Mechanisms of polyelectrolyte enhanced surfactant adsorption at the air-water interface

Chitosan, a naturally occurring cationic polyelectrolyte, restores the adsorption of the clinical lung surfactant Survanta to the air-water interface in the presence of albumin at much lower concentrations than uncharged polymers such as polyethylene glycol. This is consistent with the positively charged chitosan forming ion pairs with negative charges on the albumin and lung surfactant particles, reducing the net charge in the double-layer, and decreasing the electrostatic energy barrier to adsorption to the air-water interface. However, chitosan, like other polyelectrolytes, cannot perfectly match the charge distribution on the surfactant, which leads to patches of positive and negative charge at net neutrality. Increasing the chitosan concentration further leads to a reduction in the rate of surfactant adsorption consistent with an over-compensation of the negative charge on the surfactant and albumin surfaces, which creates a new repulsive electrostatic potential between the now cationic surfaces. This charge neutralization followed by charge inversion explains the window of polyelectrolyte concentration that enhances surfactant adsorption; the same physical mechanism is observed in flocculation and re-stabilization of anionic colloids by chitosan and in alternate layer deposition of anionic and cationic polyelectrolytes on charged colloids.     

Molecular weight dependence of the depletion attraction and its effects on the competitive adsorption of lung surfactant

Albumin competes with lung surfactant for the air-water interface, resulting in decreased surfactant adsorption and increased surface tension. Polyethylene glycol (PEG) and other hydrophilic polymers restore the normal rate of surfactant adsorption to the interface, which re-establishes low surface tensions on compression. PEG does so by generating an entropic depletion attraction between the surfactant aggregates and interface, reducing the energy barrier to adsorption imposed by the albumin. For a fixed composition of 10 g/L (1% wt.), surfactant adsorption increases with the 0.1 power of PEG molecular weight from 6 kDa-35 kDa as predicted by simple excluded volume models of the depletion attraction. The range of the depletion attraction for PEG with a molecular weight below 6 kDa is less than the dimensions of albumin and there is no effect on surfactant adsorption. PEG greater than 35 kDa reaches the overlap concentration at 1% wt. resulting in both decreased depletion attraction and decreased surfactant adsorption. Fluorescence images reveal that the depletion attraction causes the surfactant to break through the albumin film at the air-water interface to spread as a monolayer. During this transition, there is a coexistence of immiscible albumin and surfactant domains. Surface pressures well above the normal equilibrium surface pressure of albumin are necessary to force the albumin from the interface during film compression.     

X-Ray Diffraction and Reflectivity Validation of the Depletion Attraction in the Competitive Adsorption of Lung Surfactant and Albumin

Lung surfactant (LS) and albumin compete for the air-water interface when both are present in solution. Equilibrium favors LS because it has a lower equilibrium surface pressure, but the smaller albumin is kinetically favored by faster diffusion. Albumin at the interface creates an energy barrier to subsequent LS adsorption that can be overcome by the depletion attraction induced by polyethylene glycol (PEG) in solution. A combination of grazing incidence x-ray diffraction (GIXD), x-ray reflectivity (XR), and pressure-area isotherms provides molecular-resolution information on the location and configuration of LS, albumin, and polymer. XR shows an average electron density similar to that of albumin at low surface pressures, whereas GIXD shows a heterogeneous interface with coexisting LS and albumin domains at higher surface pressures. Albumin induces a slightly larger lattice spacing and greater molecular tilt, similar in effect to a small decrease in the surface pressure. XR shows that adding PEG to the LS-albumin subphase restores the characteristic LS electron density profile at the interface, and confirms that PEG is depleted near the interface. GIXD shows the same LS Bragg peaks and Bragg rods as on a pristine interface, but with a more compact lattice corresponding to a small increase in the surface pressure. These results confirm that albumin adsorption creates a physical barrier that inhibits LS adsorption, and that PEG in the subphase generates a depletion attraction between the LS aggregates and the interface that enhances LS adsorption without substantially altering the structure or properties of the LS monolayer.     

