Hydrolytic and enzymatic degradation of liquid-crystalline aromatic/aliphatic copolyesters

Aromatic/aliphatic copolyesters containing hydrophilic moieties in the main chain or side chain were synthesized by bulk polycondensation of aromatic monomers without or with solubilizing substituents and aliphatic monomers. Hydrolytic and enzymatic degradation studies were carried out in vitro at 37 degrees C in pH 7.4 phosphate buffer and in Tris-HCl buffer containing proteinase K. The results indicate that liquid-crystalline aromatic/aliphatic copolyesters are degradable hydrolytically as well as enzymatically. The change in composition and morphology of the polyester films were monitored by nuclear magnetic resonance and scanning electron microscopy. The results suggested that aromatic species and aliphatic moieties could be released into aqueous solution during hydrolytic degradation of aromatic/aliphatic copolyesters with ethyleneoxy groups on the side chain. Modifying aromatic species with hydrophilic groups in aromatic/aliphatic copolyesters was an efficient method to improve degradability and biocompatibility due to improved solubility of degradation products in aqueous solution. Mechanical tests indicated that the copolyesters exhibited good mechanical properties prior to degradation, which can be of relevance for bone tissue engineering.     

Chemical composition distribution of bacterial copolyesters.

Poly(3-hydroxybutyrate) [P(3HB)] and its copolymers with hydroxyalkanoates are naturally occurring thermoplastic materials produced by bacteria. There are many potential uses for these copolyesters owing to their biodegradability and biocompatibility. The physical properties of the copolyesters vary depending on the chemical structure as well as the composition of the comonomers. Usually, we expect, copolymers to have a narrow chemical composition distribution (CCD). Several reports, however, have pointed out that some bacterial copolyesters have broad and/or multimodal CCD. Fractionation based on the chemical composition has also been reported for several bacterial copolyester samples. In this review, the literature concerning CCD and fractionation based on chemical composition is summarized. The width of CCD is approximated based on the data of diad sequence distribution. Generality of the complex CCD in bacterial copolyesters is also discussed.     

Enzymatic and non-enzymatic degradation of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) copolyesters produced by Alcaligenes sp. MT-16

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(3HB-co-3HV), copolyesters with a variety of 3HV contents (ranging from 17 to 60 mol%) were produced by Alcaligenes sp. MT-16 grown on a medium containing glucose and levulinic acid in various ratios, and the effects of hydrophilicity and crystallinity on the degradability of the copolyesters were evaluated. Measurements of thermo-mechanical properties and Fourier-transform infrared spectroscopy in the attenuated total reflectance revealed that the hydrophilicity and crystallinity of poly(3HB-co-3HV) copolyesters decreased as 3HV content in the copolyester increased. When the prepared copolyester film samples were non-enzymatically hydrolysed in 0.01 N NaOH solution, the weights of all samples were found to have undergone no changes over a period of 20 weeks. In contrast, the copolyester film samples were degraded by the action of extracellular polyhydroxybutyrate depolymerase from Emericellopsis minima W2. The overall rate of weight loss was higher in the films containing higher amounts of 3HV, suggesting that the enzymatic degradation of the copolyester is more dependent on the crystallinity of the copolyester than on its hydrophilicity. Our results suggest that the degradability characteristics of poly(3HB-co-3HV) copolyesters, as well as their thermo-mechanical properties, are greatly influenced by the 3HV content in the copolyesters.     

