Rapid monitoring of autolysis process of proteases by capillary electrophoresis

A protease, MCP-01, produced by a deep-sea psychrotrophic strain of Pseudoaltermonas sp. SM9913 was purified and its autolysis reaction at 20 °C–50 °C was monitored by capillary electrophoresis. Capillary electrophoresis provides a rapid assay because the degree and state of autolysis of protease MCP-01 could be observed within 6 min. The autolysis rate increased as the temperature rose in the tested range. After 30 min incubation at 30 °C, 77% of MCP-01 autolyzed into peptides. However, its activity for the hydrolysis of casein was reduced by only 4%. The rate of loss of activity of MCP-01 was thus slower than that of autolysis of MCP-01 at 30 °C. Similar results were obtained when MCP-01 was incubated at 20 °C, 40 °C and 50 °C. Large peptides produced by autolysis of MCP-01 therefore still have catalytic activity. When these large peptides autolyzed further into smaller peptides, the enzyme conformation that retained its catalytic activity was destroyed and activity was lost.     

Comparative genomics reveals a deep-sea sediment-adapted life style of Pseudoalteromonas sp. SM9913

Deep-sea sediment is one of the most important microbial-driven ecosystems, yet it is not well characterized. Genome sequence analyses of deep-sea sedimentary bacteria would shed light on the understanding of this ecosystem. In this study, the complete genome of deep-sea sedimentary bacterium Pseudoalteromonas sp. SM9913 (SM9913) is described and compared with that of the closely related Antarctic surface sea-water ecotype Pseudoalteromonas haloplanktis TAC125 (TAC125). SM9913 has fewer dioxygenase genes than TAC125, indicating a possible sensitivity to reactive oxygen species. Accordingly, experimental results showed that SM9913 was less tolerant of H₂O₂ than TAC125. SM9913 has gene clusters related to both polar and lateral flagella biosynthesis. Lateral flagella, which are usually present in deep-sea bacteria and absent in the related surface bacteria, are important for the survival of SM9913 in deep-sea environments. With these two flagellar systems, SM9913 can swim in sea water and swarm on the sediment particle surface, favoring the acquisition of nutrients from particulate organic matter and reflecting the particle-associated alternative lifestyle of SM9913 in the deep sea. A total of 12 genomic islands were identified in the genome of SM9913 that may confer specific features unique to SM9913 and absent from TAC125, such as drug and heavy metal resistance. Many signal transduction genes and a glycogen production operon were also present in the SM9913 genome, which may help SM9913 respond to food pulses and store carbon and energy in a deep-sea environment.     

Effects of different buffers on the thermostability and autolysis of a cold-adapted protease MCP-01

A cold-adapted protease MCP-01 was obtained from deep-sea psychrotrophic bacterium Pseudoaltermonas sp. SM9913. The effects of four different buffers, all at 50 mmol/l concentration, on its thermostability and autolysis were studied. The autolysis process of MCP-01 was studied by capillary electrophoresis. The thermostability of MCP-01 increased successively in the following order: carbonate < Tris < phosphate < borate. The optimum temperature for casein hydrolysis also increased in the same order. This suggested that the conformation of MCP-01 was flexible and its autolytic susceptibility was affected by some factors in the buffers such as charge and ionic species. The results also showed that different buffers, in addition to affecting the autolysis speed, gave different patterns of autolysis products. In carbonate buffer, Tris buffer, phosphate buffer and borate buffer, the autolysis patterns of MCP-01 were different. These results suggested that protease MCP-01 probably have different conformations in different buffers, thus exposing different autolysis sites on the enzyme surface. In addition, the loss of activity correlated with the speed of autolysis in the four different buffers, showing that autolysis may be a reason for the low thermostability of the enzyme.     

