Three-dimensional co-culture of primary human liver cells in bioreactors for in vitro drug studies: effects of the initial cell quality on the long-term maintenance of hepatocyte-specific functions

In vitro culture models that employ human liver cells could be potent tools for predictive studies on drug toxicity and metabolism in the pharmaceutical industry. A bioreactor culture model was developed that permits the three-dimensional co-culture of liver cells under continuous medium perfusion with decentralised mass exchange and integral oxygenation. We tested the ability of the system to support the long-term maintenance and differentiation of primary human liver cells. The effects of the initial cell quality were investigated by comparing cultures from resected, non-preserved liver with cultures from liver graft tissue damaged by long-term preservation. In cultures originating from non-preserved liver, protein and urea synthesis, glucose metabolism, and cytochrome (CYP450) activities were stable over the 2-week culture period, with maximal activities at the end of the first week in culture. Enzyme induction led to increased 7-ethoxyresorufin O-deethylase activities of up to 20 times the basal value. In cultures from preservation-damaged liver, recovery of metabolic activities was detected during bioreactor culture. After two weeks, most biochemical parameters approached those of cultures from non-preserved human liver. Light microscopy demonstrated the three-dimensional reorganisation of hepatocytes and non-parenchymal cells in co-culture. Long-term maintenance, and even the regeneration of specific functional activities of human liver cells, can be achieved in the bioreactor. This could facilitate the introduction into the pharmaceutical industry of in vitro drug testing with primary human liver cells.     

Combination of biochemical and mechanical cues for tendon tissue engineering

Tendinopathies negatively affect the life quality of millions of people in occupational and athletic settings, as well as the general population. Tendon healing is a slow process, often with insufficient results to restore complete endurance and functionality of the tissue. Tissue engineering, using tendon progenitors, artificial matrices and bioreactors for mechanical stimulation, could be an important approach for treating rips, fraying and tissue rupture. In our work, C3H10T1/2 murine fibroblast cell line was exposed to a combination of stimuli: a biochemical stimulus provided by Transforming Growth Factor Beta (TGF‐β) and Ascorbic Acid (AA); a three‐dimensional environment represented by PEGylated‐Fibrinogen (PEG‐Fibrinogen) biomimetic matrix; and a mechanical induction exploiting a custom bioreactor applying uniaxial stretching. In vitro analyses by immunofluorescence and mechanical testing revealed that the proposed combined approach favours the organization of a three‐dimensional tissue‐like structure promoting a remarkable arrangement of the cells and the neo‐extracellular matrix, reflecting into enhanced mechanical strength. The proposed method represents a novel approach for tendon tissue engineering, demonstrating how the combined effect of biochemical and mechanical stimuli ameliorates biological and mechanical properties of the artificial tissue compared to those obtained with single inducement.     

Perfusion bioreactor system for human mesenchymal stem cell tissue engineering: dynamic cell seeding and construct development

Human mesenchymal stem cells (hMSCs) have great potential for therapeutic applications. A bioreactor system that supports long-term hMSCs growth and three-dimensional (3-D) tissue formation is an important technology for hMSC tissue engineering. A 3-D perfusion bioreactor system was designed using non-woven poly (ethylene terepthalate) (PET) fibrous matrices as scaffolds. The main features of the perfusion bioreactor system are its modular design and integrated seeding operation. Modular design of the bioreactor system allows the growth of multiple engineered tissue constructs and provides flexibility in harvesting the constructs at different time points. In this study, four chambers with three matrices in each were utilized for hMSC construct development. The dynamic depth filtration seeding operation is incorporated in the system by perfusing cell suspensions perpendicularly through the PET matrices, achieving a maximum seeding efficiency of 68%, and the operation effectively reduced the complexity of operation and the risk of contamination. Statistical analyses suggest that the cells are uniformly distributed in the matrices. After seeding, long-term construct cultivation was conducted by perfusing the media around the constructs from both sides of the matrices. Compared to the static cultures, a significantly higher cell density of 4.22 x 10(7) cell/mL was reached over a 40-day culture period. Cellular constructs at different positions in the flow chamber have statistically identical cell densities over the culture period. After expansion, the cells in the construct maintained the potential to differentiate into osteoblastic and adipogenic lineages at high cell density. The perfusion bioreactor system is amenable to multiple tissue engineered construct production, uniform tissue development, and yet is simple to operate and can be scaled up for potential clinical use. The results also demonstrate that the multi-lineage differentiation potential of hMSCs are preserved even after extensive expansion, thus indicating the potential of hMSCs for functional tissue construct development. The system has important applications in stem cell tissue engineering.     

