Cloning and expression of the gene for neutral protease of Bacillus amyloliquefaciens in Bacillus subtilis

A Bacillus amyloliquefaciens neutral protease gene was cloned and expressed in Bacillus subtilis.The chromosomal DNA of B. amyloliquefaciens strain F was partially digested with restriction endonuclease Sau3AI, and 2 to 9 kb fragments isolated were ligated into the BamHI site of plasmid pUB110. Then, B. subtilis strain 1A289 was transformed with the hybrid plasmids by the method of protoplast transformation and kanamycin-resistant transformants were screened for the formation of large halo on a casein plate. A transformant that produced a large amount of an extracellular neutral protease harbored a plasmid, designated as pNP150, which contained a 1.7 kb insert.The secreted neutral protease of the transformant was found to be indistinguishable from that of DNA donor strain B. amyloliquefaciens by double immunodiffusion test and SDS-polyacrylamide gel electrophoresis.The amount of the neutral protease activity excreted into culture medium by the B. subtilis transformed with pNP150 was about 50-fold higher than that secreted by B. amyloliquefaciens. The production of the neutral protease in the transformant was partially repressed by addition of glucose to the medium.     

Industrial scale of optimization for the production of carboxymethylcellulase from rice bran by a marine bacterium, Bacillus subtilis subsp. subtilis A-53

Rice bran and yeast extract were found to be the best combination of carbon and nitrogen sources for the production of carboxymethycellulase (CMCase) by Bacillus subtilis subsp. subtlis A-53. Optimal concentrations of rice bran and yeast extract for the production of CMCase were 5.0% (w/v) and 0.10% (w/v), respectively. Optimal temperature and initial pH of medium for cell growth of B. subtilus subsp. subtilis A-53 were 35 °C and 7.3, whereas those for the production of CMCase by B. subtilus subsp. subtilis A-53 were 30 °C and 6.8. Optimal agitation speed and aeration rate in a 7 L bioreactor were 300 rpm and 1.0 vvm, respectively. The optimal agitation speed and aeration rate for the production of CMCase by B. subtilus subsp. subtilis A-53 were lower than those for cell growth. The highest productions of CMCase by B. subtilus subsp. subtilis A-53 in 7 and 100 L bioreactors were 150.3 and 196.8 U mL⁻¹, respectively.     

Purification and characterization of carboxymethylcellulase isolated from a marine bacterium, Bacillus subtilis subsp. subtilis A-53

The microorganism hydrolyzing carboxymethylcellulose (CMC) was isolated from seawater, identified as Bacillus subtilis subsp. subtilis by analyses of 16S rDNA and partial sequences of the gyrA gene, and named as B. subtilis subsp. subtilis A-53. The molecular weight of the purified carboxymethylcellulase (CMCase) was estimated to be about 56 kDa with the analysis of SDS-PAGE. The purified CMCase hydrolyzed carboxymethylcellulose (CMC), cellobiose, filter paper, and xylan, but not avicel, cellulose, and p-nitrophenyl-β-d-glucospyranoside (PNPG). Optimal temperature and pH for the CMCase activity were determined to be 50 °C and 6.5, respectively. More than 70% of original CMCase activity was maintained at relative low temperatures ranging from 20 to 40 °C after 24 h incubation at 50 °C. The CMCase activity was enhanced by EDTA and some metal ions in order of EDTA, K⁺, Ni²⁺, Sr²⁺, Pb²⁺, and Mn²⁺, but inhibited by Co²⁺ and Hg²⁺.     

Genetic structure and domains of DNA polymerase III of Bacillus subtilis

Summary We have determined the nucleotide sequence of the polC gene of Bacillus subtilis which codes for DNA polymerase III. Our recent analysis has revealed that the gene comprises 4311 nucleotides, from the start to the stop codon, 306 nucleotides more than we reported earlier. The plasmid reported by us and by N.C. Brown's laboratory contained a sequence at the end of the gene which is not related to the polC region of B. subtilis. We have isolated the rest of the gene, the sequence of which is presented in this paper. The new stop codon is followed by a hyphenated palindromic sequence of 13 nucleotides. The C-terminus' of the coding region contains the novel mutation, dnaF, which results in a defect in the initiation of replication due to a change in the codon TCC to TTC (serine to phenylalanine). The hypermutator mutation mut-1 is due to two point mutations in the 3 to 5 exonuclease domain, the proof reading function. The codon changes are GGA to GAA (glycine to glutamic acid) and AGC to AAC (serine to asparagine). The elongation defective mutation, polC26, affecting the catalytic site that adds nucleotides to the growing chain, is due to a change in the codon GTC to GAC (valine to aspartic acid). It is separated from the mutation reported earlier, azp-12, by 306 nucleotides. Knowing the locations of the mutational sites allowed us to deduce the domains of the gene and the enzyme it encodes, and permitted us to present a precise map of the gene at the molecular level.Abbreviations HPUra p-hydroxyphenyl azouracil - nt nucleotide - PCR polymerase chain reaction     