Inhibition of pulmonary surfactant adsorption by serum and the mechanisms of reversal by hydrophilic polymers: theory

A theory based on the Smolukowski analysis of colloid stability shows that the presence of charged, surface-active serum proteins at the alveolar air-liquid interface can severely reduce or eliminate the adsorption of lung surfactant from the subphase to the interface, consistent with the observations reported in the companion article (pages 1769-1779). Adding nonadsorbing, hydrophilic polymers to the subphase provides a depletion attraction between the surfactant aggregates and the interface, which can overcome the steric and electrostatic resistance to adsorption induced by serum. The depletion force increases with polymer concentration as well as with polymer molecular weight. Increasing the surfactant concentration has a much smaller effect than adding polymer, as is observed. Natural hydrophilic polymers, like the SP-A present in native surfactant, or hyaluronan, normally present in the alveolar fluids, can enhance adsorption in the presence of serum to eliminate inactivation.     

Overcoming rapid inactivation of lung surfactant: Analogies between competitive adsorption and colloid stability

Lung surfactant (LS) is a mixture of lipids and proteins that line the alveolar air-liquid interface, lowering the interfacial tension to levels that make breathing possible. In acute respiratory distress syndrome (ARDS), inactivation of LS is believed to play an important role in the development and severity of the disease. This review examines the competitive adsorption of LS and surface-active contaminants, such as serum proteins, present in the alveolar fluids of ARDS patients, and how this competitive adsorption can cause normal amounts of otherwise normal LS to be ineffective in lowering the interfacial tension. LS and serum proteins compete for the air-water interface when both are present in solution either in the alveolar fluids or in a Langmuir trough. Equilibrium favors LS as it has the lower equilibrium surface pressure, but the smaller proteins are kinetically favored over multi-micron LS bilayer aggregates by faster diffusion. If albumin reaches the interface, it creates an energy barrier to subsequent LS adsorption that slows or prevents the adsorption of the necessary amounts of LS required to lower surface tension. This process can be understood in terms of classic colloid stability theory in which an energy barrier to diffusion stabilizes colloidal suspensions against aggregation. This analogy provides qualitative and quantitative predictions regarding the origin of surfactant inactivation. An important corollary is that any additive that promotes colloid coagulation, such as increased electrolyte concentration, multivalent ions, hydrophilic non-adsorbing polymers such as PEG, dextran, etc. added to LS, or polyelectrolytes such as chitosan, also promotes LS adsorption in the presence of serum proteins and helps reverse surfactant inactivation. The theory provides quantitative tools to determine the optimal concentration of these additives and suggests that multiple additives may have a synergistic effect. A variety of physical and chemical techniques including isotherms, fluorescence microscopy, electron microscopy and X-ray diffraction show that LS adsorption is enhanced by this mechanism without substantially altering the structure or properties of the LS monolayer.     

Component-specific surface and physiological activity in bovine-derived lung surfactants

Composition, surface activity and effects on pressure-volume (P-V) mechanics are examined for lavaged calf lung surfactant (LS) and the clinical exogenous surfactants Infasurf and Survanta. Lavaged LS and Infasurf had closely-matching compositions of phospholipids and neutral lipids. Survanta had higher levels of free fatty acids and triglycerides consistent with its content of added synthetic palmitic acid and tripalmitin. Infasurf and Survanta both contained less total protein than LS because of extraction with hydrophobic solvents, but the total protein content relative to phospholipid in Survanta was about 45% lower than in Infasurf. This difference was primarily due to surfactant protein (SP)-B, which was present by ELISA at a mean weight percent relative to phospholipid of 1.04% in LS, 0.90% in Infasurf, and 0.044% in Survanta. Studies on component fractions separated by gel permeation chromatography showed that SP-B was a major contributor to the adsorption, dynamic surface activity, and P-V mechanical effects of Infasurf, which approached whole LS in magnitude. Survanta had lower adsorption, higher minimum surface tension, and a smaller effect on surfactant-deficient P-V mechanics consistent with minimal contributions from SP-B. Addition of 0.05% by weight of purified bovine SP-B to Survanta did not improve surface or physiological activity, but added 0.7% SP-B improved adsorption, dynamic surface tension lowering, and P-V activity to levels similar to Infasurf. The SP-B content of lung surfactants appears to be a crucial factor in their surface activity and efficacy in improving surfactant-deficient pulmonary P-V mechanics.     

