Citrinin detection by intensified fluorescence signal of a FRET-based immunosensor using magnetic/silica core–shell

The specific immune-reaction between the anti-citrinin antibody immobilized on the surface of magnetic/silica core–shell (MSCS) and the citrinin–Rho123–BSA conjugate brings the Rho123 fluorophore as an acceptor and the QDs as a donor in close spatial proximity and causes FRET for occurring upon photo-excitation of the QDs. The novelties of this study include: (1) immobilization of the MSCS; (2) large amount of the immobilized QDs, and (3) immobilization of a large amount of Rho123 on the BSA macromolecule. Cd/Te QDs were synthesized by the simultaneous reduction of cadmium chloride and tellurium in the presence of sodium borohydride. Magnetic nanoparticles were synthesized using FeSO₄ and FeCl₃. The prepared magnetic nanoparticles shelled by silica using tetraethoxysilane in the presence of ammonia. Transmission electron microscopy (TEM) analysis was used for investigating shape and monodispersity of the nanoparticles. EDC/NHS was used as a cross linking agent for immobilization of the QDs, conjugation of citrinin to amino groups of BSA, labeling of BSA with Rho123 and also for immobilization of the amino-functionalized MSCS on the immobilized QDs. Immobilization of the anti-citrinin antibody on the surface of the amino-functionalized MSCS was performed by Schiff-base mechanism. By using these three effective strategies, sensitivity of the designed nanobiosensor was incredibly enhanced as a very low limit of detection (up to 0.1 pM). The feasibility of this technique was tested by the detection of citrinin in the spiked human serum. Results showed that there was a linear correlation between the decreased fluorescence intensity of the Rho123 and increased fluorescence intensity of the QDs with increasing concentration of citrinin in the spiked samples in the range of 1–6 pM. According to obtained results, we conclude that this highly sensitive detection scheme is a easy, quick and impressive method that can be used in optical-based nanosensors.     

Sensitive electrochemical immunosensor for α-synuclein based on dual signal amplification using PAMAM dendrimer-encapsulated Au and enhanced gold nanoparticle labels

A novel electrochemical immunosensor for sensitive detection of α-synuclein (α-SYN), a very important neuronal protein, has been developed based on dual signal amplification strategy. Herein, G4-polyamidoamine dendrimer-encapsulated Au nanoparticles (PAMAM-Au nanocomposites) were covalently bound on the poly-o-aminobenzoic acid (poly-o-ABA), which was initially electropolymerized on the electrode surface to perform abundant carboxyl groups. The formed immunosensor platform, PAMAM-Au, was proved to provide numerous amino groups to allow highly dense immobilization of antigen, and facilitate the improvement of electrochemical responses as well. Subsequently, the enhanced gold nanoparticle labels ({HRP-Ab(2)-GNPs}) were fabricated by immobilizing horseradish peroxidase-secondary antibody (HRP-Ab(2)) on the surface of gold nanoparticles (GNPs). After an immunoassay process, the {HRP-Ab(2)-GNPs} labels were introduced onto the electrode surface, and produced an electrocatalytic response by reduction of hydrogen peroxide (H(2)O(2)) in the presence of enzymatically oxidized thionine. On the basis of the dual signal amplification of PAMAM-Au and {HRP-Ab(2)-GNPs} labels, the designed immunosensor displayed an excellent analytical performance with high sensitivity and stability. This developed strategy was successfully proved as a simple, cost-effective method, and could be easily extended to other protein analysis schemes.     

Electrochemical immunosensor for α-fetoprotein detection using ferroferric oxide and horseradish peroxidase as signal amplification labels

An electrochemical immunosensor for quantitative detection of α-fetoprotein (AFP) in human serum was developed using graphene sheets (GS) and thionine (TH) as electrode materials and mesoporous silica nanoparticles (MSNs) loaded with ferroferric oxide (Fe₃O₄) nanoparticles and horseradish peroxidase (HRP) as labels for signal amplification. In this study, the compound of GS and TH (GS–TH) was used as a substrate for promoting electron transfer and immobilization of primary antibody of AFP (Ab₁). MSNs were used as a carrier for immobilization of secondary antibody of AFP (Ab₂), Fe₃O₄, and HRP. The synergistic effect occurred between Fe₃O₄ and HRP and greatly improved the sensitivity of the immunosensor. This method could detect AFP over a wide concentration range from 0.01 to 25 ng ml⁻¹ with a detection limit of 4 pg ml⁻¹. This strategy may find wide potential application in clinical analysis or detection of other tumor markers.     

