Thermostabilization of Proteins by Diglycerol Phosphate, a New Compatible Solute from the Hyperthermophile Archaeoglobus fulgidus

Diglycerol phosphate accumulates under salt stress in the archaeon Archaeoglobus fulgidus (L. O. Martins, R. Huber, H. Huber, K. O. Stetter, M. S. da Costa, and H. Santos, Appl. Environ. Microbiol. 63:896–902, 1997). This solute was purified after extraction from the cell biomass. In addition, the optically active and the optically inactive (racemic) forms of the compound were synthesized, and the ability of the solute to act as a protecting agent against heating was tested on several proteins derived from mesophilic or hyperthermophilic sources. Diglycerol phosphate exerted a considerable stabilizing effect against heat inactivation of rabbit muscle lactate dehydrogenase, baker's yeast alcohol dehydrogenase, and Thermococcus litoralis glutamate dehydrogenase. Highly homologous and structurally well-characterized rubredoxins from Desulfovibrio gigas, Desulfovibrio desulfuricans (ATCC 27774), and Clostridium pasteurianum were also examined for their thermal stabilities in the presence or absence of diglycerol phosphate, glycerol, and inorganic phosphate. These proteins showed different intrinsic thermostabilities, with half-lives in the range of 30 to 100 min. Diglycerol phosphate exerted a strong protecting effect, with approximately a fourfold increase in the half-lives for the loss of the visible spectra of D. gigas and C. pasteurianum rubredoxins. In contrast, the stability of D. desulfuricans rubredoxin was not affected. These different behaviors are discussed in the light of the known structural features of rubredoxins. The data show that diglycerol phosphate is a potentially useful protein stabilizer in biotechnological applications.     

Structural determinants of protein stabilization by solutes. The important of the hairpin loop in rubredoxins

Despite their high sequence homology, rubredoxins from Desulfovibrio gigas and D. desulfuricans are stabilized to very different extents by compatible solutes such as diglycerol phosphate, the major osmolyte in the hyperthermophilic archaeon Archaeoglobus fulgidus[Lamosa P, Burke A, Peist R, Huber R, Liu M Y, Silva G, Rodrigues-Pousada C, LeGall J, Maycock C and Santos H (2000) Appl Environ Microbiol66, 1974-1979]. The principal structural difference between these two proteins is the absence of the hairpin loop in the rubredoxin from D. desulfuricans. Therefore, mutants of D. gigas rubredoxin bearing deletions in the loop region were constructed to investigate the importance of this structural feature on protein intrinsic stability, as well as on its capacity to undergo stabilization by compatible solutes. The three-dimensional structure of the mutant bearing the largest deletion, Delta17/29, was determined by 1H-NMR, demonstrating that, despite the drastic deletion, the main structural features were preserved. The dependence of the NH chemical shifts on temperature and solute concentration (diglycerol phosphate or mannosylglycerate) provide evidence of subtle conformational changes induced by the solute. The kinetic stability (as assessed from the absorption decay at 494 nm) of six mutant rubredoxins was determined at 90 degrees C and the stabilizing effect exerted by both solutes was assessed. The extent of protection conferred by each solute was highly dependent on the specific mutant examined: while the half-life for iron release in the wild-type D. gigas rubredoxin increased threefold in the presence of 0.1 M diglycerol phosphate, mutant Delta23/29 was destabilized. This study provides evidence for solute-induced compaction of the protein structure and occurrence of weak, specific interactions with the protein surface. The relevance of these findings to our understanding of the molecular basis for protein stabilization is discussed.     

The interaction of polymeric viologens with hydrogenases from Desulfovibrio desulfuricans and Clostridium pasteurianum.

