Coupling of a DNA piezoelectric biosensor and polymerase chain reaction to detect apolipoprotein E polymorphisms

In this paper we report the coupling of the Polymerase Chain Reaction (PCR) with a piezoelectric biosensor to detect a point mutation in a human gene. Biotinylated 23-mer probes were immobilised on the streptavidin coated gold surface of a quartz crystal; streptavidin was covalently bound to the thiol/dextran modified gold surface. The hybridisation of the immobilised probes with a short sequence (23 mer) complementary, non-complementary and mismatched DNA was investigated: the device was able to distinguish the different synthetic oligonucleotides. Many cycles of measurements can be performed on the same crystal surface regenerating the single strand of DNA with 1 mM of HCl. The same hybridisation reaction was then performed using real samples of human DNA extracted from blood and amplified by PCR, following a standard procedure for genetic detection of the polymorphism of the apolipoprotein E (apoE) gene. The procedure was able to distinguish the sequences present in the different samples, which differ only in one base: in this way it was possible distinguish between different groups of genotypes with apoE typing. Experiments with 'blank' samples confirmed the absence of adsorption or non-specific effects on the quartz crystal treated with the reported procedure.     

Comparison of different protein immobilization methods on quartz crystal microbalance surface in flow injection immunoassay.

In this study, a quartz crystal microbalance (QCM) system operated repetitively in flow injection analysis (FIA) mode, is reported. Four immobilization approaches of seven different methods include: (i) physical adsorption; (ii) two thioamine thiolation methods, using cysteamine and cystamine for gold chemisorption and further coupling; (iii) two oxidized dextran spacer methods, coupling of cysteamine and cystamine thiolated QCM surface with periodate-oxidized dextran for further Schiff acid-base reaction; and (iv) two thiol-gold chemisorption-based self-assembled monolayer (SAM), applying short-chain, C(3), and long-chain, C(11), mercapto fatty acids to insolubilize human serum albumin (HSA) on QCM surface. Effects of these protein immobilization methods on FIA immunoassay of anti-HSA were compared. At the 0.01 mg/ml anti-HSA level, the lowest analyte concentration tested, the SAM using 11-mercaptoundecanoic acid as QCM surface activating agent generated a larger frequency shift than the other immobilization methods. This implied that the use of thiolated long-chain fatty acid constructed as self-assembled monolayer may thereby potentially be a useful protein immobilization method in QCM-FIA application.     

Detection of TP53 mutation using a portable surface plasmon resonance DNA-based biosensor

A DNA-based surface plasmon resonance (SPR) biosensor has been developed for the detection of TP53 mutation using the inexpensive and commercially available instrument, SPREETA SPR-EVM-BT, from Texas Instruments. A direct immobilisation procedure, based on the coupling of thiol-derivatised oligonucleotide probes (Probe-C6-SH) to bare gold sensor surfaces, was optimized using synthetic oligonucleotides. Hybridisation reactions between the immobilised probe and a short sequence (26 mer) complementary, non-complementary and one-point mutation DNA were then investigated. The main analytical parameters of the sensor system were studied in detail including selectivity, sensitivity, reproducibility and analysis time. Finally, the sensor system was successfully applied to polymerase chain reaction (PCR)-amplified real samples, DNA extracted from both normal, wild-type, (Jurkat) and mutated (Molt 4), carrying the mutation at codon 248 of the TP53 cell lines. The results obtained demonstrate that the DNA-based SPR biosensor was able to distinguish sequences present in the various samples that differ only by one base; and hence, it appears to be a strong candidate technique for the detection of gene mutation.     