The role of palmitic acid in pulmonary surfactant: enhancement of surface activity and prevention of inhibition by blood proteins

The surface activity of two surfactant preparations, Lipid Extract Surfactant (LES) and Survanta, was examined during adsorption and dynamic compression using a pulsating bubble surfactometer. At low surfactant phospholipid concentrations (1-2.5 mg/ml), Survanta reduces surface tension at minimum bubble radius faster than LES: however, with continued pulsation LES obtains a lower surface tension. Addition of surfactant-associated protein A (SP-A) to LES significantly reduces the time required to reduce surface tension. Survanta is completely unresponsive to the addition of SP-A in that no further reduction of surface tension is observed. Addition of various blood components has been previously shown to inactivate surfactants in vitro. Addition of fibrinogen to Survanta causes an increase in surface tension when measured in the absence of calcium. When assayed in the presence of calcium, inhibition by fibrinogen is not observed possibly due to aggregation of this protein. Albumin and alpha-globulin strongly inhibit Survanta at physiological serum concentrations both in the presence and absence of calcium. The surface activity of Survanta is also inhibited by lysophosphatidylcholine (lyso-PC). The role of palmitic acid in the surface activity of pulmonary surfactant was examined by adding palmitic acid to LES. At low phospholipid concentrations addition of palmitic acid (10% w/w of the surfactant phospholipid) greatly enhances the surface activity of LES. Maximal enhancement of surface activity and adsorption was observed at or above 7.5% added palmitic acid (w/w of surfactant lipid). LES supplemented with palmitic acid is more resistant to inhibition by fibrinogen, albumin, alpha-globulin and lyso-PC than LES alone, however, the counteraction of blood protein inhibition is not as pronounced as that observed with SP-A.     

A biophysical mechanism by which plasma proteins inhibit lung surfactant activity

These in vitro experiments study a potential mechanism by which plasma proteins, found in the alveoli during pulmonary edema and hemorrhage, may act to inhibit the surface activity of pulmonary surfactant. The results indicate that the inhibition of the adsorption facility and surface tension lowering ability of a calf lung surfactant extract (CLSE) by albumin, hemoglobin, or fibrinogen may be completely abolished by centrifugation of the protein-surfactant mixture at 12,500 x g. Furthermore, albumin, hemoglobin and fibrinogen (1.25 mg/ml) were shown to inhibit the adsorption of high concentrations of CLSE (0.32 mg/ml), normally unaffected by the addition of exogenous proteins, when the CLSE was injected into the subphase under a preformed protein surface film. Similarly, injection of large amounts of these proteins (2.5 mg/ml) into the subphase beneath a preformed CLSE surface film was without effect, even though the CLSE concentration was only 0.06 mg/ml, a surfactant concentration which is normally inhibited by even small amounts of exogenous protein. Taken together, the data suggest that some proteins may inhibit surfactant function by preventing the surfactant phospholipids from adsorbing to the air-liquid interface, possibly by a competition between the proteins and CLSE phospholipids for space at the air-liquid interface rather than direct molecular interactions between proteins and surfactant.     