Carboxymethyl chitosan-poly(amidoamine) dendrimer core–shell nanoparticles for intracellular lysozyme delivery

Intracellular delivery of native, active proteins is challenging due to the fragility of most proteins. Herein, a novel polymer/protein polyion complex (PIC) nanoparticle with core–shell structure was prepared. Carboxymethyl chitosan-grafted-terminal carboxyl group-poly(amidoamine) (CM-chitosan-PAMAM) dendrimers were synthesized by amidation and saponification reactions. ¹H NMR was used to characterize CM-chitosan-PAMAM dendrimers. The TEM images and results of lysozyme loading efficiency indicated that CM-chitosan-PAMAM dendrimers could self-assemble into core–shell nanoparticles, and lysozyme was efficiently encapsulated inside the core of CM-chitosan-PAMAM dendrimer nanoparticles. Activity of lysozyme was completely inhibited by CM-chitosan-PAMAM Dendrimers at physiological pH, whereas it was released into the medium and exhibited a significant enzymatic activity in an acidic intracellular environment. Moreover, the CM-chitosan-PAMAM dendrimer nanoparticles did not exhibit significant cytotoxicity in the range of concentrations below 3.16 mg/ml. The results indicated that these CM-chitosan-PAMAM dendrimers have excellent properties as highly potent and non-toxic intracellular protein carriers, which would create opportunities for novel applications in protein delivery.     

Highly sensitive electrochemiluminescence biosensors for cholesterol detection based on mesoporous magnetic core–shell microspheres

A sensitive electrochemiluminescence (ECL) biosensor for cholesterol detection based on multifunctional core–shell structured microspheres (Fe₃O₄@SiO₂–Au@mpSiO₂) is reported. This microsphere consisted of a core of silica-coated magnetite nanoparticle, an active transition layer of gold nanoparticles and a mesoporous silica shell. Scanning electron microscopy was employed to observe the morphology of the nanomaterials and transmission electron microscopy was used to further confirm the subtle structure of Fe₃O₄@SiO₂–Au@mpSiO₂. The microspheres possessed a large surface area that increased enzyme loading, and an active transition layer gold nanoparticles enhanced the ECL signal. They were used to immobilize cholesterol oxidase for cholesterol detection with a high sensitivity, low detection limit and wide linear range. The linear range was from 0.83 to 2.62 mM with a detection limit of 0.28 µM (S/N = 3). Moreover, the reproducibility, stability and selectivity of the biosensor were established.     

Multifunctional Fe₃O₄ core/Ni-Al layered double hydroxides shell nanospheres as labels for ultrasensitive electrochemical immunoassay of subgroup J of avian leukosis virus

A novel electrochemical immunosensor for ultrasensitive detection of subgroup J of avian leukosis virus (ALVs-J) was designed by using graphene sheets (GS)-layered double hydroxides (LDHs) composites modified electrode with multifunctional Fe(3)O(4) core/Ni-Al LDHs shell (LDHs@Fe(3)O(4)) nanospheres as labels. At first, the GS-LDHs were used for the immunosensor platform for improving the electronic transmission rate as well as increasing the surface area to capture a large amount of primary antibodies (Ab(1)). After that, ferrocene (Fc), secondary antibodies (Ab(2)) and horseradish peroxidase (HRP) multifunctional LDHs@Fe(3)O(4) nanospheres were used as labels with high load amount and good biological activity. Subsequently, in presence of H(2)O(2), amplified signals were obtained by an electrochemical sandwich immunoassay protocol. To embody the signal amplification property of the protocol, the analytical properties of various immunosensor platform and labels were compared in detail. Under optimal conditions, the reduction peak currents of the electrochemical immunosensor were proportional to the ALVs-J concentration over the range from 10(2.32) to 10(5.50) TCID(50)/mL with a low detection limit (180 TCID(50)/mL, S/N=3). The resulting immunosensor also displayed a good selectivity, reproducibility and stability.     