动物细胞培养用生物反应器及相关技术

动物细胞大量培养是生产生物制品的重要途径,它用到的关键设备是生物反应器。根据培养细胞、培养载体、培养液混合方式的不同,生物反应器主要有搅拌式、气升式、中空纤维式、回转式等,其中搅拌式规模最大。回转式是NASA于20世纪90年代中期开发的一种新型生物反应器,被誉为空间生物反应器,可用于组织工程研究。与生物反应器配套的技术主要有灌注、微载体、多孔微球、转入抗凋亡基因等,可以有效地提高细胞密度,增加生物制品产量,提高质量。今后生物反应器研制主要朝两个方向发展:一是,以高密度培养动物细胞生产蛋白质药物为目的,二是以三维培养动物细胞(主要是人类细胞)再生组织或器官为目的。     

Robust differentiation of fetal hepatocytes from human embryonic stem cells and iPS

Hepatocyte transplantation is considered as an alternative to organ transplantation in particular for the treatment of liver metabolic diseases. However, due to the difficulties to obtain a large number of hepatocytes, new sources of cells are needed. These cells could be either of hepatic origin (hepatic stem cells) or extrahepatic such as mesenchymal stem cells or pluripotent stem cells (human embryonic stem cells [hESC] or iPS). We developed a new method to differentiate hESCs into fetal hepatocytes. These conditions recapitulate the main liver developmental stages, using fully defined medium devoid of animal products or unknown factors. The differentiated cells express many fetal hepatocytes markers (cytochrome P450 3A7, albumin, alpha-1-antitrypsin, etc.). The cells display specific hepatic functions (ammonia metabolism, excretion of indocyanin green) and are capable to engraft and express hepatic proteins two months after transplantation into newborn uPAxrag2gc-/- mouse liver. We have also showed that this approach is transposable to human iPS, and further studies on animal models will allow us to compare the in vivo potential of these two sources of pluripotent cells. Finally, only studies on large animals such as nonhuman primates will validate an eventual clinical application.     

胚胎干细胞分化为肝细胞的研究进展

目前 ,细胞移植作为终末期肝病的辅助治疗方法 ,移植的细胞必须满足在受体肝脏中存活、增殖并可分化为成熟肝细胞两个重要条件 ,但目前应用的肝细胞来源有限 ,其功能随着培养时间的延长而逐渐下降等问题限制了这一治疗策略的广泛开展。作为具有发育全能性和无限增殖能力的细胞 ,胚胎干细胞向肝细胞的分化研究近年来引起了广泛的关注 ,并取得了较大的进展 ,寻找合适、高效的分化诱导方法是目前研究的热点之一。胚胎干细胞向肝细胞的分化研究既可以为临床细胞替代治疗提供合适的细胞来源 ,也可以在药物评估和肝脏发育分化基础研究方面起到重要的作用。通过概括肝脏和拟胚体分化发育的分子机制 ,对体外胚胎干细胞向肝细胞分化的几种诱导体系作了介绍 ,并对分化肝细胞的应用前景和存在的问题进行了讨论。     

Preclinical characterization of alginate‐poly‐L‐lysine encapsulated HepaRG for extracorporeal liver supply

We recently demonstrated that HepaRG cells encapsulated into 1.5% alginate beads are capable of self‐assembling into spheroids. They adequately differentiate into hepatocyte‐like cells, with hepatic features observed at Day 14 post‐encapsulation required for external bioartificial liver applications. Preliminary investigations performed within a bioreactor under shear stress conditions and using a culture medium mimicking acute liver failure (ALF) highlighted the need to reinforce beads with a polymer coating. We demonstrated in a first step that a poly‐l ‐lysine coating improved the mechanical stability, without altering the metabolic activities necessary for bioartificial liver applications (such as ammonia and lactate elimination). In a second step, we tested the optimized biomass in a newly designed perfused dynamic bioreactor, in the presence of the medium model for pathological plasma for 6 h. Performances of the biomass were enhanced as compared to the steady configuration, demonstrating its efficacy in decreasing the typical toxins of ALF. This type of bioreactor is easy to scale up as it relies on the number of micro‐encapsulated cells, and could provide an adequate hepatic biomass for liver supply. Its design allows it to be integrated into a hybrid artificial/bioartificial liver setup for further clinical studies regarding its impact on ALF animal models.     

