Analysis of the formation mechanism for thermoresponsive-type coacervate with functional copolymers consisting of N-isopropylacrylamide and 2-hydroxyisopropylacrylamide

We now report the formation mechanism of the thermoresponsive-type coacervate with the novel functional temperature-sensitive polymer, poly(N-isopropylacrylamide-co-2-hydroxyisopropylacrylamide) (poly(NIPAAm-co-HIPAAm)), synthesized in our laboratory. The effects of introducing the hydrophilic comonomer (HIPAAm) into the copolymer chains and adding salts on the behaviors of the coacervate droplets induced in the poly(NIPAAm-co-HIPAAm) aqueous solutions were investigated. Not only the particle sizes of the coacervate droplets but also the cloud points of the copolymer solutions could be modulated by the HIPAAm content incorporated in the copolymers. Moreover, the particle sizes of the coacervate droplets were also changed by adding salts. Namely, the particle sizes increased with the decreasing HIPAAm composition and increasing NaCl concentration. In addition, the 1H NMR and differential scanning calorimetric measurements suggested that as the HIPAAm content decreased or NaCl concentration increased, dehydration of the copolymers induced in the phase transition and/or separation became much easier. Therefore, on the basis of the findings obtained from these measurements, we determined that the particle sizes of the coacervate droplets induced in the temperature-sensitive polymers increased as the number of the water molecules, which are dissociated from the polymeric chains during the phase transition and/or separation, increased. Besides, to examine the separation of the model solutes, the aqueous two-phase separation with the coacervate droplets of poly(NIPAAm-co-HIPAAm) was carried out. The partitions of Methyl Orange as a model solute under both acidic (pH 2) and basic (pH 12) conditions were performed. The amount of Methyl Orange partitioned into the coacervate droplets at pH 12 is much greater than that at pH 2, which indicated that the coacervate droplets could recognize a slight difference in the polarity or structure between the model solutes.     

Active accumulation of gold nanorods in tumor in response to near-infrared laser irradiation

Gold nanorods, rod-shaped gold nanoparticles, have strong absorbance in the near-infrared region, and the absorbed light energy can be converted to heat, the so-called photothermal effect. The gold nanorods were coated with thermoresponsive polymers, which have different phase transition temperatures that were controlled by adding comonomers, N,N-dimethylacrylamide (DMAA) or acrylamide (AAm) to N-isopropylacrylamide (NIPAM). The phase transition temperatures of poly(NIPAM-DMAA) and poly(NIPAM-AAm)-coated gold nanorods were 38 and 41 °C, respectively, while polyNIPAM-coated gold nanorods showed phase transition at 34 °C. Irradiation of the coated gold nanorods using the near-infrared laser induced a decrease in their sizes due to a phase transition of the polymer layers. Poly(NIPAM-AAm)-coated gold nanorods stably circulated in the blood flow without a phase transition after intravenous injection. Irradiation of near-infrared light at a tumor after the injection resulted in the gold specifically accumulating in the tumor. This novel accumulation technique which combines a thermoresponsive polymer and the photothermal effect of the gold nanorods should be a powerful tool for targeted delivery in response to light irradiation.     

Lipase-catalyzed copolymerization of omega-pentadecalactone with p-dioxanone and characterization of copolymer thermal and crystalline properties

Candida antarctica Lipase B (CALB), a metal-free enzyme, was successfully employed as catalyst for ring-opening copolymerization of omega-pentadecalactone (PDL) with p-dioxanone (DO) under mild reaction conditions (<80 degrees C, atmospheric pressure). Poly(PDL-co-DO) with high molecular weight (Mw > 30 000) and a wide range of comonomer contents was synthesized using various PDL/DO feed ratios. During the copolymerization reaction, large ring PDL was found to be more reactive than its smaller counterpart DO, resulting in higher PDL/DO unit ratios in polymer chains than the corresponding PDL/DO monomer ratios in the feed. The copolymers were typically isolated in 50-90 wt % yields as the monomer conversion was limited by the equilibrium between monomers and copolymer. 1H and 13C NMR analysis on poly(PDL-co-DO) formed by CALB showed that the copolymers contain nearly random sequences of PDL and DO units with a slight tendency toward alternating arrangements. Copolymerization with PDL was found to remarkably enhance PDO thermal stability. Differential scanning calorimetry (DSC) and wide-angle X-ray scattering (WAXS) results demonstrate high crystallinity in all copolymers over the whole range of compositions. Depending on copolymer composition, the crystal lattice of either PDO or PPDL hosts units of the other comonomer, a behavior typical of an isodimorphic system. In poly(PDL-co-DO), both melting temperature and melting enthalpy display a minimum at 70 mol % DO, that is, at the pseudoeutectic composition. WAXS diffractograms show one crystal phase (that of either PPDL or PDO) on either side of the pseudoeutectic and coexistence of PPDL and PDO crystals at the pseudoeutectic.     

