Localization and partial characterization of soybean lectin-binding polysaccharide of Rhizobium japonicum.

Immunoelectron microscopy was combined with partial characterization of isolated exopolysaccharide to study binding of soybean lectin by Rhizobium japonicum strain USDA 138. Lectin-binding activity resided in two forms of exopolysaccharide produced during growth: an apparently very high-molecular-weight capsular form and a lower-molecular-weight diffusible form. At low-speed centrifugation, the capsular form cosedimented with cells to form a viscous, white, cell-gel complex which was not diffusible in 1% agar, and the diffusible form remained in the cell-free supernatant. Electron microscopic observation of the cell-gel complex after labeling with soybean lectin-ferritin conjugate revealed that capsular polysaccharides, frequently attached to one end of the cells, were receptors for lectin. The outer membrane of the cell bound no lectin. Various preparations of exopolysaccharide isolated from the culture supernatant were tested for lectin binding, interaction with homologous somatic antigen, and the presence of 2-keto-3-deoxyoctonate and were chromatographed in Sepharose 4B and 6B gel beds. Lectin binding was restricted to a polysaccharide component designated as lectin-binding polysaccharide. This polysaccharide, as present in the cell-free culture supernatant, was a diffusible acidic polysaccharide devoid of 2-keto-3-deoxyoctonate, with a molecular weight of 2 X 10(6) to 5 X 10(6). It was concluded that the soybean lectin-binding component of R. japonicum is an extracellular polysaccharide and not a lipopolysaccharide and that the diffusible lectin-binding polysaccharide probably differs from the very high-molecular-weight lectin-binding polysaccharide of the loose capsule (slime) only in the degree of polymerization.     

Pectic polysaccharides in carrot cells growing in suspension culture

Pectic polysaccharides in the cell wall of suspension-cultured carrot cells (Daucus carota L.) were fractionated into high- and low-molecular-weight components by molecular-sieve chromatography with a Sepharose 4B column. During the phase of cell-wall expansion, the relative content of low-molecular-weight polymers rapidly increased. Electrophoretic analyses of these fractions showed that the high-molecular-weight components were largely composed of neutral and weakly acidic polymers while the low-molecular-weight fraction contained, in addition to neutral polymers, strongly acidic polyuronides in which the content of neutral sugars was very small. The accumulation of a large amount of the strongly acidic polyuronides occurred in a late stage of cell-wall growth, concomitant with a marked decrease in the high-molecular-weight components.Abbreviation MW molecular weight     

Multiantennary group-specific polysaccharide of group B Streptococcus

The group-specific antigen of group B Streptococcus is composed of four different oligosaccharide units of Mw 766 (III), 1277 (II), 1462 (IV), and 1788 (I). The major constituent sugars of the oligosaccharides are alpha-L-rhamnopyranose, alpha-D-galactopyranose, 2-acetamido-2-deoxy-beta-D-glucopyranosyl, and D-glucitol except that III does not contain alpha-D-galactopyranosyl or 2-acetamido-2-deoxy-beta-D-glucopyranosyl residues and IV contains no D-glucitol but has one additional beta-L-rhamnopyranosyl residue. The structures of II and III have been previously elucidated [Michon, F., Katzenellenbogen, E., Kasper, D. L., & Jennings, H. J. (1987) Biochemistry 26, 476-486]. In the group B antigen all the oligosaccharides are linked by one type of phosphodiester bond from O6 of the D-glucitol residue of one oligosaccharide to O6 of the alpha-D-galactopyranosyl residue of the next to form a complex and highly branched multiantennary structure. However, despite the heterogeneous nature of its component oligosaccharides, some order has been identified in the biosynthesis of the group B antigen from chemical and enzymatic sequence studies. Because III lacks an alpha-D-galactopyranosyl residue but has a D-glucitol residue, it is situated at the reducing terminus of all the branches of the group B antigen where it is always adjacent to a II moiety. Conversely, IV has an alpha-D-galactopyranosyl residue but has no D-glucitol and is therefore located at the reducing terminus of the group B antigen where it probably functions as a linker molecule between the group B polysaccharide and the cell wall peptidoglycan of the group B streptococcal organisms. Oligosaccharide I contains two alpha-D-galactopyranosyl residues and one D-glucitol residue and thus constitutes the branch point in the group B antigen, whereas II contains one of each of the above residues and therefore is situated in linear interchain positions. The group B antigen is highly branched and probably has a unique multiantennary structure.     