Immobilisation of DNA probes for the development of SPR-based sensing

An immobilisation procedure based on the direct coupling of thiol-derivatised oligonucleotide probes to bare gold sensor surfaces has been used for DNA sensing applications. The instrumentation used relies on surface plasmon resonance (SPR) transduction; in particular the commercially available instruments BIACORE X and SPREETA, have been employed in this study. The performances of the SPR-based DNA sensors resulting from direct coupling of thiol-derivatised DNA probes onto gold chips, have been studied in terms of the main analytical parameters, i.e. selectivity, sensitivity, reproducibility, analysis time, etc. A comparison between the thiol-derivatised immobilisation approach and a reference immobilisation method, based on the coupling of biotinylated oligonucleotide probes onto a streptavidin coated dextran sensor surface, using synthetic complementary oligonucleotides has been discussed. Finally, a denaturation method to obtain ssDNA ready for hybridisation analysis has been applied to polymerase chain reaction (PCR) amplified samples, for the detection of genetically modified organisms (GMOs).     

Detection of CFTR mutations using ARMS and low-density microarrays

The amplification refractory mutation system (ARMS) is routinely used for the identification of specific mutations within genomes. This PCR-based assay, although simple, is performed at a low-throughput scale, usually requiring gel-electrophoresis for the identification of specific mutations. We have applied the ARMS technology to a low-density microarray system to facilitate the needs of the medical clinic; high-throughput capabilities and ease-of-use. Mutations within the cystic fibrosis transmembrane regulator (CFTR) gene (DeltaF508, 1717-1G>A, G542X, 621+1G>T, and N1303K) were detected by multiplex-ARMS-PCR, and fragments were post-PCR labeled with Cy5. Amine-modified probes specific for both the wild-type and mutant forms of each mutation site were attached to glass substrates. Following hybridization of the PCR fragments to the attached probes (in a low-density microarray format), confirmation of the presence of specific sequences was achieved using a commercial scanner, as well as a fabricated low-cost fluorescent detector and applicable software. The novel combination of the ARMS and low-density microarray technologies allows for a high-throughput, simple means to rapidly identify multiple known mutations for many genetic diseases including cystic fibrosis.     

Optimisation of glass surfaces for optical immunosensors

The surfaces of glass sensor chips were modified with dextran to generate a layer protecting the sensor surface from unspecific protein binding and also serving as a matrix for covalent protein immobilisation. Dextran was coupled to the glass surface in different concentrations either covalently on amino-functionalised glass chips or via biotin-avidin binding. Unspecific binding of BSA was monitored with the grating coupler system, and was increasingly suppressed with increasing dextran concentrations. Using a solution with 100 mg/ml carboxymethylated dextran decreased the signals to approximately 2% of those obtained at an untreated glass chip. Antibodies were successfully immobilised in the dextran and binding to the corresponding Cy5-labelled antigen was repeatedly monitored using a fluorescence sensor system (total internal reflection fluorescence (TIRF)).     

Cloning of eukaryotic genes in single-strand phage vectors: the human interferon genes

Using oligonucleotide probes with defined sequences, we have selected clones from a human lymphocyte cDNA library which represent human leukocyte (HuIFN-α) and fibroblast (HuIFN-β) interferon gene sequences. Double-stranded f1 phage DNA was used as the vector for initial cloning of cDNA. Clones carrying interferon gene sequences were identified by hybridization with the oligonucleotide probes. The same oligonucleotide probes were used as primers for dideoxy chain termination sequencing of the clones. One HuIFN-α clone, 201, has a nucleotide sequence different from published HuIFN-α sequences. Under control of the lacUV5 promoter, the 201 gene has been used to express biologically active HuIFN-α in Escherichia coli.     