Computational fluid modeling and performance analysis of a bidirectional rotating perfusion culture system

A myriad of bioreactor configurations have been investigated as extracorporeal medical support systems for temporary replacement of vital organ functions. In recent years, studies have demonstrated that the rotating bioreactors have the potential to be utilized as bioartificial liver assist devices (BLADs) owing to their advantage of ease of scalability of cell‐culture volume. However, the fluid movement in the rotating chamber will expose the suspended cells to unwanted flow structures with abnormally high shear conditions that may result in poor cell stability and in turn lower the efficacy of the bioreactor system. In this study, we compared the hydrodynamic performance of our modified rotating bioreactor design with that of an existing rotating bioreactor design. Computational fluid dynamic analysis coupled with experimental results were employed in the optimization process for the development of the modified bioreactor design. Our simulation results showed that the modified bioreactor had lower fluid induced shear stresses and more uniform flow conditions within its rotating chamber than the conventional design. Experimental results revealed that the cells within the modified bioreactor also exhibited better cell‐carrier attachment, higher metabolic activity, and cell viability compared to those in the conventional design. In conclusion, this study was able to provide important insights into the flow physics within the rotating bioreactors, and help enhanced the hydrodynamic performance of an existing rotating bioreactor for BLAD applications. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1002–1012, 2013     

Tissue engineering by cell transplantation using degradable polymer substrates.

This paper reviews our research in developing novel matrices for cell transplantation using bioresorbable polymers. We focus on applications to liver and cartilage as paradigms for regeneration of metabolic and structural tissue, but review the approach in the context of cell transplantation as a whole. Important engineering issues in the design of successful devices are the surface chemistry and surface microstructure, which influence the ability of the cells to attach, grow, and function normally; the porosity and macroscopic dimensions, which affect the transport of nutrients to the implanted cells; the shape, which may be necessary for proper function in tissues like cartilage; and the choice of implantation site, which may be dictated by the total mass of the implant and which may influence the dimensions of the device by the available vascularity. Studies show that both liver and cartilage cells can be transplanted in small animals using this approach.     

Advanced bioreactor with controlled application of multi-dimensional strain for tissue engineering

Advanced bioreactors are essential for meeting the complex requirements of in vitro engineering functional skeletal tissues. To address this need, we have developed a computer controlled bench-top bioreactor system with capability to apply complex concurrent mechanical strains to three-dimensional matrices independently housed in 24 reactor vessels, in conjunction with enhanced environmental and fluidic control. We demonstrate the potential of this new system to address needs in tissue engineering, specifically toward the development of a tissue engineered anterior cruciate ligament from human bone-marrow stromal cells (hBMSC), where complex mechanical and biochemical environment control is essential to tissue function. Well-controlled mechanical strains (resolution of < 0.1 micron for translational and < 0.1 degree for rotational strain) and dissolved oxygen tension (between 0%-95% +/- 1%) could be applied to the developing tissue, while maintaining temperature at 37 +/- 0.2 degrees C about developing tissue over prolonged periods of operation. A total of 48 reactor vessels containing cell culture medium and silk fiber matrices were run for up to 21 days under 90 degrees rotational and 2 mm translational deformations at 0.0167 Hz with only one succumbing to contamination due to a leak at an medium outlet port. Twenty-four silk fiber matrices seeded with human bone marrow stromal cells (hBMSCs) housed within reactor vessels were maintained at constant temperature (37 +/- 0.2 degrees C), pH (7.4 +/- 0.02), and pO2 (20 +/- 0.5%) over 14 days in culture. The system supported cell spreading and growth on the silk fiber matrices based on SEM characterization, as well as the differentiation of the cells into ligament-like cells and tissue (Altman et al., 2001).     

