Structural and genetic organization of IS232, a new insertion sequence of Bacillus thuringiensis.

In the Bacillus thuringiensis strains toxic for the lepidopteran larvae, the delta-endotoxin genes cryIA are frequently found within a composite transposonlike structure flanked by two inverted repeat sequences. We report that these elements are true insertion sequences and designate them IS232. IS232 is a 2,184-bp element and is delimited by two imperfect inverted repeats (28 of 37 bp are identical). Two adjacent open reading frames, overlapping for three codons, span almost the entire sequence of IS232. The potential encoded polypeptides of 50 and 30-kDa are homologous to the IstA and IstB proteins of the gram-negative insertion sequence IS21. The N-terminal part of the 50-kDa polypeptide contains a helix-turn-helix DNA-binding motif. The junctions at the insertion sites of three IS232 elements were analyzed. Each case was different, with 0, 4, or 6 bp of the target DNA being duplicated. Transposition of IS232 in Escherichia coli was demonstrated by using a genetic marker inserted upstream of the two open reading frames.     

Cointegrational transduction and mobilization of gentamicin resistance plasmid pWP14a is mediated by IS140

The structures of two R-plasmids pWP14a and pWP12a (Tra-, Ap, Gm; 21 kb) and of several cointegrates they form with bacteriophages P1Cm and P1-15 were analyzed. In each case, replicon fusion was mediated by the element IS140 (about 0.8 kb), one copy of which resides on both plasmids adjacent to the gentamicin resistance determinant (AAC(3)-III). pWP14a cointegrated preferentially into or near the invertible C-loop structure of the P1 genome. Cointegrational mobilization of pWP14a was observed also with several conjugative R-factors. The process of replicon fusion is independent of the host's rec+ functions. Sequences homologous to IS140 are constituents of many R-factors, including RA1, R40a, R124, R144, Rts1, N3, and pJR255. IS140 also shows homology to two other sequences, IS15 delta and Tn2680, but not to other, well studied transposable elements. The ampicillin resistance determinant of pWP14a is within a Tn3-like transposon, Tn3651.     

Proteolytic processing of the mosquitocidal toxin from Bacillus sphaericus SSII-1.

The 97-kDa protein Mtx21, derived from the 100-kDa mosquitocidal protein (Mtx) from Bacillus sphaericus SSII-1 by the deletion of the putative signal sequence, was expressed as a fusion protein with glutathione S-transferase in Escherichia coli, and the fusion protein was purified by affinity chromatography. The fusion protein bound to glutathione agarose was cleaved with thrombin to release the Mtx21 protein. The 97-kDa Mtx21 protein was found to be toxic to Culex quinquefasciatus larvae with a 50% lethal concentration of 15 ng/ml. Treating Mtx21 with crude mosquito larval gut extracts gave rise to two major peptides of 70 and 27 kDa. Treating the 97-kDa Mtx21 protein with trysin also gave rise to a similar proteolytic cleavage pattern. N-terminal sequencing showed that the 27-kDa peptide was derived from the N-terminal region of the 97-kDa protein and that the 70-kDa protein was from the C-terminal region of the 97-kDa protein. The 27-kDa peptide has all the previously identified regions of homology with the catalytic peptides of the ADP-ribosyltransferase toxins, such as pertussis toxin S1 peptide, while the 70-kDa peptide has three internal regions of homology.     

The istA gene of insertion sequence IS21 is essential for cleavage at the inner 3'' ends of tandemly repeated IS21 elements in vitro.

The bacterial 2.1 kb insertion sequence IS21 occurs as a tandem repeat [=(IS21)2] on the broad host range plasmid R68.45. In (IS21)2, the two IS21 elements are separated by 3 bp termed junction sequence. Plasmids carrying (IS21)2 form cointegrates with other replicons at high frequencies. The two IS21 genes, istA and istB, were found to be necessary for cointegrate formation in vivo. Since the outer ends of (IS21)2 are dispensable for cointegrate formation, we favor a transposition model according to which a plasmid carrying (IS21)2 is cleaved at the junction sequence; the opened plasmid is then inserted into a target replicon. Here we show that Escherichia coli cell extracts, which contained over-produced IstA protein, nicked a supercoiled (IS21)2 plasmid precisely at the inner 3' termini of IS21; the resulting staggered cut generated 5' protrusions. The istA gene, but not the istB gene, was required for in vitro cleavage of an IS21-IS21 junction. Because of this cleavage and our previous findings (generation of 4 bp target duplications and loss of the junction sequence after cointegrate formation in vivo) we propose that plasmids with (IS21)2 produce cointegrates by a mechanism which involves joining of the inner 3' ends of IS21 to the 5' ends of the target.     