Synthesis of poly(3-hydroxyalkanoates) by mutant and recombinant Pseudomonas strains

We have studied the accumulation kinetics and physical characteristics of the poly(3-hydroxyalkanoates) (PHAs) formed by several Pseudomonas strains, mutants and recombinants. Although PHA synthesis generally begins only after an essential nutrient such as N, P, S or Mg becomes limiting, we have identified at least one strain (P. putida KT2442) that begins producing PHA during the exponential growth phase. This PHA is chemically and physically identical to that produced by P. oleovorans GPol, the strain in which we first identified PHA. Analysis of the PHA formed by a mutant strain defective in PHA degradation (P. oleovorans GPo500) revealed that the molecular mass (M_w), the monomer composition and thermal characteristics were similar to that of the PHA of the wild-type parent strain P. oleovorans GPo1. The pha locus of P. oleovorans encodes enzymes that are involved in PHA biosynthesis and degradation. It has been subcloned to study the two PHA polymerases separately in a PHA^– mutant (GPp104) derived from P. putida KT2442. The recombinant strains accumulated lower PHA levels than the wild-type strains, and the M_w of these polymers were lower than those produced by the wild-type P. oleovorans and parent strain. The monomer composition of the two PHAs formed by the two PHA polymerases differed, indicating that the PHA polymerases have different substrate specificities for the incorporation of 3-hydroxyoctanoate and 3-hydroxyhexanoate monomers into PHA. Despite these differences, the PHAs formed were essentially indistinguishable from wild-type PHAs with respect to their thermal characteristics.Correspondence to: B. Witholt     

Mutants of Pseudomonas putida affected in poly-3-hydroxyalkanoate synthesis

The generation and characterization of Pseudomonas putida KT2442 mutants affected in poly-3-hydroxyalkanoate (PHA) synthesis are reported. The mutants from P. putida KT2442 carrying several copies of the PHA-polymerase-encoding gene (phaC) were isolated via N-methyl-N′-nitro-N-nitrosoguanidine chemical mutagenesis and contained mutation(s) on genes that are involved in PHA accumulation other than the phaC genes. No PHA-free mutants were obtained, suggesting that there must be various routes for the synthesis of PHA polymerase precursors. One of the isolated mutants (GPp120) accumulated more PHA than the parental strain, and there was virtually no down-regulation of PHA formation by growth in non-limiting amounts of nitrogen, which normally block or reduce formation of PHA. Compared to the parental strain, GPp120 exhibited significant changes in physiology and morphology when grown in minimal medium: the growth rate was reduced more than twofold and cells formed filaments. The other four groups of isolated mutants, with P. putida strains GPp121 to GPp124 as characteristic type strains, exhibited morphological characteristics similar to those of the parental strain. However, they showed reduced PHA production compared to the parental PHA⁺ strain, and especially GPp121 and GPp122 showed PHA formation tightly controlled by nutrient conditions. All of these mutants provide starting points for genetically dissecting the biosynthesis and regulation of PHA precursors. Received: 10 November 1997 / Received revision: 6 February 1998 / Accepted: 6 February 1998     

Application of acetyl-CoA acetyltransferase (AtoAD) in Escherichia coli to increase 3-hydroxyvalerate fraction in poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Polyhydroxyalkanoate (PHA) is a family of biodegradable polymers, and incorporation of different monomers can alter its physical properties. To produce the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV)) containing a high level of 3-hydroxyvalerate (3HV) by altering acetyl-CoA pool levels, we overexpressed an acetyl-CoA acetyltransferase (atoAD) in an engineered E. coli strain, YH090, carrying PHA synthetic genes bktB, phaB, and phaC. It was found that, with introduction of atoAD and with propionate as a co-substrate, 3HV fraction in PHA was increased up to 7.3-fold higher than a strain without atoAD expressed in trans (67.9 mol%). By the analysis of CoA pool concentrations in vivo and in vitro using HPLC and LC-MS, overexpression of AtoAD was shown to decrease the amount of acetyl-CoA and increase the propionyl-CoA/acetyl-CoA ratio, ultimately resulting in an increased 3HV fraction in PHA. Finally, synthesis of P(3HB-co-3HV) containing 57.9 mol% of 3HV was achieved by fed-batch fermentation of YJ101 with propionate.

