A putative lipoprotein of Sphingomonas sp. strain A1 binds alginate rather than a lipid moiety

Gram-negative Sphingomonas sp. strain A1 accumulates alginate in the cell surface pit and directly incorporates the polysaccharide into its cytoplasm through a 'superchannel'. A cell surface protein Algp7 (27 kDa) is inducibly expressed in the presence of alginate. Although the protein Algp7 was initially classified as a lipoprotein based on its primary structure, Algp7 purified from strain A1 cells did not possess a lipid moiety. Algp7 bound alginate efficiently at a neutral pH with a K(d) of 3.6 x 10(-8) M, suggesting that the cell surface protein contributed to accumulation of alginate in the pit.     

Proteomics-based identification of outer-membrane proteins responsible for import of macromolecules in Sphingomonas sp. A1: alginate-binding flagellin on the cell surface

A nonmotile gram-negative bacterium, Sphingomonas sp. A1, directly incorporates macromolecules such as alginate through a "super-channel" consisting of a pit formed on the cell surface, alginate-binding proteins in the periplasm, and an ATP-binding cassette transporter in the inner membrane. Here, we demonstrate the proteomics-based identification of cell-surface proteins involved in the formation of the pit and/or import of alginate. Cell-surface proteins were prepared from the outer membrane released as vesicles during the conversion of intact cells to spheroplasts. Seven proteins (p1-p7) with acidic isoelectric points were inducibly expressed in the outer membrane of strain A1 cells grown on alginate and showed significant identity with bacterial cell-surface proteins (p1-p4, TonB-dependent outer-membrane transporter; p5 and p6, flagellin; and p7, lipoprotein). Each mutant with a disruption of the p1-p4 or p6 gene showed significant growth retardation in the alginate medium. Flagellin homologues (p5 and p6) were further analyzed because strain A1 forms no flagellum. p5 was found to be uniformly distributed on the cell surface by immunogold-labeling electron microscopy and to exhibit alginate binding with a nanomolar dissociation constant by a surface plasmon resonance sensor. The cell surface of the p6 gene disruptant differed from that of the wild-type strain A1 in that pit formation was incomplete and cell-surface structures shifted from pleats to networks. These results suggest that, distinct from bacterial flagellins constituting a helical filament of flagella, strain A1 cell-surface flagellin homologues function as receptors for alginate and/or regulators of cell-surface structures.     

Crystal structure of AlgQ2, a macromolecule (alginate)-binding protein of Sphingomonas sp. A1 at 2.0A resolution

Sphingomonas sp. A1 possesses a high molecular mass (average 25,700 Da) alginate uptake system mediated by a novel pit-dependent ABC transporter. The X-ray crystallographic structure of AlgQ2 (57,200 Da), an alginate-binding protein in the system, was determined by the multiple isomorphous replacement method and refined at 2.0 A resolution with a final R-factor of 18.3% for 15 to 2.0 A resolution data. The refined structure of AlgQ2 was comprised of 492 amino acid residues, 172 water molecules, and one calcium ion. AlgQ2 was composed of two globular domains with a deep cleft between them, which is expected to be the alginate-binding site. The overall structure is basically similar to that of maltose/maltodextrin-binding protein, except for the presence of an N2-subdomain. The entire calcium ion-binding site is similar to the site in the EF-hand motif, but comprises a ten residue loop. This calcium ion-binding site is about 40 A away from the alginate-binding site.     

Molecular identification and characterization of an alginate-binding protein on the cell surface of Sphingomonas sp. A1

Cells of Sphingomonas sp. A1 (strain A1) directly incorporate a macromolecule, alginate, into cytoplasm through a biosystem, or "super-channel," consisting of a pit on the cell surface, alginate-binding proteins in periplasm, and an ABC transporter in the inner membrane. The pit functions as a concentrator for extracellular alginate. Through differential display analysis, a protein (p8) with a molecular mass of 20kDa and a pI of 7.4 was found to be inducibly expressed in the outer membrane of alginate-grown cells. The gene coding for p8 was identified in the genome of strain A1 and shown to be similar to that for the polyhydroxyalkanoate granule-associated protein of Ralstonia eutropha. The disruptant of p8 gene showed significant growth retardation in the alginate medium. An overexpression system for p8 was constructed in Escherichia coli, and the protein was purified and characterized. Surface plasmon resonance biosensor analysis indicated that p8 is able to bind alginate most efficiently at pH 4.0. The above results indicate that p8 is a cell surface protein able to bind alginate and facilitates the concentration of alginate in the pit on the cell surface of strain A1.     