The interaction between hydrogenases from either Desulfovibrio desulfuricans or Clostridium pasteurianum and electron donors methyl viologen or polymeric viologens was examined. Extracts from each organism contained a single gel electophoretic band of active hydrogenase. The hydrogenase of D. desulfuricans was much more stable than that of Cl. pasteurianum. With methyl viologen apparent Km and Vm values were 0.5 mM and 0.62 mumole H2/min per milligram protein for the Cl. pasteurianum and 0.7 and 6.2 mumole H2/min per milligram protein, respectively, for the D. desulfuricans enzyme. The hydrogenases bound the polymeric viologens more tightly than methyl viologen, more so for the enzyme of D. desulfuricans than for Cl. pasteurianum. Maximal rate of hydrogen production was less with the polymeric than with methyl viologen. The results suggest that the D. desulfuricans enzyme in conjunction wiion than that from Cl. pasteurianum.     

Protein stabilization by compatible solutes. Effect of diglycerol phosphate on the dynamics of Desulfovibrio gigas rubredoxin studied by NMR.

Heteronuclear NMR relaxation measurements and hydrogen exchange data have been used to characterize protein dynamics in the presence or absence of stabilizing solutes from hyperthermophiles. Rubredoxin from Desulfovibrio gigas was selected as a model protein and the effect of diglycerol phosphate on its dynamic behaviour was studied. The presence of 100 mM diglycerol phosphate induces a fourfold increase in the half-life for thermal denaturation of D. gigas rubredoxin. A model-free analysis of the protein backbone relaxation parameters shows an average increase of generalized order parameters of 0.015 reflecting a small overall reduction in mobility of fast-scale motions. Hydrogen exchange data acquired over a temperature span of 20 degrees C yielded thermodynamic parameters for the structural opening reactions that allow for the exchange. This shows that the closed form of the protein is stabilized by an additional 1.6 kJ x mol(-1) in the presence of the solute. The results seem to indicate that the stabilizing effect is due mainly to a reduction in mobility of the slower, larger-scale motions within the protein structure with an associated increase in the enthalpy of interactions.     

Purification and characterization of cytochrome c3, ferredoxin, and rubredoxin isolated from Desulfovibrio desulfuricans Norway.

Different electron carriers of the non-desulfoviridin-containing, sulfate-reducing bacterium Desulfovibrio desulfuricans (Norway strain) have been studied. Two nonheme iron proteins, ferredoxin and rubredoxin, have been purified. This ferredoxin contains four atoms of non-heme iron and acid-labile sulfur and six residues of cysteine per molecule. Its amino acid composition suggests that it is homologous with the other Desulfovibrio ferredoxins. The rubredoxin is also an acidic protein of 6,000 molecular weight and contains one atom of iron and four cysteine residues per molecule. The amino acid composition and molecular weight of the cytochrome c3 from D. desulfuricans (strain Norway 4) are reported. Its spectral properties are very similar to those of the other cytochromes c3 (molecular weight, 13,000) of Desulfovibrio and show that it contains four hemes per molecule. This cytochrome has a very low redox potential and acts as a carrier in the coupling of hydrogenase and thiosulfate reductase in extracts of Desulfovibrio gigas and Desulfovibrio desulfuricans (Norway strain) in contrast to D. gigas cytochrome c3 (molecular weight, 13,000). A comparison of the activities of the cytochrome c3 (molecular weight, 13,000) of D. gigas and that of D. desulfuricans in this reaction suggests that these homologous proteins can have different specificity in the electron transfer chain of these bacteria.     

Protein contributions to redox potentials of homologous rubredoxins: an energy minimization study.

The energetic contributions of the protein to the redox potential in an iron-sulfur protein are studied via energy minimization, comparing homologous rubredoxins from Clostridium pasteurianum, Desulfovibrio gigas, Desulfovibrio vulgaris, and Pyrococcus furiosus. The reduction reaction was divided into 1) the change in the redox site charge without allowing the protein to respond and 2) the relaxation of the protein in response to the new charge state, focusing on the latter. The energy minimizations predict structural relaxation near the redox site that agrees well with that in crystal structures of oxidized and reduced P. furiosus rubredoxin, but underpredicts it far from the redox site. However, the relaxation energies from the energy-minimized structures agree well with those from the crystal structures, because the polar groups near the redox site are the main determinants and the charged groups are all located at the surface and thus are screened dielectrically. Relaxation energies are necessary for good agreement with experimentally observed differences in reduction energies between C. pasteurianum and the other three rubredoxins. Overall, the relaxation energy is large (over 500 mV) from both the energy-minimized and the crystal structures. In addition, the range in the relaxation energy for the different rubredoxins is large (300 mV), because even though the structural perturbations of the polar groups are small, they are very near the redox site. Thus the relaxation energy is an important factor to consider in reduction energetics.     