Polymer terminal group effects on properties of thermoresponsive polymeric micelles with controlled outer-shell chain lengths

Well-defined amphiphilic diblock copolymers comprising thermoresponsive polymer segments of poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) (PID) and hydrophobic polymer segments, poly(benzyl methacrylate) (PBzMA), were synthesized by controlled living radical polymerization. Terminal derivatization of PID segments to either hydroxyl or phenyl groups was achieved through reactions of coupling agents with thiol groups exposed by cleavage of terminal dithiobenzoate groups. Diblock copolymers formed core-shell type polymeric micelles with thermoresponsive outer shells. Hydrodynamic micellar diameters ranged from 12 to 31 nm, controlled by varying PID chain lengths. Differences in PID terminal groups did not affect the critical micelle concentration or micellar diameters. However, these groups demonstrated a significant influence on the micellar thermoresponses. Hydroxylated PID/PBzMA micelles exhibited a phase transition of approximately 40 degrees C, independent of PID molecular weights. Even though molecular weights and compositions of PID chains were equivalent except for terminal groups, micelles having the outermost surface phenyl groups exhibited drastically lower phase transition temperature shifts, especially for micelles with low molecular weight PID chains.     

Sequence-specific affinity precipitation of oligonucleotide using poly(N-isopropylacrylamide)-oligonucleotide conjugate

In this study we develop a sequence-specific precipitation separation system of oligonucleotide (ODN) using a conjugate between poly(N-isopropylacrylamide) (PNIPAM) and ODN. PNIPAM is known as a thermoresponsive polymer and dehydrates to precipitate above its phase transition temperature in an aqueous milieu. The principal advantage of this separation system using the conjugate is that the hybridization reaction between the conjugate and oligonucleotide is conducted in homogeneous solution. The conjugate was prepared by copolymerization between N-isopropylacrylamide and a vinyl-derivatized (dT)(8). The obtained conjugate efficiently precipitated (dA)(8) from solution when the solution contained more than 1.5 M NaCl. The conjugate containing 3 nmol of (dT)(8) residue was able to precipitate 1.4 nmol of (dA)(8), suggesting that the (dT)(8) residue of the conjugate formed a triple helix with (dA)(8). From an equimolar mixture of (dA)(8) and its one point mutant, the conjugate selectively precipitated (dA)(8): the highest selectivity was obtained for the isolation of (dA)(8) from the mixture consisting of (dA)(4)dT(dA)(3) and (dA)(8). When the conjugate was applied for the precipitation of five oligo(dA)s having different chain lengths, the longer oligo(dA)s tended to be precipitated by the conjugate more efficiently than the shorter ones. The conjugate could be used repeatedly for precipitation of (dA)(8) without showing any loss in precipitation efficiency.     

Synthesis, characterization, and gene transfer application of poly(ethylene glycol-b-ethylenimine) with high molar mass polyamine block

