Fast-scanning atomic force microscopy reveals the ATP/ADP-dependent conformational changes of GroEL

In order to fold non-native proteins, chaperonin GroEL undergoes numerous conformational changes and GroES binding in the ATP-dependent reaction cycle. We constructed the real-time three-dimensional-observation system at high resolution using a newly developed fast-scanning atomic force microscope. Using this system, we visualized the GroES binding to and dissociation from individual GroEL with a lifetime of 6 s (k=0.17 s(-1)). We also caught ATP/ADP-induced open-closed conformational changes of individual GroEL in the absence of qGroES and substrate proteins. Namely, the ATP/ADP-bound GroEL can change its conformation 'from closed to open' without additional ATP hydrolysis. Furthermore, the lifetime of open conformation in the presence of ADP ( approximately 1.0 s) was apparently lower than those of ATP and ATP-analogs (2-3 s), meaning that ADP-bound open-form is structurally less stable than ATP-bound open-form. These results indicate that GroEL has at least two distinct open-conformations in the presence of nucleotide; ATP-bound prehydrolysis open-form and ADP-bound open-form, and the ATP hydrolysis in open-form destabilizes its open-conformation and induces the 'from open to closed' conformational change of GroEL.     

Molecular characterization of GroES and GroEL homologues from Clostridium botulinum

We report novel findings of significant amounts of 60- and 10-kDa proteins on SDS-PAGE in a culture supernatant of the Clostridium botulinum type D strain 4947 (D-4947). The N-terminal amino acid sequences of the purified proteins were closely related to those of other bacterial GroEL and GroES proteins, and both positively cross-reacted with Escherichia coli GroEL and GroES antibodies. Native GroEL homologue as an oligomeric complex is a weak ATPase whose activity is inhibited by the presence of GroES homologue. The 2634-bp groESL operon of D-4947 was isolated by PCR and sequenced. The sequence included two complete open reading frames (282 and 1629 bp), which were homologous to the groES and groEL gene family of bacterial proteins. Southern and Northern blot analyses indicate that the groESL operon is encoded on the genomic DNA of D-4947 as a single copy, and not on that of its specific toxin-converting phage.     

High-speed atomic force microscopy: Imaging and force spectroscopy

Atomic force microscopy (AFM) is the type of scanning probe microscopy that is probably best adapted for imaging biological samples in physiological conditions with submolecular lateral and vertical resolution. In addition, AFM is a method of choice to study the mechanical unfolding of proteins or for cellular force spectroscopy. In spite of 28 years of successful use in biological sciences, AFM is far from enjoying the same popularity as electron and fluorescence microscopy. The advent of high-speed atomic force microscopy (HS-AFM), about 10 years ago, has provided unprecedented insights into the dynamics of membrane proteins and molecular machines from the single-molecule to the cellular level. HS-AFM imaging at nanometer-resolution and sub-second frame rate may open novel research fields depicting dynamic events at the single bio-molecule level. As such, HS-AFM is complementary to other structural and cellular biology techniques, and hopefully will gain acceptance from researchers from various fields. In this review we describe some of the most recent reports of dynamic bio-molecular imaging by HS-AFM, as well as the advent of high-speed force spectroscopy (HS-FS) for single protein unfolding.     

Basement membrane macromolecules: insights from atomic force microscopy

The major macromolecules of basement membranes-collagen IV, laminin-1, and heparan sulfate proteoglycan (HSPG)-have been analyzed by atomic force microscopy (AFM), both individually and in combination with each other. The positions of laminin binding to collagen IV were mapped and compared with the positions of imperfections in the amino acid sequence of collagen IV; the apparent molecular volumes of the HSPG proteoglycans were measured and used to estimate the corresponding molecular weights. Even the thin, thread-like strands of the polyanion heparan sulfate can be visualized with AFM without staining, coating, or fixation. These strands are single polysaccharide chains and are thus thinner than single-stranded DNA. The heparan sulfate strands in HSPG are necessary for protein filtration in kidney basement membranes. We propose that these thin strands filter proteins by functioning as an entropic brush-i.e., that they filter proteins by their constant thermally driven motion in the basement membrane. These AFM analyses in air are a step toward AFM analyses under fluid of basement membrane macromolecules interacting with each other.     

巨大芽孢杆菌分子伴侣GroES和GroEL新基因的克隆及同源性分析

巨大芽孢杆菌作为革兰氏阳性细菌的一种,是良好的重组蛋白的表达宿主.本研究利用PCR技术从巨大芽孢杆菌基因组克隆出一条1.9Kb的基因片段.核酸序列分析结果表明,该片段全长1984bp,包含2个ORF,分别与芽孢杆菌来源的GroES和GroEL基因有高度的相似性.氨基酸序列比对发现,GroES蛋白与枯草芽孢杆菌来源的GroES蛋白氨基酸序列同源性为91%,GroEL蛋白氨基酸序列同源性为90%.     