Hepatitis B surface antigen polypeptides: artifactual bands in sodium dodecyl sulfate-polyacrylamide gel electrophoresis caused by aggregation.

Hepatitis B surface antigen, subtype ad, was purified and studied by sodium dodecyl sulfate-polyacrylamide gel electrophoresis under reducing conditions. Two major bands with molecular weights of 23,500 and 27,500 and several weaker bands with higher molecular weights were observed. When the low-molecular-weight bands and the group of high-molecular-weight bands were excised from the gel, eluted, and reelectrophoresed, neither the low-molecular-weight bands nor the high-molecular-weight bands ever appeared alone, but both high- and low-molecular-weight bands always appeared. It was concluded that the apparently high-molecular-weight bands represented aggregates of the two small polypeptides whose monomers formed the major bands. The preparation thus contained only two polypeptides.     

Synthesis of a low-molecular-weight form of exopolysaccharide by Bradyrhizobium japonicum USDA 110

A novel extracellular low-molecular-weight polysaccharide was detected as a contaminant within extracellular cyclic beta-1,6-beta-1,3-glucan preparations from Bradyrhizobium japonicum USDA 110 cultures. Compositional analysis, methylation analysis, and nuclear magnetic resonance analysis revealed that this low-molecular-weight polysaccharide was composed of the same pentasaccharide repeating unit previously described for the high-molecular-weight form of the exopolysaccharide (EPS) synthesized by B. japonicum strains. Mass spectrometry analysis indicated that the size of this low-molecular-weight form of EPS was consistent with a dimeric form of the pentasaccharide repeating unit.     

Structure and immunochemistry of an oligosaccharide repeating unit of the capsular polysaccharide of type III group B Streptococcus. A revised structure for the type III group B streptococcal polysaccharide antigen

We have derived oligosaccharides from the capsular polysaccharide of type III group B Streptococcus by enzymatic hydrolysis of a specific backbone glycosidic bond utilizing an endo-beta-galactosidase from Flavobacterium keratolyticus. Enzymatic digestion of the polysaccharide produced oligosaccharide fragments of one or more pentasaccharide repeating units. On the basis of 13C NMR, 1H NMR, and methylation analyses, it was established that the smallest digestion fragment was alpha-D-NeupNAc-(2----3)-beta-D-Galp-(1----4)-[beta-D-Glcp-(1----6 )]- beta-D-GlcpNAc-(1----3)-beta-D-Gal. The isolation of this oligosaccharide is consistent with the susceptibility of the beta-D-Galp-(1----4)-beta-D-Glcp linkage in the backbone of the type III group B streptococcal polysaccharide and confirms that the polysaccharide is composed of a pentasaccharide repeating unit. High resolution 13C NMR spectroscopic studies indicated that, as in the case of the pentasaccharide, the terminal sialic acid residues of the type III group B streptococcal polysaccharide were linked to O-3 and not to O-6 of its branch beta-D-galactopyranosyl residues as had been previously reported (Jennings, H. J., Rosell, K.-G., and Kasper, D. L. (1980) Can. J. Chem. 58, 112-120). This linkage was confirmed in an independent methylation analysis of the type III group B streptococcal polysaccharide. Thin layer chromatogram binding assay and radioactive antigen binding assays with radiolabeled oligosaccharides demonstrated the single repeating unit pentasaccharide oligosaccharide to be poorly antigenic. Increasing oligosaccharide size to a decasaccharide consisting of two repeating units resulted in an 8-fold increase in antigen binding in the direct radioactive antigen binding assay. The results suggest that a region of the immunodeterminant site critical for antibody binding is located in the backbone of the polysaccharide and involves the beta-D-galactopyranose-(1----4) beta-D-glucopyranose bond.     

