Combining structure-based design with phage display to create new Cys(2)His(2) zinc finger dimers

BACKGROUND: Several strategies have been reported for the design and selection of novel DNA-binding proteins. Most of these studies have used Cys(2)His(2) zinc finger proteins as a framework, and have focused on constructs that bind DNA in a manner similar to Zif268, with neighboring fingers connected by a canonical (Krüppel-type) linker. This linker does not seem ideal for larger constructs because only modest improvements in affinity are observed when more than three fingers are connected in this manner. Two strategies have been described that allow the productive assembly of more than three canonically linked fingers on a DNA site: connecting sets of fingers using linkers (covalent), or assembling sets of fingers using dimerization domains (non-covalent). RESULTS: Using a combination of structure-based design and phage display, we have developed a new dimerization system for Cys(2)His(2) zinc fingers that allows the assembly of more than three fingers on a desired target site. Zinc finger constructs employing this new dimerization system have high affinity and good specificity for their target sites both in vitro and in vivo. Constructs that recognize an asymmetric binding site as heterodimers can be obtained through substitutions in the zinc finger and dimerization regions. CONCLUSIONS: Our modular zinc finger dimerization system allows more than three Cys(2)His(2) zinc fingers to be productively assembled on a DNA-binding site. Dimerization may offer certain advantages over covalent linkage for the recognition of large DNA sequences. Our results also illustrate the power of combining structure-based design with phage display in a strategy that assimilates the best features of each method.     

Facilitated diffusion of a DNA binding protein on chromatin.

Facilitated diffusion accounts for the rapid rate of association of many bacterial DNA binding proteins with specific DNA sequences in vitro. In this mechanism the proteins bind at random to non-specific sites on the DAN and diffuse (by 'sliding' or 'hopping') along the DNA chain until they arrive at their specific functional sites. We have investigated whether such a mechanism can operate in chromatin by using a bacterial DNA binding protein, Escherichia coli RNA polymerase, that depends on linear diffusion to locate initiation sites on DNA. We have measured the competition between chromatin and its free DNA for the formation of initiation complexes. Only the short linker segments exposed by the removal of histone H1 are available for interaction with the polymerase, but the sparsely distributed promoter sites on the linker DNA of such a polynucleosome chain are located at the same rate as those on DNA. We conclude that the polymerase is free to migrate between the separate linker DNA segments of a polynucleosome chain to reach a promoter site. This chain thus permits the 'hopping' of proteins between neighboring linker segments in their search for a target site on the accessible DNA.     

A new method for constructing linker scanning mutants.

A new procedure for the construction of linker scanning mutants is described. A plasmid containing the target DNA is randomly linearized and slightly shortened by a novel combination of established methods. After partial apurination with formic acid a specific nick or small gap is introduced at the apurinic site by exonuclease III, followed by nuclease S1 cleavage of the strand opposite the nick/gap. Synthetic linkers are ligated to the ends and plasmids having the linker inserted in the target DNA are enriched. Putative linker scanning mutants are identified by their topoisomer patterns after relaxation with topoisomerase I. This technique allows the distinction of plasmids differing in length by a single basepair. We have used this rapid and efficient strategy to generate a set of 32 linker scanning mutants covering the chicken lysozyme promoter from -208 to +15.     

Distinct DNA elements contribute to Rap1p affinity for its binding sites

The essential Saccharomyces cerevisiae regulatory protein Rap1 contains two tandem Myb-like DNA binding sub-domains that interact with two defined DNA "hemisites", separated by a trinucleotide linker sequence. We have mapped the thermodynamically defined DNA-binding site of Rap1 by a primer extension method coupled with electrophoretic separation of bound and unbound DNAs. Relative to published consensus sequences, we detect binding interactions that extend 3 bp beyond the 5'-end of the putative DNA-binding site. This new site of interaction is located where the DNA minor groove faces the protein, and may account for the major DNA bending induced by Rap1p that previous studies have mapped to a site immediately upstream of the consensus binding site. In addition, we show that a minimal DNA-binding site made of one single consensus hemisite, preceded or followed by a spacer trinucleotide that interacts with the unstructured protein linker between the two Rap1p DNA binding domains, is able to bind the protein, although at lower affinity. These findings may explain the observed in vivo binding properties of Rap1p at many promoters that lack canonical binding sites.     

