Heat shock induction of intranuclear actin rods in cultured mammalian cells

Incubation of cultured cells of mouse C3H-2K fibroblastic cell line and other mammalian cell lines at 42.0-43.0 degrees C for 30 min or longer caused disintegration of normal actin structures including stress fibers, and induced formation of intranuclear actin paracrystal-like structures, called actin rods. When cells exposed to the elevated temperatures were shifted back to 37 degrees C, normal actin structures were regained. Pretreatment of cells at moderately high temperatures such as 38.5 degrees C inhibited formation of the actin rods upon subsequent exposure to 42.0 degrees C. Neither microtubules nor intermediate filaments were disrupted by the heat treatment. Several heat shock proteins were found to be synthesized under the conditions where actin rods were induced. However, there is no causal relationship between two cellular events, the induction of intranuclear actin rods and the synthesis of heat shock proteins.     

Association of rapidly-labelled RNAs with actin in nuclear matrix from mouse L5178Y cells

More than 90% of rapidly-labelled nuclear RNA was associated with a nuclear matrix prepared from mouse leukemia L5178Y cells. The binding was not affected with up to 4 M NaCl; however, these RNAs were released from the nuclear matrix by treatment with a low ionic strength buffer (5 mM Tris-HCl buffer, pH 7.5, containing 1 mM ATP, 1 mM dithiothreitol, 0.2 mM ethylenediaminetetraacetic acid (EDTA) and 0.4 mM calcium chloride), without destruction of the sphere of the nuclear matrix. Actin filaments in the nuclear matrix were depolymerized with this buffer accompanied with rapidly-labelled RNAs. When the depolymerization was inhibited by slight modifications of the low ionic strength buffer (replacement of ATP by the same concentration of GTP; replacement of calcium ion by the same concentration of magnesium ion; addition of 20 micrograms/ml of phalloidine, which is a specific inhibitor of actin depolymerization), the release of rapidly-labelled RNAs from the nuclear matrix was also inhibited. The complex containing rapidly-labelled RNAs and matrix proteins was solubilized by a sonication from the nuclear matrix, and subjected to cesium chloride equilibrium centrifugation. Rapidly-labelled RNAs were concentrated on the bottom of the gradient accompanied with a small number of proteins (68K, 60K, 43K and 40K). The 43K protein was identified as actin by immunoblotting. By RNase digestion before equilibrium centrifugation, actin in the bottom fractions disappeared. These results suggest that rapidly-labelled RNAs anchor on the actin filaments in the nuclear matrix.     

The KKRKK sequence is involved in heat shock-induced nuclear translocation of the 18-kDa actin-binding protein, cofilin.

The exposure of cultured mammalian cells to elevated temperatures induces the translocation of actin and cofilin into the nuclei and the formation of intranuclear bundles of actin filaments decorated by cofilin (actin/cofilin rods). Cofilin has a stretch of five basic amino acids, KKRKK, which was assumed to be the sequence involved in the heat shock-dependent accumulation of cofilin in nuclei. To examine this possibility, the site-directed mutagenesis technique was employed to alter the KKRKK sequence of cofilin to KTLKK and the mutated cofilin was expressed under the human beta-actin promoter in transfectants of mouse C3H-2K cell line. All the recombinants derived from porcine cofilin cDNA were constructed so as to possess an extra-nonapeptide at their N-termini when expressed; their intracellular distribution could, therefore, be discriminated from that of endogenous cofilin using the indirect immunofluorescence method with polyclonal antibodies directed against the extra-peptide. The results clearly showed that the mutated cofilin possessing KTLKK instead of KKRKK did not translocate into the nuclei in response to heat shock whereas a recombinant cofilin with the unaltered sequence of KKRKK responded to heat shock and formed intranuclear rods together with actin. Although in vitro actin binding experiments showed that KTLKK-cofilin has a weaker affinity to actin filaments than KKRKK-cofilin, KTLKK-cofilin was found to form cytoplasmic actin/cofilin rods when transformants were incubated in NaCl buffer. Furthermore, we have noted that endogenous cofilin present in cells expressing KTLKK-cofilin behaved normally, translocated into nuclei and formed intranuclear actin/cofilin rods upon heat shock. These results suggest that the KKRKK sequence of cofilin functions as a nuclear location signal upon heat shock.     

The modifications of the final stages of the complement reaction by alkali metal cations.