A freeze-fracture transmission electron microscopy and small angle x-ray diffraction study of the effects of albumin, serum, and polymers on clinical lung surfactant microstructure

Freeze-fracture transmission electron microscopy shows significant differences in the bilayer organization and fraction of water within the bilayer aggregates of clinical lung surfactants, which increases from Survanta to Curosurf to Infasurf. Albumin and serum inactivate all three clinical surfactants in vitro; addition of the nonionic polymers polyethylene glycol, dextran, or hyaluronic acid also reduces inactivation in all three. Freeze-fracture transmission electron microscopy shows that polyethylene glycol, hyaluronic acid, and albumin do not adsorb to the surfactant aggregates, nor do these macromolecules penetrate the interior water compartments of the surfactant aggregates. This results in an osmotic pressure difference that dehydrates the bilayer aggregates, causing a decrease in the bilayer spacing as shown by small angle x-ray scattering and an increase in the ordering of the bilayers as shown by freeze-fracture electron microscopy. Small angle x-ray diffraction shows that the relationship between the bilayer spacing and the imposed osmotic pressure for Curosurf is a screened electrostatic interaction with a Debye length consistent with the ionic strength of the solution. The variation in surface tension due to surfactant adsorption measured by the pulsating bubble method shows that the extent of surfactant aggregate reorganization does not correlate with the maximum or minimum surface tension achieved with or without serum in the subphase. Albumin, polymers, and their mixtures alter the surfactant aggregate microstructure in the same manner; hence, neither inhibition reversal due to added polymer nor inactivation due to albumin is caused by alterations in surfactant microstructure.     

Surfactant protein B inhibits secretory phospholipase A2 hydrolysis of surfactant phospholipids

Hydrolysis of surfactant phospholipids (PL) by secretory phospholipases A(2) (sPLA(2)) contributes to surfactant damage in inflammatory airway diseases such as acute lung injury/acute respiratory distress syndrome. We and others have reported that each sPLA(2) exhibits specificity in hydrolyzing different PLs in pulmonary surfactant and that the presence of hydrophilic surfactant protein A (SP-A) alters sPLA(2)-mediated hydrolysis. This report tests the hypothesis that hydrophobic SP-B also inhibits sPLA(2)-mediated surfactant hydrolysis. Three surfactant preparations were used containing varied amounts of SP-B and radiolabeled tracers of phosphatidylcholine (PC) or phosphatidylglycerol (PG): 1) washed ovine surfactant (OS) (pre- and postorganic extraction) compared with Survanta (protein poor), 2) Survanta supplemented with purified bovine SP-B (1-5%, wt/wt), and 3) a mixture of dipalmitoylphosphatidylcholine (DPPC), 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC), and 1-palmitoyl-2-oleoyl-phosphatidylglycerol (POPG) (DPPC:POPC:POPG, 40:40:20) prepared as vesicles and monomolecular films in the presence or absence of SP-B. Hydrolysis of PG and PC by Group IB sPLA(2) (PLA2G1A) was significantly lower in the extracted OS, which contains SP-B, compared with Survanta (P = 0.005), which is SP-B poor. Hydrolysis of PG and PC in nonextracted OS, which contains all SPs, was lower than both Survanta and extracted OS. When Survanta was supplemented with 1% SP-B, PG and PC hydrolysis by PLA2G1B was significantly lower (P < 0.001) than in Survanta alone. When supplemented into pure lipid vesicles and monomolecular films composed of PG and PC mixtures, SP-B also inhibited hydrolysis by both PLA2G1B and Group IIA sPLA2 (PLA2G2A). In films, PLA2G1B hydrolyzed surfactant PL monolayers at surface pressures ≤30 mN/m (P < 0.01), and SP-B lowered the surface pressure range at which hydrolysis can occur. These results suggest the hydrophobic SP, SP-B, protects alveolar surfactant PL from hydrolysis mediated by multiple sPLA(2) in both vesicles (alveolar subphase) and monomolecular films (air-liquid interface).     