The study of ethyloxazoline/methyloxazoline (EtOXZ/MeOXZ) copolymerization, initiated by methyl tosylate (MeOTs), showed that (i) incorporation of MeOXZ units into random copolymer becomes effective over DP = 100 and (ii) propagation process proceeds with negligible transfer to monomer up to a DP of 400 despite the presence of MeOXZ in the polymerization medium. These results produced random poly(EtOXZ-co-MeOXZ) copolymers with various molar composition ratios in alkyloxazoline units. The close values found for the comonomer reactivity ratios in acetonitrile (r(1MeOXZ) = 1.18; r(2EtOXZ) = 0.34) implied a random chain organization in short sequences of each repeating unit, which was an important parameter in view of the optimization of their subsequent modification: the alkaline hydrolysis was successfully achieved when the MeOXZ unit content of the polyoxazoline chains reached 75%. Using these results, the diblock copolymer poly(ethylene glycol-b-(ethyloxazoline-co-methyloxazoline)) (poly(EG-b-(EtOXZ-co-MeOXZ))) with high DP was synthesized by cationic copolymerization of EtOXZ/MeOXZ comonomers using CH(3)-PEG(2kDa)-Ts as macroinitiator. The comonomer composition of this new compound was adjusted in order to optimize the hydrolysis step and obtain finally the diblock copolymer poly(ethylene glycol-b-ethylenimine) (poly(EG-b-EI)). The high molar mass of this copolymer was confirmed both by (1)H NMR and SANS measurements. Gene delivery experiments showed that the copolymer has significant DNA transfection capacities.     

Copolymerization of 2-carboxyisopropylacrylamide with N-isopropylacrylamide accelerates cell detachment from grafted surfaces by reducing temperature

Acrylic acid (AAc) has been utilized to introduce reactive carboxyl groups to a temperature-responsive polymer, poly(N-isopropylacrylamide) (PIPAAm). However, AAc introduction shifts the copolymer phase transition temperatures higher and dampens the steep homopolymer phase transition with increasing AAc content. We previously synthesized 2-carboxyisopropylacrylamide (CIPAAm) having both a similar side chain structure to IPAAm and a functional carboxylate group in order to overcome these shortcomings. In the present study, these copolymers, grafted onto cell culture plastic, were assessed for cell adhesion control using their phase transition. AAc introduction to PIPAAm-grafted surfaces resulted in excessive surface hydration and hindered cell spreading in culture at 37 degrees C. In contrast, CIPAAm-containing copolymer-grafted surfaces exhibited relatively weak hydrophobicity similar to both homopolymer PIPAAm-grafted surfaces as well as commercial ungrafted tissue culture polystyrene dish surfaces. Cells adhered and spread well on these surfaces at 37 degrees C in culture. As observed previously on PIPAAm-grafted surfaces, cells were spontaneously detached from the copolymer-grafted surfaces by reducing culture temperature. Cell detachment was accelerated on the CIPAAm copolymer-grafted surfaces compared to pure IPAAm surfaces, suggesting that hydrophilic carboxyl group microenvironment in the monomer and polymer is important to accelerate grafted surface hydration below the lower critical solution temperature, detaching cells.     

Physicochemical characterization of thermoresponsive poly(N-isopropylacrylamide)-poly(ethylene imine) graft copolymers

Synthetic polycations have shown promise as gene delivery vehicles but suffer from an unacceptable toxicity and low transfection efficiency. Novel architectures are being explored to increase transfection efficiency, including copolymers with a thermoresponsive character. The physicochemical characterization of a family of copolymers comprising a core of the cationic polymer poly(ethylene imine) (PEI) with differing thermoresponsive poly( N-isopropylacrylamide) (PNIPAM) grafts has been carried out using pulsed-gradient spin-echo NMR (PGSE-NMR) and small-angle neutron scattering (SANS). For the copolymers that have longer chain PNIPAM grafts, there is clear evidence of the collapse of the grafts with increasing temperature and the associated emergence of an attractive interpolymer interaction. These facets depend on the number of PNIPAM grafts attached to the PEI core. While a collapse in the smaller PNIPAM grafts is observed for the third polymer, there is no appearance of the interpolymer attractive interaction. These observations provide further insight into the association behavior of these copolymers, which is fundamental to developing a full understanding of how they interact with nucleic acids. Furthermore, the differing behaviors of the three copolymers over temperatures in which the PNIPAM blocks undergo coil-to-globule transitions is indicative of changes in the presentation of charged-core and hydrophobic chain components, which are key factors affecting nucleic acid binding and, ultimately, cell transfection ability.     