Direct evidence for Sphingomonas sp. A1 periplasmic proteins as macromolecule-binding proteins associated with the ABC transporter: molecular insights into alginate transport in the periplasm

A Gram-negative bacterium, Sphingomonas sp. A1, has a macromolecule (alginate) import system consisting of a pit on the cell surface and an alginate-specific ATP-binding cassette importer in the inner membrane. Transport of alginate from the pit to the ABC importer is probably mediated by two periplasmic binding protein homologues (AlgQ1 and AlgQ2). Here we describe characteristics of binding of AlgQ1 and AlgQ2 to alginate and its oligosaccharides through surface plasmon resonance biosensor analysis, UV absorption difference spectroscopy, and X-ray crystallography. Both AlgQ1 and AlgQ2 were inducibly expressed in the periplasm of alginate-grown cells of strain A1. Biosensor analysis indicated that both proteins specifically bind alginate with a high degree of polymerization (>100) and that dissociation constants for alginate with an average molecular mass of 26 kDa are 2.3 x 10(-)(7) M for AlgQ1 and 1.5 x 10(-)(7) M for AlgQ2. An in vitro ATPase assay using the membrane complex, including the alginate ABC importer, suggested that both alginate-bound forms of AlgQ1 and AlgQ2 are closely associated with the importer. X-ray crystallography showed that AlgQ1 consisted of two domains separated by a deep cleft that binds alginate oligosaccharides through a conformational change in the two domains. These results directly show that alginate-binding proteins play an important role in the efficient transport of alginate macromolecules with different degrees of polymerization in the periplasm.     

Crystal structure of AlgQ2, a macromolecule (alginate)-binding protein of Sphingomonas sp. A1, complexed with an alginate tetrasaccharide at 1.6-A resolution

Sphingomonas sp. A1 possesses a high molecular weight (HMW) alginate uptake system composed of a novel pit formed on the cell surface and a pit-dependent ATP-binding cassette (ABC) transporter in the inner membrane. The transportation of HMW alginate from the pit to the ABC transporter is mediated by the periplasmic HMW alginate-binding proteins AlgQ1 and AlgQ2. We determined the crystal structure of AlgQ2 complexed with an alginate tetrasaccharide using an alginate-free (apo) form as a search model and refined it at 1.6-A resolution. One tetrasaccharide was found between the N and C-terminal domains, which are connected by three extended hinge loops. The tetrasaccharide complex took on a closed domain form, in contrast to the open domain form of the apo form. The tetrasaccharide was bound in the cleft between the domains through van der Waals interactions and the formation of hydrogen bonds. Among the four sugar residues, the nonreducing end residue was located at the bottom of the cleft and exhibited the largest number of interactions with the surrounding amino acid residues, suggesting that AlgQ2 mainly recognizes and binds to the nonreducing part of a HMW alginate and delivers the polymer to the ABC transporter through conformational changes (open and closed forms) of the two domains.     

Structural studies on bacterial system used in the recognition and uptake of the macromolecule alginate

Alginate is an acidic heteropolysaccharide produced by brown seaweed and certain kinds of bacteria. The cells of Sphingomonas sp. strain A1, a gram-negative bacterium, have several alginate-degrading enzymes in their cytoplasm and efficiently utilize this polymer for their growth. Sphingomonas sp. strain A1 cells can directly incorporate alginate into their cytoplasm through a transport system consisting of a “pit” on their cell surface, substrate-binding proteins in their periplasm, and an ATP-binding cassette transporter in their inner membrane. This review deals with the structural and functional aspects of bacterial systems necessary for the recognition and uptake of alginate.     

A novel bacterial ATP-binding cassette transporter system that allows uptake of macromolecules

A gram-negative bacterium, Sphingomonas sp. strain A1, isolated as a producer of alginate lyase, has a characteristic cell envelope structure and forms a mouth-like pit on its surface. The pit is produced only when the cells have to incorporate and assimilate alginate. An alginate uptake-deficient mutant was derived from cells of strain A1. One open reading frame, algS (1,089 bp), exhibiting homology to the bacterial ATP-binding domain of an ABC transporter, was cloned as a fragment complementing the mutation. algS was followed by two open reading frames, algM1 (972 bp) and algM2 (879 bp), which exhibit homology with the transmembrane permeases of ABC transporters. Disruption of algS of strain A1 resulted in the failure to incorporate alginate and to form a pit. Hexahistidine-tagged AlgS protein (AlgS(His6)) overexpressed in Escherichia coli and purified by Ni(2+) affinity column chromatography showed ATPase activity. Based on these results, we propose the occurrence of a novel pit-dependent ABC transporter system that allows the uptake of macromolecules.     