     

Polyhydroxyalkanoates are essential for maintenance of redox state in the Antarctic bacterium Pseudomonas sp. 14-3 during low temperature adaptation

Polyhydroxyalkanoates (PHAs) are highly reduced bacterial storage compounds that increase fitness in changing environments. We have previously shown that phaRBAC genes from the Antarctic bacterium Pseudomonas sp. 14-3 are located in a genomic island containing other genes probably related with its adaptability to cold environments. In this paper, Pseudomonas sp. 14-3 and its PHA synthase-minus mutant (phaC) were used to asses the effect of PHA accumulation on the adaptability to cold conditions. The phaC mutant was unable to grow at 10°C and was more susceptible to freezing than its parent strain. PHA was necessary for the development of the oxidative stress response induced by cold treatment. Addition of reduced compounds cystine and gluthathione suppressed the cold sensitive phenotype of the phaC mutant. Cold shock produced very rapid degradation of PHA in the wild type strain. The NADH/NAD ratio and NADPH content, estimated by diamide sensitivity, decreased strongly in the mutant after cold shock while only minor changes were observed in the wild type. Accordingly, the level of lipid peroxidation in the mutant strain was 25-fold higher after temperature downshift. We propose that PHA metabolism modulates the availability of reducing equivalents, contributing to alleviate the oxidative stress produced by low temperature.     

一株聚羟基脂肪酸酯合成菌的筛选及鉴定

【背景】传统石油基塑料产品给人类和环境带来的危害日益严重,聚羟基脂肪酸酯(polyhydroxyalknoates,PHA)作为新型可降解塑料原料越来越受到青睐。但PHA生产成本过高,使其推广应用严重受限。筛选适合大规模生产PHA的高产菌株是解决这一问题的重要途径。【目的】以挖掘合成PHA的菌种资源为目标,从极端环境筛选和鉴定新的高产PHA合成菌。【方法】通过尼罗蓝平板分离法和PCR法分离纯化菌株,采用16S rRNA基因鉴定并通过MEGA 6.0软件构建系统发育树,分析菌株的进化关系,最后通过尼罗红染色定性分析和气相色谱法定量测定该菌株在不同时期的PHA积累量。【结果】从盐碱地垃圾沉积物中分离得到了一株高产PHA的菌株,PhaC的PCR扩增结果证实了该菌株是PHA合成菌,经16S rRNA基因鉴定为Pseudomonas brassicacearum,将其命名为NP-2,进一步优化了菌株NP-2的培养条件,在培养48h时PHA积累量最大,达到3.78 mg/mL。【结论】NP-2属于Pseudomonas brassicacearum,能高产PHA。本研究为生产PHA提供了极端环境的...     

Channelling carbon flux through the meta-cleavage route for improved poly(3-hydroxyalkanoate) production from benzoate and lignin-based aromatics in Pseudomonas putida H

Lignin-based aromatics are attractive raw materials to derive medium-chain length poly(3-hydroxyalkanoates) (mcl-PHAs), biodegradable polymers of commercial value. So far, this conversion has exclusively used the ortho-cleavage route of Pseudomonas putida KT2440, which results in the secretion of toxic intermediates and limited performance. Pseudomonas putida H exhibits the ortho- and the meta-cleavage pathways where the latter appears promising because it stoichiometrically yields higher levels of acetyl-CoA. Here, we created a double-mutant H-ΔcatAΔA2 that utilizes the meta route exclusively and synthesized 30% more PHA on benzoate than the parental strain but suffered from catechol accumulation. The single deletion of the catA2 gene in the H strain provoked a slight attenuation on the enzymatic capacity of the ortho route (25%) and activation of the meta route by nearly 8-fold, producing twice as much mcl-PHAs compared to the wild type. Inline, the mutant H-ΔcatA2 showed a 2-fold increase in the intracellular malonyl-CoA abundance – the main precursor for mcl-PHAs synthesis. As inferred from flux simulation and enzyme activity assays, the superior performance of H-ΔcatA2 benefited from reduced flux through the TCA cycle and malic enzyme and diminished by-product formation. In a benzoate-based fed-batch, P. putida H-ΔcatA2 achieved a PHA titre of 6.1 g l^–1 and a volumetric productivity of 1.8 g l^–1 day^–1. Using Kraft lignin hydrolysate as feedstock, the engineered strain formed 1.4 g l^{- 1} PHA. The balancing of carbon flux between the parallel catechol-degrading routes emerges as an important strategy to prevent intermediate accumulation and elevate mcl-PHA production in P. putida H and, as shown here, sets the next level to derive this sustainable biopolymer from lignin hydrolysates and aromatics.     

