Enhanced preference for pi-bond containing substrates is correlated to Pro110 in the substrate-binding tunnel of Escherichia coli thioesterase I/protease I/lysophospholipase L(1)

Escherichia coli thioesterase I/protease I/lysophospholipase L(1) (TAP) possesses multifunctional enzyme with thioesterase, esterase, arylesterase, protease, and lysophospholipase activities. Leu109, located at the substrate-binding tunnel, when substituted with proline (Pro) in TAP, shifted the substrate-preference from medium-to-long acyl chains to shorter acyl chains of triglyceride and p-nitrophenyl ester, and increased the preference for aromatic-amino acid-derived esters. In the three-dimensional TAP structures, the only noticeable alteration of backbone and side chain conformation was located at the downstream Pro110-Ala123 region rather than at Pro109 itself. The residue Pro110, adjacent to Leu109 or Pro109, was found to contribute to the substrate preference of TAP enzymes for esters containing acyl groups with pi bond(s) or aromatic group(s). Some of the interactions between the enzyme protein and the substrate may be contributed by an attractive force between the Pro110 C-H donor and the substrate pi-acceptor.     

Crystal structure of Escherichia coli thioesterase I/protease I/lysophospholipase L1: consensus sequence blocks constitute the catalytic center of SGNH-hydrolases through a conserved hydrogen bond network

Escherichia coli thioesterase I (TAP) is a multifunctional enzyme possessing activities of thioesterase, esterase, arylesterase, protease, and lysophospholipase. In particular, TAP has stereoselectivity for amino acid derivative substrates, hence it is useful for the kinetic resolution of racemic mixtures of industrial chemicals. In the present work, the crystal structure of native TAP was determined at 1.9A, revealing a minimal SGNH-hydrolase fold. The structure of TAP in complex with a diethyl phosphono moiety (DEP) identified its catalytic triad, Ser10-Asp154-His157, and oxyanion hole, Ser10-Gly44-Asn73. The oxyanion hole of TAP consists of three residues each separated from the other by more than 3.5A, implying that all of them are highly polarized when substrate bound. The catalytic (His)C(epsilon1)-H...O=C hydrogen bond usually plays a role in the catalytic mechanisms of most serine hydrolases, however, there were none present in SGNH-hydrolases. We propose that the existence of the highly polarized tri-residue-constituted oxyanion hole compensates for the lack of a (His)C(epsilon1)-H...O=C hydrogen bond. This suggests that members of the SGNH-hydrolase family may employ a unique catalytic mechanism. In addition, most SGNH-hydrolases have low sequence identities and presently there is no clear criterion to define consensus sequence blocks. Through comparison of TAP and the three SGNH-hydrolase structures currently known, we have identified a unique hydrogen bond network which stabilizes the catalytic center: a newly discovered structural feature of SGNH-hydrolases. We have defined these consensus sequence blocks providing a basis for the sub-classification of SGNH-hydrolases.     

Structural and Functional Characterisation of TesA - A Novel Lysophospholipase A from Pseudomonas aeruginosa

TesA from Pseudomonas aeruginosa belongs to the GDSL hydrolase family of serine esterases and lipases that possess a broad substrate- and regiospecificity. It shows high sequence homology to TAP, a multifunctional enzyme from Escherichia coli exhibiting thioesterase, lysophospholipase A, protease and arylesterase activities. Recently, we demonstrated high arylesterase activity for TesA, but only minor thioesterase and no protease activity. Here, we present a comparative analysis of TesA and TAP at the structural, biochemical and physiological levels. The crystal structure of TesA was determined at 1.9 Å and structural differences were identified, providing a possible explanation for the differences in substrate specificities. The comparison of TesA with other GDSL-hydrolase structures revealed that the flexibility of active-site loops significantly affects their substrate specificity. This assumption was tested using a rational approach: we have engineered the putative coenzyme A thioester binding site of E. coli TAP into TesA of P. aeruginosa by introducing mutations D17S and L162R. This TesA variant showed increased thioesterase activity comparable to that of TAP. TesA is the first lysophospholipase A described for the opportunistic human pathogen P. aeruginosa. The enzyme is localized in the periplasm and may exert important functions in the homeostasis of phospholipids or detoxification of lysophospholipids.     