The vaccinia virus 14-kilodalton fusion protein forms a stable complex with the processed protein encoded by the vaccinia virus A17L gene.

The mechanism by which the 14-kDa fusion protein of vaccinia virus (VV) is anchored in the envelope of intracellular naked virions (INV) is not understood. In this investigation, we demonstrate that the 14-kDa protein interacts with another virus protein with an apparent molecular mass of 21 kDa. Microsequence analysis of the N terminus of the 21-kDa protein revealed that this protein is encoded by the VV A17L gene. The 21-kDa protein is processed from a 23-kDa precursor, by cleavage at amino acid position 16, at the consensus motif Ala-Gly-Ala, previously identified as a cleavage site for several VV structural proteins. The 21-kDa protein contains two large internal hydrophobic domains characteristic of membrane proteins. Pulse-chase analysis showed that within 1 h after synthesis, the 14-kDa protein forms a stable complex with the 21-kDa protein. Formation of the complex was not inhibited by rifampin, indicating that the interaction between these two proteins occurs prior to virion morphogenesis. Immunoprecipitation analysis of disrupted virions showed the presence of the 21-kDa protein in the viral particle. Release of the 14-kDa-21-kDa protein complex from INV required treatment with the nonionic detergent Nonidet P-40 and a reducing agent. The protein complex consisted of 14-kDa trimers and of 21-kDa dimers. Since the 14-kDa fusion protein lacks a signal sequence and a large hydrophobic domain characteristic of membrane proteins, our findings suggest that the 21-kDa protein serves to anchor the 14-kDa protein to the envelope of INV.     

Polyhedrin initiator codon altered to AUU yields unexpected fusion protein from a baculovirus vector

A recombinant baculovirus expression vector was constructed to express the core (capsid) protein of the hepatitis B virus. Along with the expected 21-kDa polypeptide, a second 24-kDa protein was observed. Immunoprecipitation and immunoblotting using a rabbit polyclonal anticore antiserum demonstrated that the two proteins were related. The core gene originally was cloned in-frame with the polyhedrin initiator codon that had been altered to AUU as a means of preventing fusion protein formation. A transient expression assay revealed expression of the 24-kDa protein was prevented if a frame-shift mutation was created upstream of the HBV core translation start site. These results suggest that the 24-kDa protein was the result of an unexpectedly high level of translation initiation at the AUU codon that gave rise to a polyhedrin-HBV core fusion protein. The 24-kDa core protein was shown to be a polyhedrin fusion protein by immunoblotting with an antipolyhedrin antiserum, and initiation at the AUU was demonstrated by amino terminal protein sequencing. Methods to prevent undesired fusion protein expression using this or similar vectors are discussed.     

IS1631 occurrence in Bradyrhizobium japonicum highly reiterated sequence-possessing strains with high copy numbers of repeated sequences RSalpha and RSbeta.

From Bradyrhizobium japonicum highly reiterated sequence-possessing (HRS) strains indigenous to Niigata and Tokachi in Japan with high copy numbers of the repeated sequences RSalpha and RSbeta (K. Minamisawa, T. Isawa, Y. Nakatsuka, and N. Ichikawa, Appl. Environ. Microbiol. 64:1845-1851, 1998), several insertion sequence (IS)-like elements were isolated by using the formation of DNA duplexes by denaturation and renaturation of total DNA, followed by treatment with S1 nuclease. Most of these sequences showed structural features of bacterial IS elements, terminal inverted repeats, and homology with known IS elements and transposase genes. HRS and non-HRS strains of B. japonicum differed markedly in the profiles obtained after hybridization with all the elements tested. In particular, HRS strains of B. japonicum contained many copies of IS1631, whereas non-HRS strains completely lacked this element. This association remained true even when many field isolates of B. japonicum were examined. Consequently, IS1631 occurrence was well correlated with B. japonicum HRS strains possessing high copy numbers of the repeated sequence RSalpha or RSbeta. DNA sequence analysis indicated that IS1631 is 2,712 bp long. In addition, IS1631 belongs to the IS21 family, as evidenced by its two open reading frames, which encode putative proteins homologous to IstA and IstB of IS21, and its terminal inverted repeat sequences with multiple short repeats.     