Peptide syntheses mediated by Bacillus subtilis protease

Bacillus subtilis protease (Amano protease N) was examined as a catalyst for peptide bond formation via both the kinetically and thermodynamically controlled approaches. In general, the latter approach proved to be superior to the former, and a series of dipeptide syntheses and several segment condensations were achieved in good to high yields using the immobilized enzyme on Celite in acetonitrile with low water content.     

A quantitative analysis of shotgun cloning in Bacillus subtilis protoplasts

Summary We used the Escherichia coli-Bacillus subtilis shuttle vector pHP13, which carries the replication functions of the cryptic B. subtilis plasmid pTA1060, to study the effects of BsuM restriction, plasmid size and DNA concentration on the efficiency of shotgun cloning of heterologous E. coli DNA in B. subtilis protoplasts. In a restriction-deficient strain, clones were obtained with low frequency (19% of the transformants contained a recombinant plasmid) and large inserts (>6 kb) were relatively rare (12% of the clones contained inserts in the range of 6–9 kb). The efficiency of shotgun cloning was severely reduced in restricting protoplasts: the class of large inserts (>6 kb) was under-represented in the clone bank (4% of the clones contained inserts in the range of 6–6.1 kb). Furthermore, BsuM restriction caused structural instability of some recombinant plasmids. Transformation of protoplasts with individual recombinant plasmids showed that plasmid size and transforming activity were negatively correlated. The size effect was most extreme with cut and religated plasmid DNA. The yield of clones was independent of the DNA concentration during transformation. It is therefore unlikely that clones were not detected because of simultaneous uptake of more than one plasmid. It is concluded that shotgun cloning in B. subtilis protoplasts is inferior to that in competent cells.     

Genetic recombination in Bacillus subtilis 168: effect of recN, recF, recH and addAB mutations on DNA repair and recombination

A recN^– (recN1) strain of Bacillus subtilis was constructed. The effects of this and recF, recH and addAB mutations on recombination proficiency were tested. Mutations in the recN, recF recH and addAB genes, when present in an otherwise Rec⁺B. subtilis strain, did not affect genetic exchange. Strains carrying different combinations of mutations in these genes were constructed and examined for their sensitivity to 4-nitroquinoline1-oxide (4NQO) and recombination proficiency. The recH mutation did not affect the 4NQO sensitivity of recN and recF cells and it only marginally affected that of addA addB cells. However, it reduced genetic recombination in these cells 10²- to 10⁴-fold. The addA addB mutations increased the 4NQO sensitivity of recF and recN cells, but completely blocked genetic recombination of recF cells and marginally affected recombination in recN cells. The recN mutation did not affect the recombinational capacity of recF cells. These data indicate that the recN gene product is required for, DNA repair and recombination and that the recF, recH and addAB genes provide overlapping activities that compensate for the effects of single mutants proficiency. We proposed that the recF, recH, recB and addA gene products define four different epistatic groups.     

Translational coupling in a penP-lacZ gene fusion in Bacillus subtilis and Escherichia coli: Use of AUA as a restart codon

Summary An out-of-frame fusion between the penicillinase gene (penP) of Bacillus licheniformis and the -galactosidase gene (lacZ) of Escherichia coli was shown to direct the synthesis of an active -galactosidase with the same electrophoretic mobility as the wild-type protein, both in B. subtilis and E. coli. This synthesis was dependent on translation of the truncated penP gene and appeared to result from translational coupling. The fusion point between penP and lacZ contained the sequence AUAG, in which the UAG and AUA codons were in-frame with the penP and lacZ reading units, respectively. N-terminal amino acid sequence analysis of the -galactosidase protein suggested that, both in B. subtilis and E. coli, reinitiation of translation occurred at the AUA codon present at the gene fusion point.     