Subdividing repressor function: DNA binding affinity, selectivity, and allostery can be altered by amino acid substitution of nonconserved residues in a LacI/GalR homologue

Many mutations that impact protein function occur at residues that do not directly contact ligand. To understand the functional contributions from the sequence that links the DNA-binding and regulatory domains of the LacI/GalR homologues, we have created a chimeric protein (LLhP), which comprises the LacI DNA-binding domain, the LacI linker, and the PurR regulatory domain. Although DNA binding site residues are identical in LLhP and LacI, thermodynamic measurements of DNA binding affinity show that LLhP does not discriminate between alternative DNA ligands as well as LacI. In addition, small-angle scattering experiments show that LLhP is more compact than LacI. When DNA is released, LacI shows a 20 A increase in length that was previously attributed to unfolding of the linker. This change is not seen in apo-LLhP, even though the linker sequences of the two proteins are identical. Together, results indicate that long-range functional and structural changes are propagated across the interface that forms between the linker and regulatory domain. These changes could be mediated via the side chains of several linker residues that contact the regulatory domains of the naturally occurring proteins, LacI and PurR. Substitution of these residues in LLhP leads to a range of functional effects. Four variants exhibit altered affinity for DNA, with no changes in selectivity or allosteric response. Another two result in proteins that bind operator DNA with very low affinity and no allosteric response, similar to LacI binding nonspecific DNA sequences. Two more substitutions simultaneously diminish affinity, enhance allostery, and profoundly alter DNA ligand selectivity. Thus, positions within the linker can be varied to modulate different aspects of repressor function.     

Isolation of pathogen-induced Chinese cabbage genes by subtractive hybridization employing selective adaptor ligation

We have developed a subtractive cloning method in which target sequences are effectively enriched by selective adaptor ligation and PCR after hybridization. In this method both tester and driver DNAs are digested with RsaI, ligated with the linker DNA containing a KpnI recognition site, and amplified by PCR. The tester DNA samples are divided into two aliquots, each digested with either RsaI or KpnI. The two DNA samples are then combined and hybridized with an excess of the driver DNA retaining the linker. After hybridization, the DNA mixture is ligated to a new adaptor compatible only with double-stranded tester/tester DNAs. Therefore, only the tester/tester is selectively amplified in subsequent PCR. This also leads to complete elimination of the tester DNA hybridized with driver DNA from the tester DNA population. Although our protocol employs enzymatic treatments, the efficiency of the enzymatic treatments does not affect the subtraction efficiency. This new subtractive enrichment method was applied to isolate Chinese cabbage defense-related genes induced by Pseudomonas syringae pv. tomato (Pst), which elicits a hypersensitive response in Chinese cabbage. After two or three rounds of subtractive hybridization, the sequences of enriched DNAs were determined and examined by BLAST analysis. Northern blot hybridization showed that 12 of the 19 genes analyzed were strongly induced by Pst treatment. Among the 12 Pst-induced genes five represent pathogenesis-related genes encoding PR1a, two chitinases, a thaumatin-like protein, and a PR4 protein. Other Pst-induced genes include two cytochrome P450 genes responsible for glucosinolate biosynthesis, a disease resistance gene homolog, and several genes encoding proteins with unknown functions.     

Nucleotide sequence-directed mapping of the nucleosomes

The concept of sequence-dependent deformational anisotropy of DNA proposed earlier is further elaborated and a computational procedure is developed for the sequence-directed mapping of the nucleosomes along chromatin DNA nucleotide sequences. The deformational anisotropy is found to be nonuniform along the molecule of the nucleosomal DNA, suggesting that the DNA superhelix in the nucleosome is slightly oval rather than circular in projection. The number of superhelical turns in the nucleosome core particle is estimated to be 2.0 +/- 0.2. Preliminary mapping of the nucleosomes in various chromatin DNA sequences yields the distribution of linker lengths which shows several minima separated by about 10 base-pairs. This is explained by sterical exclusion effects due to overlapping of the nucleosomes in space when some specific linker lengths are chosen. The mapping procedure described is tested by comparing its results with all the most accurate experimental mapping data reported so far. The comparison demonstrates that the exact positions of all the nucleosomes appear to be determined exclusively by the nucleotide sequences.     