Imaging immobilised ssDNA and detecting DNA hybridisation by means of the repelling mode of scanning electrochemical microscopy (SECM)

The supposed repelling mode of scanning electrochemical microscopy (SECM) allows truly label-free electrochemical recognition of the presence and hybridisation of nucleic acids that are immobilised on conducting DNA chips. Basically, the SECM-based detection of single- and double-stranded DNA profits from the electrostatic repulsion between deprotonated phosphate groups at the backbone of the oligonucleotides and a free-diffusing negatively charged redox mediator (e.g. [Fe(CN)(6)](3-/4-)). In electrolytes of proper pH and ionic strength, this coulomb interaction is heavily influencing the diffusion properties of the mediator in the vicinity of the surface-anchored DNA strands. This charge interaction modulates the diffusional mass transport for the charged redox species in the DNA modified regions, and thus locally decreases the positive feedback currents measured with a SECM tip placed within the electrochemical nearfield of the chip surface. This approach was used to study arrays of synthetic 20-base oligonucleotide probes that were immobilised on monolayer-modified gold surfaces. Evidence is provided that the density of probes, the ionic strength of solution and the tip-to-sample distance have a strong impact on the capability of the repelling mode of SECM to visualise probe spots and hybridisation while the concentration of the chosen mediator did not significantly affect detection.     

Strategies for optimizing DNA hybridization on surfaces

Specific and predictable hybridization of the polynucleotide sequences to their complementary counterparts plays a fundamental role in the rational design of new nucleic acid nanodevices. Generally, nucleic acid hybridization can be performed using two major strategies, namely hybridization of DNA or RNA targets to surface-tethered oligonucleotide probes (solid-phase hybridization) and hybridization of the target nucleic acids to randomly distributed probes in solution (solution-phase hybridization). Investigations into thermodynamic and kinetic parameters of these two strategies showed that hybridization on surfaces is less favorable than that of the same sequence in solution. Indeed, the efficiency of DNA hybridization on surfaces suffers from three constraints: (1) electrostatic repulsion between DNA strands on the surface, (2) steric hindrance between tethered DNA probes, and (3) nonspecific adsorption of the attached oligonucleotides to the solid surface. During recent years, several strategies have been developed to overcome the problems associated with DNA hybridization on surfaces. Optimizing the probe surface density, application of a linker between the solid surface and the DNA-recognizing sequence, optimizing the pH of DNA hybridization solutions, application of thiol reagents, and incorporation of a polyadenine block into the terminal end of the recognizing sequence are among the most important strategies for enhancing DNA hybridization on surfaces.     

Oligonucleotide Microarray with RD-PCR Labeling Technique for Detection and Typing of Human Papillomavirus

Currently, screening for high-risk human papillomavirus (HPV) infection remains an important health concern throughout the world, because of the close association between certain types of HPV and cervical cancer. In this study, we explore the possibility of using ∼70mer oligonucleotide microarray for detection and genotyping of HPV. The ∼70mer type-specific oligonucleotide probes of four different types HPV were designed by using biological software Arraydesigner 2.0, which analyzed the whole genome sequences of HPV and selected optimal probes. These probes were synthesized and printed onto the surface of glass slides in order to prepare a low-density microarray. HPV samples were labeled with fluorescence dyes Cy3 using a method of restriction display polymerase chain reaction (RD-PCR). HPV plasmid DNA was restricted with Sau3A I to produce multiple fragments that were ligated to adaptors subsequently and used as PCR template. PCR labeling was performed with the fluorescently labeled universal primer (Cy3-UP) whose sequence is designed according to the adaptor of the RD-PCR approaches. The labeled samples were hybridized with the oligonucleotide microarray. The scanning results showed that HPV DNA hybridized specifically with multiple spots correspondingly to show positive signals, whereas no signals were detected of all the negative and blank controls. These results demonstrated that ∼70mer oligonucleotide microarray can be applied to HPV detection and genotyping. The application of RD-PCR in the sample labeling can increase significantly the sensitivity of the assay and will be especially useful for the discriminate diagnosis of multiple pathogens.     