Controllable Stabilization of Poly(N-isopropylacrylamide)-Based Microgel Films through Biomimetic Mineralization of Calcium Carbonate

Two types of thermoresponsive microgels, poly(N-isopropylacrylamide) (PNIPAM) microgels and poly(N-isopropylacrylamide-co-acrylic acid) (PNIPAMAC) microgels were synthesized and used as templates for the mineralization of amorphous calcium carbonate (ACC) by diffusion of CO(2) vapor under ambient conditions. Thermosensitive PNIPAM/CaCO(3) hybrid macroscopic hydrogels and micrometer-sized PNIPAMAC/CaCO(3) hybrid microgels were controllably obtained and different mineralization mechanistic processes were proposed. The impact of the loaded CaCO(3) on the size, morphology, stability, and thermosensitivity of the microgels was also analyzed. PNIPAM/CaCO(3) hybrid macrogels had a slight decrease in thermoresponsive phase transition temperature, while PNIPAMAC/CaCO(3) hybrid microgels showed a clear increase in phase transition temperature. The difference reflected different amount and location of ACC in the gel network, causing different interactions with polymer chains. The PNIPAMAC/CaCO(3) microgels formed stable monolayer films on bare silica wafers and glass coverslips upon drying. The microgel films could facilitate the attachment and growth of 3T3 fibroblast cells and their subsequent detachment upon temperature drop from 37 °C to the ambient condition around 20 °C, thus, offering a convenient procedure for cell harvesting.     

Comparison of cultured cell attachment on a temperature-responsive polymer,poly-l-lysine,and collagen using modeling curves and a thermal-controlled quartz crystal microbalance

Journal of Biological Physics - The characteristics of cultured cell attachment onto poly-l-lysine (PLL), collagen, and the thermoresponsive polymer poly(N-isopropylacrylamide) (PNIPAM) were...     

Synthesis of amphiphilic tadpole-shaped linear-cyclic diblock copolymers via ring-opening polymerization directly initiating from cyclic precursors and their application as drug nanocarriers

We report on the facile synthesis of well-defined amphiphilic and thermoresponsive tadpole-shaped linear-cyclic diblock copolymers via ring-opening polymerization (ROP) directly initiating from cyclic precursors, their self-assembling behavior in aqueous solution, and the application of micellar assemblies as controlled release drug nanocarriers. Starting from a trifunctional core molecule containing alkynyl, hydroxyl, and bromine moieties, alkynyl-(OH)-Br, macrocyclic poly(N-isopropylacrylamide) (c-PNIPAM) bearing a single hydroxyl functionality was prepared by atom transfer radical polymerization (ATRP), the subsequent end group transformation into azide functionality, and finally the intramacromolecular ring closure reaction via click chemistry. The target amphiphilic tadpole-shaped linear-cyclic diblock copolymer, (c-PNIPAM)-b-PCL, was then synthesized via the ROP of ε-caprolactone (CL) by directly initiating from the cyclic precursor. In aqueous solution at 20 °C, (c-PNIPAM)-b-PCL self-assembles into spherical micelles consisting of hydrophobic PCL cores and well-solvated coronas of cyclic PNIPAM segments. For comparison, linear diblock copolymer with comparable molecular weight and composition, (l-PNIPAM)-b-PCL, was also synthesized. It was found that the thermoresponsive coronas of micelles self-assembled from (c-PNIPAM)-b-PCL exhibit thermoinduced collapse and aggregation at a lower critical thermal phase transition temperature (T(c)) compared with those of (l-PNIPAM)-b-PCL. Temperature-dependent drug release profiles from the two types of micelles of (c-PNIPAM)-b-PCL and (l-PNIPAM)-b-PCL loaded with doxorubicin (Dox) were measured, and the underlying mechanism for the observed difference in releasing properties was proposed. Moreover, MTT assays revealed that micelles of (c-PNIPAM)-b-PCL are almost noncytotoxic up to a concentration of 1.0 g/L, whereas at the same polymer concentration, micelles loaded with Dox lead to ～60% cell death. Overall, chain topologies of thermoresponsive block copolymers, that is, (c-PNIPAM)-b-PCL versus (l-PNIPAM)-b-PCL, play considerable effects on the self-assembling and thermal phase transition properties and their functions as controlled release drug nanocarriers.     