An efficient protocol for linker scanning mutagenesis: analysis of the translational regulation of an Escherichia coli RNA polymerase subunit gene.

A protocol has been developed that is capable of saturating regions hundreds of basepairs in length with linker scanning mutations. The efficacy of this method stems from the design of the linker scanning mutagenesis (LSM) cassette which is composed of a selectable marker flanked by two oligonucleotides, each of which contains a recognition site for a different restriction endonuclease. The cleavage site for one endonuclease is within its recognition site, while the second endonuclease cleaves in the target DNA beyond the end of the cassette. Digestion with these endonucleases and subsequent ligation results in the replacement of 12 bp of the original target sequence with 12 bp of the linker scanning oligonucleotide. We have used this protocol to mutagenize a span of approximately 400 bp surrounding the start site of the gene for the beta subunit (rpoB) of Escherichia coli RNA polymerase. The translation of the beta mRNA has been shown previously to be regulated by the intracellular concentration of either beta or beta'. Analysis of the linker scanning mutations indicates that sequences extending a considerable distance both upstream and downstream of the start site are required for normal translation. Also a site that appears to be involved in translational repression by excess beta' has been identified.     

Changes in chromatin structure due to hypomethylation induced with 5-azacytidine or DL-ethionine.

Changes in chromatin structure of the HRS60 family of repetitive sequences in tobacco DNA were studied after hypomethylation induced with 5-azacytidine or DL-ethionine. The TaqI site in the HRS60 units lies in nucleosomal core regions and its cleavage is enhanced in the hypomethylated chromatin. In contrast, the cleavage of the Sau3AI site located in linker DNA does not depend on the level of methylation of DNA.     

Formation of MboII vectors and cassettes using asymmetric MboII linkers

Class-IIS restriction endonucleases such as MboII cleave DNA at a specified distance away from their recognition sequences. This feature was exploited to cleave DNA at previously inaccessible locations by preparing special asymmetric linker/adapters containing the MboII recognition sequence. These could be joined to DNA fragments and subsequently cleaved by MboII. Attachment of a 3' phosphate to one of the two different oligodeoxynucleotides comprising the asymmetric duplex prevented ligation at the improper end of the linker. Plasmids were constructed containing a unique BamHI or BclI site between the recognition and cleavage site of MboII. These sites were used to introduce a foreign fragment into the plasmid at a position permitting MboII to cleave within the newly inserted fragment. Once cleaved at the unique MboII site, another DNA fragment was inserted. DNA was thus inserted at a sequence not previously accessible to specific cleavage by a restriction enzyme. A cassette containing an identifiable marker, the lac operator, between two oppositely oriented MboII/BamHI linkers was made and tested in a random insertion linker mutagenesis experiment.     

In vivo topoisomerase II cleavage of the Drosophila histone and satellite III repeats: DNA sequence and structural characteristics.

We have identified two classes of in vivo topoisomerase II cleavage sites in the Drosophila histone gene repeat. One class co-localizes with DNase I-hypersensitive regions and another novel class maps to a subset of consecutive nucleosome linker sites in the scaffold-associated region (SAR) of the histone gene loop. Prominent topoisomerase II cleavage is also observed in one of the linker regions of the two nucleosomes spanning satellite III, a centromeric SAR-like DNA sequence with a repeat length of 359 bp. At the sequence level, in vivo topoisomerase II cleavage is highly site specific. Comparison of 10 nucleosome linker sites defines an in vivo cleavage sequence whose major characteristic is a prominent GC-rich core. These GC-rich cleavage sites are flanked by extensive arrays of oligo(dA).oligo(dT) tracts characteristic of SAR sequences. Treatment of cells with distamycin selectively enhances cleavage at nucleosome linker sites of the SAR and satellite regions, suggesting that AT-rich sequences flanking cleavage sites may be involved in determining topoisomerase II activity in the cell. These observations provide evidence for the association of topoisomerase II with SARS in vivo.     