Ultrastable atomic force microscopy: Improved force and positional stability

Atomic force microscopy (AFM) is an exciting technique for biophysical studies of single molecules, but its usefulness is limited by instrumental drift. We dramatically reduced positional drift by adding two lasers to track and thereby actively stabilize the tip and the surface. These lasers also enabled label-free optical images that were spatially aligned to the tip position. Finally, sub-pN force stability over 100 s was achieved by removing the gold coating from soft cantilevers. These enhancements to AFM instrumentation can immediately benefit research in biophysics and nanoscience.     

Hyaluronic acid by atomic force microscopy.

Hyaluronic acid (HA) of different molecular weights has been examined by atomic force microscopy (AFM) in air. This technique allows 3-D surface images of soft samples without any pretreatment, such as shadowing or staining. In the present study we examined the supermolecular organization of HA chains when deposited on mica and graphite, to better understand the interchain and intrachain interactions of HA molecules in solution. The concentration of the solution deposited varied from 0.001 to 1 mg/ml. On both substrates, and independent of the concentration, high-molecular-mass HA formed networks in which molecules ran parallel for hundreds of nanometers, giving rise to flat sheets and tubular structures that separate and rejoin into similar neighboring aggregates. Accurate measurements of the thickness of the thinnest sheets were consistent with a monolayer of HA molecules, 0.3 nm thick, strongly indicating lateral aggregation forces between chains as well as rather strong hydrophilic interactions between mica and HA. The results agree with an existing model of HA tertiary structure in solution in which the network is stabilized by both hydrophilic and hydrophobic interactions. Our images support this model and indicate that hydrophobic interactions between chains may exert a pivotal role in aqueous solution.     

Imaging biomolecule arrays by atomic force microscopy.

We describe here a method for constructing ordered molecular arrays and for detecting binding of biomolecules to these arrays using atomic force microscopy (AFM). These arrays simplify the discrimination of surface-bound biomolecules through the spatial control of ligand presentation. First, photolithography is used to spatially direct the synthesis of a matrix of biological ligands. A high-affinity binding partner is then applied to the matrix, which binds at locations defined by the ligand array. AFM is then used to detect the presence and organization of the high-affinity binding partner. Streptavidin-biotin arrays of 100 x 100 microns and 8 x 8 microns elements were fabricated by this method. Contact and noncontact AFM images reveal a dense lawn of streptavidin specific to the regions of biotin derivatization. These protein regions are characterized by a height profile of approximately 40 A over the base substrate with a 350-nm edge corresponding to the diffraction zone of the photolithography. High resolution scans reveal a granular topography dominated by 300 A diameter features. The ligand-bound protein can then be etched from the substrate using the AFM tip, leaving an 8 A shelf that probably corresponds to the underlying biotin layer.     

Overproduction, purification and characterization of GroES and GroEL from thermophilic Bacillus stearothermophilus

Abstract Biofilms containing diverse microflora were developed on bitumen-painted steel and glass tiles suspended in a chemostat model of a water distribution system. Escherichia coli , taken from a naturally occurring biofilm, was transformed with a plasmid containing the anaerobically induced nirB promoter fused to the lacZ reporter gene. The resulting transformant, PRB1, was introduced into the chemostat. After 7 and 13 days, an E. coli strain with an anaerobically induced Lac⁺ phenotype was present in the biofilm. Development of an episcopic differential interference contrast technique combined with UV fluorescence microscopy enabled the simultaneous visualization of E. coli in the biofilm using a fluorescent probe to detect expression of the gusA reporter gene and a lacZ fluorescent probe to monitor anaerobic expression of β-galactosidase from pnirB .     

Differentiating inclusion complexes from host molecules by tapping-mode atomic force microscopy.

Tapping-mode atomic force microscopy imaging under different cantilever vibration amplitudes has been used to differentiate the host beta-cyclodextrin nanotubes from retinal/beta-cyclodextrin inclusion complex nanotubes. It was observed that both compounds were deformed differently by the applied probe force because of their different local rigidity. This change in the elasticity properties can be explained as a consequence of the inclusion process. This method shows that tapping-mode atomic force microscopy is an useful tool to map soft sample elasticity properties and to distinguish inclusion complexes from their host molecules on the basis of their different mechanical response.     

Heterogeneous cell mechanical properties: an atomic force microscopy study.

Atomic force microscopy (AFM) is a non-invasive microscopy to explore living biological systems like cells in liquid environment. Thus AFM is an appropriate tool to investigate surface chemical modification and its influence on biological systems. In particular, control over biomaterial surface chemistry can result in a regulated cell response. This report investigates the influence of adhesive and non-adhesive surfaces on the cell morphology and the influence of the cytoskeleton structure on the local mechanical properties. In this study, the main work concerns a thorough investigation of the height images obtained with an AFM as therecorded images provide the evolution of the mechanical properties of the cell as function of its local structure. Information on the cell elasticity due to the cytoskeleton organization is deduced when comparing the AFM tip indentation depth versus the distance between the cytoskeleton bundles for the different samples.     

High-resolution atomic force microscopy of DNA

A method using high resolution atomic force microscopy for imaging DNA has been elaborated. Using super-sharp probes and modified graphite as support for molecule adsorption, DNA molecule images were obtained whose resolution made possible the observation of their fine structure with repeated helical motifs. The method can be used to visualize individual spread molecules of single-stranded DNA.     