Cosubstrate-induced dynamics of D-3-hydroxybutyrate dehydrogenase from Pseudomonas putida

D-3-Hydroxybutyrate dehydrogenase from Pseudomonas putida belongs to the family of short-chain dehydrogenases/reductases. We have determined X-ray structures of the D-3-hydroxybutyrate dehydrogenase from Pseudomonas putida, which was recombinantly expressed in Escherichia coli, in three different crystal forms to resolutions between 1.9 and 2.1 A. The so-called substrate-binding loop (residues 187-210) was partially disordered in several subunits, in both the presence and absence of NAD(+). However, in two subunits, this loop was completely defined in an open conformation in the apoenzyme and in a closed conformation in the complex structure with NAD(+). Structural comparisons indicated that the loop moves as a rigid body by about 46 degrees . However, the two small alpha-helices (alphaFG1 and alphaFG2) of the loop also re-orientated slightly during the conformational change. Probably, the interactions of Val185, Thr187 and Leu189 with the cosubstrate induced the conformational change. A model of the binding mode of the substrate D-3-hydroxybutyrate indicated that the loop in the closed conformation, as a result of NAD(+) binding, is positioned competent for catalysis. Gln193 is the only residue of the substrate-binding loop that interacts directly with the substrate. A translation, libration and screw (TLS) analysis of the rigid body movement of the loop in the crystal showed significant librational displacements, describing the coordinated movement of the substrate-binding loop in the crystal. NAD(+) binding increased the flexibility of the substrate-binding loop and shifted the equilibrium between the open and closed forms towards the closed form. The finding that all NAD(+) -bound subunits are present in the closed form and all NAD(+) -free subunits in the open form indicates that the loop closure is induced by cosubstrate binding alone. This mechanism may contribute to the sequential binding of cosubstrate followed by substrate.     

The Escherichia coli pldC gene encoding lysophospholipase L(1) is identical to the apeA and tesA genes encoding protease I and thioesterase I, respectively.

We deduced the amino acid sequence of Escherichia coli lysophospholipase L(1) by determining the nucleotide sequence of the pldC gene encoding this enzyme. The translated protein was found to contain 208 amino acid residues with a hydrophobic leader sequence of 26 amino acid residues. The molecular weight of the purified enzyme (20,500) was in good agreement with the predicted size (20,399) of the processed protein. A search involving a data bank showed that the nucleotide sequence of the pldC gene was identical to those of the apeA and tesA genes encoding protease I and thioesterase I, respectively. Consistent with the identity of the pldC gene with these two genes, the enzyme purified from E. coli overexpressing the pldC gene showed both protease I and thioesterase I activities.     

来源于瘤胃菌Ruminococcus sp.的D-阿洛酮糖3-差向异构酶的底物结合位点分析

【目的】研究来源于瘤胃菌Ruminococcus sp.的D-阿洛酮糖3-差向异构酶的底物结合机制。【方法】通过同源模拟和同源序列比对,筛选与其底物结合相关的关键位点,进而通过定点突变构建突变体并对其动力学性质进行研究。【结果】筛选得到关键位点Y6和A109,构建了突变体Y6F、Y6I、A109P及A109L。【结论】Y6既与底物结合又与催化能力相关,其-OH只与底物结合相关,芳香环则与催化能力和结合能力均相关;而A109则只是底物结合的位点。该研究结果为D-阿洛酮糖3-差向异构酶的催化机理研究及分子改造提供了借鉴。     

The crystal structure of polyhydroxybutyrate depolymerase from Penicillium funiculosum provides insights into the recognition and degradation of biopolyesters

Polyhydroxybutyrate is a microbial polyester that can be produced from renewable resources, and is degraded by the enzyme polyhydroxybutyrate depolymerase. The crystal structures of polyhydroxybutyrate depolymerase from Penicillium funiculosum and its S39 A mutant complexed with the methyl ester of a trimer substrate of (R)-3-hydroxybutyrate have been determined at resolutions of 1.71 A and 1.66 A, respectively. The enzyme is comprised of a single domain, which represents a circularly permuted variant of the alpha/beta hydrolase fold. The catalytic residues Ser39, Asp121, and His155 are located at topologically conserved positions. The main chain amide groups of Ser40 and Cys250 form an oxyanion hole. A crevice is formed on the surface of the enzyme, to which a single polymer chain can be bound by predominantly hydrophobic interactions with several hydrophobic residues. The structure of the S39A mutant-trimeric substrate complex reveals that Trp307 is responsible for the recognition of the ester group adjacent to the scissile group. It is also revealed that the substrate-binding site includes at least three, and possibly four, subsites for binding monomer units of polyester substrates. Thirteen hydrophobic residues, which are exposed to solvent, are aligned around the mouth of the crevice, forming a putative adsorption site for the polymer surface. These residues may contribute to the sufficient binding affinity of the enzyme for PHB granules without a distinct substrate-binding domain.     