Label-free electrochemical detection of human α-thrombin in blood serum using ferrocene-coated gold nanoparticles

This paper describes a novel approach to label-free electrochemical detection of human α-thrombin in human blood serum that utilizes ferrocene-coated gold nanoparticles (Fc-AuNPs). Human α-thrombin was specifically bound by the thiolated aptamers immobilized on the electrode. Positively charged Fc-AuNPs were electrostatically bound to the negatively charged aptamers. In principle, a high current peak should be observed in the absence of interactions between the aptamers and the human α-thrombin. This behavior indicates maximum adsorption of Fc-AuNPs by the negatively charged aptamers on the electrode surface. In contrast, when the thrombin-aptamer complex is formed, a low signal is expected because of the blocking capacities of the protein, which hinders the electrostatic binding of the Fc-AuNPs. The electrochemical signal, recorded by cyclic voltammetry and differential pulse voltammetry, indicates whether interactions between aptamers and proteins have occurred. There is a good correlation between the ferrocene oxidation peak intensity readings from our thrombin sensing system and the thrombin concentration, within the range of 1.2 μM-12 pM.     

Core–shell silver nanoparticles for optical labeling of cells

Silver nanoparticles have been modified with self-assembled monolayers of hydroxyl-terminated long chain thiols and encapsulated with a silica shell. The resulting core–shell nanoparticles were used as optical labels for cell analysis using flow cytometry and microscopy. The excitation of plasmon resonances in nanoparticles results in strong depolarized scattering of visible light, permitting detection at the single nanoparticle level. The nanoparticles were modified with neutravidin via epoxide–azide coupling chemistry, to which biotinylated antibodies targeting cell surface receptors were bound. The nanoparticle labels exhibited long-term stability in solutions with high salt concentrations without aggregation or silver etching. Labeled cells exhibited two orders of magnitude enhancement of the scattering intensity compared with unlabeled cells.     

Molecular dynamics simulation of the melting processes of core–shell and pure nanoparticles

Core–shell nanoparticles are nanosized particles that consist of a core and a shell, constructed from different metallic elements. Core–shell nanoparticles have received extensive attention, owing to their various potential applications such as paints, optical films and catalysts. Herein, we investigate the melting behaviours of different core–shell nanoparticles under continuous heating using molecular dynamics simulation. Different metallic elements were examined as core–shell and pure nanoparticles. Five different processes were observed during the melting of core–shell nanoparticles. In contrast, only one process was identified during the melting of pure nanoparticles. These processes were influenced by the nanoparticle size, shell thickness and differences between the lattice constants and melting point temperatures of the metallic elements. Our simulation provides microscopic insights into the melting behaviours of existing and proposed core–shell nanoparticles that would be highly beneficial towards the fabrication of materials with different chemical coatings.     

Separation of ursodeoxycholic acid from its isomeric mixture using core–shell molecular imprinting polymer

In order to separate ursodeoxycholic acid (UDCA) from its isomeric mixture, the molecular imprinting polymers (MIPs) were synthesized by using core–shell emulsion polymerization. In the porous imprinting polymer, ursodeoxycholic acid was used as imprinting molecule, acrylamide (AM) and α-methacrylic acid (MAA) were functional monomers, and CaCO₃ was used for the porogen in the polymerization to obtain large pore. Characterization of the MIP structure with IR spectra demonstrated the expected MIPs. Through adsorption and selectivity assays, AM as the functional monomer showed better separation efficiency than MAA, and nonspecific and specific adsorption capacities of MIP with AM were 43.52 and 13.93 mg/g, respectively. The separation factor of MIP with AM for UDCA was 2.20. Furthermore, MIP with AM could be applied to separate UDCA from the isomeric mixture by column chromatography successfully.     