Biosynthesis of novel copolyesters containing 3-hydroxypivalic acid by Rhodococcus ruber NCIMB 40126 and related bacteria

Rhodococcus ruber and related Gram-positive bacteria synthesized and accumulated novel copolyesters containing 3-hydroxypivalic acid as constituent if the cells were cultivated in a mineral salts medium containing 3-hydroxypivalic acid and glucose as carbon sources. The copolyesters contributed 0.4–10% of the cellular dry mass, and they contained up to 78 mol% of 3-hydroxypivalic acid in addition to 3-hydroxybutyric acid and 3-hydroxyvaleric acid; a homopolyester of 3-hydroxypivalic acid was also synthesized under certain conditions. The presence of 3-hydroxypivalic acid in the accumulated copolyesters was confirmed by nuclear magnetic resonance spectrometry as well by coupled gas chromatography/mass spectrometry. This is the first time that the incorporation of 3-hydroxypivalic acid and therefore of a hydroxyalkanoic acid with two methyl group substituents at the α-carbon atom in a naturally occurring copolyester is reported. It indicates that 3-hydroxypivalic acid-coenzyme A is accepted by polyhydroxyalkanoic acid synthase as a substrate.     

Characterization by mass spectrometry of poly(3-hydroxyalkanoates) produced by Rhodospirillum rubrum from 3-hydroxyacids.

The sequence distributions of two microbial copolyesters obtained by fermentation of Rhodospirillum rubrum, grown with 3-hydroxyhexanoic or 3-hydroxyheptanoic acids, were determined by analyzing the oligomers prepared by partial pyrolysis or partial methanolysis of these copolyesters using fast atom bombardment mass spectrometry (FAB-MS). Oligomers up to pentamers were identified in the case of partial pyrolysis and up to tetradecamers in the case of partial methanolysis. The comparison between the experimental and calculated peak intensities of FAB mass spectra allows the calculation of compositions and sequence distributions, which in these copolyesters follow Bernoullian statistics, indicating that they are random terpolyesters.     

Sequence distribution in microbial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) co-polyesters determined by NMR and MS

The microstructure of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolyesters (PHBV) as well as a mixture of two PHBV copolyesters of different comonomer composition and sequence distribution was studied by 13C NMR based on dyad and triad analysis and multistage electrospray ionization mass spectrometry (ESI-MSn). Both techniques gave results that were in good agreement for all investigated samples. The effect of microstructure on PHBV thermal properties was investigated from the melting behavior of samples. A PHBV copolyester with randomly distributed hydroxyvalerate units (12.0 mol % HV) showed a single melting peak, whereas samples with nonrandom composition distribution showed multiple melting peaks in their thermograms. Such complex melting behavior suggested that the 12.9 and 27.1 mol % PHBV copolyesters were actually blends of several copolymers with widely different comonomer-unit composition.     

Biotechnological production of (R)-3-hydroxybutyric acid monomer

The escalating problems regarding the treatment of plastic waste materials have led to development of biodegradable plastics. At present, a number of aliphatic polyesters; such as poly[(R)-3-hydroxybutyrate] (PHB), poly(l-lactide), polycaplolactone, poly(ethylene succinate) and poly(butylene succinate) have been developed. Among these aliphatic polyesters, PHB is one of the most attractive since it can undergo biodegradation at various environmental conditions and has properties similar to polypropylene. Although much effort has been made to produce PHB and its copolyesters from renewable resources or through microbial processes, their commercialization and widespread application are still not economically attractive compared to conventional non-biodegradable plastic. Moreover, wide application of PHB and its copolyesters as biodegradable plastic have not only been limited by the cost of production but also by their stinky smell during industrial processing. However, (R)-3-hydroxybutyric acid, a monomer of PHB has wide industrial and medical applications. (R)-3-hydroxybutyric acid can also serve as chiral precursor for synthesis of pure biodegradable PHB and its copolyesters. A number of options are available for production of (R)-3-hydroxybutyric acid. This review discusses each of these options to assess the alternatives that exist for production of pure biodegradable PHB and its copolyesters with good properties.     

Production of poly(3-hydroxyalkanoates-co-3-hydroxy-ω-fluoroalkanoates) byPseudomonas oleovorans from 1-fluorononane and gluconate

Summary Pseudomonas oleovorans grew well and synthesized copolyesters of 3-hydroxyalkanoates and 3-hydroxy--fluoroalkanoates in the mineral medium containing 1-fluorononane and sodium gluconate. The content of fluorinated units in copolyesters could be controlled from 0 to 40 mol%. The copolyesters were shown to have a random sequence distribution of different monomeric units by analysis of the¹³C NMR spectra. The melting temperatures of copolyesters were 52–58°C, and the enthalpy of fusion decreased with the content of fluorinated units.     