We studied the effects of alkali metal cations on the terminal stages of complement lysis of human and sheep HK erythrocytes. Sensitized erythrocytes (EA) were reacted with limited amounts of complement for 1 hr at 37 degrees C in buffer containing 147 mM NaCl (Na buffer), which resulted in 10-40% lysis. The unlysed cells were washed with Na buffer at 0-2 degrees C and incubated for 1 hr at 37 degrees C in buffers containing 147 mM of the various alkali metal cations. Although additional lysis (25 to 65%) occurred with K, Rb, or Cs buffer, only minor degrees developed with Na or Li buffer, only minor degrees developed with Na or Li buffer. Intermediate levels occurred with 100 mM of the divalent alkali cations. Halogen ions and SCN-(147 MM), Ca++ (0.15mM), and Mg++ (0.5 mM) did not alter the effect of the alkali metal cations. Lysis occurring in K+, Rb+ or Cs+ proceeded without lag, was temperature dependent with an optimum of 43 degrees C, and had a pH optimum of 6.5. Lysis in K and Na buffers was unaffected by 10(-3) to 10(-5) M ouabain. Experiments with mixtures of cations indicated that Na+ had a mild inhibitory effect that could be totally overcome by K+, partially by Rb+, and not at all by Cs+. Li+ had a strong inhibitory effect, 6 X 10(-5) M causing 50% inhibition in buffers containing 147 mM K+, Rb+, or Cs+. By using intermediate complexes of EA and purified complement components we demonstrated that K+ enhances the lytic action of C8 on EAC1-7 as well as that of C9 on EAC1-8. It was known that Li+ facilitates lysis when acting on the entire complement reaction. We found that Li+ enhanced the lytic action of C8 on EAC1-7, with a kinetic that differed from that of the K+ effect. In addition, Li+ inhibited the enhancing effect of K+ upon lysis of EAC1-8 by C9. This occurred at concentration of Li+ similar to those which inhibited the additional lysis by K+, Rb+, and Cs+ of cells that were pretreated in Na buffer with the entire complement sequence. We propose that the major effects of alkali metal cations on complement lysis are due to their interaction with C8 and/or membrane constitutes.     

Polymerization of actin induced by a molar excess of ATP in a low salt buffer

The polymerization of actin induced by dilution has previously been reported, where a 1000-fold molar excess of ATP over actin resulted when actin was diluted to 4.0 microg/ml in low salt buffer A (0.1 mM ATP, 0.1 mM CaCl2, 2 mM Tris-HCl, pH 8.0, 5 mM 2-mercaptoethanol, 1 mM NaN3). Filaments formed by the addition of ATP to a 1000-fold molar excess over actin in buffer B (0.1 mM CaCl2, 2 mM Tris-HCl, pH 8.0, 1 mM NaN3) were then separated by gel-filtration. When ATP was removed from these filaments using Dowex-1, depolymerization occurred. Thus, the reversible polymerization induced by the dilution of actin or by addition of ATP can be ascribed to the binding of ATP at the low affinity site of actin.     

Polymerization of actin induced by a molar excess of ATP in a low salt buffer.

The polymerization of actin induced by dilution has previously been reported, where a 1000-fold molar excess of ATP over actin resulted when actin was diluted to 4.0 micrograms/ml in low salt buffer A (0.1 mM ATP, 0.1 mM CaCl2, 2 mM Tris-HCl, pH 8.0, 5 mM 2-mercaptoethanol, 1 mM NaN3). Filaments formed by the addition of ATP to a 1000-fold molar excess over actin in buffer B (0.1 mM CaCl2, 2 mM Tris-HCl, pH 8.0, 1 mM NaN3) were then separated by gel-filtration. When ATP was removed from these filaments using Dowex-1, depolymerization occurred. Thus, the reversible polymerization induced by the dilution of actin or by addition of ATP can be ascribed to the binding of ATP at the low affinity site of actin.     

