现为显著负相关,降水表现为显著正相关.不同时间段内红松径向生长对气候因子的响应存在差异,随着1970年后气温的快速升高及干旱的加剧,两种皮型红松径向生长对气候因子的响应更敏感,尤其表现为对生长季温度和更多季节水热复合因子变化（帕尔默干旱指数）的响应更显著.
     

Copper,Lead, Cadmium,and Zinc Sorption By Waterlogged and Air-Dry Soil

Competitive sorption of copper (Cu), lead (Pb), cadmium (Cd), and zinc (Zn) was studied in three soils of contrasting chemical and physical properties under air-dry and waterlogged conditions. Competitive sorption was determined using the standard batch technique using six solutions, each with Cu, Pb, Cd, and Zn concentrations of approximately 0, 2.5, 5, 10, 20, and 50?mg L^?1Waterlogged soils tended to sorb higher amounts of added Cu, Pb, Zn and Cd relative to soils in the air-dry condition; however, this increase in sorption was generally not statistically (p<0.05) significant. The magnitude of sorption under both waterlogged and air-dry conditions was affected by the type and amount of soil materials involved in metal sorption processes, and competition between other metals for the sorption sites. Metal sorption was closely correlated with soil properties such as cation exchange capacity, organic carbon, and Fe and Mn hydrous oxides. Exchangeable Al may have markedly reduced metal sorption due to its strong affinity for the sorption sites, while increases in exchangeable Mn may have enhanced Zn and Cd sorption. Heavy metal sorption was best described as a combination of both specific and nonspecific interactions. The extractability of Cu, Pb, Cd, and Zn under waterlogged and air-dry conditions was also studied. Three solutions containing these metals were mixed with each soil to achieve a final concentration of 0, 50, and 500?mg kg^?1. Each soil was extracted every 7 days using 1?M MgCl₂ (pH 7) to determine metal extractability. Metal extractability initially decreased then increased due to waterlogging. The increased extractability of added metals was closely related to increased solubility of Fe and Mn suggesting that dissolution of Fe and Mn, oxides under reducing conditions caused a release of previously sorbed Cu, Pb, Cd, and Zn.     

Biosorption of lead, cadmium, and zinc by Citrobacter strain MCM B-181: characterization studies

The biosorption process for removal of lead, cadmium, and zinc by Citrobacter strain MCM B-181, a laboratory isolate, was characterized. Effects of environmental factors and growth conditions on metal uptake capacity were studied. Pretreatment of biomass with chemical agents increased cadmium sorption efficiency; however, there was no significant enhancement in lead and zinc sorption capacity. Metal sorption by Citrobacter strain MCM B-181 was found to be influenced by the pH of the solution, initial metal concentration, biomass concentration, and type of growth medium. The metal sorption process was not affected by the age of the culture or change in temperature. Equilibrium metal sorption was found to fit the Langmuir adsorption model. Kinetic studies showed that metal uptake by Citrobacter strain MCM B-181 was a fast process, requiring <20 min to achieve >90% adsorption efficiency. The presence of cations reduced lead, zinc, and cadmium sorption to the extent of 11. 8%, 84.3%, and 33.4%, respectively. When biomass was exposed to multimetal solutions, metals were adsorbed in the order Co2+ < Ni2+ < Cd2+ < Cu2+ < Zn2+ < Pb2+. Among various anions tested, only phosphate and citrate were found to hamper metal sorption capacity of cells. Biosorbent beads prepared by immobilizing the Citrobacter biomass in polysulfone matrix exhibited high metal loading capacities. A new mathematical model used for batch kinetic studies was found to be highly useful in prediction of experimentally obtained metal concentration profiles as a function of time. Metal desorption studies indicated that Citrobacter beads could, in principle, be regenerated and reused in adsorption-desorption cycles. In an expanded scale trial, biosorbent beads were found to be useful in removal/recovery of metals such as lead from industrial wastewaters.     