Cometabolic biosynthesis of copolyesters consisting of 3-hydroxyvalerate and medium-chain-length 3-hydroxyalkanoates by Pseudomonas sp. DSY-82

A newly isolated strain, designated as Pseudomonas sp. DSY-82, synthesized medium-chain-length polyhydroxyalkanoate (MCL-PHA) copolyesters when grown on alkanoates from hexanoate to undecanoate as the sole carbon source. When used alone, butyrate and valerate supported the growth of the isolate but not PHA production. However, unusual polyesters containing 3-hydroxyvalerate, as well as various MCL 3-hydroxyalkanoate monomeric units, were synthesized when valerate was cofed with either nonanoate or 10-undecenoate, suggesting the formation of monomer units from both substrates. Concentrations of 3-hydroxyvalerate, 3-hydroxyoctanoate, and 3-hydroxydecanoate in the PHAs produced were significantly elevated by the addition of valerate, indicating that the incorporation of these monomer units to PHA occurred primarily through cometabolism. The total amount of these monomer units in the PHAs reached up to 30%. The PHAs produced in this study were most likely random copolyesters as determined by differential scanning calorimetric analysis. This is the first case of microbial synthesis of copolyesters consisting of 3-hydroxyvalerate and MCL 3-hydroxyalkanoate monomer units through cometabolism.     

Biosynthesis of Novel Aromatic Copolyesters from Insoluble 11-Phenoxyundecanoic Acid by Pseudomonas putida BM01

Two types of novel aromatic copolyesters were synthesized from 11-phenoxyundecanoic acid (11-POU) as the sole carbon source and the cosubstrates 11-POU and octanoate, respectively, by isolated Pseudomonas putida BM01 that is known to accumulate high concentrations of medium-chain-length polyesters. Insoluble 11-POU was recrystallized in situ in buffer by alkaline treatment and pH adjustment, followed by autoclaving. The resulting microcrystals, whose structure was different from that of the commercially available crystalline powder, suspended in media were rapidly consumed by the bacterium. Synthesized polymers were characterized by gas chromatography, nuclear magnetic resonance spectroscopy, and differential scanning calorimetry. The aromatic copolyesters synthesized from 11-POU were composed of two monomer units consisting of 3-hydroxy-5-phenoxyvalerate (5POHV) as the major component (72 to 85 mol%) and 3-hydroxy-7-phenoxyheptanoate (7POHH) as the minor component (15 to 28 mol%). The aromatic copolyesters showed a crystalline melting transition at 70(deg)C. When the bacterium was grown on the cosubstrates 11-POU and octanoate, the bacterium synthesized the copolyesters composed of aromatic and aliphatic monomers poly(5POHV-co-7POHH-co-3-hydroxy-9-phenoxynonanoate-co-3-hydroxyalkanoates) . The addition of octanoate in the feed shifted the major monomer unit in the polymer from 5POHV to 7POHH. A further-fragmented metabolite, 3-phenoxypropionate, whose concentration reached a steady state at the time of greatest polyester accumulation, was detected in the medium. The metabolic pathway of 11-POU is suggested.     