NMR structure of Desulfovibrio gigas rubredoxin: a model for studying protein stabilization by compatible solutes

Rubredoxins are small, soluble proteins that display a wide variation in thermostability, despite having a high degree of sequence similarity They also vary in the extent to which they are stabilized by solutes such as diglycerol phosphate. Hence, they provide excellent models for studying the mechanisms of thermostabilization. Nuclear magnetic resonance (NMR) spectroscopy can be used to investigate interactions between molecules, as well as subtle changes in conformation in solution, and also provides a means to measure protein stability. The assignment of the proton NMR spectrum of the zinc rubredoxin from Desulfovibrio gigas is presented, together with its structure in solution. The stabilizing effect of diglycerol phosphate on rubredoxin is demonstrated and assessed by determining selected amide proton exchange rates; diglycerol phosphate at 100 mM concentration caused an additional structural stabilization of 1.2 +/-0.4 kJ/mol. The pattern of effects on the exchange rates is discussed in relation to the protein structure.     

Comparative study of the thermostabilizing properties of mannosylglycerate and other compatible solutes on model enzymes

The protection of mannosylglycerate, at 0.5 M concentration, against heat inactivation of the model enzyme lactate dehydrogenase (LDH) was compared to that exerted by other compatible solutes, namely, trehalose, ectoine, hydroxyectoine, di- myo-inositol phosphate, diglycerol phosphate, and mannosylglyceramide. Mannosylglycerate and hydroxyectoine were the best stabilizers of the enzyme and showed comparable protective effects. Diglycerol phosphate, trehalose, and mannosylglyceramide protected the enzyme to a lower extent. Ectoine conferred no protection, and di- myo-inositol phosphate had a strong destabilizing effect. The superior ability of mannosylglycerate to prevent LDH inactivation was accompanied by a higher efficiency in preventing LDH aggregation induced by heat stress. Moreover, mannosylglycerate induced an increase of 4.5 degrees C in the melting temperature of LDH, whereas the same molar concentration of trehalose caused an increase of only 2.2 degrees C. The effectiveness of mannosylglycerate in protecting LDH was also compared to that of other chemically related compounds: mannose, methyl-mannoside, potassium glycerate, glucosylglycerol, glycerol, and glucose. Mannosylglycerate conferred the highest protection, but glucosylglycerol and potassium glycerate were very efficient; glucose exerted a low degree of protection, glycerol and methyl-mannoside had no significant effect, and mannose caused destabilization. Mannosylglycerate was also a good thermoprotectant of glucose oxidase from Aspergillus niger, an enzyme with a net charge opposite to that of LDH under the working conditions. Given the superior performance of mannosylglycerate as a thermoprotectant of enzyme activity in vitro, it is conceivable that it also fulfills a protein thermoprotective function in vivo.     

Rubredoxin from Desulfovibrio gigas. A molecular model of the oxidized form at 1.4 A resolution