Molecular characterisation of ABC transporter type FtsE and FtsX proteins of Mycobacterium tuberculosis

Elicitation of drug resistance and various survival strategies inside host macrophages have been the hallmarks of Mycobacterium tuberculosis as a successful pathogen. ATP Binding Cassette (ABC) transporter type proteins are known to be involved in the efflux of drugs in bacterial and mammalian systems. FtsE, an ABC transporter type protein, in association with the integral membrane protein FtsX, is involved in the assembly of potassium ion transport proteins and probably of cell division proteins as well, both of which being relevant to tubercle bacillus. In this study, we cloned ftsE gene of M. tuberculosis, overexpressed and purified. The recombinant MtFtsE-6xHis protein and the native MtFtsE protein were found localized on the membrane of E. coli and M. tuberculosis cells, respectively. MtFtsE-6xHis protein showed ATP binding in vitro, for which the K42 residue in the Walker A motif was found essential. While MtFtsE-6xHis protein could partially complement growth defect of E. coli ftsE temperature-sensitive strain MFT1181, co-expression of MtFtsE and MtFtsX efficiently complemented the growth defect, indicating that the MtFtsE and MtFtsX proteins might be performing an associated function. MtFtsE and MtFtsX-6xHis proteins were found to exist as a complex on the membrane of E. coli cells co-expressing the two proteins.     

Structure and function of bacterial super-biosystem responsible for import and depolymerization of macromolecules

Generally, when microbes assimilate macromolecules, they incorporate low-molecular-weight products derived from macromolecules through the actions of extracellular degrading enzymes. However, a Gram-negative bacterium, Sphingomonas sp. A1, has a smart biosystem for the import and depolymerization of macromolecules. The bacterial cells directly incorporate a macromolecule, alginate, into the cytoplasm through a "superchannel", as we named it. The superchannel consists of a pit on the cell surface, alginate-binding proteins in the periplasm, and an ATP-binding cassette transporter in the inner membrane. Cytoplasmic polysaccharide lyases depolymerize alginate into the constituent monosaccharides. Other than the proteins characterized so far, novel proteins (e.g., flagellin homologs) have been found to be crucial for the import and depolymerization of alginate through genomics- and proteomics-based identification, thus indicating that the biosystem is precisely constructed and regulated by diverse proteins. In this review, we focus on the structure and function of the bacterial biosystem together with the evolution of related proteins.     

Alginate from the macroalgae <Emphasis Type="Bold">Sargassum sinicola</Emphasis> as a novel source for microbial immobilization material in wastewater treatment and plant growth promotion

Alginate extracted from the macroalgae Sargassum sinicola was used as the raw material for co-immobilization of the microalgae Chlorella sorokiniana and growth-promoting bacterium Azospirillum brasilense for wastewater treatment and as an inoculant carrier of A. brasilense for plant growth promotion. The composition, structure, viscosity, color, and phenolic compound content of the alginate were analyzed and compared with commercially available alginate produced from the macroalgae Macrocystis pyrifera. From ¹H NMR analysis of alginate, S. sinicola was found to have more guluronic acid (F _G=0.64) than it had mannuronic acid (F _M=0.38) and had a viscosity of 13.5 m Pa s compared to 50 m Pa s for M. pyrifera. The S. sinicola alginate had dark brown color, reducing light penetration, with more phenolic compounds than M. pyrifera alginate. Nonetheless, growth of C. sorokiniana and A. brasilense in S. sinicola alginate was not significantly different than the growth in M. pyrifera alginate beads. Nutrient removal from wastewater by the co-immobilized microorganisms was similar for both types of alginate beads, and so was the growth enhancement of tomato plants inoculated with microbeads containing A. brasilense. This study shows the potential use of S. sinicola alginate as a raw material for cell immobilization for wastewater treatment and plant growth promotion.     

Comparison of metal‐bound and unbound structures of aminopeptidase B proteins from Escherichia coli and Yersinia pestis

Protein degradation by aminopeptidases is involved in bacterial responses to stress. Escherichia coli produces two metal‐dependent M17 family leucine aminopeptidases (LAPs), aminopeptidase A (PepA) and aminopeptidase B (PepB). Several structures have been solved for PepA as well as other bacterial M17 peptidases. Herein, we report the first structures of a PepB M17 peptidase. The E. coli PepB protein structure was determined at a resolution of 2.05 and 2.6 Å. One structure has both Zn²⁺ and Mn²⁺, while the second structure has two Zn²⁺ ions bound to the active site. A 2.75 Å apo structure is also reported for PepB from Yersinia pestis. Both proteins form homohexamers, similar to the overall arrangement of PepA and other M17 peptidases. However, the divergent N‐terminal domain in PepB is much larger resulting in a tertiary structure that is more expanded. Modeling of a dipeptide substrate into the C‐terminal LAP domain reveals contacts that account for PepB to uniquely cleave after aspartate.     