A bioreactor test system to mimic the biological and mechanical environment of oral soft tissues and to evaluate substitutes for connective tissue grafts

Gingival cells of the oral connective tissue are exposed to complex mechanical forces during mastication, speech, tooth movement and orthodontic treatments. Especially during wound healing following surgical procedures, internal and external forces may occur, creating pressure upon the newly formed tissue. This clinical situation has to be considered when developing biomaterials to augment soft tissue in the oral cavity. In order to pre‐evaluate a collagen sponge intended to serve as a substitute for autogenous connective tissue grafts (CTGs), a dynamic bioreactor system was developed. Pressure and shear forces can be applied in this bioreactor in addition to a constant medium perfusion to cell‐material constructs. Three‐dimensional volume changes and stiffness of the matrices were analyzed. In addition, cell responses such as cell vitality and extracellular matrix (ECM) production were investigated. The number of metabolic active cells constantly increased under fully dynamic culture conditions. The sponges remained elastic even after mechanical forces were applied for 14 days. Analysis of collagen type I and fibronectin revealed a statistically significant accumulation of these ECM molecules (P < 0.05–0.001) when compared to static cultures. An increased expression of tenascin‐c, indicating tissue remodeling processes, was observed under dynamic conditions only. The results indicate that the tested in vitro cell culture system was able to mimic both the biological and mechanical environments of the clinical situation in a healing wound. Biotechnol. Bioeng. 2010;107: 1029–1039. © 2010 Wiley Periodicals, Inc.     

类器官的应用研究进展

类器官是利用干细胞的自我更新和分化能力,在体外培养形成的一种微小组织器官类似物,在很大程度上具有体内相应器官的功能。迄今为止,在3D培养条件下,已经成功培养出多种类器官如肺、胃、肠、肝和肾等类器官。它们不仅可作为组织器官的替代品用于药物和临床研究,还可用于体内器官移植。本文综述了类器官在药物毒性检测、药效评价和新药筛选中的作用以及利用类器官建立疾病模型、研究组织器官发育和类器官在精准医疗、再生医学中的价值。     

Massive culture of human liver cancer cells in a newly developed radial flow bioreactor system: Ultrafine structure of functionally enhanced hepatocarcinoma cell lines

Summary With a view to initiating clinical trials, cell morphology and function for a newly developed artificial liver support system employing highly functional human liver cell line, FLC-7, cultured in a radial flow bioreactor were compared to cells grown in a conventional monolayer culture. The radial flow bioreactor consists of a vertically extended cylindrical matrix comprised of porous glass bead microcarriers through which liquid medium flows from the periphery in toward the central axis generating a beneficial concentration gradient of oxygen and nutrients, while preventing excessive shear stresses or buildup of waste products. The three-dimensional culture system supports high-density (1.1 × 10⁸ cells/ml-matrix), large scale cultures (4.4 × 10¹⁰ cells/400 ml-bioreactor) with long-term viability. Scanning and transmission electron microscopy (SEM and TEM) revealed that cells cultured in a monolayer system were flattened and extended with numerous cytoplasmic projections. Cells in the three-dimensional culture were spherical and covered with microvillilike processes resembling liver cells in vivo. The cells were solidly attached on the surfaces and within the pores of the microcarriers in highly dense colonies. The spherical cells remained in close contact with adjacent cells, while circulation of liquid medium flowed freely through spaces between cells. FLC-7 cells produced albumin at a rate of 6.41 μg/24 h/10⁶ cells. Alpha-fetoprotein (AFP) production dropped nearly threefold in comparison to monolayer cultures. Results demonstrated that the new artificial liver support systems (ALSS) provides a superior three-dimensional culture environment that allows cells to perform at naturally functioning levels.     

Cryopreservation of isolated human hepatocytes for transplantation: State of the art

Hepatocytes isolated from unused donor livers are being used for transplantation in patients with acute liver failure and liver-based metabolic defects. As large numbers of hepatocytes can be prepared from a single liver and hepatocytes need to be available for emergency and repeated treatment of patients it is essential to be able to cryopreserve and store cells with good thawed cell function. This review considers the current status of cryopreservation of human hepatocytes discussing the different stages involved in the process. These include pre-treatment of cells, freezing solution, cryoprotectants and freezing and thawing protocols. There are detrimental effects of cryopreservation on hepatocyte structure and metabolic function, including cell attachment, which is important to the engraftment of transplanted cells in the liver. Cryopreserved human hepatocytes have been successfully used in clinical transplantation, with evidence of replacement of missing function. Further optimisation of hepatocyte cryopreservation protocols is important for their use in hepatocyte transplantation.     