Characterization of IS1474, an insertion sequence of the IS21 family isolated from Pseudomonas alcaligenes NCIB 9867

A new insertion sequence (IS) designated IS1474 was isolated from Pseudomonas alcaligenes NCIB 9867 (P25X). IS1474 is a 2632 bp element which showed a characteristic IS structure with 12 bp inverted repeats (IRs) flanking a 2608 bp central region. IS1474 contained four open reading frames (ORF1–ORF4), two in each orientation. Similarities were detected between ORF1 and ORF2 and the putative transposases of the IS21 family. Sequences upstream from IS1474 were found to display up to 89% homology with IS53 from Pseudomonas syringae suggesting that IS1474 had inserted into another related IS element designated IS1475. An open reading frame, ORF5, located at the junction of IS1474 and IS1475, showed similarities with the IstB protein of IS21 and could possibly be the transposase subunit of IS1475. Transposition assays showed that IS1474 transposed at a relatively low frequency leading to cointegration with target plasmids. Hybridization studies showed that IS1474 is present in at least 13 copies in the chromosome of P25X and one copy on its endogenous plasmid.     

Plasmid R46 provides a function that promotes recA-independent deletion, fusion and resolution of replicon

Summary We report that plasmid R46 provides a function which promotes recA-independent deletion, replicon fusion, and resolution of the fusion. R46 belongs to the incompatibility group N and specifies resistance to ampicillin, tetracycline, streptomycin and sulfonamide. Four kinds of deletion derivatives were observed by selection for susceptability to tetracycline from ampicillin-resistant clones. A common region, will be called region thereafter, was postulated to be involved in these deletions. The replicon fusion occurred by a conjugative mobilization of each derivative with plasmid R388. The fusion was suggested to contain both replicons linked at each junction by the sequence in the region in direct orientation. The resolution of the replicon fusion was found between two regions and a consequently generated, parental deletion derivative and an R388 derivative which gained one region. It is possible that the region contains one potential Insertion Sequence (IS) element. These events were also speculated to occur as a consequence of insertion of the potential IS onto the intramolecular or intermolecular target sequence, or reciprocal recombination between two potential IS elements.     

Intermolecular Transposition of Is10 Causes Coupled Homologous Recombination at the Transposition Site

Interplasmid and chromosome to plasmid transposition of IS10 were studied by assaying inactivation of the phage 434 cI gene, carried on a low copy number plasmid. This was detected by the activity of the tet gene expressed from the phage 434 P(R) promoter. Each interplasmid transposition resulted in the fusion of the donor and acceptor plasmids into cointegrate structure, with a 9-bp duplication of the target DNA at the insertion site. Cointegrate formation was abolished in δrecA strains, although simple insertions of IS10 were observed. This suggests a two-stage mechanism involving IS10 conservative transposition, followed by homologous recombination between the donor and the acceptor. Two plasmids carrying inactive IS10 sequences were fused to cointegrates at a 100-fold lower frequency, suggesting that homologous recombination is coupled to and stimulated by the transposition event. Each IS10 transposition from the chromosome to the acceptor plasmid involved replicon fusion, providing a mechanism for IS10-mediated integration of extrachromosomal elements into the chromosome. This was accompanied by the formation of an additional copy of IS10 in the chromosome. Thus, like replicative transposition, conservative transposition of IS10 is accompanied by cointegrate formation and results in duplication of the IS10.     

Detection of an IS2-encoded 46-kilodalton protein capable of binding terminal repeats of IS2.

The genome of the transposable element IS2 contains five open reading frames that are capable of encoding proteins greater than 50 amino acids; however, only one IS2 protein of 14 kDa had been detected. By replacing the major IS2 promoter located in the right terminal repeat of IS2 with the T7 promoter to express IS2 genes, we have detected another IS2 protein of 46 kDa. This 46-kDa protein was designated InsAB'. Analyses of the InsAB' sequence revealed motifs that are characteristic of transposases of other transposable elements. InsAB' has the ability to bind both terminal repeat sequences of IS2. It was shown to bind a 27-bp sequence (5'-GTTAAGTGATAACAGATGTCTGGAAAT-3', positions 1316 to 1290 by our numbering system [16 to 42 by the previous numbering system]) located at the inner end of the right terminal repeat and a 31-bp sequence (5'-TTATTTAAGTGATATTGGTTGTCTGGAGATT-3', positions 46 to 16 [1286 to 1316]), including the last 27 bp of the inner end and the adjacent 4 bp of the left terminal repeat of IS2. This result suggests that InsAB' is a transposase of IS2. Since there is no open reading frame capable of encoding a 46-kDa protein in the entire IS2 genome, this 46-kDa protein is probably produced by a translational frameshifting mechanism.     