New cloning vectors and techniques for easy and rapid restriction mapping

We have modified plasmid, phage lambda and cosmid cloning vectors to be of general use for easily and unambiguously determining restriction maps of recombinant DNA molecules. Each vector is constructed so that it contains the rarely found NotI restriction site joined to a short synthetic linker sequence that is followed by a multiple cloning site. DNA cloned into these vectors may be restriction-mapped by either of two methods. In one technique, the cloned DNA is completely digested with NotI, followed by partial digestion with any other restriction enzyme. After electrophoresis and transfer to a nylon membrane, the fragments are hybridized to a labeled probe complementary to the NotI linker. In the second technique, referred to as recession hybridization detection, cloned DNA is digested with NotI and then briefly treated with exonuclease III to recess the 3' ends. After hybridizing a labeled complementary oligodeoxynucleotide to the single-stranded 5' end containing the linker sequence, the DNA is partially digested with another restriction enzyme, electrophoresed and the gel is exposed to x-ray film. With either method the size of each labeled fragment corresponds directly to the distance that a restriction site is located from the NotI linker terminus. Methods for obtaining partial restriction enzyme digests have been devised so that as many as 20 different enzymes may be conveniently mapped on a single gel in little more than a day. The vectors and techniques described may also be adapted to automated or semi-automated devices that read fragment lengths and calculate the resulting restriction map.(ABSTRACT TRUNCATED AT 250 WORDS)     

Psoralen photo-cross-linking by triplex-forming oligonucleotides at multiple sites in the human rhodopsin gene.

Targeting DNA damage by triplex-forming oligonucleotides (TFOs) represents a way of modifying gene expression and structure and a possible approach to gene therapy. We have determined that this approach can deliver damage with great specificity to sites in the human gene for the G-protein-linked receptor rhodopsin, mutations of which can lead to the genetic disorder autosomal dominant retinitis pigmentosa. We have introduced DNA monoadducts and interstrand cross-links at multiple target sites within the gene using TFOs with a photoactivatable psoralen group at the 5'-end. The extent of formation of photoadducts (i.e., monoadducts and cross-links) was measured at target sites with a 5'-ApT sequence at the triplex-duplex junction and at a target site with 5'-ApT and 5'-TpA sequences located four and seven nucleotides away, respectively. To improve psoralen reactivity at more distant sites, psoralen moieties were attached to TFOs with nucleotide "linkers" from two to nine nucleotides in length. High-affinity binding was maintained with linkers of up to 10 nucleotides, but affinities tended to decrease somewhat with increasing linker length due to faster dissociation kinetics. DNase I footprinting indicated little, if any, interaction between linkers and the duplex. Psoralen-TFO conjugates formed DNA cross-links with high efficiency (56-65%) at 5'-ApT sequences located at triplex junctions. At a 5'-ApT site four nucleotides away, the efficiency varied with linker length; a four-nucleotide linker gave the highest efficiency. Duplexes with 5'-TpA and 5'-ApT sites two nucleotides away, in otherwise identical sequences, were cross-linked with efficiencies of 56 and 38%, respectively. These results indicate that TFO-linker-psoralen conjugates allow simultaneous, efficient targeting of multiple sites in the human rhodopsin gene.     

Site-specific DNA splicing: a general procedure for the creation of a restriction site at a predetermined position in a DNA sequence

A method is described for creating any of a wide array of restriction sites at a predetermined position in a known DNA sequence. The method utilizes the exonuclease activity of BAL 31 and a specially designed bifunctional oligodeoxynucleotide linker. The desired restriction site is generated when the linker is ligated to those BAL 31-digested DNA fragments which end with the target sequence. The proper ligation product is then identified by a highly specific hybridization procedure. The method is versatile and specific and is especially useful in the isolation of functional elements of a gene.     

A new high-capacity cosmid vector and its use

The construction of a cosmid, MUA-3, designed for the convenient cloning of eukaryotic DNA segments up to 48 kb in length is described. The cosmid contains all of the plasmid pBR322 with approx. 400 bases of lambda DNA, including the cohesive end site, inserted at the pBR322 PstI endonuclease recognition site. Methods for using this vector to construct several types of Drosophila melanogaster genomic DNA libraries are given, and libraries made by these methods are characterized. A sheared Drosophila DNA-EcoRI linker library is shown to stably maintain average Drosophila DNA inserts of over 40 kb and up to 48 kb, and the efficiency of producing clones by a partial restriction and ligation method is shown to be over 3 X 10(5) clones/microgram of Drosophila DNA.