Hydrogen bonding versus ion pairing in polyelectrolyte multilayers with homopolynucleotides

Homopolynucleotides--poly(adenylic acid), poly(A), and poly(uridylic acid), poly(U)--were assembled, layer-by-layer, into thin films with poly(ethylenimine), PEI. Various combinations and sequences of polynucleotide and PEI were used to highlight contributions of electrostatic versus hydrogen bonding as driving forces for multilayer build-up. Assembly of alternating poly(A) and poly(U) failed to yield growing films, due to excessively strong interactions between these complimentary strands. The surface morphology of multilayers depended on the deposition order and whether films had been annealed by salt. Films assembled from preformed A/U duplexes (having high persistence lengths) were very smooth. Individual adsorption steps, followed by optical waveguide light-mode spectroscopy, showed that only complementary polynucleotides adsorb by H-bonding to the surface of a growing multilayer. In contrast to behavior usually observed for polyelectrolyte multilayer build-up, the films decreased in thickness with increasing salt concentration.     

Development of an oligonucleotide probe for Aureobasidium pullulans based on the small-subunit rRNA gene.

Aureobasidium pullulans, a cosmopolitan yeast-like fungus, colonizes leaf surfaces and has potential as a biocontrol agent of pathogens. To assess the feasibility of rRNA as a target for A. pullulans-specific oligonucleotide probes, we compared the nucleotide sequences of the small-subunit rRNA (18S) genes of 12 geographically diverse A. pullulans strains. Extreme sequence conservation was observed. The consensus A. pullulans sequence was compared with other fungal sequences to identify potential probes. A 21-mer probe which hybridized to the 12 A. pullulans strains but not to 98 other fungi, including 82 isolates from the phylloplane, was identified. A 17-mer highly specific for Cladosporium herbarum was also identified. These probes have potential in monitoring and quantifying fungi in leaf surface and other microbial communities.     

Endocytic trafficking routes of wild type and DeltaF508 cystic fibrosis transmembrane conductance regulator

Intracellular trafficking of cystic fibrosis transmembrane conductance regulator (CFTR) is a focus of attention because it is defective in most patients with cystic fibrosis. DeltaF508 CFTR, which does not mature conformationally, normally does not exit the endoplasmic reticulum, but if induced to do so at reduced temperature is short-lived at the surface. We used external epitope-tagged constructs to elucidate the itinerary and kinetics of wild type and DeltaF508 CFTR in the endocytic pathway and visualized movement of CFTR from the surface to intracellular compartments. Modulation of different endocytic steps with low temperature (16 degrees C) block, protease inhibitors, and overexpression of wild type and mutant Rab GTPases revealed that surface CFTR enters several different routes, including a Rab5-dependent initial step to early endosomes, then either Rab11-dependent recycling back to the surface or Rab7-regulated movement to late endosomes or alternatively Rab9-mediated transit to the trans-Golgi network. Without any of these modulations DeltaF508 CFTR rapidly disappears from and does not return to the cell surface, confirming that its altered structure is detected in the distal as well as proximal secretory pathway. Importantly, however, the mutant protein can be rescued at the plasma membrane by Rab11 overexpression, proteasome inhibitors, or inhibition of Rab5-dependent endocytosis.     

High-density multiplex detection of nucleic acid sequences: oligonucleotide ligation assay and sequence-coded separation.

We describe a non-isotopic, semi-automated method for large-scale multiplex analysis of nucleic acid sequences, using the cystic fibrosis transmembrane regulator (CFTR) gene as an example. Products of a multiplex oligonucleotide ligation assay (OLA) are resolved electrophoretically from one another and from unligated probes under denaturing conditions with fluorescence detection. One ligation probe for each OLA target carries a fluorescent tag, while the other probe carries an oligomeric non-nucleotide mobility modifier. Each OLA product has a unique electrophoretic mobility determined by the ligated oligonucleotides and the mobility-modifier oligomer arbitrarily assigned (coded) to its target. The mobility range for practical mobility modifiers is much wider than the accessible range from unmodified ligated oligonucleotides of practical length. Each mobility modifier is built from phosphoramidite monomers in a stepwise manner on its associated oligonucleotide using an automated synthesizer. The resulting mobility modifiers lower the probe-target duplex Tm by less than 3 degrees C and retard probe-target annealing by less than 50%, with negligible effect on OLA yield and specificity. This method is especially useful for allelic discrimination in highly polymorphic genes such as CFTR.     