Expression of adenovirus type 12 E1b 58-kDa protein in Escherichia coli and production of antibodies raised against a 58-kDa::beta-galactosidase fusion protein

DNA fragments coding for the N-terminal 185 amino acids (aa) and for the entire coding region of the adenovirus (Ad)12 E1b 58-kDa protein have been cloned in a prokaryotic expression vector. The N-terminal region of the 58-kDa viral protein (aa 21-205) is expressed as a beta-galactosidase (beta Gal) fusion protein encoded by plasmid pB58Ngal. Escherichia coli strains transformed with this plasmid synthesize a full-length fusion protein of 150-kDa and two truncated proteins: a 140-kDa protein containing aa 64-205 and a 120-kDa polypeptide containing aa 158-205 of the E1b 58-kDa protein. Antibodies raised against purified fusion proteins specifically immunoprecipitate the E1b 58-kDa protein from Ad12-infected and transformed cells. Bacteria transformed with plasmid pB58 carrying the entire E1b 58-kDa coding region (minus the first N-terminal 20 aa which are replaced by 4 aa of beta Gal) showed dramatically reduced growth properties after induction of 58K gene expression. We have not been able to detect substantial amounts of the 58-kDa protein in these cells. However, the viral 58-kDa polypeptide could be synthesized in vitro from plasmid pB58 in a DNA-dependent translation system from E. coli.     

Characterization and sequence analysis of a stable cryptic plasmid from Enterococcus faecium 226 and development of a stable cloning vector.

A small cryptic plasmid, pMBB1, isolated from Enterococcus faecium 226 was characterized. The plasmid contained an extremely stable replicon which has limited homology to the lactococcal plasmid pCI305. Sequence analysis of the replicon detected one open reading frame of 822 bp capable of encoding a 32-kDa protein. No detectable single-stranded intermediates were found for the replicon, suggesting that pMBB1 may be included in the same family as pCI305, although pCI305 exhibits a more narrow host range. A small stably maintained vector able to replicate in a variety of lactic acid bacteria, containing a large multiple cloning region, was constructed by using the pMBB1 replicon.     

Identification of Functional Domains in the 14-Kilodalton Envelope Protein (A27L) of Vaccinia Virus

The mechanism of entry of vaccinia virus (VV) into cells is still a poorly understood process. A 14-kDa protein (encoded by the A27L gene) in the envelope of intracellular mature virus (IMV) has been implicated in virus-cell attachment, virus-cell fusion, and virus release from cells. We have previously described the structural organization of the VV 14-kDa protein, consisting of a triple-stranded coiled-coil region responsible for oligomer formation and a predicted Leu zipper-like third alpha helix with an important role in the interaction with a 21-kDa membrane protein (encoded by the A17L gene) thought to anchor the 14-kDa protein to the envelope of IMV (M.-I. Vázquez, G. Rivas, D. Cregut, L. Serrano, and M. Esteban, J. Virol. 72:10126-10137, 1998). To identify the functional domains important for virus entry and release, we have generated VV recombinants containing a copy of the A27L gene regulated by the lacI operator-repressor system of Escherichia coli (VVIndA27L) in the thymidine kinase locus and a mutant form of the A27L gene in the hemagglutinin locus but expressed constitutively under the control of an early-late VV promoter. Cells infected with a VV recombinant that expresses a mutant 14-kDa form lacking the first 29 amino acids at the N terminus failed to form extracellular enveloped virus (EEV). Fusion-from-without assays with purified virus confirmed that the fusion process was mediated by the 14-kDa protein and the fusion domain to be contained within amino acids 29 to 43 of the N-terminal region. Competitive inhibition of the infection process with soluble heparin and synthetic peptides and in vitro experiments with purified mutant proteins identified the heparin binding domain within amino acids 21 to 33, suggesting that this domain is involved in virus-cell binding via heparan sulfate. Thus, the N terminus of the 14-kDa protein contains a heparin binding domain, a fusion domain, and a domain responsible for interacting with proteins or lipids in the Golgi stacks for EEV formation and virus spread.     