Preparation and characterization of silica gel/chitosan composite for the removal of Cu(II) and Pb(II)

Silica gel/chitosan composite (SiCS) was prepared via., sol-gel method by mixing silica gel and chitosan and cross-linked with bifunctional cross-linker glutaraldhyde. The SiCS composite was characterized using FT-IR, SEM-EDAX, XRD and BET methods. The sorption of copper and lead ions onto SiCS has been investigated. The SiCS composite was found to have excellent metal sorption capacity than the silica gel (Si) and chitosan (CS). The sorption experiments were carried out in batch mode to optimize various parameters viz., contact time, pH, initial metal ion concentration, co-ions and temperature that influence the sorption. Langmuir, Freundlich and Dubinin-Radushkevich adsorption isotherm models were applied to describe isotherm constants. Equilibrium data agreed well with the Freundlich isotherm model. Thermodynamic studies revealed that the nature of sorption is spontaneous and endothermic. The SiCS removes metals by means of adsorption and complexation. Sorption capacity of SiCS is compared with other sorbents which suggest that this composite was useful for removing copper and lead from aqueous solution.     

Chromium Biosorption from Cr(VI) Aqueous Solutions by Cupressus lusitanica Bark: Kinetics,Equilibrium and Thermodynamic Studies

The present study investigated the kinetics, equilibrium and thermodynamics of chromium (Cr) ion biosorption from Cr(VI) aqueous solutions by Cupressus lusitanica bark (CLB). CLB total Cr biosorption capacity strongly depended on operating variables such as initial Cr(VI) concentration and contact time: as these variables rose, total Cr biosorption capacity increased significantly. Total Cr biosorption rate also increased with rising solution temperature. The pseudo-second-order model described the total Cr biosorption kinetic data best. Langmuir´s model fitted the experimental equilibrium biosorption data of total Cr best and predicted a maximum total Cr biosorption capacity of 305.4 mg g^-1. Total Cr biosorption by CLB is an endothermic and non-spontaneous process as indicated by the thermodynamic parameters. Results from the present kinetic, equilibrium and thermodynamic studies suggest that CLB biosorbs Cr ions from Cr(VI) aqueous solutions predominantly by a chemical sorption phenomenon. Low cost, availability, renewable nature, and effective total Cr biosorption make CLB a highly attractive and efficient method to remediate Cr(VI)-contaminated water and wastewater.     

Biosorption of Lead from Industrial Wastewater Using Chrysophyllum albidum Seed Shell

The shell of the seed of Chrysophyllum albidum carbon was used to adsorb lead (Pb) from aqueous solution, the sorption process with respect to its equilibria and kinetics as well as the effects of pH, contact time, adsorbent mass, adsorbate concentration, and particle size on adsorption were also studied. The most effective pH range was found to be between 4.5 and 5 for the sorption of the metal ion. The first-order rate equation by Lagergren was tested on the kinetic data and the adsorption process followed first-order rate kinetics. Isotherm data were analyzed for possible agreement with the Langmuir and Freundlich adsorption isotherms; the Freundlich and Langmuir models for dynamics of metal ion uptake proposed in this work fitted the experimental data reasonably well. However, equilibrium sorption data were better represented by Langmuir model than Freundlich. The adsorption capacity calculated from Langmuir isotherm was 72.1 mg Pb (II) g^{- 1} at initial pH of 5.0 at 30°C for the particle size of 1.00 to 1.25 mm with the use of 2.0 g/100 ml adsorbent mass. The structural features of the adsorbent were characterized by Fourier transform infrared (FTIR) spectrometry; the presence of hydroxyl, carbonyl, amide, and phosphate groups confirms the potential mechanism adsorption of the adsorbent. This readily available adsorbent is efficient in the uptake of Pb (II) ion in aqueous solution, thus, it could be an excellent alternative for the removal of heavy metals and organic matter from water and wastewater.     