High-throughput evaluation of pulmonary surfactant adsorption and surface film formation

The assessment of new therapeutic strategies to cure surfactant-associated lung disorders would greatly benefit from assay systems allowing routine evaluations of surfactant functions. We present a method to measure surfactant adsorption kinetics into interfacial air-liquid interfaces based on fluorescence microplate readers. The principle of measurement is simple, robust, and reproducible: Wells of a microtiter plate contain an aqueous solution of a light-absorbing agent. Fluorescence is excited and collected from the top of the wells so that fluorescently labeled surfactant injected into the bulk can be detected only once adsorbed into the air-liquid interface. Mass transfer from the bulk to the interface is achieved by orbital shaking implemented in the plate reader instrument. The method has been tested and validated by using phospholipids or surfactants of different origins, by using albumin as surfactant inhibitor, and by comparison of results with Wilhelmy balance measurements. The method is suited for implementation in high-throughput screening routines for conditions affecting, or improving, surfactant film formation. In contrast to surface tension measurements, our method gives a direct readout of the amount of surfactant adsorbing into the interface, including the functionally important amount of material firmly associating with the interfacial film.     

Environmental tobacco smoke effects on lung surfactant film organization

Adsorption of the clinical lung surfactants (LS) Curosurf or Survanta from aqueous suspension to the air-water interface progresses from multi-bilayer aggregates through multilayer films to a coexistence between multilayer and monolayer domains. Exposure to environmental tobacco smoke (ETS) alters this progression as shown by Langmuir isotherms, fluorescence microscopy and atomic force microscopy (AFM). After 12 h of LS exposure to ETS, AFM images of Langmuir-Blodgett deposited films show that ETS reduces the amount of material near the interface and alters how surfactant is removed from the interface during compression. For Curosurf, ETS prevents refining of the film composition during cycling; this leads to higher minimum surface tensions. ETS also changes the morphology of the Curosurf film by reducing the size of condensed phase domains from 8-12 μm to ∼ 2 μm, suggesting a decrease in the line tension between the domains. The minimum surface tension and morphology of the Survanta film are less impacted by ETS exposure, although the amount of material associated with the film is reduced in a similar way to Curosurf. Fluorescence and mass spectra of Survanta dispersions containing native bovine SP-B treated with ETS indicate the oxidative degradation of protein aromatic amino acid residue side chains. Native bovine SP-C isolated from ETS exposed Survanta had changes in molecular mass consistent with deacylation of the lipoprotein. Fourier Transform Infrared Spectroscopy (FTIR) characterization of the hydrophobic proteins from ETS treated Survanta dispersions show significant changes in the conformation of SP-B and SP-C that correlate with the altered surface activity and morphology of the lipid-protein film.     

Micropuncture measurement of alveolar liquid pressure in excised dog lung lobes

We have investigated the mechanism of alveolar liquid filling in pulmonary edema. We excised, degassed, and intrabronchially filled 14 dog lung lobes from nine dogs with 75, 150, 225, or 350 ml of 5% albumin solution, and then air inflated the lobes to a constant airway pressure of 25 cmH2O. By use of micropipettes, we punctured subpleural alveoli to measure alveolar liquid pressure by the servo-null technique. Alveolar liquid pressure was constant in all lobes despite differences in lobe liquid volume and averaged 10.6 +/- 1.3 cmH2O. Thus, in all lobes a constant pressure drop of 14.4 cmH2O existed from airway to alveolar liquid across the air-liquid interface. We attribute this finding, on the basis of the Laplace equation, to an air-liquid interface of constant radius in all the lobes. In fact, we calculated from the Laplace equation an air-liquid interface radius which equalled morphological estimates of alveolar radius. We conclude that in the steady state, alveoli that contained liquid have a constant radius of curvature of the air-liquid interface possibly because they are always completely liquid filled.     