Isolation and characterization of a fungus <Emphasis Type="Italic">Aspergillus</Emphasis> sp. strain F-3 capable of degrading alkali lignin

A fungus strain F-3 was selected from fungal strains isolated from forest soil in Dalian of China. It was identified as one Aspergillus sp. stain F-3 with its morphologic, cultural characteristics and high homology to the genus of rDNA sequence. The budges or thickened node-like structures are peculiar structures of hyphae of the strain. The fungus degraded 65% of alkali lignin (2,000 mg l⁻¹) after day 8 of incubation at 30°C at pH 7. The removal of colority was up to 100% at 8 days. The biodegradation of lignin by Aspergillus sp. F-3 favored initial pH 7.0. Excess acid or alkali conditions were not propitious to lignin decomposing. Addition of ammonium l-tartrate or glucose delayed or repressed biodegradation activities. During lignin degradation, manganese peroxidase (28.2 U l⁻¹) and laccase (3.5 U l⁻¹)activities were detected after day 7 of incubation. GC-MS analysis of biodegraded products showed strain F-3 could convert alkali lignin into small molecules or other utilizable products. Strain F-3 may co-culture with white rot fungus and decompose alkali lignin effectively.     

The loss of function of PhaC1 is a survival mechanism that counteracts the stress caused by the overproduction of poly‐3‐hydroxyalkanoates in Pseudomonas putidaΔfadBA

The poly‐3‐hydroxylkanoate (PHA)‐overproducing mutant Pseudomonas putida U ΔfadBA (PpΔfadBA) lacks the genes encoding the main β‐oxidation pathway (FadBA). This strain accumulates enormous amounts of bioplastics when cultured in chemically defined media containing PHA precursors (different n‐alkanoic or n‐aryl‐alkanoic acids) and an additional carbon source. In medium containing glucose or 4‐hydroxy‐phenylacetate, the mutant does not accumulate PHAs and grows just as the wild type (P. putida U). However, when the carbon source is octanoate, growth is severely impaired, suggesting that in PpΔfadBA, the metabolic imbalance resulting from a lower rate of β‐oxidation, together with the accumulation of bioplastics, causes severe physiological stress. Here, we show that PpΔfadBA efficiently counteracts this latter effect via a survival mechanism involving the introduction of spontaneous mutations that block PHA accumulation. Surprisingly, genetic analyses of the whole pha cluster revealed that these mutations occurred only in the gene encoding one of the polymerases (phaC1) and that the loss of PhaC1 function was enough to prevent PHA synthesis. The influence of these mutations on the structure of PhaC1 and the existence of a protein–protein (PhaC1–PhaC2) interaction that explains the functionality of the polymerization system are discussed herein.     

Flocculation behavior and mechanism of an exopolysaccharide from the deep-sea psychrophilic bacterium Pseudoalteromonas sp. SM9913

Flocculation behavior and mechanism of the exopolysaccharide secreted by Pseudoalteromonas sp. SM9913 (EPS SM9913), a psychrophilic bacterium isolated from 1855m deep-sea sediment, has been studied in this paper. EPS SM9913 showed a peak flocculating activity of 49.3 in 1g/L kaolin suspension with 4.55mmol/L CaCl2 and the optimum pH range of 5-8. It appears that the flocculating activity of EPS SM9913 was stimulated by Ca2+ and Fe2+. This study found that EPS SM9913 showed a better flocculation performance than Al2(SO4)3 at salinity of 5-100 per thousand or temperatures of 5-15 degrees C. In addition, this EPS was effective to flocculate several other suspended solids. The measured zeta-potentials, the size of flocs formed during the flocculation process and the surface profile of flocs revealed by scan electron micrograph suggest that bridging is the main flocculation mechanism of the studied EPS. Deacetylation of EPS SM9913 resulted in a significant decrease in its flocculating activity indicating that the large number of acetyl groups in EPS SM9913 played an important role in its flocculation performance.     