Antibodies to 100- and 60-kDa surface proteins inhibit substratum attachment and differentiation of rodent skeletal myoblasts

A rabbit polyclonal antiserum was raised against membrane vesicles shed from the surface of fusing L6 rat myoblasts. In immunoblots the antiserum recognized fibronectin, a protein of approximately 100,000 Da (100-kDa), and a protein of approximately 60,000 Da (60 kDa). If added prior to cellular alignment, immunoglobulins from this serum inhibited fusion of both rat (L6) and mouse (C2) myoblasts in a dose-dependent fashion. To determine which component of this serum was responsible for fusion inhibition, antibodies against fibronectin, the 100- and 60-kDa proteins were microaffinity purified and tested, individually, for their effects on myoblast fusion. Antibodies against fibronectin had no effect on fusion. Antibodies against the 100-kDa protein released most cells from the substratum. Antibodies against the 60-kDa protein completely inhibited fusion. Fusion inhibition was accompanied by a corresponding inhibition of expression of two differentiation markers, creatine phosphokinase and the acetylcholine receptor. The 60-kDa protein was found, by immunoblot analysis, in smooth muscle-like cells (BC3H1 cells) and in variant L6 cells that do not differentiate and do not fuse. However, in the differentiation incompetent cells, the 60-kDa antigen appeared to be present in reduced amount. Indirect immunofluorescence of unpermeabilized L6 cells revealed alterations in the distribution of all three antigens during development. Fibronectin first appeared in long fibrillar arrays above the surface of cells that were beginning to align and fuse; fibronectin was not present on myotubes. The 100-kDa protein was seen initially in prominent fibrillar projections at the tips of prefusion myoblasts. During fusion the antigen was observed at sites of cell-cell contact and on extracellular vesicles. The 100-kDa protein appeared to be less abundant on myotubes. The 60-kDa protein first appeared in regions of cell-cell contact on cells that were beginning to align and fuse. As. fusion progressed, the 60-kDa protein was also found in extracellular vesicles. The 60-kDa protein was not observed on myotubes. As a result of this study we have identified two previously undescribed cell surface proteins involved in rodent skeletal myogenesis. The first is an approximately 100-kDa protein involved in early interactions of skeletal myoblasts with their substratum. The second is an approximately 60-kDa protein involved in myoblast differentiation. Both proteins are shed from the myoblast surface during myotube formation.     

Trimethoprim-Produced F-Specific Insertion Mutations in Escherichia coli K-12

Besides producing thymine-requiring mutants (thy), trimethoprim (TMP) cured the mini-ColE1 replicon pML21 at an appreciable frequency. The cured Escherichia coli K-12 cells behaved like polA mutants by failing to support the stable maintenance of the ColE1 plasmid. The mini-F replicon pSC138, which was lacking all three insertion sequences (IS3, gammadelta, and IS2) normally used for F-specific integration and excision, was not cured by TMP. Instead, it integrated into specific regions of the E. coli chromosome and thus caused auxotrophic mutations in operons which were always localized on either side of oriC (origin of chromosomal replication). The incompatibility and replication functions of the integrated plasmid in auxotrophs were retained, and the plasmid DNAs recovered from spontaneously occurring revertants did not show any alterations in their contour lengths as determined by electron microscopy. The F replicon (fragment 5) contained in plasmid pSC138 carried two origins of replication, the primary origin, oriV(1) at 42.6F and the secondary origin, oriV(2), at 44.1F. Another mini-F plasmid pMF21, deleted of the primary origin of replication (oriV(1)), was still capable of autonomous replication but failed to integrate onto the chromosome after TMP treatment. Furthermore, the composite plasmid pRS5, which normally uses only the replication origin and functions of the pSC101 component, was also insensitive to TMP. On the basis of these results, we propose a new scheme of F integration via the functional oriV(1) and suggest the involvement of a similar mechanism in the formation of Hfr strains by integrative suppression.     

Target specificity of insertion element IS30

The Escherichia coli resident mobile element IS 30 has pronounced target specificity. Upon transposition, the element frequently inserts exactly into the same position of a preferred target sequence. Insertion sites in phages, plasmids and in the genome of E. coli are characterized by an exceptionally long palindromic consensus sequence that provides strong specificity for IS 30 insertions, despite a relatively high level of degeneracy. This 24-bp-long region alone determines the attractiveness of the target DNA and the exact position of IS 30 insertion. The divergence of a target site from the consensus and the occurrence of 'non-permitted' bases in certain positions influence the target activity. Differences in attractiveness are emphasized if two targets are present in the same replicon, as was demonstrated by quantitative analysis. In a system of competitive targets, the oligonucleotide sequence representing the consensus of genomic IS 30 insertion sites proved to be the most efficient target. Having compared the known insertion sites, we suppose that IS 30 -like target specificity, which may represent an alternative strategy in target selection among mobile elements, is characteristic of the insertion sequences IS 3 , IS 6 and IS 21 , too.