Immunological study of antisera to to artificial O-antigen of Pseudomonas aeruginosa

O-sera were obtained by immunizing rabbits with artificial antigens: polysaccharide extracted from the lipopolysaccharide of P. aeruginosa (strain No. 868; 03a, 3d, 3e), or the high-molecular-weight or low-molecular-weight fraction of this polysaccharide, complexed with a natural protein (human IgG or rabbit globulin). The antisera to these antigenic complexes were highly O-specific. Antisera to the complexes of polysaccharide-protein and high-molecular-weight fraction-protein were more active in the passive haemagglutination reaction, slide agglutination test and immunodiffusion test in agar gel than was antiserum to the low-molecular-weight fraction-protein complex. The artificial antigens prepared and employed in the study are apt to be used for the preparation of monospecific immune sera.     

Changes in non-cellulosic cell-wall polysaccharides during the growth of carrot cells in suspension cultures

The cell-wall composition of carrot (Daucus carota L.) cells has been studied during their growth in suspension culture. Pectic and hemicellulosic polymers were fractionated according to molecular size by a Sepharose 4B column. Polyuronides in the pectic fraction were resolved into high- and low-molecular-weight components. The low-molecular-weight polyuronides were relatively free of neutral sugars and showed a marked increase during the growth of the cell wall. Hemicellulosic polysaccharides were of disperse molecular size. As cell expansion proceeded, the contents of glucose and xylose in the high-molecular-weight region increased while those in the low-molecular-weight fraction decreased. Removal of auxin from the medium apparently caused degradation of high-molecular-weight polymers in both the pectic and hemicellulosic fractions.     

Structural determination and immunochemical characterization of the type V group B Streptococcus capsular polysaccharide

The type V capsular polysaccharide of group B Streptococcus has been isolated and purified, and its repeating unit structure determined. The native type V polysaccharide contains D-glucose, D-galactose, 2-acetamido-2-deoxy-D-glucose, and sialic acid in a molar ratio of 3:2:1:1. Methylation analysis and 1H NMR and 13C NMR analysis of the native type V polysaccharide and of its specifically degraded products permitted the determination of the repeating unit structure of the type V polysaccharide: [formula: see text] The type V polysaccharide has certain structural features in common with other group B streptococcal capsular polysaccharides but is antigenically distinct: no immunologic cross-reactivity was observed between type V and types Ia, Ib, II, III, or IV polysaccharides. Studies of antibody binding to the partially degraded forms of the type V polysaccharide indicated that the native epitope is complex, involving most if not all of the sugar residues of the repeating unit.     

Synthesis of a Low-Molecular-Weight Form of Exopolysaccharide by Bradyrhizobium japonicum USDA 110

A novel extracellular low-molecular-weight polysaccharide was detected as a contaminant within extracellular cyclic β-1,6-β-1,3-glucan preparations from Bradyrhizobium japonicum USDA 110 cultures. Compositional analysis, methylation analysis, and nuclear magnetic resonance analysis revealed that this low-molecular-weight polysaccharide was composed of the same pentasaccharide repeating unit previously described for the high-molecular-weight form of the exopolysaccharide (EPS) synthesized by B. japonicum strains. Mass spectrometry analysis indicated that the size of this low-molecular-weight form of EPS was consistent with a dimeric form of the pentasaccharide repeating unit.     

Protective efficacy against group B streptococcal infection in neonatal mice delivered from preimmunized pregnants

Neonatal mice delivered from mothers preimmunized with heated or formalinized whole cell vaccines of type Ia, Ia/c and III/c group B streptococci were infected with each type of bacteria, and then serum antibodies of mothers and neonates who survived the experiments were measured by enzyme-linked immunosorbent assay. The relationship between the protectivity in neonate mice and the antibody titers to the type specific polysaccharide antigens and the protein c antigen of their sera were examined. In the Ia-immunized group which showed high protection against the type Ia infection, anti-Ia IgG antibody titers were low, and anti-protein c IgG antibody was not detected. Type Ia/c and III/c vaccines were highly effective against both type Ia/c and III/c infection, but less effective in type Ia infection. The protein c antigen was identified in both type strains by the double diffusion assay, and the IgG antibodies to the protein c were significantly high in sera of both maternal mice immunized with types Ia/c or III/c organisms and their newborn infants. High titers of the protein c IgG antibody retained 3 to 4 weeks after the last injection of vaccines which corresponded to the period of pregnancy and lactation. Small amounts of IgM antibody to all antigens were detected only in maternal sera. These results suggest that IgG antibodies to the protein c antigen and to the type-specific polysaccharide antigens are equally important protective factors which are transferable from preimmunized mothers to their newborn infants through placenta and/or lactation.     