Micropatterned thermoresponsive polymer brush surfaces for fabricating cell sheets with well-controlled orientational structures

Newly developed fabrication technique of thermoresponsive surface using RAFT-mediated block copolymerization and photolithography achieved stripe-like micropatterning of poly(N-isopropylacrylamide) (PIPAAm) brush domains and poly(N-isopropylacrylamide)-b-poly(N-acryloylmorpholine) domains. Normal human dermal fibroblasts were aligned on the physicochemically patterned surfaces simply by one-pot cell seeding. Fluorescence images showed the well-controlled orientation of actin fibers and fibronectin in the confluent cell layers with associated extracellular matrix (ECM) on the surfaces. Furthermore, the aligned cells were harvested as a tissue-like cellular monolayer, called "cell sheet" only by reducing temperature below PIPAAm's lower critical solution temperature (LCST) to 20 °C. The cell sheet harvested from the micropatterned surface possessed a different shrinking rate between vertical and parallel sides of the cell alignment (approximately 3:1 of aspect ratio). This indicates that the cell sheet maintains the alignment of cells and related ECM proteins, promising to show the mechanical and biological aspects of cell sheets harvested from the functionalized thermoresponsive surfaces.     

Lipase-catalyzed copolymerization of dialkyl carbonate with 1,4-butanediol and ω-pentadecalactone: synthesis of poly(ω-pentadecalactone-co-butylene-co-carbonate)

Candida antarctica lipase B (CALB) was successfully used to promote synthesis of aliphatic poly(carbonate-co-ester) copolymers from dialkyl carbonate, diol, and lactone monomers. The polymerization reactions were carried out in two stages: first-stage oligomerization under low vacuum, followed by second-stage polymerization under high vacuum. Therefore, copolymerization of ω-pentadecalactone (PDL), diethyl carbonate (DEC), and 1,4-butanediol (BD) yielded PDL-DEC-BD copolymers with a M(w) of whole product (nonfractionated) up to 33?000 and M(w)/M(n) between 1.2 and 2.3. Desirable reaction temperature for the copolymerization was found to be ～80 °C. The copolymer compositions, in the range from 10 to 80 mol % PDL unit content versus total (PDL + carbonate) units, were effectively controlled by adjusting the monomer feed ratio. Reprecipitation in chloroform/methanol mixture allowed isolation of the purified copolymers in up to 92% yield. (1)H and (13)C NMR analyses, including statistical analysis on repeat unit sequence distribution, were used to determine the polymer microstructures. The synthesized PDL-DEC-BD copolymers possessed near random structures with all possible combinations of PDL, carbonate, and butylene units via either ester or carbonate linkages in the polymer chains and are more appropriately named as poly(PDL-co-butylene-co-carbonate).     

Correlation between the sequence-length distribution and structure of statistical copolymers of L-valine and γ-benzyl-L-glutamate

Statistical copolymers were prepared from N-carboxyanhydrides of L -valine and γ-benzyl-L -glutamate in dioxan with triethylamine as an initiator. The copolymerization conversion was determined by ir spectroscopy, the copolymer composition by amino acid analysis, and the molecular weights by light scattering. The monomer reactivity ratios were found to be r_Val = 0.14 and r_Glu(OBzl) = 6.4. High-molecular-weight copolymers are formed even at low conversions. The content of β-structure in the copolymers was estimated from the ir spectra in copolymerization mixtures. The sequence-length distribution of L -valine and γ-benzyl-L -glutamate copolymers was calculated and its dependence on copolymerization conversion is discussed. Relations between the sequence-length distribution and the content of β-structure were studied. It was found that the content of β-structure in samples with the same composition is different for low- and high-conversion copolymers. The formation of β-structure in copolymers in the copolymerization mixture requires a certain minimal sequence length, which has been found to be about 6 valine units.     