Electrostatic interaction in atomic force microscopy

In atomic force microscopy, the stylus experiences an electrostatic force when imaging in aqueous medium above a charged surface. This force has been calculated numerically with continuum theory for a silicon nitrite or silicon oxide stylus. For comparison, the Van der Waals force was also calculated. In contrast to the Van der Waals attraction, the electrostatic force is repulsive. At a distance of 0.5 nm the electrostatic force is typically 10^-12-10^-10 N and thus comparable in strength to the Van der Waals force. The electrostatic force increases with increasing surface charge density and decreases roughly exponentially with distance. It can be reduced by imaging in high salt concentrations. Below surface potentials of ≈50 mV, a simple analytical approximation of the electrostatic force is described.     

Towards nanomicrobiology using atomic force microscopy

At the cross-roads of nanoscience and microbiology, the nanoscale analysis of microbial cells using atomic force microscopy (AFM) is an exciting, rapidly evolving research field. Over the past decade, there has been tremendous progress in our use of AFM to observe membrane proteins and live cells at high resolution. Remarkable advances have also been made in applying force spectroscopy to manipulate single membrane proteins, to map surface properties and receptor sites on cells and to measure cellular interactions at the single-cell and single-molecule levels. In addition, recent developments in cantilever nanosensors have opened up new avenues for the label-free detection of microorganisms and bioanalytes.     

Imaging polysaccharides by atomic force microscopy

Techniques have been developed for the routine reliable imaging of polysaccharides by atomic force microscopy (AFM). The polysaccharides are deposited from aqueous solution onto the surface of freshly cleaved mica, air dried, and then imaged under alcohols. The rationale behind the development of the methodology is described and data is presented for the bacterial polysaccharides xanthan, acetan, and the plant polysaccharides 1-carrageenan and pectin. Studies on uncoated polysaccharides have demonstrated the improved resolution achievable when compared to more traditional metal-coated samples or replicas. For acetan the present methodology has permitted imaging of the helical structure. Finally, in addition to data obtained on individual polysaccharides, AFM images have also been obtained of the network structures formed by κ-carrageenan and gellan gum. © 1996 John Wiley & Sons, Inc.     

Analysis off cereal chromosomes by atomic force microscopy.

Atomic force microscopy has been applied to the study of plant chromosomes from cereal grasses Triticum aestivum (bread wheat), Triticum tauschii, and Hordeum vulgare (barley). Using standard mitotic metaphase squashes, high resolution images have been obtained of untreated chromosomes and also of chromosomes after C-banding, N-banding, and in situ hybridization. The true 3-dimensional nature of the images permits detailed analysis of the surface structure and, on untreated uncoated chromosomes, surface features on a length scale consistent with nucleosome structures have been observed. C+ and N+ regions are manifest as areas of high relief on a slightly collapsed chromosome structure. In situ hybridization leads to a more severe degradation of the native structure, although it is still possible to correlate the optical signal with the topography of the hybridized chromosome. Key words : atomic force microscope, AFM, chromosomes, C-banding, in situ hybridization.     

Imaging the RecA-DNA complex by atomic force microscopy.

Atomic force microscopy (AFM) was applied to study the RecA protein and its complexes with DNA in air and in aqueous solution. RecA and DNA were reacted under several conditions, and deposited onto a mica substrate pre-treated in various ways. We found that the structure of the RecA and RecA-DNA complexes, especially the height of the molecules, was affected by the sample preparation method such as gel filtration, and environment during imaging.     

Viewing molecules with scanning tunneling microscopy and atomic force microscopy

Two new microscopic techniques make it possible to obtain images of biologically interesting molecules directly in air, vacuum, or under water. Scanning tunneling microscopy and atomic force microscopy both have the capacity to visualize atoms on the surface of rigid structures and provide details of molecular structure for lipids, proteins, carbohydrates, and nucleic acids. In addition to providing visualizations of individual molecules, these scanning probe techniques allow direct imaging of complexes between molecules or between molecules and higher-order subcellular structures such as membranes and cytoskeletal components. Both microscopes can be operated under a variety of ambient conditions ranging from high vacuum to above atmospheric pressure. Specimens need not be dry; both techniques have been used to image molecules in aqueous media under nearly physiological conditions. It is proposed that as these techniques mature they will allow direct observation of many molecular interactions under physiological conditions or even in vivo while they are occurring within the cell.     

Cooperativity in ATP hydrolysis by GroEL is increased by GroES.

The kinetics of ATP hydrolysis by the 'molecular chaperone' GroEL and the inhibition of this hydrolysis by GroES have been studied in more detail. It is shown that the hydrolysis of ATP by GroEL is cooperative with respect to ATP with a Hill coefficient of 1.86 (+/- 0.13). In the presence of GroES, there is an increase in the degree of cooperativity with a Hill coefficient of 3.01 (+/- 0.18). The observed cooperativity is not due to dissociation of the GroEL oligomer into smaller units but more probably involves structural changes within the GroEL oligomer.