Molecular characterization of thirteen gyrA mutations conferring nalidixic acid resistance in Bacillus subtilis

We isolated 607 independent nalidixic acid-resistant mutants from Bacillus subtilis. A 163 by DNA segment from a 5 portion of the gyrA gene was amplified from the DNA of each mutant strain. After heat denaturation, the product was subjected to gel electrophoresis to detect conformational polymorphism of single-strand DNA (PCR-SSCP analysis). Mobility patterns of the two DNA strands from all the mutant strains examined differed from those of the parental wild-type strains. The patterns were classified into 13 types, and the DNA sequence of each type was determined. A unique sequence alteration was found in mutants belonging to each of the 13 types, defining 13 gyrA alleles. Eight were single base pair substitutions, four were substitutions of two consecutive base pairs, and one was a substitution of three consecutive base pairs. Only three amino acid residues (Ser-84, Ala-85, and Glu-88) were altered in the deduced amino acid sequences of the mutated genes. We conclude that molecular typing based on the PCR-SSCP method is a powerful technique for the exhaustive identification of allelic variants among mutants selected for a phenotypic trait.     

Cloning and nucleotide sequence of the ptsG gene of Bacillus subtilis

Summary The ptsG gene of Bacillus subtilis encodes Enzyme II^G1c of the phosphoenolpyruvate: glucose phosphotransferase system. The 3 end of the gene was previously cloned and the encoded polypeptide found to resemble the Enzymes III^Glc of Escherichia coli and Salmonella typhimurium. We report here cloning of the complete ptsG gene of B. subtilis and determination of the nucleotide sequence of the 5 end. These results, combined with the sequence of the 3 end of the gene, revealed that ptsG encodes a protein consisting of 699 amino acids and which is similar to other Enzymes II. The N-terminal domain contains two small additional fragments, which share no similarities with the closely related Enzymes II^Glc and II^Nag of E. coli but which are present in the II^G1c-like protein encoded by the E. coli malX gene.     

Production and characterization of a C15-surfactin-O-methyl ester by a lipopeptide producing strain Bacillus subtilis HSO121

A surfactin mono-methyl ester was isolated from the cell broth of Bacillus subtilis HSO121 by acid precipitation, methanol extraction and two-step chromatographic methods. The structure was analyzed by GC/MS, HPLC, ESI Q-TOF MS/MS and NMR. It indicates that this ester is a C₁₅-surfactin-O-methyl ester of which the fatty acid portions are composed of iso-C₁₅ and anteiso-C₁₅ β-hydroxy fatty acids. Based on the critical micelle concentration (CMC) in phosphate buffered saline (PBS, pH 8.0) and the IC₅₀ value on Hela cell lines, the C₁₅-surfactin-O-methyl ester has a stronger surface activity and lower antitumoral effect than C₁₅-surfactin does. It is found that the Glu residues of surfactin-like lipopeptides play a role in their anti-proliferative effects on Hela cells. The possible antitumoral activity of surfactin is discussed in relation to their structures.     

Optimisation of physical factors on the production of active metabolites by Bacillus subtilis 355 against wood surface contaminant fungi

A Surface Response Model was used to study the effect of pH, temperature and agitation on growth, sporulation and production of antifungal metabolites by Bacillus subtilis CCMI 355.Strong agitation, temperature between 27 and 34 °C and pH 6 favoured cell growth. Alkaline pH, strong agitation and temperature between 28 and 34 °C favoured spore formation. No relationship was found between sporulation and the production of antifungal metabolites. According to the model, pH 8, 37 °C and the absence of agitation were the optimal conditions for the production of broad-spectrum antifungal metabolites against Botrytis cinerea, Penicillium expansum, Trichoderma sp, Trichoderma harzianum, Trichoderma koningii and Trichoderma virgatum.In situ assays using green wood impregnated with Bacillus subtilis CCMI 355 inoculated in Yeast Extract Glucose Broth medium in the conditions above, displayed an efficient protection against wood surface contaminant fungi.     

Homologous recombination between plasmid and chromosomal DNA in Bacillus subtilis requires approximately 70 bp of homology

Summary To determine the minimal DNA sequence homology required for recombination in Bacillus subtilis, we developed a system capable of distinguishing between homologous and illegitimate recombination events during plasmid integration into the chromosome. In this system the recombination frequencies were measured between is pE194 derivatives carrying segments of the chromosomal -gluconase gene (bglS) of various lengths and the bacterial chromosome, using selection for erythromycin resistance at the non-permissive temperature. Homologous recombination events, resulting in disruption of the bglS gene, were easily detected by a colorimetric assay for -gluconase activity. A linear dependence of recombination frequency on homology length was observed over an interval of 77 bp. It was found that approximately 70 bp of homology is required for detectable homologous recombination. Homologous recombination was not detected when only 25 by of homology between plasmid and chromosome were provided. The data indicate that homology requirements for recombination in B. subtilis differ from those in Escherichia coli.