Impact of low‐intensity pulsed ultrasound on the growth of Schizochytrium sp. for omega‐3 production

Schizochytrium sp. is a microalga that is known for its high content of oils or lipids. It has a high percentage of polyunsaturated fatty acids in the accumulated oil, especially docosahexaenoic acid (DHA). DHA is an important additive for the human diet. Large‐scale production of Schizochytrium sp. can serve as an alternative source of DHA for humans as well as for fish feed, decreasing the burden on aqua systems. Therefore, research on improving the productivity of Schizochytrium attracts a lot of attention. We studied the potential of using low‐intensity pulsed ultrasound (LIPUS) in the growth cycle of Schizochytrium sp. in shake flasks. Different intensities and treatment durations were tested. A positive effect of LIPUS on biomass accumulation was observed in the Schizochytrium sp. culture. Specifically, LIPUS stimulation at the ultrasound intensity of 400 mW/cm² with 20 min per treatment 10 times a day with equal intervals of 2.4 h between the treatments was found to enhance the growth of Schizochytrium biomass most effectively (by up to 20%). Due to the nature of cell division in Schizochytrium sp. which occurs via zoospore formation, LIPUS stimulation was inefficient if applied continuously during all 5 days of the growth cycle. Using microscopy, we studied the interval between zoospore formation in the culture and selected the optimal LIPUS application days (Days 0–1 and Days 4–5 of the 5‐day growth cycle). Microscopic images have also shown that LIPUS stimulation enhances zoospore formation in Schizochytrium sp., leading to more active cell division in the culture. This study shows that LIPUS can serve as an additional tool for cost‐efficiency improvement in the large‐scale production of Schizochytrium as a sustainable and environmentally friendly source of omega‐3 (DHA).     

Zobellella denitrificans strain MW1, a newly isolated bacterium suitable for poly(3-hydroxybutyrate) production from glycerol

Aims: To search for new bacteria for efficient production of polyhydroxyalkanoates (PHAs) from glycerol. Methods and Results: Samples were taken from different environments in Germany and Egypt, and bacteria capable of growing in mineral salts medium with glycerol as sole carbon source were enriched. From a wastewater sediment sample in Egypt, a Gram‐negative bacterium (strain MW1) was isolated that exhibited good growth and that accumulated considerable amounts of polyhydroxybutyrate (PHB) from glycerol and also from other carbon sources. The 16S rRNA gene sequence of this isolate exhibited 98·5% and 96·2% similarity to Zobellella denitrificans strain ZD1 and to Zobellella taiwanensis strain ZT1 respectively. The isolate was therefore affiliated as strain MW1 of Z. denitrificans. Strain MW1 grows optimally on glycerol at 41°C and pH 7·3 and accumulated PHB up to 80·4% (w/w) of cell dry weight. PHB accumulation was growth‐associated. Although it was not an absolute requirement, 20 g l^?1 sodium chloride enhanced both growth (5 g cell dry weight per litre) and PHB content (87%, w/w). Zobellella denitrificans strain MW1 is also capable to accumulate the poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) copolymer if sodium propionate was used as cosubstrate in addition to glycerol. Conclusions: A new PHB‐accumulating strain was isolated and identified. This strain is able to utilize glycerol for growth and PHB accumulation to high content especially in the presence of NaCl that will enable the utilization of waste glycerol from biodiesel industry. Significance and Impact of the Study: This study is the first report on accumulation of PHA in a member of the new genus Zobellella. Furthermore, utilization of glycerol as the sole carbon source for fast growth and PHB biosynthesis, growth in the presence of NaCl and high PHB contents of the cells will make this newly isolated bacterium a potent candidate for industrial production of PHB from crude glycerol occurring as byproduct during biodiesel production.     

Identification of 5-hydroxyhexanoic acid, 4-hydroxyheptanoic acid and 4-hydroxyoctanoic acid as new constituents of bacterial polyhydroxyalkanoic acids