Synthesis and characterization of magnetic β-cyclodextrin-chitosan nanoparticles as nano-adsorbents for removal of methyl blue

A novel nano-adsorbent, β-cyclodextrin-chitosan (CDC) modified Fe(3)O(4) nanoparticles (CDCM) is fabricated for removal of methyl blue (MB) from aqueous solution by grafting CDC onto the magnetite surface. The characteristics results of FTIR, SEM and XRD show that CDC is grafted onto Fe(3)O(4) nanoparticles. The grafted CDC on the Fe(3)O(4) nanoparticles contributes to an enhancement of the adsorption capacity because of the strong abilities of CDCM, which includes the multiple hydroxyl, carboxyl groups, amino groups and the formation of an inclusion complex due to the β-CD molecules through host-guest interactions, to adsorb MB. The adsorption of MB onto CDCM is found to be dependent on pH and temperature. Adsorption equilibrium is achieved in 50 min and the adsorption kinetics of MB is found to follow a pseudo-second-order kinetic model. Equilibrium data for MB adsorption are fitted well by Langmuir isotherm model. The maximum adsorption capacity for MB is estimated to be 2.78 g/g at 30°C. The CDCM was stable and easily recovered. Moreover the adsorption capacity was about 90% of the initial saturation adsorption capacity after being used four times.     

Electrochemical immunosensor based on Pd–Au nanoparticles supported on functionalized PDDA-MWCNT nanocomposites for aflatoxin B1 detection

This paper reports a label-free electrochemical immunosensor for the determination of aflatoxin B1 (AFB1), which is based on a gold electrode modified by a biocompatible film of carbon nanotubes/poly(diallyldimethylammoniumchloride)/Pd–Au nanoparticles (CNTs/PDDA/Pd–Au). The nanocomposite was characterized by transmission electron microscopy and the electrochemical behavior of modified electrodes was investigated by cyclic voltammetry. The CNTs/PDDA/Pd–Au nanocomposites film showed good electron transfer ability, which ensured high sensitivity to detect AFB1 in a range from 0.05 to 25 ng mL⁻¹ with a detection limit of 0.03 ng mL⁻¹ obtained at 3σ (where σ is the standard deviation of the blank solution, n = 10). The proposed immunosensor provides a simple tool for AFB1 detection. This strategy can be extended to any other antigen detection by using the corresponding antibodies.     

Helix-mediated protein–protein interactions as targets for intervention using foldamers

Protein–protein interactions (PPIs) play a central role in virtually all biological processes and have been the focus of intense investigation from structural molecular biology to cell biology for the majority of the last two decades and, more recently, are emerging as important targets for pharmaceutical intervention. A common motif found at the interface of PPIs is the α-helix, suggesting that, in the same way as the “lock and key” model has evolved for competitive inhibition of enzymes, it should be possible to elaborate “rule-based” approaches for inhibition of helix-mediated PPIs. This review will describe the biological function and structural features of a series of representative helix-mediated PPIs and discuss approaches that are being developed to target these interactions with small molecules that employ non-natural amino acids.     

Optimization of methazolamide-loaded solid lipid nanoparticles for ophthalmic delivery using Box–Behnken design

The purpose of the present study was to optimize methazolamide (MTZ)-loaded solid lipid nanoparticles (SLNs) which were used as topical eye drops by evaluating the relationship between design factors and experimental data. A three factor, three-level Box–Behnken design (BBD) was used for the optimization procedure, choosing the amount of GMS, the amount of phospholipid, the concentration of surfactant as the independent variables. The chosen dependent variables were entrapment efficiency, dosage loading, and particle size. The generated polynomial equations and response surface plots were used to relate the dependent and independent variables. The optimal nanoparticles were formulated with 100?mg GMS, 150?mg phospholipid, and 1% Tween80 and PEG 400 (1:1, w/v). A new formulation was prepared according to these levels. The observed responses were close to the predicted values of the optimized formulation. The particle size was 197.8?±?4.9?nm. The polydispersity index of particle size was 0.239?±?0.01 and the zeta potential was 32.7?±?2.6?mV. The entrapment efficiency and dosage loading were about 68.39% and 2.49%, respectively. Fourier transform infrared spectroscopy (FT-IR) study indicated that the drug was entrapped in nanoparticles. The optimized formulation showed a sustained release followed the Peppas model. MTZ-SLNs showed significant prolonged decreasing intraocular pressure effect comparing with MTZ solution in vivo pharmacodynamics studies. The results of acute eye irritation study indicated that MTZ-SLNs and AZOPT both had no eye irritation. Furthermore, the MTZ-SLNs were suitable to be stored at low temperature (4?°C).     