Thermoreversible hydrogels from RAFT-synthesized BAB triblock copolymers: steps toward biomimetic matrices for tissue regeneration

Narrowly dispersed, temperature-responsive BAB block copolymers capable of forming physical gels under physiological conditions were synthesized via aqueous reversible addition fragmentation chain transfer (RAFT) polymerization. The use of a difunctional trithiocarbonate facilitates the two-step synthesis of BAB copolymers with symmetrical outer blocks. The outer B blocks of the triblock copolymers consist of poly(N-isopropylacrylamide) (PNIPAM) and the inner A block consists of poly(N,N-dimethylacrylamide). The copolymers form reversible physical gels above the phase transition temperature of PNIPAM at concentrations as low as 7.5 wt % copolymer. Mechanical properties similar to collagen, a naturally occurring polypeptide used as a three-dimensional in vitro cell growth scaffold, have been achieved. Herein, we report the mechanical properties of the gels as a function of solvent, polymer concentration, and inner block length. Structural information about the gels was obtained through pulsed field gradient NMR experiments and confocal microscopy.     

Enzymatic synthesis and characterization of novel biodegradable copolymers of 5-benzyloxy-trimethylene carbonate with 1,4-dioxan-2-one

Enzymatic ring-opening copolymerization of 5-benzyloxy-trimethylene carbonate (BTMC) and 1,4-dioxan-2-one (DON) was investigated for the first time. Immobilized porcine pancreas lipase (IPPL) on silica particles was selected to perform the copolymerization. A series of novel biodegradable copolymers with different compositions were characterized by (1)H NMR, (13)C NMR, and GPC. The influences of reaction conditions such as polymerization time and catalyst concentration on the yield and molecular weight of the copolymers were also studied. The copolymerizations of different monomer feed ratios were carried out in bulk at 150 degrees C with 4.5 wt per thousand IPPL as a catalyst for 24 h. With the increase of the BTMC molar feed ratio from 20% to 79%, the M(n) of the resulting copolymers increased from 5600 to 63400. Water uptake and static contact angle experiments showed that the hydrophilicity of copolymers could be improved with increasing DON content in the copolymers. Moreover, the in vitro drug release rate (ibuprofen as the model drug) of the resulting copolymers also increased along with the DON content in the copolymers.     

Enhanced gene expression through temperature profile-induced variations in molecular architecture of thermoresponsive polymer vectors

BACKGROUND: Successful non-viral gene targeting requires vectors to meet two conflicting needs-strong binding to protect the genetic material during transit and weak binding at the target site to enable release. Responsive polymers could fulfil such requirements through the switching of states, e.g. the chain-extended coil to chain-collapsed globule phase transition that occurs at a lower critical solution temperature (LCST), in order to transport nucleic acid in one polymer state and release it in another. METHODS: The ability of new synthetic polycations based on poly(ethyleneimine) (PEI) with grafted neutral responsive poly(N-isopropylacrylamide) (PNIPAm) chains to condense DNA into particles with architectures varying according to graft polymer LCST was assessed using a combination of fluorescence spectroscopy, dynamic light scattering (DLS), zeta sizing, gel retardation and atomic force microscopy studies. Transfection assays were conducted under experimental conditions wherein the polymer components were able to cycle across their LCST. RESULTS: Two PEI-PNIPAm conjugate polymers with different LCSTs displayed coil-globule transitions when complexed to plasmid DNA, leading to variations in molecular architecture as shown by changes in emission maxima of an environment-sensitive fluorophore attached to the PNIPAm chains. Gel retardation assays demonstrated differences in electrophoretic mobilities of polymer-DNA complexes with temperatures below and above polymer LCSTs. Atomic force micrographs showed changes in the structures of polymer-DNA complexes for a polymer undergoing a phase transition around body temperature but not for the polymer with LCST outside this range. Transfection experiments in C2C12 and COS-7 cells demonstrated that the highest expression of transgene occurred in an assay that involved a 'cold-shock' below polymer LCST during transfection. CONCLUSIONS: Designed changes in thermoresponsive polycation vector configuration via temperature-induced phase transitions enhanced transgene expression. The results indicate that changes in molecular architecture induced by a carefully chosen stimulus during intracellular trafficking can be used to enhance gene delivery.     