 A recombinant strain of Pseudomonas putida GPp104 (pHP1014::E146), which expressed the polyhydroxyalkanoic acid (PHA) synthase of Thiocapsa pfennigii exhibiting an unusual substrate specificity at a high level was incubated in two-stage batch or fed-batch accumulation experiments with 5-hydroxyhexanoic acid (5HHx) as carbon source in the second cultivation phase, copolyesters of 3-hydroxybutyric acid (3HB) plus 5HHx, or of 3HB, 3-hydroxyhexanoic acid (3HHx) plus 5HHx were accumulated as revealed by gas-chromatographic and ¹³C-NMR spectroscopic analysis. When the recombinant P. putida GPp104 was incubated with 4-hydroxyheptanoic acid (4HHp) as carbon source in the second cultivation phase, a copolyester consisting of 3HB, 3-hydroxyvaleric acid and 3- and 4-hydroxyheptanoic acid accumulated. Providing 4-hydroxyoctanoic acid as carbon source in the second cultivation phase led to the accumulation of a polyester that contained 1–2 mol% 4-hydroxyoctanoic acid besides 3-hydroxyoctanoic acid, 3HHx, 3-hydroxyvaleric acid and 3HB. In addition to PHA containing these new constituents, PHA with 4-hydroxyvaleric acid was accumulated from laevulinic acid. Eleven strains from five genera have been also analysed for their ability to utilize different carbon sources for colony growth, which might serve as potential precursors for the biosynthesis of PHA with unusual constituents. Although most of the carbon sources were utilized by some strains for colony growth, accumulation experiments gave no evidence for the accumulation of new PHA by these wild-type strains. Received: 22 April/Received revision: 23 May 1996/Accepted: 2 June 1996     

Identification and characterization of two polyhydroxyalkanoate biosynthesis loci in Pseudomonas sp. strain 3Y2

A Pseudomonas strain, 3Y2, that produced polyhydroxyalkanoate (PHA) polymers consisting of 3-hydroxybutyric acid (3HB) and medium-chain-length 3-hydroxyalkanoate (mcl-HA) units, with up to 30% 3HB, was isolated. Two PHA biosynthesis loci (pha _Ps-1 and pha _Ps-2) from 3Y2 were cloned by polymerase chain reaction amplification techniques. The pha _Ps-2 locus was similar to the PHA biosynthesis loci of other PHA-producing Pseudomonas strains, with five tandem open reading frames (ORFs) located in the order ORF1 _Ps-2-phaC1 _Ps-2-phaZ _Ps-2-phaC2 _Ps-2-phaD _Ps-2. The pha _Ps-1 locus that contains phaC1 _Ps-1-phaZ _Ps-1 appears to have arisen by a duplication event that placed it downstream of a gene (ORF1 _Ps-1), encoding a putative glucose-methanol-choline flavoprotein oxidoreductase. The PHA synthases 1 encoded by phaC1 _Ps-1 and phaC1 _Ps-2 were investigated by heterologous expression in Wautersia eutropha PHB⁻4. Both synthases displayed similar substrate specificities for incorporating 3HB and mcl-HA units into PHA. The ability of PhaC1 _Ps-1 to confer PHA synthesis, however, appeared reduced compared to that of PhaC1 _Ps-2, since cells harboring PhaC1 _Ps-1 accumulated 2.5 to 4.6 times less PHA than cells expressing PhaC1 _Ps-2. Primary sequence analysis revealed that PhaC1 _Ps-1 had markedly diverged from the other PHA synthases with a relatively high substitution rate (14.9 vs 2% within PhaC1 _Ps-2). The mutations affected a highly conserved C-terminal region and the surroundings of the essential active site cysteine (Cys296) with a loss of hydrophobicity. This led us to predict that if phaC1 _Ps-1 produces a protein product in the native strain, it is likely that PhaC1 _Ps-1 may be destined for elimination by the accumulation of inactivating mutations, although its specialization to accommodate different substrates cannot be eliminated.     

A lower specificity PhaC2 synthase from Pseudomonas stutzeri catalyses the production of copolyesters consisting of short-chain-length and medium-chain-length 3-hydroxyalkanoates