Backbone dynamics of Escherichia coli thioesterase/protease I: evidence of a flexible active-site environment for a serine protease

Escherichia coli thioesterase/protease I (TEP-I) is a member of a novel subclass of the lipolytic enzymes with a distinctive GDSLS motif. In addition to possessing thioesterase and protease activities, TEP-I also exhibits arylesterase activity. We have determined the (15)N nuclear magnetic spin relaxation rates, R(1) and R(2), and the steady state (1)H-(15)N heteronuclear Overhauser effect, measured at both 11.74 T and 14.09 T, of (u-(15)N) TEP-I. These data were analyzed using model-free formalism (with axially symmetric rotational diffusion anisotropy) to extract the backbone dynamics of TEP-I. The results reveal that the core structure of the central beta-sheet and the long alpha-helices are rigid, while the binding pocket appears to be rather flexible. The rigid core serves as a scaffold to anchor the essential loops, which form the binding pocket. The most flexible residues display large amplitude fast (ps/ns time-scale) motion and lie on one stripe whose orientation is presumed to be the ligand-binding orientation. We also detected the presence of several residues displaying slow (microseconds/ms time-scale) conformational exchanging processes. These residues lie around the binding pocket and are oriented perpendicularly to the orientation of the flexible stripe. Two of the putative catalytic triads, Ser10 and His157, and their neighbors show motion on the microseconds/ms time-scale, suggesting that their slow motion may have a role in catalysis, in addition to their possible roles in ligand binding. The presence of a flexible substrate-binding pocket may also facilitate binding to a wide range of substrates and confer the versatile functional property of this protein.     

U2AF participates in the binding of TAP (NXF1) to mRNA.

TAP/NXF1 is a conserved mRNA export receptor serving as a link between messenger ribonucleoproteins (mRNPs) and the nuclear pore complex. The mechanism by which TAP recognizes its export substrate is unclear. We show here that TAP is added to spliced mRNP in human cells. We identified a distinct region of TAP that targets it to mRNP. Using yeast two-hybrid screens and in vitro binding studies, we found that this region coincides with a direct binding site for U2AF35, the small subunit of the splicing factor U2AF. This interaction is evolutionarily conserved across metazoa, indicating its significance. We further found in human cells that the exogenously expressed large U2AF subunit, U2AF65, accumulates in spliced mRNP, leading to the recruitment of U2AF35 and TAP. Similarly to TAP, U2AF65 stimulated directly the nuclear export and expression of an mRNA that is otherwise retained in the nucleus. Together with our finding that U2AF is continuously exported from the nucleus, these data suggest that U2AF participates in nuclear export, by facilitating TAP's addition to its mRNA substrates.     

Structural basis for the substrate specificity of a Bacillus 1,3-1,4-beta-glucanase

Depolymerization of polysaccharides is catalyzed by highly specific enzymes that promote hydrolysis of the scissile glycosidic bond by an activated water molecule. 1,3-1,4-beta-Glucanases selectively cleave beta-1,4 glycosidic bonds in 3-O-substituted glucopyranosyl units within polysaccharides with mixed linkage. The reaction follows a double-displacement mechanism by which the configuration of the anomeric C(1)-atom of the glucosyl unit in subsite -I is retained. Here we report the high-resolution crystal structure of the hybrid 1,3-1,4-beta-glucanase H(A16-M)(E105Q/E109Q) in complex with a beta-glucan tetrasaccharide. The structure shows four beta-d-glucosyl moieties bound to the substrate-binding cleft covering subsites -IV to -I, thus corresponding to the reaction product. The ten active-site residues Asn26, Glu63, Arg65, Phe92, Tyr94, Glu105, Asp107, Glu109, Asn182 and Trp184 form a network of hydrogen bonds and hydrophobic stacking interactions with the substrate. These residues were previously identified by mutational analysis as significant for stabilization of the enzyme-carbohydrate complex, with Glu105 and Glu109 being the catalytic residues. Compared to the Michaelis complex model, the tetrasaccharide moiety is slightly shifted toward that part of the cleft binding the non-reducing end of the substrate, but shows previously unanticipated strong stacking interactions with Phe92 in subsite -I. A number of specific hydrogen-bond contacts between the enzyme and the equatorial O(2), O(3) and O(6) hydroxyl groups of the glucosyl residues in subsites -I, -II and -III are the structural basis for the observed substrate specificity of 1,3-1,4-beta-glucanases. Kinetic analysis of enzyme variants with the all beta-1,3 linked polysaccharide laminarin identified key residues mediating substrate specificity in good agreement with the structural data. The comparison with structures of the apo-enzyme H(A16-M) and a covalent enzyme-inhibitor (E.I) complex, together with kinetic and mutagenesis data, yields new insights into the structural requirements for substrate binding and catalysis. A detailed view of enzyme-carbohydrate interactions is presented and mechanistic implications are discussed.     