A new high-alkaline alginate lyase from a deep-sea bacterium Agarivorans sp.

A high-alkaline, salt-activated alginate lyase is produced by Agarivorans sp. JAM-A1m from a deep-sea sediment off Cape Nomamisaki on Kyushu Island, Japan. Purified to homogeneity, as judged by SDS-PAGE, the enzyme (A1m) had a molecular mass of approximately 31 kDa. The optimal pH was around 10 in glycine–NaOH buffer, and the activity was increased to 1.8 times by adding 0.2 M NaCl. However, when the optimal pH in the presence of 0.2 M NaCl was shifted to pH 9.0, the activity was more than 10 times compared with that at pH 9 in the absence of NaCl. A1m showed the optimal temperature at around 30°C and was stable to incubation between pH 6 and 9. The enzyme degraded favorably mannuronate–guluronate and guluronate-rich fragments in alginate. Shotgun cloning and sequencing of the gene for A1m revealed a 930-bp open reading frame, which encoded a mature enzyme of 289 amino acids (32,295 Da) belonging to polysaccharide lyase family 7. The deduced amino acid sequence showed the highest similarity to that of a Klebsiella enzyme, with only 54% identity.     

Monomer composition and sequence of sodium alginate extracted at pilot plant scale from three commercially important seaweeds from Mexico

The marine waters of the Baja California peninsula (Mexico) are a rich source of brown seaweeds with a great potential for exploitation. For that reason, Sargassum sinicola, Eisenia arborea, and Macrocystis pyrifera collected from different locations were subjected to extraction of sodium alginate using a pilot-plant scale process developed in our facilities. The composition and sequence parameters of the recovered alginate were studied by infrared and nuclear magnetic resonance spectroscopy. The spectral analysis of the products revealed that sodium alginate from S. sinicola contains a greater proportion of guluronate monomers (64%) than that from E. arborea (48%), and M. pyrifera (38%). Computation of the frequencies of diads and triads indicated that the alginate from S. sinicola was constructed by intercalated guluronate-blocks of 14 residues in length. In contrast, the length of the G-block in the alginates from E. arborea and M. pyrifera were 7 and 4 residues, respectively. The results show that S. sinicola, E. arborea, and M. pyrifera are sources of sodium alginate with different mannuronate/guluronate ratios, as well as a varied building-block length. In consequence, aqueous dispersions of sodium alginate from the three studied species are expected to exhibit different physical properties.     

Bacterial alginates: from biosynthesis to applications

Alginate is a polysaccharide belonging to the family of linear (unbranched), non-repeating copolymers, consisting of variable amounts of β-d-mannuronic acid and its C5-epimer α- l-guluronic acid linked via β-1,4-glycosidic bonds. Like DNA, alginate is a negatively charged polymer, imparting material properties ranging from viscous solutions to gel-like structures in the presence of divalent cations. Bacterial alginates are synthesized by only two bacterial genera, Pseudomonas and Azotobacter, and have been extensively studied over the last 40 years. While primarily synthesized in form of polymannuronic acid, alginate undergoes chemical modifications comprising acetylation and epimerization, which occurs during periplasmic transfer and before final export through the outer membrane. Alginate with its unique material properties and characteristics has been increasingly considered as biomaterial for medical applications. The genetic modification of alginate producing microorganisms could enable biotechnological production of new alginates with unique, tailor-made properties, suitable for medical and industrial applications.     

Elucidation of the structure and characterization of the gene cluster of the O-antigen of Cronobacter sakazakii G2592, the reference strain of C. sakazakii O7 serotype

The O-specific polysaccharide from the lipopolysaccharide of Cronobacter sakazakii G2592 was studied by sugar analysis along with 1D and 2D ¹H and ¹³C NMR spectroscopy, and the following structure of the pentasaccharide repeating unit was established:This structure is unique among the known bacterial polysaccharide structures, which is in accord with classification of strain G2592 into a new C. sakazakii serotype, O7. It is in agreement with the O-antigen gene cluster of this strain, which was found between the housekeeping genes JUMPStart and gnd and characterized by sequencing and tentative assignment of the gene functions.     