Side-chain effect of second monomer units on crystalline morphology, thermal properties, and enzymatic degradability for random copolyesters of (R)-3-hydroxybutyric acid with (R)-3-hydroxyalkanoic acids

Three types of random copolymers with 94 mol % (R)-3-hydroxybutyric acid (3HB) and 6 mol % (R)-3-hydroxyalkanoic acids with different side-chain lengths, (R)-3-hydroxypentanoic acid (3HV), (R)-3-hydroxyhexanoic acid (3HHx), and medium-chain-length (R)-3-hydroxyalkanoic acids (mcl-3HA, C8-C12), were prepared by biological synthetic techniques. The solid-state structure and thermal properties of melt-crystallized films for copolymers were characterized by means of wide-angle X-ray diffraction, small-angle X-ray scattering, differential scanning calorimetry, and optical microscopy. The randomly distributed second monomer units, except for 3HV in copolyesters, act as defects of the P(3HB) crystal and are excluded from the P(3HB) crystalline lamellae. The lamellar thickness of copolymers decreased with an increase in the side-chain length of second monomer units. In addition, the growth rate of spherulites decreased with an increase in the carbon numbers of second monomer units at an identical crystallization temperature. These results indicate that a steric bulkiness of the second monomer unit affects the crystallization of (R)-3HB segments in random copolyesters. An enzymatic degradation test of melt-crystallized copolymer films was carried out in the presence of PHB depolymerase from Alcaligenes faecalis T1. Erosion rate of copolyesters was dependent on both the crystallinity and the lamellar thickness of samples. As the result, the rate of enzymatic degradation for copolymer films increased with an increase in the carbon numbers of second monomer units.     

Production of biodegradable copolyesters of 3-hydroxybutyrate and 4-hydroxybutyrate by Alcaligenes eutrophus

Summary New copolyesters of 3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB) were produced by Alcaligenes eutrophus from various carbon sources of 4-hydroxybutyric acid, 4-chlorobutyric acid, 1,4-butanediol, and -butyrolactone. The composition of copolyesters varied from 0 to 37 mol% 4HB, depending on the carbon sources supplied. The biosynthetic pathway of copolyesters has been discussed. The copolyester film was biodegradable in soil and activated sludge. The rate of biodegradation was enhanced by the presence of 4HB units.     

Polymers of malic acid and 3-alkylmalic acid as synthetic PHAs in the design of biocompatible hydrolyzable devices.

Poly(beta-malic acid) and poly(beta-3-alkylmalic acid) derivatives, as synthetic polyhydroxyalkanoates (PHAs), present several advantages as macromolecular materials for temporary biomedical applications. Indeed, such polymers, which can be synthesized through different chemical and biological routes, have cleavable ester bonds in their backbone for hydrolytic degradation, stereogenic centres in the monomers units for controlling the macromolecular structure. bioassimilable or non-toxic repeating units and lateral chemical functions which can be adapted to specific requirements. The strategy for building such complex architectures, with one or several specific pendant groups, is based on the anionic ring-opening polymerization or copolymerization of the large family of malolactonic and 3-alkylmalolactonic acid esters. Because we are able to control the monomer synthesis and the polymerization step, we have been able to prepare different degradable materials for the biomedical field, such as: degradable associating networks made up by the association of random copolyesters containing a small percentage of hydrophobic moieties and beta-cyclodextrin copolymers; degradable macromolecular micelles constituted by degradable amphiphilic block copolymers of poly(beta-malic acid) as hydrophilic segments and poly(beta-alkylmalic acid alkyl esters) as hydrophobic blocks; and degradable nanoparticles made up by hydrophobic poly(beta-malic acid alkyl esters) derivatives. We have also prepared a terpolymer which exhibits growth factor-like properties in vivo. Finally, poly(beta-malic acid) has been used as an additive in the preparation of peritoneal dialysis bags.     

Synthesis, cocrystallization, and enzymatic degradation of novel poly(butylene-co-propylene succinate) copolymers