Solution structures of the acyl carrier protein domain from the highly reducing type I iterative polyketide synthase CalE8

Biosynthesis of the enediyne natural product calicheamicins γ(1) (I) in Micromonospora echinospora ssp. calichensis is initiated by the iterative polyketide synthase (PKS) CalE8. Recent studies showed that CalE8 produces highly conjugated polyenes as potential biosynthetic intermediates and thus belongs to a family of highly-reducing (HR) type I iterative PKSs. We have determined the NMR structure of the ACP domain (meACP) of CalE8, which represents the first structure of a HR type I iterative PKS ACP domain. Featured by a distinct hydrophobic patch and a glutamate-residue rich acidic patch, meACP adopts a twisted three-helix bundle structure rather than the canonical four-helix bundle structure. The so-called 'recognition helix' (α2) of meACP is less negatively charged than the typical type II ACPs. Although loop-2 exhibits greater conformational mobility than other regions of the protein with a missing short helix that can be observed in most ACPs, two bulky non-polar residues (Met(992), Phe(996)) from loop-2 packed against the hydrophobic protein core seem to restrict large movement of the loop and impede the opening of the hydrophobic pocket for sequestering the acyl chains. NMR studies of the hydroxybutyryl- and octanoyl-meACP confirm that meACP is unable to sequester the hydrophobic chains in a well-defined central cavity. Instead, meACP seems to interact with the octanoyl tail through a distinct hydrophobic patch without involving large conformational change of loop-2. NMR titration study of the interaction between meACP and the cognate thioesterase partner CalE7 further suggests that their interaction is likely through the binding of CalE7 to the meACP-tethered polyene moiety rather than direct specific protein-protein interaction.     

Analysis of Mutations in the Copper B Binding Region Associated With Type I (Tyrosinase-Related) Oculocutaneous Albinism

Mutations of the tyrosinase gene are responsible for type I (tyrosinase-related) oculocutaneous albinism (OCA), an autosomal recessive genetic syndrome with a broad phenotypic spectrum. Mutant tyrosinase alleles can be associated with no melanin synthesis (I-A, tyrosinase-negative OCA), small to moderate amounts of melanin (I-B, yellow OCA) or unusual pigment patterns (I-TS, temperature-sensitive OCA). A total of 26 mutations of this gene have been described in type I OCA. Analysis of all known missense mutations (n = 17) shows that most cluster in three areas of the coding region. Two clusters involve the copper A or copper B binding sites and may disrupt the metal ion-protein interaction necessary for enzyme function and the third cluster is located in exon I. Computer modeling of the secondary structure of the copper binding regions based on homology with the known crystal structure of hemocyanin show that they both consist of two a helicies containing three histidine ligands that complex to a single copper atom. Mutations in the copper B binding region lie in the region between the two a helices that consists of a loop structure. These mutations may affect tyrosinase activity by either altering the position of the a helical domains and thus preventing proper copper binding to the histidine ligands, or affecting a catalytic or substrate binding site located between the two a helical domains.     