Synthesis of copolymers containing an active ester of methacrylic acid by RAFT: controlled molecular weight scaffolds for biofunctionalization

We report the controlled radical copolymerization of N-(2-hydroxypropyl)methacrylamide (HPMA) with a monomer containing an active ester, N-methacryloyloxysuccinimide (NMS), by reversible addition fragmentation chain transfer (RAFT). The large difference in the reactivity ratios of HPMA and NMS resulted in significant variations in copolymer composition with increasing conversion during batch copolymerization. The use of a semi-batch copolymerization method, involving the gradual addition of the more reactive NMS, allowed uniformity of copolymer composition to be maintained during the polymerization. We synthesized polymers in a wide range of molecular weights (M(n) = 3000-50,000 Da) with low polydispersities (1.1-1.3). The effect of the ratio of monomer to chain transfer agent (CTA) on the molecular weight of the polymer was investigated. Given the numerous applications of poly(HPMA)-based conjugates in designing polymeric therapeutics, these controlled molecular weight activated polymers represent attractive scaffolds for biofunctionalization. As a demonstration, we attached a peptide to the activated polymer backbone to synthesize a potent controlled molecular weight polyvalent inhibitor of anthrax toxin.     

Aqueous polymer two-phase systems formed by new thermoseparating polymers

A set of new polymers that can be used as phase forming components in aqueous two-phase systems is presented. All polymers studied have thermoseparating properties i.e. form one separate polymer enriched phase and one aqueous solution when heated above the critical temperature. This property makes the polymers attractive alternatives to the polymers used in traditional aqueous two-phase systems such as poly(ethylene glycol) (PEG) and dextran. The thermal phase separation simplifies recycling of the polymers, thus making the aqueous two-phase systems more cost efficient and suitable for use in large scale. Thermoseparating polymers studied have been copolymers of ethylene oxide and propylene oxide (EO-PO), poly (N-isopropylacrylamide) (poly-NIPAM), poly vinyl caprolactam (poly-VCL) and copolymers of N-isopropylacrylamide and vinyl caprolactam with vinyl imidazole (poly(NIPAM-VI) and poly(VCL-VI), respectively). In addition, the copolymer poly(NIPAM-VI) has the property to be uncharged at pH above 7.0 and positively charged at lower pH. This allows the partitioning of protein to be directed by changing the pH in the system instead of the traditional addition of salt to direct the partitioning. Hydrophobically modified EO-PO copolymer (HM-(EO-PO)) with alkyl groups (C₁₄) at both ends forms two-phase system with for example poly(NIPAM-VI). The phase diagram for poly(NIPAM-VI)/HM-(EO-PO) was determined and the model proteins lysozyme and BSA were partitioned in this system. For BSA in poly(NIPAM-VI)/HM-(EO-PO) system a change in pH from 8.0 to 5.4 results in a change of partition coefficient from K=0.8 to K=5.1, i.e. BSA could be transferred from the HM-(EO-PO) phase to the poly(NIPAM-VI) phase. BSA partitioning in poly(NIPAM-VI)/HM-(EO-PO) system allows quantitative BSA recovery, and recoveries of poly(NIPAM-VI) and HM-(EO-PO) were 53% and 92%, respectively, after the thermoseparation step.     

Synthesis of temperature-responsive heterobifunctional block copolymers of poly(ethylene glycol) and poly(N-isopropylacrylamide)

Heterobifunctional block copolymers of poly(ethylene glycol) (PEG) and poly(N-isopropylacrylamide) (PNIPAM) were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization of NIPAM using a macromolecular trithiocarbonate PEG-based chain transfer agent. The polymerization showed all the expected features of living radical polymerization and allowed the synthesis of copolymers with different lengths of the PNIPAM block. The synthesized block copolymers contained a carboxylic acid group from L-lysine at the focal point and a trithiocarbonate group at the terminus of the PNIPAM block. The trithiocarbonate functionality was converted into a thiol group and used for conjugation of biotin to the end of the PNIPAM block. The copolymers exhibited temperature-dependent association behavior in aqueous solution with a phase transition of approximately 32 degrees C. The described heterobifunctional block copolymers show promise for surface modifications with the potential for stimulus-controlled surface presentation of ligands attached to the terminus of the PNIPAM block.