A series of poly(butylene-co-propylene succinate) (PBPSu) random copolyesters were synthesized and characterized using 1HNMR spectroscopy and viscometry. Tensile properties decreased with increasing propylene succinate (PSu) content. Cocrystallization and multiple melting behaviors were investigated. The copolymers showed a eutectic behavior. The minimum melting point corresponded to 75 mol % PSu. Wide-angle X-ray diffraction (WAXD) patterns showed that the copolymers with up to 60 mol % PSu units formed poly(butylene succinate) crystals. The interplanar spacings slightly differentiated. The copolymer with 11.5 mol % poly(propylene succinate) (PPSu) units formed PPSu crystals. The results indicated isodimorphic cocrystallization. The cocrystallization was thermodynamically analyzed using the Wendling-Suter model. The defect free energy decreased for copolymers with high PPSu content. The banded spherulites of the copolyesters were studied, and growth rates were analyzed using the Lauritzen-Hoffman theory. Enzymatic hydrolysis study, using Rhizopus delemar and Pseudomonas cepacia lipases, showed that degradation was faster for copolymers with high PSu content, compared even to the fast-degrading PPSu.     

Syntheses and physical characterization of new aliphatic triblock poly(L-lactide-b-butylene succinate-b-L-lactide)s bearing soft and hard biodegradable building blocks

This study presents chemical syntheses and physical characterization of a new aliphatic poly(L-lactide-b-butylene succinate-b-L-lactide) triblock copolyester with soft and hard biodegradable building blocks. First, poly(butylene succinate) (PBS) prepolymers terminated with hydroxyl functional groups were synthesized through melt polycondensation from succinic acid and 1,4-butanediol. Further, a series of new PLLA-b-PBS-b-PLLA triblock copolyesters bearing various average PLLA block lengths were prepared via ring opening polymerization of L-lactide with the synthesized hydroxyl capped PBS prepolymer (Mn = 4.9 KDa) and stannous octanoate as the macroinitiator and catalyst, respectively. By means of GPC, NMR, FTIR, DSC, TGA, and wide-angle X-ray diffractometer (WAXD), the macromolecular structures and physical properties were intensively studied for these synthesized PBS prepolymer and PLLA-b-PBS-b-PLLA triblock copolyesters. 13C NMR and GPC experimental results confirmed the formation of sequential block structures without any detectable transesterification under the present experimental conditions, and the molecular weights of triblock copolyesters could be readily regulated by adjusting the feeding molar ratio of L-lactide monomer to the PBS macroinitiator. DSC measurements showed all single glass transitions, and their glass transition temperatures were found to be between those of PLLA and PBS, depending on the lengths of PLLA blocks. It was noteworthy that the segmental flexibilities of the hard PLLA blocks were found to be remarkably enhanced by the more flexible PBS block partner, and the PBS and PLLA building blocks were well mixed in the amorphous regions. Results of TGA analyses indicated that thermal degradation and stabilities of the PLLA blocks strongly depended on the average PLLA block lengths of triblock copolyesters. In addition, FTIR and WAXD results showed the coexistence of the assembled PLLA and PBS crystal structures when the average PLLA block length became larger than 7.8. These results may be beneficial for this new biodegradable aliphatic triblock copolyester to be applied as a potential biomaterial.     

Biodegradation of synthetic polymers by composting and fungal treatment

Two types of copolymers--poly(ester-amide)s--by the anionic copolymerization of epsilon-caprolactam and epsilon-caprolactone, and aromatic-aliphatic copolyesters based on glycolyzed polyethylene terephthalate from used beverage bottles and epsilon-caprolactone were prepared. Biodegradation tests of these copolymers were performed by two methods, viz. composting under controlled conditions and treatment with ligninolytic fungi. Both methods resulted in degradation of the copolymers, composting being more robust. Out of fungal strains tested Inonotus hispidus degraded aromatic-aliphatic copolyesters most intensively.     