Cystic fibrosis mice carrying the missense mutation G551D replicate human genotype-phenotype correlations.

We have generated a mouse carrying the human G551D mutation in the cystic fibrosis transmembrane conductance regulator gene (CFTR) by a one-step gene targeting procedure. These mutant mice show cystic fibrosis pathology but have a reduced risk of fatal intestinal blockage compared with 'null' mutants, in keeping with the reduced incidence of meconium ileus in G551D patients. The G551D mutant mice show greatly reduced CFTR-related chloride transport, displaying activity intermediate between that of cftr(mlUNC) replacement ('null') and cftr(mlHGU) insertional (residual activity) mutants and equivalent to approximately 4% of wild-type CFTR activity. The long-term survival of these animals should provide an excellent model with which to study cystic fibrosis, and they illustrate the value of mouse models carrying relevant mutations for examining genotype-phenotype correlations.     

Detection and kinetic studies of triplex formation by oligodeoxynucleotides using real-time biomolecular interaction analysis (BIA).

Real-time biomolecular interaction analysis (BIA) has been applied to triplex formation between oligodeoxynucleotides. 5'-Biotinylated oligonucleotides were immobilised on the streptavidin-coated surface of a biosensor chip and subsequently hybridised to their complementary strand. Sequence-specific triplex formation was observed when a suitable third-strand oligopyrimidine was injected over the surface-bound duplex. In addition, a single-stranded oligonucleotide immobilised on the chip surface was able to capture a DNA duplex by triplex recognition. The presence of spermine increases the rate of association between the third strand and immobilised duplex, but at elevated spermine concentrations non-specific association is observed. A preliminary kinetic analysis of triplex formation at pH 5.2 by an 11mer third strand containing thymine, cytosine and uracil is reported. Values for the association and dissociation rate constants were determined to be (1.9 +/- 0.2) x 10(3) M-1 s-1 and (8.1 +/- 1.9) x 10(-5) s-1, respectively.     

Cloning the mouse homolog of the human cystic fibrosis transmembrane conductance regulator gene.

The cystic fibrosis transmembrane conductance regulator is encoded by the gene known to be mutated in patients with cystic fibrosis. This paper reports the cloning and sequencing of cDNAs for the murine homolog of the human cystic fibrosis transmembrane conductance regulator gene. A clone that, by analogy to the human sequence, extends 3' from exon 9 to the poly(A) tail was isolated from a mouse lung cDNA library. cDNA clones containing exons 4 and 6b were also isolated and sequenced, but the remainder of the mRNA proved difficult to obtain by conventional cDNA library screening. Sequences spanning exons 1-9 were cloned by PCR from mouse RNA. The deduced mouse protein sequence is 78% identical to the human cystic fibrosis transmembrane regulator, with higher conservation in the transmembrane and nucleotide-binding domains. Amino acid sequences in which known cystic fibrosis missense mutations occur are conserved between man and mouse; in particular, the predicted mouse protein has a phenylalanine residue corresponding to that deleted in the most common human cystic fibrosis mutation (delta F508), which should allow the use of transgenic strategies to introduce this mutation in attempts to create a "cystic fibrosis mouse".     