A polyhydroxyalkanoate (PHA) synthase gene phaC2 _Ps from Pseudomonas stutzeri strain 1317 was introduced into a PHA synthase gene phbC _Re negative mutant, Ralstonia eutropha PHB⁻4. It conferred on the host strain the ability to synthesize PHA, the monomer compositions of which varied widely when grown on different carbon sources. During cultivation on gluconate, the presence of phaC2 _Ps in R. eutropha PHB⁻4 led to the accumulation of polyhydroxybutyrate (PHB) homopolymer in an amount of 40.9 wt% in dry cells. With fatty acids, the recombinant successfully produced PHA copolyesters containing both short-chain-length and medium-chain-length 3-hydroxyalkanoate (3HA) of 4–12 carbon atoms in length. When cultivated on a mixture of gluconate and fatty acid, the monomer composition of accumulated PHA was greatly affected and the monomer content was easily regulated by the addition of fatty acids in the cultivation medium. After the (R)-3-hydroxydecanol-ACP:CoA transacylase gene phaG _Pp from Pseudomonas putida was introduced into phaC2 _Ps-containing R. eutropha PHB⁻4, poly(3HB-co-3HA) copolyester with a very high 3-hydroxybutyrate (3HB) fraction (97.3 mol%) was produced from gluconate and the monomer compositions of PHA synthesized from fatty acids were also altered. This study clearly demonstrated that PhaC2_Ps cloned from P. stutzeri 1317 has extraordinarily low substrate specificity in vivo, though it has only 54% identity in comparison to a previously described low-substrate-specificity PHA synthase PhaC1_Ps from Pseudomonas sp. 61–3. This study also indicated that the monomer composition and content of the synthesized PHA can be effectively modulated by controlling the addition of carbon sources or by modifying metabolic pathways in the hosts.     

Hyperproduction of polyesters consisting of medium-chain-length hydroxyalkanoate monomers by strain Pseudomonas stutzeri 1317

Pseudomonas stutzeri strain 1317 was found to grow on various fatty acids, alcohols, diols, as well as glucose and gluconate for the synthesis of polyhydroxyalkanoates (PHA) with various monomer units. The PHA monomer structures were dependent on the type of fatty acids and alcohols, as well as the diols in the culture media. Only even number monomers, such as 3-hydroxyhexanoate (HHx), 3-hydroxyoctanoate (HO) and 3-hydroxydecanoate (HD), were accumulated when even numbered fatty acids, alcohols, glucose and gluconate, as well as diol were used as carbon sources. Odd numbered fatty acids and odd numbered alcohols led to the formation of odd numbered monomers, such as 3-hydroxyvalerate (HV), 3-hydroxyheptanoate (HHp), 3-hydroxynonanoate (HN) and 3-hydroxyundecanoate (HU). The strain tolerated up to 1.5% of ethanol and made 8.3% of PHA when growth was conducted in 1.2% of ethanol. PHA formed up to 77% of cell dry weight when the strain was grown in tridecanoate. PHA synthesis was highly dependent on the nitrogen source. A depletion in nitrogen supply immediately resulted in PHA accumulation in cells grown in the glucose mineral medium.     

Polyhydroxyalkanoate accumulation in Burkholderia sp.: a molecular approach to elucidate the genes involved in the formation of two homopolymers consisting of short-chain-length 3-hydroxyalkanoic acids

Burkholderia sp. accumulates polyhydroxyalkanoates (PHAs) containing 3-hydroxybutyrate and 3-hydroxy-4-pentenoic acid when grown on mineral media under limited phosphate or nitrogen, and using sucrose or gluconate as a carbon and energy source. Solvent fractionation and NMR spectroscopic characterization of these polyesters revealed the simultaneous accumulation of two homopolyesters rather than a co-polyester with random sequence distribution of the monomers [Valentin HE, Berger PA, Gruys KJ, Rodrigues MFA, Steinbüchel A, Tran M, Asrar J (1999) Macromolecules 32: 7389–7395]. To understand the genetic requirements for such unusual polyester accumulation, we probed total genomic DNA from Burkholderia sp. by Southern hybridization experiments using phaC-specific probes. These experiments indicated the presence of more than one PHA synthase gene within the genome of Burkholderia sp. However, when total genomic DNA from Burkholderia sp. was used to complement a PHA-negative mutant of Ralstonia eutropha for PHA accumulation, only one PHA synthase gene was obtained resembling the R. eutropha type of PHA synthases, based on amino acid sequence similarity. In addition to the PHA synthase gene, based on high sequence homology, genes encoding a β-ketothiolase and acetoacetyl-CoA reductase were identified in a gene cluster with the PHA synthase gene. The arrangement of the three genes is quite similar to the R. eutropha poly-β-hydroxybutyrate biosynthesis operon. Received: 3 September 1999 / Received revision: 29 October 1999 / Accepted: 5 November 1999