Covalent linkage of the type- and group-specific antigens to the peptide moiety of the peptidoglycan of serotype III group BStreptococcus

The attachment sites for the two major cell wall polysaccharides, the type-and group-specific antigens of a serotype III group B streptococcus (GBS) were investigated with [14C]lysine to label the peptide portion of the peptidoglycan and [3H]acetate to label both polysaccharide antigens as well as the glycan backbone of the peptidoglycan. Mutanolysin-treated cell walls were subjected to trypsin digestion, followed by exhaustive beta-elimination with 6N ammonium hydroxide at 37°C. The resulting products were purified by column chromatography prior to chemical, immunological, and high-voltage electrophoresis analyses. Data from these studies indicated that both cell wall polymers are covalently attached to the peptidoglycan via the peptide unit. Additionally, during synthesis and assembly both antigens attached only to nascent peptidoglycan.     

Initiation and synthesis of the Streptococcus pneumoniae type 3 capsule on a phosphatidylglycerol membrane anchor

The type 3 synthase from Streptococcus pneumoniae is a processive beta-glycosyltransferase that assembles the type 3 polysaccharide [3)-beta-D-GlcUA-(1-->4)-beta-D-Glc-(1-->] by a multicatalytic process. Polymer synthesis occurs via alternate additions of Glc and GlcUA onto the nonreducing end of the growing polysaccharide chain. In the presence of a single nucleotide sugar substrate, the type 3 synthase ejects its nascent polymer and also adds a single sugar onto a lipid acceptor. Following single sugar incorporation from either UDP-[(14)C]Glc or UDP-[(14)C]GlcUA, we found that phospholipase D digestion of the Glc-labeled lipid yielded a product larger than a monosaccharide, while digestion of the GlcUA-labeled lipid resulted in a product larger than a disaccharide. These data indicated that the lipid acceptor contained a headgroup and that the order of addition to the lipid acceptor was Glc followed by GlcUA. Higher-molecular-weight product synthesized in vitro was also sensitive to phospholipase D digestion, suggesting that the same lipid acceptor was being used for single sugar additions and for polymer formation. Mass spectral analysis of the anionic lipids of a type 3 S. pneumoniae strain demonstrated the presence of glycosylated phosphatidylglycerol. This lipid was also observed in Escherichia coli strains expressing the recombinant type 3 synthase. The presence of the lipid primer in S. pneumoniae membranes explained both the ability of the synthase to reinitiate polysaccharide synthesis following ejection of its nascent chain and the association of newly synthesized polymer with the membrane. Unlike most S. pneumoniae capsular polysaccharides, the type 3 capsule is not covalently linked to the cell wall. The present data indicate that phosphatidylglycerol may anchor the type 3 polysaccharide to the cell membrane.     

Degradable-brushed pHEMA-pDMAEMA synthesized via ATRP and click chemistry for gene delivery