One multiplex control for 29 cystic fibrosis mutations

A simple approach is described to synthesize and clone an inexhaustible supply of any homozygous and/or heterozygous controls diluted with yeast genomic DNA to mimic human genome equivalents for use throughout the entire multiplex mutation assay. As a proof of principle, the 25 cystic fibrosis mutation panel selected by the American College of Medical Genetics and four additional mutant sequences were prepared as a single control mixture. The 29 CFTR mutations were incorporated into 17 gene fragments by PCR amplification of targeted sequences using mutagenic primers on normal human genomic DNA template. Flanking primers selected to bind beyond all published PCR primer sites amplified controls for most assay platforms. The 17 synthesized 433-933-bp CFTR fragments each with one to four homozygous mutant sequences were cloned into nine plasmid vectors at the multiple cloning site and bidirectionally sequenced. Miniplasmid preps from these nine clones were mixed and diluted with genomic yeast DNA to mimic the final nucleotide molar ratio of two CFTR genes in 6 x 10(9) bp total human genomic DNA. This mixture was added to control PCR reactions prior to amplification as the only positive control sample. In this fashion >200 multiplex clinical PCR analyses of >4,000 clinical patient samples have been controlled simultaneously for PCR amplification and substrate specificity for 29 tested mutations without cross contamination. This clinically validated multiplex cystic fibrosis control can be modified readily for different test formats and provides a robust means to control for all mutations instead of rotating human genomic controls each with a fraction of the mutations. This approach allows scores of additional mutation controls from any gene loci to be added to the same mixture annually.     

Chitosan scaffolds for biomolecular assembly: coupling nucleic acid probes for detecting hybridization

Chitosan, a naturally occurring biopolymer, was used as a scaffold for the covalent binding of single-stranded DNA oligonucleotide probes in a fluorescence-based nucleic acid hybridization assay. Chitosan's pH dependent chemical and electrostatic properties enable its deposition on electrodes and metal surfaces, as well as on the bottom of microtiter plates. A combinatorial 96-well microtiter plate format was used to optimize chemistries and reaction conditions leading to hybridization experiments. We found the coupling of oligonucleotides using relatively common glutaraldehyde chemistry was quite robust. Our hybridization results for complementary ssDNA oligonucleotides (E. coli dnaK sequences) demonstrated linear fluorescence intensity with concentration of E. coli dnaK-specific oligonucleotide from 0.73 microM to 6.6 microM. Moreover, hybridization assays were specific as there was minimal fluorescence associated with noncomplementary groEL oligonucleotide. Finally, these results demonstrate the portability of a DNA hybridization assay based on covalent coupling to chitosan, which, in turn, can be deposited onto various surfaces. More arduous surface preparation techniques involving silanizing agents and hazardous washing reagents are eliminated using this technique.     

Fabrication of DNA microarrays onto poly(methyl methacrylate) with ultraviolet patterning and microfluidics for the detection of low-abundant point mutations

We have developed a simple ultraviolet (UV)-photomodification protocol using poly(methyl methacrylate) and polycarbonate to produce functional scaffolds consisting of carboxylic groups that allow covalent attachment of amine-terminated oligonucleotide probes to these surface groups through carbodiimide coupling. Use of the photomodification procedure coupled to microfluidics allowed for the rapid generation of medium-density DNA microarrays. The method reported herein involves the use of poly(dimethylsiloxane) microchannels reversibly sealed to photomodified poly(methyl methacrylate) surfaces to serve as stencils for patterning the oligonucleotide probes. After array construction, the poly(dimethylsiloxane) stencil is rotated 90 degrees to allow interrogation of the array using microfluidics. The photomodification process for array fabrication involves only three steps: (1) broadband UV exposure of the polymer surface, (2) carbodiimide coupling of amine-terminated oligonucleotide probes to the surface (via an amide bond), and (3) washing of the surface. The density of probes attached to this activated surface was found to be approximately 41pmolcm(-2), near the steric-saturation limit for short oligonucleotide probes. We demonstrate the use of this procedure for screening multiple KRAS2 mutations possessing high diagnostic value for colorectal cancers. A ligase detection reaction/universal array assay was carried out using parallel detection of two different low-abundant DNA point mutations in KRAS2 oncogenes with the allelic composition evaluated at one locus. Four zip code probes immobilized onto the poly(methyl methacrylate) surface directed allele-specific ligation products containing mutations in the KRAS2 gene (12.2D, 12.2A, 12.2V, and 13.4D) to the appropriate address of a universal array with minimal amounts of cross-hybridization or misligation.