3D culture of osteoblast‐like cells by unidirectional or oscillatory flow for bone tissue engineering

A medium perfusion system is expected to be beneficial for three‐dimensional (3D) culture of engineered bone, not only by chemotransport enhancement but also by mechanical stimulation. In this study, perfusion systems with either unidirectional or oscillatory medium flow were developed, and the effects of the different flow profiles on 3D culturing of engineered bone were studied. Mouse osteoblast‐like MC 3T3‐E1 cells were 3D‐cultured with porous ceramic scaffolds in vitro for 6 days under static and hydrodynamic conditions with either a unidirectional or oscillatory flow. We found that, in the static culture, the cells proliferated only on the scaffold surfaces. In perfusion culture with the unidirectional flow, the proliferation was significantly higher than in the other groups but was very inhomogeneous, which made the construct unsuitable for transplantation. Only the oscillatory flow allowed osteogenic cells to proliferate uniformly throughout the scaffolds, and also increased the activity of alkaline phosphatase (ALP). These results suggested that oscillatory flow might be better than unidirectional flow for 3D construction of cell‐seeded artificial bone. The oscillatory perfusion system could be a compact, safe, and efficient bioreactor for bone tissue engineering. Biotechnol. Bioeng. 2009;102: 1670–1678. © 2008 Wiley Periodicals, Inc.     

Activated Kupffer cells cause a hypermetabolic state after gentle in situ manipulation of liver in rats

Harvesting trauma to the graft dramatically decreases survival after liver transplantation. Since activated Kupffer cells play a role in primary nonfunction, the purpose of this study was to test the hypothesis that organ manipulation activates Kupffer cells. To mimic what occurs with donor hepatectomy, livers from Sprague-Dawley rats underwent dissection with or without gentle organ manipulation in a standardized manner in situ. Perfused livers exhibited normal values for O(2) uptake (105 +/- 5 micromol. g(-1). h(-1)) measured polarigraphically; however, 2 h after organ manipulation, values increased significantly to 160 +/- 8 micromol. g(-1). h(-1) and binding of pimonidazole, a hypoxia marker, increased about threefold (P < 0.05). Moreover, Kupffer cells from manipulated livers produced three- to fourfold more tumor necrosis factor-alpha and PGE(2), whereas intracellular calcium concentration increased twofold after lipopolysaccharide compared with unmanipulated controls (P < 0.05). Gadolinium chloride and glycine prevented both activation of Kupffer cells and effects of organ manipulation. Furthermore, indomethacin given 1 h before manipulation prevented the hypermetabolic state, hypoxia, depletion of glycogen, and release of PGE(2) from Kupffer cells. These data indicate that gentle organ manipulation during surgery activates Kupffer cells, leading to metabolic changes dependent on PGE(2) from Kupffer cells, which most likely impairs liver function. Thus modulation of Kupffer cell function before organ harvest could be beneficial in human liver transplantation and surgery.     

From hepatocytes to stem and progenitor cells for liver regenerative medicine: advances and clinical perspectives

The parenchymal liver cell is a unique fully functional metabolic unit that can be used for liver regenerative medicine to restore function of the diseased organ; the aim of the procedure is to prevent progression of end-stage disease. The alternative, orthotopic liver transplantation, is highly intrusive, irreversible and limited by general organ shortage. Mature liver cell - hepatocyte - transplantation has been shown to have short- to medium-term efficacy for correction of miscellaneous inborn errors of metabolism. However, although proof of concept has been established, the procedure has not yet achieved full success, due to limited durability of functional benefit. Hepatocyte procurement is also restricted by organ shortage, and their storage is difficult due to poor tolerance of cryopreservation. Alternative cell sources are therefore needed for development and wider accessibility of cell-based liver regenerative medicine. Besides safety, the main challenge for these alternative cells is to acquire similar levels of functionality once implanted into the target organ. In this respect, liver derived progenitor cells may have some advantages over stem cells derived from other tissues.