Brushed polymers composed of a backbone of poly(hydroxyethyl methacrylate) (pHEMA) onto which poly(2-(dimethylamino)ethyl methacrylate)s (pDMAEMAs) was grafted via a hydrolyzable linker were synthesized and evaluated as nonviral gene delivery vectors. Both pDMAEMA and pHEMA polymers with controlled molecular weights and narrow distributions were synthesized by controlled atom transfer radical polymerization (ATRP). The azide initiator was used to ensure complete and monoazide functionalization of the pDMAEMA polymer chains. Click reaction between pHEMA with alkyne side groups and the azide end group in the pDMAEMA resulted in a high-molecular-weight polymer composed of low-molecular-weight constituents via an easily degradable carbonate ester linker. The length of the pDMAEMA grafts as well as the number of grafts of the brushed pHEMA-pDMAEMA can be easily varied. At physiological conditions (pH 7.4 and 37 degrees C), the brushed polymer degraded by hydrolysis of the carbonate ester with a half-life of 96 h. The molecular weights of the formed degradation products was very close to that of the starting pDMAEMA, which is likely below the renal excretion limit (<30 kDa). It was shown that the degradable brushed pHEMA-pDMAEMAs were able to condense plasmid DNA into positively charged nanosized particles. The resulting polyplexes were able to transfect cells efficiently in the presence of the endosomal membrane disrupting INF-7 peptide, and all these degradable polymers showed lower cellular toxicity compared to a high-molecular-weight pDMAEMA reference. On the other hand, the low-molecular-weight pDMAEMA used for the grafting to pHEMA was neither able to condense the structure of DNA nor able to transfect cells. This study demonstrates that grafting a low-molecular-weight cationic polymer via a hydrolyzable linker to a neutral hydrophilic polymer is an effective approach to modulate the transfection activity and toxicity profile of gene delivery polymers.     

High-molecular-weight renin converting enzyme from dog kidney: detection and fractionation

Renal cortical high-molecular-weight renin (Mw:60,000) of the dog is a complex of renin (low-molecular-weight renin; Mw:40,000) and a renin binding protein. We detected an enzyme-like substance that catalyzes the conversion from high- into low-molecular-weight renin. When the renal cortical extract was added to the high-molecular-weight renin and the preparation incubated at 37 degrees C for 30 min, the high-molecular-weight renin was converted into the low-molecular-weight form. No such conversion occurred in the case of renal medullary extract. This converting substance was fractionated using concanavalin A Sepharose, 70% ammonium sulfate saturation and DEAE-cellulose chromatography. The converting activity was inhibited by potassium tetrathionate, N-ethylmaleimide and 5,5'-dithiobis-(2-nitrobenzoic acid). These events suggest that this substance is an enzyme possessing sulfhydryl moieties. However, a cathepsin B inhibitor leupeptin did not affect the activity. Accordingly, the high-molecular-weight renin converting enzyme, which is sensitive to sulfhydryl oxidation, may explain the mechanism of interconversion between high- and low-molecular-weight renin involving the oxidation-reduction of tissue sulfhydryl groups.     

Translocation of group 1 capsular polysaccharide to the surface of Escherichia coli requires a multimeric complex in the outer membrane

Surface expression of the group 1 K30 capsular polysaccharide of Escherichia coli strain E69 (O9a:K30) requires Wza(K30), a member of the outer membrane auxiliary (OMA) protein family. A mutation in wza(K30) severely restricts the formation of the K30 capsular structure on the cell surface, but does not interfere with the biosynthesis or polymerization of the K30 repeat unit. Here we show that Wza(K30) is a surface-exposed outer membrane lipoprotein. Wza(K30) multimers form ring-like structures in the outer membrane that are reminiscent of the secretins of type II and III protein translocation systems. We propose that Wza(K30) forms an outer membrane pore through which the K30-capsular antigen is translocated. This is the first evidence of a potential mechanism for translocation of high molecular weight polysaccharide across the outer membrane. The broad distribution of the OMA protein family suggests a similar process for polysaccharide export in diverse Gram-negative bacteria.     

The type antigen III of group F streptococci separation of group and type antigens and partial characterization of type III antigen

Polysaccharides extracted from Z₃III streptococci either with formamide or with dilute hydrochloric acid or isolated from the growth medium could be fractionated in type III- and group Z₃ antigens by alcohol precipitation. No good separation could be obtained from TCA extracts. When the same extractions and fractionations were applied to streptococci carrying type III antigen, but different group antigens, good separations were again obtained of all formamide extracts, but not of all hydrochloric acid extracts. The group antigens showed a rhamnose content of at least 50% and contained hexosamines. Type III antigens contained mainly rhamnose, glucose and galactose in relative amounts of approximately 1:2:3. Analysis of the methylated type III antigen suggests it to be a polysaccharide with a linear structure. Type III antigen isolated from the medium was characterized not only by a different sugar ratio, but also by its fucose content of 20%. In some cases the purified polysaccharides contained considerable amounts of glycogen-like material. Partial acid hydrolysis of the type III antigen extracted with formamide yielded a great number of oligosaccharides. Analyses, inhibition reactions and methylation studies gave indications that the most probable structure of a determinant group of type III antigen is β-glucosyl-(1-6)-galactosyl-(1-6)-galactosyl-(1-3)-rhamnose. The possibility of the existence of a second determinant group is discussed.     