Removal of cadmium from aqueous system by shelled Moringa oleifera Lam. seed powder

The present study explores the unexploited sorption properties of the plant Moringa oleifera Lam. for decontamination of Cd at laboratory scale. Sorption studies using standard practices were carried out in batch experiments as functions of biomass dosage, contact time, metal concentrations, particle size and pH. Percentage sorption in each case was computed on the basis of Cd estimation using a planar NaI (TI) detector coupled to a 4K MCA (Canberra Accuspec Card with PC-AT 386). The adsorption data accurately in a Freundlich isotherm. Sorption studies resulted in the standardization of optimum conditions for removal of Cd (85.10%) as follows: biomass dosage (4.0 g), metal concentration (25 microg/ml), contact time (40 min) and volume of the test solution (200 ml) at pH 6.5. Fourier transform infrared (FTIR) spectrometry highlighted amino acid-Cd interactions responsible for sorption phenomenon. The findings open up new avenues in the removal of toxic metals by shelled Moringa oleifera seeds (SMOS) from water bodies as low cost, domestic and environmentally friendly safe technology.     

Influence of the Interactions Between Black Carbon and Soil Constituents on the Sorption of Pyrene

Biochar (a kind of black carbon (BC)) has been advocated as a promising additive to farmland, thus it is crucial to understand the influence of BC on the fate of hydrophobic organic chemicals (HOCs) when they exist in soil. This study explored the sorption of pyrene onto a BC sample obtained by pyrolyzing pine sawdust, two soils, clay (kaolinite), and the mixtures thereof to investigate the influence of the interactions between BC and soil constituents on the sorption of HOCs and the mechanisms therein. Sorption of pyrene onto soil?BC mixtures was significantly less than that predicted by the sum of the individual soil and BC sorption, indicating that the sorption of pyrene onto soil and BC did not occur independently. The reduction of BC sorption capacity in soil seemed primarily to be caused by soil dissolved organic matter (DOM), which attenuated pyrene sorption onto BC by 18.7%?40.3% (within pyrene equilibrium concentration range of 0.05?0.5 S _w). These were likely due to the blockage of micropores, reduced accessibility of sorption sites, and binding of pyrene by DOM in aqueous solution. In addition to the DOM effect, kaolinite also diminished pyrene sorption onto BC to some extent, which suggested additional interaction between BC and soil particles. Pyrene sorption onto the soil?BC mixtures varied with water content and contact time. The influence of wet versus dry conditions and contact time on the K_oc of pyrene was more obvious when pyrene equilibrium concentrations were lower. The effect of aging also varied with soil properties. In summary, BC could not behave independently in soil, and its sorption capacity was changed by its interactions with soil constituents, which may be influenced by soil properties, environmental condition, and contact time.     

Concurrent sorption of Ni2+ and Cu2+ by Chlorella vulgaris from a binary metal solution

Kinetics and capacity of Ni2+ and Cu2+ sorption by Chlorella vulgaris were studied using single and binary metal solutions at various concentrations of these metal ions. The second-order rate law best described the kinetics of metal sorption from both single and binary metal systems. C. vulgaris preferentially sorbed Cu2+ over Ni2+ in the binary system. In comparison to the single metal system, the amounts of Ni2+ and Cu2+ sorbed at equilibrium (qe) were respectively 73% and 25%, and the initial rate of sorption (h) was ca. 50% in the case of the binary metal system. The test metals inhibited sorption of each other, thereby indicating competition between Ni2+ and Cu2+ for sorption onto non-specific binding sites. The present study showed that C. vulgaris has specific as well as non-specific sites for the binding of Ni2+ and Cu2+. Participation of these sites for sorption depended on the ratio of Ni2+ and CU2+ in solution. The maximum metal sorption capacity of C. vulgaris was 6.75 mmol g(-1) from the binary metal solution at the tested biomass concentration (100 mg dry weight l(-1)). Total metal sorption was enhanced with increasing total concentration of both the metals up to 1.6 mM, beyond which a decrease occurred. Two-dimensional contour plots were successfully used for the first time for the evaluation of metal sorption potential.     