The crystal structure of rubredoxin from the sulfate-reducing bacterium Desulfovibrio gigas has been determined at 1.4 A resolution (1 A = 0.1 nm) by X-ray diffraction methods; starting with a model of the isostructural rubredoxin from Desulfovibrio vulgaris. Refinement of the molecular model has been carried out by restrained least-squares techniques and Fourier series calculations. The present model includes a formyl at the N-terminal end and 121 possible sites for solvent molecules with full or partial occupancy, which corresponds to the modeling of nearly all the solvent medium. The crystallographic R factor against the data with 10 A greater than d greater than 1.4 A with F greater than 2 sig(F), is 0.136; and R = 0.140 when all the data are considered. The estimated average root-mean-square (r.m.s.) error on the positional parameters is about 0.12 A. The overall structural features of this molecule are close to those of the two highly refined rubredoxins from Clostridium pasteurianum and D. vulgaris. Superposition of these two molecules on the rubredoxin from D. gigas shows in both cases an overall r.m.s. deviation of 0.5 A for the atoms in the main-chain and of 0.4 A for the atoms in the side-chains that make up the hydrophobic core. The iron atom is co-ordinated to four cysteine sulfur atoms forming an almost regular tetrahedron, with Fe-SG distances ranging from 2.27 A to 2.31 A and angles varying from 103 degrees to 115 degrees. The intramolecular hydrogen-bonding pattern is quite comparable to those found in other proteins refined at high resolution. All the polar groups are involved in hydrogen bonds: intramolecular, intermolecular or with solvent molecules. The main structural differences from the other rubredoxins are in the nature and the distribution of some of the charged residues over the molecular surface. The possible influence of several structural factors on the intramolecular and intermolecular electron transfer properties such as the NH...SG bonds, the solvent exposure of the redox center, and the aromatic core is discussed. The conservation, during evolution, of a ring of acidic residues in the proximity of the FeSG4 center suggests that this ring may be implicated in the recognition processes between rubredoxins and their functional partners.     

Diversity and origin of Desulfovibrio species: phylogenetic definition of a family

The different nutritional properties of several Desulfovibrio desulfuricans strains suggest that either the strains are misclassified or there is a high degree of phenotypic diversity within the genus Desulfovibrio. The results of partial 16S rRNA and 23S rRNA sequence determinations demonstrated that Desulfovibrio desulfuricans ATCC 27774 and "Desulfovibrio multispirans" are closely related to the type strain (strain Essex 6) and that strains ATCC 7757, Norway 4, and El Agheila Z are not. Therefore, these latter three strains of Desulfovibrio desulfuricans are apparently misclassified. A comparative analysis of nearly complete 16S rRNA sequences in which we used a least-squares analysis method for evolutionary distances, an unweighted pair group method, a signature analysis method, and maximum parsimony was undertaken to further investigate the phylogeny of Desulfovibrio species. The species analyzed were resolved into two branches with origins deep within the delta subdivision of the purple photosynthetic bacteria. One branch contained five deep lineages, which were represented by (i) Desulfovibrio salexigens and Desulfovibrio desulfuricans El Agheila Z; (ii) Desulfovibrio africanus; (iii) Desulfovibrio desulfuricans ATCC 27774, Desulfomonas pigra, and Desulfovibrio vulgaris; (iv) Desulfovibrio gigas; and (v) Desulfomicrobium baculatus (Desulfovibrio baculatus) and Desulfovibrio desulfuricans Norway 4. A correlation between 16S rRNA sequence similarity and percentage of DNA relatedness showed that these five deep lineages are related at levels below the minimum genus level suggested by Johnson (in Bergey's Manual of Systematic Bacteriology, vol. 1, 1984). We propose that this branch should be grouped into a single family, the Desulfovibrionaceae. The other branch includes other genera of sulfate-reducing bacteria (e.g., Desulfobacter and Desulfococcus) and contains Desulfovibrio sapovorans and Desulfovibrio baarsii as separate, distantly related lineages.     

Light induced H2 evolution in a hydrogenase-TiO2 particle system by direct electron transfer or via rhodium complexes

Three different hydrogenases (isolated from Clostridium pasteurianum, Desulfovibrio desulfuricans strain Norway 4 and D. baculatus 9974) added to a suspension of TiO2 (anatase) powder are able to catalyze H2 evolution under band gap illumination of the semiconducting particles, and in the presence of EDTA or methanol as electron donor. This H2 production can be obtained by the direct electron transfer from the conduction band of the TiO2 particles to the active site of the enzyme at pHs higher than 7. This mediator-independent charge transfer is more efficient with C. pasteurianum and D. baculatus 9974 hydrogenases, and in the presence of methanol. Rhodium tris- and bis-bipyridyl complexes can act efficiently as electron carriers from the supporting particles to the adsorbed enzyme molecules in cases where the direct transfer is inefficient.     