Viscoelastic relaxations and thermal properties of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate)

3-Hydroxybutyrate-3-hydroxyvalerate (3HB-3HV) as well as 3-hydroxybutyrate-4-hydroxybutyrate (3HB-4HB) copolyesters have been investigated by differential scanning calorimetry, thermogravimetric analysis and dynamic mechanical spectroscopy, over a wide range of compositions (0-95 mol% 3HV; 0-82 mol% 4HB). Both series of isolated copolyesters are partially crystalline at all compositions. Quenched samples show a glass transition that decreases linearly with increasing co-monomer molar fraction, more markedly when the co-monomer is 4HB. Above Tg, all copolyesters, rich in 3HB units, show a cold crystallization phenomenon followed by melting, while at the other end crystallization on heating is observed only in 3HB-3HV copolymers. The viscoelastic spectrum, strongly affected by thermal history, shows two relaxation regions: the glass transition, whose location depends on copolymer type and composition, and a secondary dispersion region at low temperatures (-130/-80 degrees C). The latter results from a water-related relaxation analogous to that of P(3HB) and, in 3HB-4HB copolymers, from another overlapping absorption peak centered at -130 degrees C, attributed to local motion of the methylene groups in the linear 4HB units.     

Investigation of the occurrence of xylan-xyloglucan complexes in the cell walls of olive pulp (Olea europaea)

Previously we reported the possible occurrence of a complex containing glucuronoxylan and xyloglucan in the cell walls of olive pulp. In order to investigate the nature of this complex, the 1 M KOH (1 °C)-soluble polysaccharides in which it was prevalent, were separated by graded ethanol precipitation followed by anionexchange chromatography. A slightly acidic fraction was obtained and, by methylation analysis, glycosidic linkages typical of both xylan and xyloglucan were detected. Two distinct populations of the xylan-xyloglucan complexes were resolved by gel-filtration chromatography (2000 and 100 kDa) and the structural features were determined by methylation analysis. Cross-linking of the xylan-xyloglucan moieties was investigated by digestion of the xylan component with a purified, specific, endoxylanase. Although only the xylan element was digested, as verified by methylation analysis, the molecular weight of the xyloglucan moiety was also reduced. This confirmed that the xylan and xyloglucan moieties were strongly attached. The occurrence and structure of the xylan-xyloglucan complexes in the olive pulp cell walls is discussed.     

Sex differences in the chemical composition of uropygial gland waxes in domestic ducks

Sexual differences in the chemical composition of the uropygial gland waxes in domestic ducks have been detected before the nesting period. 3-Hydroxy fatty acids containing diester waxes and significant differences in the composition of the fatty acid and alcohol moieties of the monoester waxes occur during February–June only in the female preen wax. Males as well as ducklings, however, show constant wax patterns. Moreover, no significant influence on wax composition of testosterone or estradiol, respectively in male or female ducklings could be verified.     

Prodrugs of Theophylline Incorporating Ethyleneoxy Groups in the Promoiety: Synthesis, Characterization, and Transdermal Delivery

Two different types of derivatives of theophylline (Th-H) incorporating ethyleneoxy groups into the promoiety have been synthesized. One is a soft alkyl type where N-methyl-N-methoxyethyleneoxycarbonylaminomethyl chlorides have been used to alkylate Th-H in the 7 position. The other is in an acyl type where methoxyethyleneoxycarbonyl chlorides have been used to acylate Th-H in the 7 position. All of the prodrugs were more soluble in the lipid isopropyl myristate (IPM) than Th-H, and three were more soluble in water (AQ) than Th-H. The most water-soluble prodrug gave the highest maximum delivery of total species containing Th-H through hairless mouse skin from IPM (maximum flux, J_MMIPM)—more than seven times that of Th-H, while the other two gave more than three times that of Th-H. The acyl-type prodrugs delivered only Th-H, while the soft alkyl types delivered 60–70% Th-H plus intact prodrug. The Roberts–Sloan equation was able to predict the best performer for each type with an average of the absolute difference between the experimental log J_MMIPM and calculated log J_MMIPM (Δlog J_MMIPM) of 0.253 log units. The values for the present prodrugs and previously reported prodrugs that had not been previously included in the Roberts–Sloan data base (n = 23) were included in the previous n = 71 data base to give n = 94. New coefficients for the Roberts–Sloan equation have been obtained.KEY WORDS: ethyleneoxy groups, lipid solubility, maximum flux, Roberts–Sloan equation, theophylline, water solubility