Improved immunoelectron microscopic method for localizing cytoskeletal proteins in Lowicryl K4M embedded tissues

We have modified the Lowicryl K4M low-temperature dehydration and embedding procedure for immunoelectron microscopy to provide improved ultrastructural detail and facilitate the localization of actin and tubulin in isolated rat adrenocortical cells, chick spinal cord with attached dorsal root ganglia (SC-DRG), and cultured dorsal root ganglia (DRG). Cells and tissues were fixed for immunocytochemistry either in a mixture of 2% paraformaldehyde and 0.25% glutaraldehyde (0.1 M PIPES buffer, pH 7.3) or in a mixture of 0.3% glutaraldehyde and 1.0% ethyldimethylaminopropylcarbodiimide (0.1 M phosphate buffered saline, pH 7.3). Dehydration was in ethanol at progressively lower temperatures to -35 degrees C. Infiltration at -35 degrees C was followed by ultraviolet polymerization at -20 degrees C. Comparable samples were fixed in glutaraldehyde and osmium tetroxide and embedded in Epon 812 or Epon-Araldite. Post-embedding immunostaining of thin sections utilized commercially available monoclonal antibodies to tubulin and actin followed by the protein A-gold technique (Roth et al., Endocrinology 108:247, 1981). Actin immunoreactivity was observed at the periphery of mitochondria and between mitochondria and lipid droplets in rat adrenocortical cells and at the periphery of neuronal cell processes of SC-DRG. Tubulin immunoreactivity was associated with microtubules throughout neurites of cultured DRG. Our modified technique allows preservation of ultrastructural details as well as localization of antigens by immunoelectron microscopy.     

Changes in K+,Na+-sensitive actin gelation factor during the differentiation of myeloid leukemia cells

A homodimer protein consisting of two 38,000 dalton peptides was isolated from a murine leukemia cell line (M1). The binding molar ratio of the 38K-dimer protein to purified skeletal muscle actin was saturated at 1:3, and when the 38K-dimer/actin ratio exceeded 1:12, gelation occurred. This gelation was completely inhibited by the presence of either 10 mM KCl or 20 mM NaCl. The protein induced actin filament bundling, which required a higher 38K-dimer/actin ratio and was not affected by the presence of monovalent cations. During the differentiation of Ml cells, the sensitivity of the 38K protein to monovalent cations was decreased; that is 20 mM KCl or 50 mM NaCl was required to inhibit the gelation by the 38K protein isolated from differentiated cells. On the other hand, the intracellular K+ content of Ml cells decreased from 70 +/- 5 mM to 18 +/- 3 mM, and Na+ increased from 10 +/- 5 mM to 40 +/- 10 mM during the differentiation. These findings suggest that the differentiation brought about conditions favourable for the 38K protein to induce actin gelation, and in turn, the locomotive and phagocytic activities which were induced only after differentiation in this cell line.     

Dephosphorylation of cofilin accompanies heat shock-induced nuclear accumulation of cofilin

Cofilin is a widely distributed 21-kDa actin-modulating protein that forms intranuclear actin/cofilin rods in cultured fibroblastic cells exposed to heat shock or 10% dimethyl sulfoxide. In this study, cofilin was shown to be phosphorylated on a serine residue in cultured rat fibroblastic 3Y1 cells. Two-dimensional gel electrophoresis revealed that about 50% of the cofilin was phosphorylated in 3Y1 cells at 37 degrees C. Exposure of the cells to heat shock at 43 degrees C induced dephosphorylation of cofilin. The dephosphorylation of cofilin was detected about 30 min after the temperature shift and was completed within 120 min. Moreover, treatment of cells with 10% dimethyl sulfoxide also caused the dephosphorylation of cofilin. However, incubation of the cells with an isotonic NaCl solution, which induced cytoplasmic actin/cofilin rods, did not induce dephosphorylation of cofilin. Other cellular stress agents such as 6% ethanol or 50 microM sodium arsenite, which caused some heat shock responses in cells, did not induce dephosphorylation of cofilin. Thus, cofilin dephosphorylation was closely correlated with its nuclear accumulation. Incubation of the enucleated 3Y1 cells at 43 degrees C still induced dephosphorylation of cofilin, suggesting that the dephosphorylation occurred mostly in the cytoplasm in intact cells. It is likely that cofilin is dephosphorylated in the cytoplasm prior to its nuclear accumulation.     