Structure and mechanism of iron-only hydrogenases

The recent elucidation of the structures of iron-only hydrogenases from the microorganisms Clostridium pasteurianum and Desulfovibrio desulfuricans has revealed that the presumed site of reversible hydrogen oxidation exists as a unique, protein-associated organometallic prosthetic group. Details of the hydrogenase structures provide insight into the chemical mechanism of this highly evolved catalyst.     

Gene sequence and the 1.8 A crystal structure of the tungsten-containing formate dehydrogenase from Desulfovibrio gigas

Desulfovibrio gigas formate dehydrogenase is the first representative of a tungsten-containing enzyme from a mesophile that has been structurally characterized. It is a heterodimer of 110 and 24 kDa subunits. The large subunit, homologous to E. coli FDH-H and to D. desulfuricans nitrate reductase, harbors the W site and one [4Fe-4S] center. No small subunit ortholog containing three [4Fe-4S] clusters has been reported. The structural homology with E. coli FDH-H shows that the essential residues (SeCys158, His159, and Arg407) at the active site are conserved. The active site is accessible via a positively charged tunnel, while product release may be facilitated, for H(+) by buried waters and protonable amino acids and for CO(2) through a hydrophobic channel.     

Hydrogen metabolism in Desulfovibrio desulfuricans strain New Jersey (NCIMB 8313)--comparative study with D. vulgaris and D. gigas species

This article aims to study hydrogen production/consumption in Desulfovibrio (D.) desulfuricans strain New Jersey, a sulfate reducer isolated from a medium undergoing active biocorrosion and to compare its hydrogen metabolism with two other Desulfovibrio species, D. gigas and D. vulgaris Hildenborough. Hydrogen production was followed during the growth of these three bacterial species under different growth conditions: no limitation of sulfate and lactate, sulfate limitation, lactate limitation, pyruvate/sulfate medium and in the presence of molybdate. Hydrogen production/consumption by D. desulfuricans shows a behavior similar to that of D. gigas but a different one from that of D. vulgaris, which produces higher quantities of hydrogen on lactate/sulfate medium. The three species are able to increase the hydrogen production when the sulfate became limiting. Moreover, in a pyruvate/sulfate medium hydrogen production was lower than on lactate/sulfate medium. Hydrogen production by D. desulfuricans in presence of molybdate is extremely high. Hydrogenases are key enzymes on production/consumption of hydrogen in sulfate reducing organisms. The specific activity, number and cellular localization of hydrogenases vary within the three Desulfovibrio species used in this work, which could explain the differences observed on hydrogen utilization.     

Periplasmic superoxide dismutase from Desulfovibrio desulfuricans 1388 is an iron protein

It is shown that the genome of the sulfate-reducing bacterium Desulfovibrio desulfuricans 1388 contains a superoxide dismutase (SOD) gene (sod). The gene encodes an export signal peptide characteristic for periplasmic redox proteins. The amino acid sequence showed high homology with iron-containing SODs from other bacteria. Electrophoretically pure SOD was isolated from the periplasmic fraction of bacterial cells by FPLC chromatography. Like other Fe-SODs, D. desulfuricans 1388 superoxide dismutase is inhibited by H2O2 and azide, but not by cyanide.     

Phylogenetic studies of two rubredoxins from sulfate reducing bacteria

Summary The sequences of two rubredoxins isolated from the sulfate reducing bacteria:Desulfovibrio vulgaris andDesulfovibrio gigas have been elucidated. They have similar sequences but many more differences occur than would be expected from two bacteria of the same genus. Of the 52 sites, only 37 are occupied by identical residues. The primary structures are compared with those of the anaerobic bacteria rubredoxins ofClostridium pasteurianum, Micrococcus aerogenes, Pseudomonas oleovorans andPeptostreptococcus elsdenii: only 12 identities are found, mostly in the two clusters that contain two iron-bound cysteines each. A phylogenetic tree based on the primary structures is presented and possible relations with plant and bacterial ferredoxins are discussed. A secondary and tertiary structure, stereochemically compatible with the sequence data, is proposed.To whom reprint requests should be addressed     