Characterization of CMP-N-acetylneuraminic acid synthetase of group B streptococci.

The capsular polysaccharide is a critical virulence factor for group B streptococci associated with human infections, yet little is known about capsule biosynthesis. We detected CMP-Neu5Ac synthetase, the enzyme which activates N-acetylneuraminic acid (Neu5Ac, or sialic acid) for transfer to the nascent capsular polysaccharide, in multiple group B streptococcus serotypes, all of which elaborate capsules containing Neu5Ac. CMP-Neu5Ac synthetase isolated from a high-producing type Ib strain was purified 87-fold. The enzyme had apparent Km values of 7.6 for Neu5Ac and 1.4 for CTP and a pH optimum of 8.3 to 9.4, required magnesium, and was stimulated by dithiothreitol. This is the first characterization of an enzyme involved in group B streptococcus capsular polysaccharide biosynthesis.     

Oligomerization of oncoprotein p53

Cellular phosphoprotein p53, which seems to be a multifunctional protein, may be assigned to different structural subclasses. Recently established immortalized or transformed cell lines that overexpress p53 allowed us to perform a detailed analysis of the quaternary structure of p53. By means of sucrose density gradient centrifugation, we found in simian virus 40-transformed cells that overexpress p53, in addition to high-molecular-weight T-p53 complexes, low-molecular-weight forms. The level of T-p53 complexes within simian virus 40-transformed cells seemed to be determined by the intracellular concentration of p53. However, the presence of uncomplexed T antigen and p53 indicated that an appropriate modification of at least one of the two proteins appears to be necessary for complex formation. Using different monoclonal antibodies that distinguish between (i) p53 associated with T antigen or heat shock proteins and (ii) p53 in apparently free form, we found p53 from transformed cells always in high-molecular-weight forms. p53 from normal and immortalized cells, however, was found mainly in low-molecular-weight forms. Pulse-labeling experiments revealed that oligomerization of p53 is a very rapid process. Monomeric forms of p53 which could be detected only by 2 min of pulse-labeling were rapidly converted to stable, high-molecular-weight oligomers. Furthermore, our data indicate a correlation between the occurrence of p53 in high-molecular-weight forms and the transformation state of the cell.     

Influence of oligomerization state on the structural properties of invasion plasmid antigen B from Shigella flexneri in the presence and absence of phospholipid membranes

Shigella flexneri causes bacillary dysentery, an important cause of mortality among children in the developing world. Shigella secretes effector proteins via its type III secretion system (T3SS) to promote bacterial uptake into human colonic epithelial cells. The T3SS basal body spans the bacterial cell envelope anchoring a surface‐exposed needle. A pentamer of invasion plasmid antigen D lies at the nascent needle tip and invasion plasmid antigen B (IpaB) is recruited into the needle tip complex on exposure to bile salts. From here, IpaB forms a translocon pore in the host cell membrane. Although the mechanism by which IpaB inserts into the membrane is unknown, it was recently shown that recombinant IpaB can exist as either a monomer or tetramer. Both of these forms of IpaB associate with membranes, however, only the tetramer forms pores in liposomes. To reveal differences between these membrane‐binding events, Cys mutations were introduced throughout IpaB, allowing site‐specific fluorescence labeling. Fluorescence quenching was used to determine the influence of oligomerization and/or membrane association on the accessibility of different IpaB regions to small solutes. The data show that the hydrophobic region of tetrameric IpaB is more accessible to solvent relative to the monomer. The hydrophobic region appears to promote membrane interaction for both forms of IpaB, however, more of the hydrophobic region is protected from solvent for the tetramer after membrane association. Limited proteolysis demonstrated that changes in IpaB's oligomeric state may determine the manner by which it associates with phospholipid membranes and the subsequent outcome of this association. Proteins 2014; 82:3013–3022. © 2014 Wiley Periodicals, Inc.