Isolation of lectins from hemolymph of decapod crustaceans by adsorption on formalinized erythrocytes

Hemolymph of decapod crustaceans contains lectins of important specificity. An isolation procedure, based on adsorption of hemolymph lectins on red blood cells (RBC) fixed with formaldehyde, is described. Hemolymph is let to clot for 3 h at 22-28 degrees C (RT) and for 24 h at 5 degrees C; centrifuged at 13000 g for 30 min; filtered through 5-microm filters; diluted with an equal volume of 50 mM NaCl, 100 mM CaCl(2); supplemented with protease as well as phenoloxidase inhibitors; centrifuged at 13000 g for 20 min. Formalinized RBC (FRBC) are mixed with diluted hemolymph to a suspension of about 20% v/v FRBC. After incubation for 30 min at RT, FRBC are washed five times with 150 mM NaCl, 10 mM CaCl(2). The lectins adsorbed on FRBC are desorbed using either 100-500 mM of carbohydrate solutions in 0.9% NaCl or 50 mM Tris-HCl buffer, pH 8.0 containing 100 mM NaCl and 20 mM entylenediaminetetraacetate (EDTA). The procedure is efficient in isolating the hemolymph lectins of the decapods Liocarcinus depurator and Potamon potamios.     

Conformational stability of the myosin rod

Chymotryptic cleavage patterns of myosin rods from pig stomach, chicken gizzard, and rabbit skeletal muscle indicate that short (approximately 45 nm) heavy meromyosin subfragment 2 (SF2) is a consistent product of all three rods, whereas long (approximately 60 nm) SF2 is derived only from skeletal muscle myosin. Differential scanning calorimetry was used to follow the thermally induced melting transition of the rods and certain of their subfragments. In 0.12 M KCl, sodium phosphate buffer, pH 6.2-7.6, the light meromyosin (LMM) and SF2 domains of each rod had essentially identical conformational stabilities. Temperature midpoints for the melting transitions were 54-56 degrees C for the two smooth muscle myosin rods and 50-53 degrees C for the skeletal muscle myosin rod. In 0.6 M K Cl buffer, melting transitions for the smooth muscle myosin rods were essentially unchanged, but skeletal muscle myosin rods showed multiphase melting, with major transitions at 43 degrees C and 52 degrees C. The first of these was tentatively attributed to LMM, and the second to SF2. In 0.12 M K Cl buffer, the LMM transition was stabilised so that it superimposed on that of SF2. No melting was observed in any of the rods at physiological temperature. These results indicate that, excluding a possible but only narrow hinge region, the entire myosin rod has essentially uniform conformational stability at physiological pH and ionic strength, and thus that the contractile and elastic properties of the cross-bridge exist in the heavy meromyosin subfragment 1 (SF1) domains of the molecule.     

A novel ribonuclease with antiproliferative activity from fresh fruiting bodies of the edible mushroom Hypsizigus marmoreus

An 18-kDa ribonuclease (RNase) with a novel N-terminal sequence was purified from fresh fruiting bodies of the mushroom Hypsizigus marmoreus. The purification protocol comprised ion exchange chromatography on DEAE cellulose, affinity chromatography on Affi-gel blue gel, ion exchange chromatography on CM-cellulose and Q-Sepharose and gel filtration by fast protein liquid chromatography on Superdex 75. The starting buffer was 10 mM Tris-HCl buffer (pH 7.2), 10 mM Tris-HCl buffer (pH 7.2), 10 mM NH(4)OAc buffer (pH 5), 10 mM NH(4)HCO(3) buffer (pH 9.4) and 200 mM NH(4)HCO(3) (pH 8.5), respectively. Absorbed proteins were desorbed using NaCl added to the starting buffer. A 42-fold purification of the enzyme was achieved. The RNase was unadsorbed on DEAE cellulose, Affi-gel blue gel and CM-cellulose but adsorbed on Q-Sepharose. It exhibited maximal RNase activity at pH 5 and 70 degrees C. Some RNase activity was detectable at 100 degrees C. It demonstrated the highest ribonucleolytic activity (196 U/mg) toward poly C, the next highest activity (126 U/mg) toward poly A, and much weaker activity toward poly U (48 U/mg) and poly G (41 U/mg). The RNase inhibited [(3)H-methyl]-thymidine uptake by leukemia L1210 cells with an IC(50) of 60 microM.     