Measurements of interbilayer forces and protein adsorption on uncharged lipid bilayers displaying poly(ethylene glycol) chains

Poly(ethylene glycol) (PEG)-stabilized liposomes were recently shown to exhibit differences in cell uptake that were linked to the liposome charge. To determine the differences and similarities between charged and uncharged PEG-decorated liposomes, we directly measured the forces between two supported, neutral bilayers with terminally grafted PEG chains. The measurements were performed with the surface force apparatus. The force profiles were similar to those measured with negatively charged PEG conjugates of 1, 2-distearoyl-sn-glycero-3-phosphatidyl ethanolamine (DSPE), except that they lacked the longer ranged electrostatic repulsion observed with the charged compound. Theories for simple polymers describe the forces between end-grafted polymer chains on neutral bilayers. The force measurements were complemented by surface plasmon resonance studies of protein adsorption onto these layers. The lack of electrostatic forces reduced the adsorption of positively charged proteins and enhanced the adsorption of negatively charged ones. The absence of charge also allowed us to determine how membrane charge and the polymer grafting density independently affect protein adsorption on the coated membranes. Such studies suggest the physical basis of the different interactions of charged and uncharged liposomes with proteins and cells.     

Thermodynamic study of forces involved in bovine serum albumin and ovalbumin partitioning in aqueous two-phase systems

The partitioning of bovine serum albumin and ovalbumin in different two-phase aqueous polymer systems is investigated using a thermodynamic approach. Systems used were polyethylene glycols (PEGs) of molecular weights 1000 to 10,000 Da and Dextran T500 (500,000 Da). Ovalbumin transfer to the top phase is exothermic, which suggests an electrostatic interaction between the hydroxyl groups of PEG and the hydrophilic side chain of the protein, whereas the bovine serum albumin partition is an endothermic process that is entropically driven, which coincides with its high surface hydrophobicity. The effect of PEG molecular weight on enthalpy and heat capacity changes, associated with the partition of both proteins, is examined on the basis of a preferential interaction of low-molecular-weight PEG with the protein surface.     

Molecular dynamics study of small PNA molecules in lipid-water system

We present the results of molecular dynamics simulations of small peptide nucleic acid (PNA) molecules, synthetic analogs of DNA, at a lipid bilayer in water. At neutral pH, without any salt, and in the NP(n)gammaT ensemble, two similar PNA molecules (6-mers) with the same nucleic base sequence and different terminal groups are investigated at the interface between water and a 1-palmitoyl-2-oleoylphosphatidylcholine lipid bilayer. The results of our simulations suggest that at low ionic strength of the solution, both PNA molecules adsorb at the lipid-water interface. In the case where the PNA molecule has charged terminal groups, the main driving force of adsorption is the electrostatic attraction between the charged groups of PNA and the lipid heads. The main driving force of adsorption of the PNA molecule with neutral terminal groups is the hydrophobic interaction of the nonpolar groups. Our simulations suggest that the system free energy change associated with PNA adsorption at the lipid-water interface is on the order of several tens of kT per PNA molecule in both cases.     

Organotypic culture of human amnion cells in air-liquid interface as a potential substitute for skin regeneration

Background aimsThe aim of the present study was to evaluate the effects of air-liquid interface on the differentiation potential of human amnion epithelial cells (HAECs) to skin-like substitute in organotypic culture.MethodsHAECs at passage 1–2 were seeded onto a fibrin layer populated with human amnion mesenchymal cells to form the organotypic cultures. The organotypic HAECs were then cultured for 7, 14 and 21 d in two types of culture system: the submerged culture and the air-liquid interface culture. Cell morphogenesis was examined under the light and electron microscopes (transmission and scanning) and analyzed by immunohistochemistry.ResultsOrganotypic HAECs formed a single layer epithelium after 3 wk in submerged as well as air-liquid interface cultures. Ultrastructurally, desmosomes were observed in organotypic HAECs cultured in the air-liquid interface but not in the submerged culture. The presence of desmosomes marked the onset of early epidermal differentiation. Organotypic HAECs were positive against anti-CK18 and anti-CK14 in both the submerged and the air-liquid interface cultures. The co-expression of CK14 and CK18 suggested that differentiation of HAECs into skin may follow the process of embryonic skin development. However, weak expression of CK14 was observed after 2 and 3 wk of culture in air-liquid interface. CK10, involucrin, type IV collagen and laminin-5 expression was absent in organotypic HAECs. This observation reflects the initial process of embryonic epidermal differentiation and stratification.ConclusionsResults from the present study suggest that the air-liquid interface could stimulate early differentiation of organotypic HAECs to epidermal cells, with a potential use for skin regeneration.     