The signaling protein MucG negatively affects the production and the molecular mass of alginate in Azotobacter vinelandii

Azotobacter vinelandii is a soil bacterium that produces the polysaccharide alginate. In this work, we identified a miniTn5 mutant, named GG9, which showed increased alginate production of higher molecular mass, and increased expression of the alginate biosynthetic genes algD and alg8 when compared to its parental strain. The miniTn5 was inserted within ORF Avin07920 encoding a hypothetical protein. Avin07910, located immediately downstream and predicted to form an operon with Avin07920, encodes an inner membrane multi-domain signaling protein here named mucG. Insertional inactivation of mucG resulted in a phenotype of increased alginate production of higher molecular mass similar to that of mutant GG9. The MucG protein contains a periplasmic and putative HAMP and PAS domains, which are linked to GGDEF and EAL domains. The last two domains are potentially involved in the synthesis and degradation, respectively, of bis-(3′-5′)-cyclic dimeric GMP (c-di-GMP), a secondary messenger that has been reported to be essential for alginate production. Therefore, we hypothesized that the negative effect of MucG on the production of this polymer could be explained by the putative phosphodiesterase activity of the EAL domain. Indeed, we found that alanine replacement mutagenesis of the MucG EAL motif or deletion of the entire EAL domain resulted in increased alginate production of higher molecular mass similar to the GG9 and mucG mutants. To our knowledge, this is the first reported protein that simultaneous affects the production of alginate and its molecular mass.

     

Construction of an <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> cell-surface display system using a putative GPI-anchored protein

A novel cell-surface display system was constructed in Aspergillus oryzae. Each of the five genes encoding the putative cell-wall-localized protein from the A. oryzae genome was cloned and these cell-surface anchor functions were examined by fusion to the C-terminal of the green fluorescent protein (GFP). Using the MP1 and CWP proteins as anchor proteins, GFP signals were strongly observed on the cell surface of recombinant A. oryzae. When these proteins were used as anchor proteins for cell-surface display of β-glucosidase from A. oryzae, enzyme activity was detected on the cell surface. In particular, β-glucosidase activity of recombinant A. oryzae using MP1, a putative glycosylphosphatidylinositol (GPI) anchor protein was higher than CWP. Based on these results, it was concluded that the MP1 protein can act as a GPI-anchor protein in A. oryzae, and the proposed cell-surface display system using MP1 allows for the display of heterogeneous and endogenous proteins.     

Functional similarities of a thermostable protein-disulfide oxidoreductase identified in the archaeon <Emphasis Type="Italic">Pyrococcus horikoshii</Emphasis> to bacterial DsbA enzymes

We have isolated and characterized a gene for a putative protein-disulfide oxidoreductase (phdsb) in the archaeon Pyrococcus horikoshii. The open reading frame of phdsb encodes a protein of 170 amino acids with an NH₂-terminal extension similar to the bacterial signal peptides. The putative mature region of PhDsb includes a sequence motif, Cys-Pro-His-Cys (CPHC), that is conserved in members of the bacterial DsbA family, but otherwise the archaeal and bacterial sequences do not show substantial similarity. A recombinant protein corresponding to the predicted mature form of PhDsb behaved as a monomer and manifested oxidoreductase activities in vitro similar to those of DsbA of Escherichia coli. The catalytic activity of PhDsb was thermostable and was shown by mutation analysis to depend on the NH₂-terminal cysteine residue of the CPHC motif. Thus, in spite of their low overall sequence similarities, DsbA-like proteins of archaea and bacteria appear to be highly similar in terms of function.     

Sucrose partitioning between vascular bundles and storage parenchyma in the sugarcane stem: a potential role for the ShSUT1 sucrose transporter

A transporter with homology to the SUT/SUC family of plant sucrose transporters was isolated from a sugarcane (Saccharum hybrid) stem cDNA library. The gene, designated ShSUT1, encodes a protein of 517 amino acids, including 12 predicted membrane-spanning domains and a large central cytoplasmic loop. ShSUT1 was demonstrated to be a functional sucrose transporter by expression in yeast. The estimated K_m for sucrose of the ShSUT1 transporter was 2 mM at pH 5.5. ShSUT1 was expressed predominantly in mature leaves of sugarcane that were exporting sucrose and in stem internodes that were actively accumulating sucrose. Immunolocalization with a ShSUT1-specific antiserum identified the protein in cells at the periphery of the vascular bundles in the stem. These cells became lignified and suberized as stem development proceeded, forming a barrier to apoplasmic solute movement. However, the movement of the tracer dye, carboxyfluorescein from phloem to storage parenchyma cells suggested that symplasmic connections are present. ShSUT1 may have a role in partitioning of sucrose between the vascular tissue and sites of storage in the parenchyma cells of sugarcane stem internodes.