Preparation of active recombinant cathepsin K expressed in bacteria as inclusion body

Human cathepsin K (EC 3.4.22.38) is a member of the cysteine protease family with high primary sequence homology to cathepsins S, L, and B. It has been shown that cathepsin K plays a major role in the resorption of the bone matrix by osteoclasts. Cathepsin K has a potential as a drug target for the diseases related to bone matrix metabolism such as osteoporosis. We have expressed recombinant human procathepsin K in Escherichia coli as inclusion bodies. Purified procathepsin K had size of 38kDa which is in agreement with the predicted mass of the construct. Refolding was done by rapid dilution into 50mM Tris-HCl, pH 8.0 buffer containing 5mM EDTA, 10 mM GSH, 1mM GSSG, 0.7 M L-arginine, 0.5 M NaCl, and 1% CHAPS and further dialysis against 25 mM Tris-HCl, pH 8.0 containing 0.5 M NaCl. Mature active cathepsin K was prepared from refolded procathepsin K by incubating at 40 degrees C in pH 4.0 buffers with or without pepsin or cysteine. The presence of pepsin or cysteine in autocatalysis buffer did not have effect on the degree of conversion of nascent to mature cathepsin K, but reduced the autocatalysis time slightly. Proteolytic activity was confirmed using synthetic substrate, and Western blotting identified mature cathepsin K. Active cathepsin K had type I and II collagenolytic activities which could be inhibited by E-64.     

Reannealing of phalloidin-treated actin filaments during recovery after sonication and its inhibition by beta-actinin

Phalloidin (2 mol per mol actin)-treated pyrenyl F-actin showed a critical concentration of 1.8 microM in the presence of 10 mM KCl, 0.2 mM ADP, and 5 mM Tris-HCl buffer, pH 8.0 at 25 degrees C. The filament weight concentration did not change at all during and after sonication, yet degrees of flow birefringence increased and the filament number concentration decreased after the termination of sonication. The latter changes were not affected by EDTA, but inhibited by beta-actinin. These observations suggest that reannealing of short pieces of phalloidin-treated actin filaments fragmented during sonication takes place during recovery after sonication.     

Expression of a 66-kD heat shock protein associated with the process of cyst formation of a true slime mold, Physarum polycephalum.

Under unfavorable conditions for growth, haploid myxoamoebae of Physarum polycephalum retracted their pseudopodia and changed their cell shape into disk-like form, after which they constructed the cell walls to form microcysts. These morphological changes of haploid cells were associated with changes in intracellular distribution of actin filaments. Staining with phalloidin showed that actin filaments were almost uniformly distributed throughout the cytoplasm of the myxoamoebae. When these cells were transferred to a cyst-inducing medium, the actin structures changed into short rods or dots, after which the rods/dots disappeared in the microcysts. An incubation of the myxoamoebae in the cyst-inducing medium caused the synthesis of several proteins, among which a 66-kD protein was most prominently induced. The morphological changes and the induction of the 66-kD protein was pronounced at elevated temperatures, e.g. 40 degrees C. The 66-kD protein was not induced, however, when plasmodia of the same species were incubated at 40 degrees C. We found that the 66-kD protein was co-precipitated with polymerized actin and bound to ATP-agarose. A double staining of the disk-shaped cells with anti-66-kD protein antibody and phalloidin revealed superimposable localization of the 66-kD protein and actin filaments in the short rods or dots. Although the induction of the 66-kD protein was enhanced at high temperatures, the protein was immunologically unrelated to the common heat shock proteins, HSP70 and HSP90, those are highly conserved during evolution. These results indicate that the 66-kD protein is a novel heat shock protein which is specifically expressed during cyst formation.     

Receptor-mediated actin assembly in electropermeabilized neutrophils: role of intracellular pH

Neutrophil activation by a variety of stimuli is accompanied by an intracellular acidification, which has been postulated to mediate actin polymerization (Yuli and Oplatka, Science 1987, 235, 340). This hypothesis was tested using 7-nitrobenz-2-oxa-1,3-diazole (NBD)-phallacidin staining and flow cytometry, or right angle light scattering to study actin assembly in intact and electrically permeabilized human neutrophils. Intracellular pH was measured fluorimetrically using a pH sensitive dye. In cells stimulated with N-formyl-methionyl-leucyl-phenylalanine (fMLP) at 21 degrees C, actin assembly clearly preceded the intracellular acidification in response to fMLP. Moreover, actin polymerization persisted in cells where intracellular pH was clamped near the resting (unstimulated) level using nigericin/K+. Finally, fMLP induced a significant increase in F-actin content in electropermeabilized neutrophils equilibrated with an extracellular medium containing up to 50 mM HEPES. These observations indicate that fMLP-stimulated F-actin assembly is not mediated by a decrease in intracellular pH and suggest that changes in transmembrane potential and ionic gradients are unlikely to mediate actin polymerization.     