Immobilization of lysine oxidase on a gold–platinum nanoparticles modified Au electrode for detection of lysine

A commercial lysine oxidase (LyOx) from Trichoderma viride was immobilized covalently onto gold nanoparticles (AuNPs) and platinum nanoparticles (PtNPs) electrodeposited onto Au electrode using 3-aminopropyltriethoxy silane (3-APTES) and glutaraldehyde cross linking chemistry. A lysine biosensor was fabricated using LyOx/3-APTES/AuNPs-PtNPs/Au electrode as a working electrode, Ag/AgCl (3 M KCl) as standard electrode and Pt wire as auxiliary electrode connected through a potentiostat. The enzyme electrode was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The cumulative effect of AuNPs and PtNPs showed excellent electrocatalytic activity at low applied potential for detection of H₂O₂, a product of LyOx reaction. The sensor showed its optimum response within 4 s, when polarized at 0.2 V vs. Ag/AgCl in 0.1 M phosphate buffer, pH 7.5 at 30 °C. The linear range and detection limit of the sensor were 1.0–600 μM and 1.0 μM (S/N = 3), respectively. Biosensor measured lysine level in sera, milk and amino acid tablet, which correlated well with those by standard HPLC method. The enzyme electrode lost 50% of its initial activity after 200 uses over a period of 4 months.     

Direct electrochemical immunoassay based on a silica nanoparticles/sol–gel composite architecture for encapsulation of immunoconjugate

A highly hydrophobic and non-toxic colloidal silica nanoparticle/polyvinyl butyral sol–gel composite membrane was prepared on a platinum wire electrode. With diphtheria-toxoid (D-Ag) as a model antigen and encapsulation of diphtheria antibody (D-Ab) in the composite architecture, this membrane could be used for reagentless electrochemical immunoassay. It displayed a porous and homogeneous composite architecture without the aggregation of the immobilized protein molecules. The formation of immunoconjugate by a simple one-step immunoreaction between D-Ag in sample solution and the immobilized D-Ab introduced the change in the potential. Under optimal conditions, the D-Ag analyte could be determined in the linear ranges from 10 to 800 ng ml⁻¹ with a relatively low detection limit of 2.3 ng ml⁻¹ at 3δ. The D-Ag immunosensor exhibited good precision, high sensitivity, acceptable stability, accuracy, and reproducibility. This composite membrane could be used efficiently for the entrapment of different biomarkers and clinical applications.     

Interaction of silver and gold nanoparticles in mammalian cancer: as real topical bullet for wound healing— A comparative study

The present study evaluates in vitro cytotoxic effects and the mode of interaction of biologically synthesized Ag and Au nanoparticles (NPs) using Brassica oleracea L. var. capitata f. rubra (BOL) against HT-1080 cancer cells and bacterial cells as well as their wound healing efficacy using a mouse model. UV–visible spectroscopy, scanning electron microscopy, high-resolution transmission electron microscopy, and energy-dispersive X-ray analysis have ascertained the formation of nano-sized Ag and Au particles. Fourier transform infrared analysis has confirmed that polyphenol and amide groups in BOL act as capping as well as reducing agents. The free radical scavenging activity under in vitro conditions is found to be higher for the Ag NPs when compared to the Au NPs. Acridine orange–ethidium bromide dual staining and comet assay have indicated that the cytotoxic effects are mediated through nuclear morphological changes and DNA damage. The intracellular localization of Ag and Au NPs in HT-1080 cells and their subsequent effect on apoptosis and necrosis were analyzed by flow cytometry while the mode of interaction was established by scanning electron microscopy under field emission mode and by bio-transmission electron microscopy. These methods of analysis clearly revealed that the Ag and Au NPs have easily entered and accumulated into the cytosol and nucleus, resulting in activation of inflammatory and apoptosis pathways, which in turn cause damage in DNA. Further, mRNA and protein expression of caspase-3 and caspase-7, TNF-α, and NF-κB have provided sufficient clues for induction of intrinsic and extrinsic apoptosis and inflammatory pathways in Ag NP- and Au NP-treated cells. Evaluation of wound healing properties of Ag and Au NPs using a mouse model indicates rapid healing of wounds. In addition, no clear toxic effects and no nuclear abnormalities in peripheral blood cells are observed. Ag NPs appear to be a better anticancer therapeutic agent than Au NPs. Nonetheless, both Ag NPs and Au NPs show potential for promoting topical wound healing without any toxic effects.