A dynamic loop provides dual control over the catalytic and membrane binding activity of a bacterial serine hydrolase

The bacterial acyl protein thioesterase (APT) homologue FTT258 from the gram-negative pathogen Francisella tularensis exists in equilibrium between a closed and open state. Interconversion between these two states is dependent on structural rearrangement of a dynamic loop overlapping its active site. The dynamics and structural properties of this loop provide a simple model for how the catalytic activity of FTT258 could be spatiotemporally regulated within the cell. Herein, we characterized the dual roles of this dynamic loop in controlling its catalytic and membrane binding activity. Using a comprehensive library of loop variants, we determined the relative importance of each residue in the loop to these two biological functions. For the catalytic activity, a centrally located tryptophan residue (Trp66) was essential, with the resulting alanine variant showing complete ablation of enzyme activity. Detailed analysis of Trp66 showed that its hydrophobicity in combination with spatial arrangement defined its essential role in catalysis. Substitution of other loop residues congregated along the N-terminal side of the loop also significantly impacted catalytic activity, indicating a critical role for this loop in controlling catalytic activity. For membrane binding, the centrally located hydrophobic residues played a surprising minor role in membrane binding. Instead general electrostatic interactions regulated membrane binding with positively charged residues bracketing the dynamic loop controlling membrane binding. Overall for FTT258, this dynamic loop dually controlled its biological activities through distinct residues within the loop and this regulation provides a new model for the spatiotemporal control over FTT258 and potentially homologous APT function.     

Crystal structures of Saccharomyces cerevisiae N-myristoyltransferase with bound myristoyl-CoA and inhibitors reveal the functional roles of the N-terminal region

Protein N-myristoylation catalyzed by myristoyl-CoA:protein N-myristoyltransferase (NMT) plays an important role in a variety of critical cellular processes and thus is an attractive target for development of antifungal drugs. We report here three crystal structures of Saccharomyces cerevisiae NMT: in binary complex with myristoyl-CoA (MYA) alone and in two ternary complexes involving MYA and two different non-peptidic inhibitors. In all three structures, the majority of the N-terminal region, absent in all previously reported structures, forms a well defined motif that is located in the vicinity of the peptide substrate-binding site and is involved in the binding of MYA. The Ab loop, which might be involved in substrate recognition, adopts an open conformation, whereas a loop of the N-terminal region (residues 22-24) that covers the top of the substrate-binding site is in the position occupied by the Ab loop when in the closed conformation. Structural comparisons with other NMTs, together with mutagenesis data, suggest that the N-terminal region of NMT plays an important role in the binding of both MYA and peptide substrate, but not in subsequent steps of the catalytic mechanism. The two inhibitors occupy the peptide substrate-binding site and interact with the protein through primarily hydrophobic contacts. Analyses of the inhibitorenzyme interactions provide valuable information for further improvement of antifungal inhibitors targeting NMT.     

Thioesterase activity and subcellular localization of acylprotein thioesterase 1/lysophospholipase 1

Acylprotein thioesterase 1 (APT1), also known as lysophospholipase 1, is an important enzyme responsible for depalmitoylation of palmitoyl proteins. To clarify the substrate selectivity and the intracellular function of APT1, we performed kinetic analyses and competition assays using a recombinant human APT1 (hAPT1) and investigated the subcellular localization. For this purpose, an assay for thioesterase activity against a synthetic palmitoyl peptide using liquid chromatography/mass spectrometry was established. The thioesterase activity of hAPT1 was most active at neutral pH, and did not require Ca²⁺ for its maximum activity. The K_M values for thioesterase and lysophospholipase (against lysophosphatidylcholine) activities were 3.49 and 27.3 μM, and the V_max values were 27.3 and 1.62 μmol/min/mg, respectively. Thus, hAPT1 revealed much higher thioesterase activity than lysophospholipase activity. One activity was competitively inhibited by another substrate in the presence of both substrates. Immunocytochemical and Western blot analyses revealed that endogenous and overexpressed hAPT1 were mainly localized in the cytosol, while some signals were detected in the plasma membrane, the nuclear membrane and ER in HEK293 cells. These results suggest that eliminating palmitoylated proteins and lysophospholipids from cytosol is one of the functions of hAPT1.     

Induced-fit upon ligand binding revealed by crystal structures of the hot-dog fold thioesterase in dynemicin biosynthesis

Dynemicins are structurally related 10-membered enediyne natural products isolated from Micromonospora chernisa with potent antitumor and antibiotic activity. The early biosynthetic steps of the enediyne moiety of dynemicins are catalyzed by an iterative polyketide synthase (DynE8) and a thioesterase (DynE7). Recent studies indicate that the function of DynE7 is to off-load the linear biosynthetic intermediate assembled on DynE8. Here, we report crystal structures of DynE7 in its free form at 2.7 Å resolution and of DynE7 in complex with the DynE8-produced all-trans pentadecen-2-one at 2.1 Å resolution. These crystal structures reveal that upon ligand binding, significant conformational changes throughout the substrate-binding tunnel result in an expanded tunnel that traverses an entire monomer of the tetrameric DynE7 protein. The enlarged inner segment of the channel binds the carbonyl-conjugated polyene mainly through hydrophobic interactions, whereas the putative catalytic residues are located in the outer segment of the channel. The crystallographic information reinforces an unusual catalytic mechanism that involves a strictly conserved arginine residue for this subfamily of hot-dog fold thioesterases, distinct from the typical mechanism for hot-dog fold thioesterases that utilizes an acidic residue for catalysis.     