Optimization of methanol biosynthesis from methane using Methylosinus trichosporium OB3b

Methylosinus trichosporium OB3b oxidized methane to methanol in the presence of a high concentration of Cu2+. Further oxidation of methanol to formaldehyde was prevented by adding 200 mM NaCl which acted as a methanol dehydrogenase H inhibitor. The bacterium, 0.6 mg dry cell ml(-1), in methane/air (1:4, v/v) at 25 degrees C in 12.9 mM phosphate buffer (pH 7) containing 20 mM sodium formate and 200 mM NaCl accumulated 7.7 mM methanol over 36 h.     

The quantitation of G- and F-actin in cultured cells

An improved method to quantitate the amounts of filamentous (F-actin) and monomeric (globular) actin (G-actin) in cultured cells was developed. Cells are lysed into a myosin-containing buffer and F-actin is removed by centrifugation. The pelleted F-actin is then depolymerized to G-actin in a 1 mM ATP-containing buffer for 1 h before measuring the levels of G-actin using the DNase I inhibition assay. Partitioning of G-actin in the supernatant (greater than 95%) and recovery of actin in both fractions (greater than 85%) were measured by adding [3H]actin to cultured cells. Actin in the separated fractions is stable for at least 72 h at 0 degree C. Asynchronous monolayer cultures of Chinese hamster ovary (CHO) cells contain 2.5 +/- 0.2% of the total protein as actin with 72.4 +/- 5.7% as F-actin. About 10% of this F-actin is not associated with the readily sedimented Triton-cytoskeleton. CHO cells grown in suspension contain 55.8% of the actin as F-actin; following plating about 90 min is required for these cells to flatten and for the F-actin level to reach the monolayer value of about 70%.     

Actin filament destruction by osmium tetroxide

We have studied the destruction of purified muscle actin filaments by osmium tetroxide (OsO4) to develop methods to preserve actin filaments during preparation for electron microscopy. Actin filaments are fragmented during exposure to OsO4. This causes the viscosity of solutions of actin filaments to decrease, ultimately to zero, and provides a convenient quantitative assay to analyze the reaction. The rate of filament destruction is determined by the OsO4 concentration, temperature, buffer type and concentration, and pH. Filament destruction is minimized by treatment with a low concentration of OsO4 in sodium phosphate buffer, pH 6.0, at 0 degrees C. Under these conditions, the viscosity of actin filament solutions is stable and actin filaments retain their straight, unbranched structure, even after dehydration and embedding. Under more severe conditions, the straight actin filaments are converted into what look like the microfilament networks commonly observed in cells fixed with OsO4. Destruction of actin filaments can be inhibited by binding tropomyosin to the actin. Cross-linking the actin molecules within a filament with glutaraldehyde does not prevent their destruction by OsO4. The viscosity decrease requires the continued presence of free OsO4. During the time of the viscosity change, OsO4 is reduced and the sulfur-containing amino acids of actin are oxidized, but little of the osmium is bound to the actin. Over a much longer time span, the actin molecules are split into discrete peptides.     

In vitro labeling of proteins by reductive methylation: Application to proteins involved in supramolecular structures

Actin and tropomyosin, purified from both muscle and brain, and α-actinin, purified from muscle, have been labeled in vitro by reductive methylation to specific activities of greater than 10⁵ dpm/μg protein. Actin so modified bound DNase I and polymerized identically to unmodified actin. Furthermore, the spectral properties of actin did not change after labeling. The interactions of labeled tropomyosin and α-actinin with F-actin were nearly identical to those of the unmodified proteins. These modified proteins comigrated with their unmodified counterparts in both SDS-containing polyacrylamide gels and isoelectric focusing gels. The labeled actin was quantitatively extracted from SDS-containing polyacrylamide gels (yield > 98% of radioactivity applied demonstrating that all of the radioactivity was protein bound. The reductive methylation procedure worked well at pH 8.0–8.5 in either pyrophosphate buffer or Bicine buffer using formaldehyde with [³H]-sodium borohydride as the reducing agent. The procedure could also be performed at pH 7.0 in phosphate buffer using [¹⁴C]-formaldehyde with sodium cyanoborohydride as the reducing agent. Proteins so labeled are ideal for use in quantitative experiments involving protein-protein interactions.