Open image in new window

Graphical abstract Schematic representation of biological synthesis of Ag and Au NPs and its application on cancer and wound healing:

     

Design of a core–shell type immuno-magnetic separation system and multiplex PCR for rapid detection of pathogens from food samples

We report an immuno-magnetic separation system developed by the immobilization of pathogen-specific antibodies on the core–shell magnetic beads. The magnetic beads were grafted with glycidylmethacrylate (GMA) using surface-initiated atom transfer radical polymerization (SI-ATRP). For immuno-magnetic separation (IMS) of target bacterial cells from others, antibodies for Escherichia coli and Salmonella enterica serovar Typhimurium cells were immobilized on the magnetic beads via glutaraldehyde coupling reaction. Our IMS system successfully separated Salmonella cells when the concentrations of target (i.e., Salmonella) and interfering (i.e., E. coli) cells were at the same level. Polymerase chain reaction (PCR) assays amplifying the rfb/rfbE region of the E. coli genome and a 647-bp fragment of the invA region of Salmonella were performed as the specific selection to accurately confirm the presence of E. coli and Salmonella, respectively. IMS and multiplex PCR methods can be used for specific and quantitative detection of pathogens from food samples. Thus, this study developed a reliable and direct system for rapid detection of Salmonella and E. coli in food samples. In addition, IMS method could be easily adapted to detect other pathogens by selecting the pertinent antibody.     

Targeted Herceptin–dextran iron oxide nanoparticles for noninvasive imaging of HER2/neu receptors using MRI

A novel magnetic resonance imaging (MRI) contrast agent containing Herceptin is reported. The surfaces of superparamagnetic iron oxide nanoparticles were modified with dextran and conjugated with Herceptin (Herceptin–nanoparticles) to improve their dispersion, magnetization, and targeting of the specific receptors on cells. From analytical results, we found that Herceptin–nanoparticles were well dispersed in solutions of various pH range, and had no hysteresis, high saturation magnetization (80 emu/g), and low cytotoxicity to a variety of cells. Notably, the magnetic resonance enhancements for the different breast cancer cell lines (BT-474, SKBR-3, MDA-MB-231, and MCF-7) are proportional to the HER2/neu expression level in vitro. When Herceptin–nanoparticles were administered to mice bearing breast tumor allograft by intravenous injection, the tumor site was detected in T ₂-weighted magnetic resonance images as a 45% enhancement drop, indicating a high level of accumulation of the contrast agent within the tumor sites. Therefore, targeting of cancer cells was observed by in vitro and in vivo MRI studies using Herceptin–nanoparticles contrast agent. In addition, Herceptin–nanoparticles enhancing the magnetic resonance signal intensity were sufficient to detect the cell lines with a low level of HER2/neu expression. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Palladium nanoparticles enzyme aggregate (PANEA) as efficient catalyst for Suzuki–Miyaura reaction in aqueous media

Palladium nanoparticles enzyme aggregate (PANEA) were prepared from Candida antarctica B lipase and palladium salt by precipitation and subsequent in situ Pd nanoparticle formation. This heterogeneous catalyst was successfully used for the Suzuki–Miyaura cross-coupling reaction between bromobenzene with different phenylboronic acid derivatives under mild reaction conditions and using low Pd amount. The nanocatalyst exhibited the highest catalytic activity in a mixture of methanol/water (1:1), obtaining good to excellent product yields from the cross-coupling reaction. A variety of functional groups were accepted and the catalyst was recycled 4 times without activity loss.