耐热碱性磷酸酶突变体耐热性变化机理研究

从耐热碱性磷酸酶（TAP）200多个随机突变体的克隆库中选出耐热性明显下降的4株突变体,进行全序列及表达产物的最高耐受温度和最适反应温度测定和酶分子高级结构的模拟,分析突变位点、高级结构和耐热性表现三者的关系,探讨引起耐热性变化的机理。结构模拟显示所有突变位点都仅能引起细微的、局部的结构变化,除T320→I外都未直接触及酶的活性中心;结构上的细微改变虽然对最适反应温度影响不明显,但却使最高耐受温度降低了10℃左右;T320→I靠近酶的活性中心,尽管未能引起结构的较大变化,但却使最高耐受温度和最适反应温度同时显著降低。可见,多数点突变对高级结构的影响都不剧烈,但对耐热性尤其是最高耐受温度的影响却比较明显,一般地,在非活性区的突变通常只能引起最高耐受温度的降低,靠近活性区的突变则能同时引起最适反应温度和最高耐受温度的降低。     

Purification and Reconstitution of the Antigen Transport Complex TAP: A PREREQUISITE FOR DETERMINATION OF PEPTIDE STOICHIOMETRY AND ATP HYDROLYSIS*

The transporter associated with antigen processing (TAP) is an essential machine of the adaptive immune system that translocates antigenic peptides from the cytosol into the endoplasmic reticulum lumen for loading of major histocompatibility class I molecules. To examine this ABC transport complex in mechanistic detail, we have established, after extensive screening and optimization, the solubilization, purification, and reconstitution for TAP to preserve its function in each step. This allowed us to determine the substrate-binding stoichiometry of the TAP complex by fluorescence cross-correlation spectroscopy. In addition, the TAP complex shows strict coupling between peptide binding and ATP hydrolysis, revealing no basal ATPase activity in the absence of peptides. These results represent an optimal starting point for detailed mechanistic studies of the transport cycle of TAP by single molecule experiments to analyze single steps of peptide translocation and the stoichiometry between peptide transport and ATP hydrolysis.     

Catalytic site modifications of TAP1 and TAP2 and their functional consequences

The transporter associated with antigen processing (TAP), a member of the ATP binding cassette (ABC) family of transmembrane transporters, transports peptides across the endoplasmic reticulum membrane for assembly of major histocompatibility complex class I molecules. Two subunits, TAP1 and TAP2, are required for peptide transport, and ATP hydrolysis by TAP1.TAP2 complexes is important for transport activity. Two nucleotide binding sites are present in TAP1.TAP2 complexes. Compared with other ABC transporters, the first nucleotide binding site contains non-consensus catalytic site residues, including Asp(668) in the Walker B region of TAP1 (in place of a highly conserved glutamic acid), and Gln(701) in the switch region of TAP1 (in place of a highly conserved histidine). At the second nucleotide binding site, a glutamic acid (TAP2 Glu(632)) follows the Walker B motif, and the switch region contains a histidine (TAP2 His(661)). We found that alterations at Glu(632) and His(661) of TAP2 significantly reduced peptide translocation and/or TAP-induced major histocompatibility complex class I surface expression. Alterations of TAP1 Asp(668) alone or in combination with TAP1 Gln(701) had only small effects on TAP activity. Thus, the naturally occurring Asp(668) and Gln(701) alterations of TAP1 are likely to contribute to attenuated catalytic activity at the first nucleotide binding site (the TAP1 site) of TAP complexes. Due to its enhanced catalytic activity, the second nucleotide binding site (the TAP2 site) appears to be the main site driving peptide transport. A mechanistic model involving one main active site is likely to apply to other ABC transporters that have an asymmetric distribution of catalytic site residues within the two nucleotide binding sites.