A four-iron ferredoxin from Desulfovibrio desulfuricans (Short Communication)

Ferredoxin from Desulfovibrio desulfuricans was isolated, purified and crystallized. It contains four iron atoms and four sulphido or ;acid-labile' sulphur atoms for a molecule of 6000 daltons. The absorption spectrum in the u.v.-visible region and the electron-paramagnetic-resonance signals of the reduced protein are similar to those observed for other four-iron ferredoxins. The amino acid composition is different from that of Desulfovibrio gigas ferredoxin. The redox potential of -0.33V at pH7.0 was determined by dye techniques.     

Microcalorimetric studies of the growth of sulfate-reducing bacteria: comparison of the growth parameters of some Desulfovibrio species.

We performed a comparative study of the growth energetics of some species of Desulfovibrio by measuring microcalorimetric and molar growth yield values. Lactate and pyruvate were used as energy sources for sulfate reduction. On lactate-sulfate media Desulfovibrio desulfuricans Norway, Desulfovibrio gigas, and Desulfovibrio africanus exhibited molar growth yields of 4.1 +/- 0.6, 3.7 +/- 1.7, and 1.8 +/- 0.1 g/mol, respectively, whereas on pyruvate-sulfate media the molar growth yields were higher (8.5 +/- 0.8, 7.7 +/- 1.6, and 3.5 +/- 0.5 g/mol, respectively). Thus, we found that D. africanus was the least efficient species in converting energy into cell material. The uncoupling of energy in this strain was obvious since its catabolic activities were high compared with those of the two other strains. The enthalpy changes associated with lactate and pyruvate metabolism were -49 +/- 0.7 and -70.2 +/- 6.0 jK/mol, respectively, for D. desulfuricans, -76.6 +/- 1.8 and -91.2 +/- 1.1 kJ/mol, respectively, for D. gigas, and -78.8 +/- 7.2 and -88.0 +/- 6.2 kJ/mol, respectively, for D. africanus. D. gigas and D. africanus produced only acetate, CO2 and hydrogen sulfide as metabolic end products. In addition to these normal end products, D. desulfuricans Norway produced a small amount of butanol. This butanol production was interpreted as reflecting a regulatory system of electron flow during the catabolism of both substrates. Such metabolism was comparable to that reported for D. vulgaris, which lost part of the reducing power of its energy sources through hydrogen evolution.     

A novel parameterization scheme for energy equations and its use to calculate the structure of protein molecules

A novel scheme for the parameterization of a type of “potential energy” function for protein molecules is introduced. The function is parameterized based on the known conformations of previously determined protein structures and their sequence similarity to a molecule whose conformation is to be calculated. Once parameterized, minima of the potential energy function can be located using a version of simulated annealing which has been previously shown to locate global and near-global minima with the given functional form. As a test problem, the potential was parameterized based on the known structures of the rubredoxins from Desulfovibrio vulgaris, Desulfovibrio desulfuricans, and Clostridium pasteurianum, which vary from 45 to 54 amino acids in length, and the sequence alignments of these molecules with the rubredoxin sequence from Desulfovibrio gigas. Since the Desulfovibrio gigas rubredeoxin conformation has also been determined, it is possible to check the accuracy of the results. Ten simulated-annealing runs from random starting conformations were performed. Seven of the 10 resultant conformations have an all-C_α rms deviation from the crystallographically determined conformation of less than 1.7 Å. For five of the structures, the rms deviation is less than 0.8 Å. Four of the structures have conformations which are virtually identical to each other except for the position of the carboxy-terminal residue. This is also the conformation which is achieved if the determined crystal structure is minimized with the same potential. The all-C_α rms difference between the crystal and minimized crystal structures is 0.6 Å. It is further observed that the “energies” of the structures according to the potential function exhibit a strong correlation with rms deviation from the native structure. The conformations of the individual model structures and the computational aspects of the modeling procedure are discussed. © 1993 Wiley-Liss, Inc.