Acacia nilotica L. Bark Removes Toxic Elements from Solution: Corroboration from Toxicity Bioassay Using Salix viminalis L. in Hydroponic System

The present investigation deals with the advantages and potential of the Acacia nilotica bark as an adsorbent of toxic metals. Bark (1 g) when added to 100 ml of aqueous solution containing 10 μg ml^-1 metal solution exhibited different metal adsorption values for different metals. The order of metal adsorption being Cr ≥ Ni > Cu > Cd > As > Pb. A similar trend of metal adsorption was observed when the bark is reused (1^st recycle) Cr> Ni > Cu > Cd > Pb and also in the column sorption. In order to verify the metal removal property of A. nilotica bark, toxicity bioassay with Salix viminalis stem cuttings in hydroponic system augmented with Cd, Cr, and Pb together with A. nilotica bark powder was carried out. The results of toxicity bioassay confirmed the metal adsorption property of the bark powder. The functions of toxicity studies include leaf area, root length and number of new root primordia produced per stump. The leaf area, root length, and the number of new root primordia increased considerably in the presence of A. nilotica bark. The order of metal toxicity for leaf area and new root primordial is Cd > Cr > Pb. However, for root length the order of metal toxicity is Cr > Cd > Pb. The metal budgets of the leaf and root confirmed that the bark powder had adsorbed substantial amount of toxic metals and thus alleviates the toxicity imposed by the various tested elements. Hence, the utility of A. nilotica bark in developing and designing innovative technology for the clean up of toxic elements in aqueous solutions and possible scope for its use in phytoremediation are discussed.     

The application of a micro-algal/bacterial biofilter for the detoxification of copper and cadmium metal wastes

In the present study the potential of a biofilter containing a mixture of dried micro-algal/bacterial biomass for removing heavy metals (Cu²⁺, Cd²⁺) from dilute electroplating waste was tested. The biomass was produced in an artificial stream using the effluent of a municipal waste water treatment plant as a nutrient source, with the additional benefit of reducing phosphorus and nitrogen loadings. Baseline batch experiments determined that optimum adsorption for both metals (80–100%) were achieved with the deionized-H₂O conditioned biomass at initial pH 4.0. Other biosorption variables (contact time, initial metal concentration) were also tested. Biosorption data were fitted successfully by the Langmuir model and results showed a high affinity of the used biomass for both metals (q_max 18–31 mg metal/g.d.w). Flow-through column experiments containing Ca-alginate/biomass beads showed that metal adsorption depends also on flow-rate and volume of treated waste. Desorption of both metals with weak acids was very successful (95–100%) but the regeneration of the columns was not achieved due to the destabilization of beads.     

Bacterial sorption of heavy metals.

Four bacteria, Bacillus cereus, B. subtilis, Escherichia coli, and Pseudomonas aeruginosa, were examined for the ability to remove Ag+, Cd2+, Cu2+, and La3+ from solution by batch equilibration methods. Cd and Cu sorption over the concentration range 0.001 to 1 mM was described by Freundlich isotherms. At 1 mM concentrations of both Cd2+ and Cu2+, P. aeruginosa and B. cereus were the most and least efficient at metal removal, respectively. Freundlich K constants indicated that E. coli was most efficient at Cd2+ removal and B. subtilis removed the most Cu2+. Removal of Ag+ from solution by bacteria was very efficient; an average of 89% of the total Ag+ was removed from the 1 mM solution, while only 12, 29, and 27% of the total Cd2+, Cu2+, and La3+, respectively, were sorbed from 1 mM solutions. Electron microscopy indicated that La3+ accumulated at the cell surface as needlelike, crystalline precipitates. Silver precipitated as discrete colloidal aggregates at the cell surface and occasionally in the cytoplasm. Neither Cd2+ nor Cu2+ provided enough electron scattering to identify the location of sorption. The affinity series for bacterial removal of these metals decreased in the order Ag greater than La greater than Cu greater than Cd. The results indicate that bacterial cells are capable of binding large quantities of different metals. Adsorption equations may be useful for describing bacterium-metal interactions with metals such as Cd and Cu; however, this approach may not be adequate when precipitation of metals occurs.