Enhanced surfactant adsorption via polymer depletion forces: a simple model for reversing surfactant inhibition in acute respiratory distress syndrome

Lung surfactant adsorption to an air-water interface is strongly inhibited by an energy barrier imposed by the competitive adsorption of albumin and other surface-active serum proteins that are present in the lung during acute respiratory distress syndrome. This reduction in surfactant adsorption results in an increased surface tension in the lung and an increase in the work of breathing. The reduction in surfactant adsorption is quantitatively described using a variation of the classical Smolukowski analysis of colloid stability. Albumin adsorbed to the interface induces an energy barrier to surfactant diffusion of order 5 k(B)T, leading to a reduction in adsorption equivalent to reducing the surfactant concentration by a factor of 100. Adding hydrophilic, nonadsorbing polymers such as polyethylene glycol to the subphase provides a depletion attraction between the surfactant aggregates and the interface that eliminates the energy barrier. Surfactant adsorption increases exponentially with polymer concentration as predicted by the simple Asakura and Oosawa model of depletion attraction. Depletion forces can likely be used to overcome barriers to adsorption at a variety of liquid-vapor and solid-liquid interfaces.     

Comparison of simultaneous wet milling and enzymatic hydrolysis of cellulose in ball mill and attrition mill reactors

Simultaneous wet milling and enzymatic hydrolysis of newsprint in a ball mill reactor (BMR) and in an attrition mill reactor (AMR) were studied. The effect of milling on the enzyme deactivation was also investigated. Variables studied included milling media size, material, and the presence or absence of an air-liquid interface in the reactor. At a reaction temperature of 45 degrees C and a pH of 4.5 and in the presence of an air-liquid interface, the amount of reducing sugars produced by hydrolysis using a BMR was typically 5 to 15%less than the amount produced using an AMR. Without an air-liquid interface there was no significant difference. The effect of an air-;liquid interface on enzyme deactivation without any substrate was also studied. Enzyme activity after six hours of milling ranged from 1 to 85% ofthe starting activity. In both the AMR and the BMR, the extent of enzyme deactivation was 20 to 50% greater with an air-liquid interface present than with the air-liquid interface absent.     

Biological membrane modeling with a liquid/liquid interface. Probing mobility and environment with total internal reflection excited fluorescence.

Total internal reflection of exciting light, in combination with fluorescence intensity and polarization measurements, was used to selectively study fluorescent compounds adsorbed to the interface region between two immiscible liquids. A fluorometer was constructed which provided excitation at variable angles of incidence and allowed sensitive detection of polarized fluorescence emitted from the interface. The compound 4,4'-bis-1-phenylamino-8-naphthalenesulfonate (bis-ANS) was examined at a decalin/water interface and was found to possess remarkable affinity for the interface region with the bulk of the adsorbed molecule residing in the decalin phase. The adsorbed fluorophore displayed an apparent hindered rotation in the plane of the interface with a rotational diffusion coefficient 3- to 12-fold lower than that expected for bis-ANS in solution. While other dyes examined were not found to be significantly surface active, the addition of cationic surfactant sufficed to induce adsorption of the anionic fluorophore 1-aminonaphthalene-3,6,8-trisulfonic acid. This fluoropore was found to reside in an aqueous environment when bound to the interface, and it also exhibited hindered rotation in the plane of the interface. As the concentrations of the dyes were increased, both adsorbed dyes exhibited polarization reductions consistent with excitation energy transfer. Adsorption of bis-ANS was reversed by addition of bovine serum albumin. The membrane protein cytochrome b5 was found not to bind at the decalin/water interface, indicating that interaction with lipid is required for its adherence to biological membranes.