The effects of alignment error and alignment filtering on the sitewise detection of positive selection

When detecting positive selection in proteins, the prevalence of errors resulting from misalignment and the ability of alignment filters to mitigate such errors are not well understood, but filters are commonly applied to try to avoid false positive results. Focusing on the sitewise detection of positive selection across a wide range of divergence levels and indel rates, we performed simulation experiments to quantify the false positives and false negatives introduced by alignment error and the ability of alignment filters to improve performance. We found that some aligners led to many false positives, whereas others resulted in very few. False negatives were a problem for all aligners, increasing with sequence divergence. Of the aligners tested, PRANK's codon-based alignments consistently performed the best and ClustalW performed the worst. Of the filters tested, GUIDANCE performed the best and Gblocks performed the worst. Although some filters showed good ability to reduce the error rates from ClustalW and MAFFT alignments, none were found to substantially improve the performance of PRANK alignments under most conditions. Our results revealed distinct trends in error rates and power levels for aligners and filters within a biologically plausible parameter space. With the best aligner, a low false positive rate was maintained even with extremely divergent indel-prone sequences. Controls using the true alignment and an optimal filtering method suggested that performance improvements could be gained by improving aligners or filters to reduce the prevalence of false negatives, especially at higher divergence levels and indel rates.     

Multiple sequence alignment with hierarchical clustering.

An algorithm is presented for the multiple alignment of sequences, either proteins or nucleic acids, that is both accurate and easy to use on microcomputers. The approach is based on the conventional dynamic-programming method of pairwise alignment. Initially, a hierarchical clustering of the sequences is performed using the matrix of the pairwise alignment scores. The closest sequences are aligned creating groups of aligned sequences. Then close groups are aligned until all sequences are aligned in one group. The pairwise alignments included in the multiple alignment form a new matrix that is used to produce a hierarchical clustering. If it is different from the first one, iteration of the process can be performed. The method is illustrated by an example: a global alignment of 39 sequences of cytochrome c.     

Incremental window-based protein sequence alignment algorithms

MOTIVATION: Protein sequence alignment plays a critical role in computational biology as it is an integral part in many analysis tasks designed to solve problems in comparative genomics, structure and function prediction, and homology modeling. METHODS: We have developed novel sequence alignment algorithms that compute the alignment between a pair of sequences based on short fixed- or variable-length high-scoring subsequences. Our algorithms build the alignments by repeatedly selecting the highest scoring pairs of subsequences and using them to construct small portions of the final alignment. We utilize PSI-BLAST generated sequence profiles and employ a profile-to-profile scoring scheme derived from PICASSO. RESULTS: We evaluated the performance of the computed alignments on two recently published benchmark datasets and compared them against the alignments computed by existing state-of-the-art dynamic programming-based profile-to-profile local and global sequence alignment algorithms. Our results show that the new algorithms achieve alignments that are comparable with or better than those achieved by existing algorithms. Moreover, our results also showed that these algorithms can be used to provide better information as to which of the aligned positions are more reliable--a critical piece of information for comparative modeling applications.     

Multiple alignment of protein sequences with repeats and rearrangements

Multiple sequence alignments are the usual starting point for analyses of protein structure and evolution. For proteins with repeated, shuffled and missing domains, however, traditional multiple sequence alignment algorithms fail to provide an accurate view of homology between related proteins, because they either assume that the input sequences are globally alignable or require locally alignable regions to appear in the same order in all sequences. In this paper, we present ProDA, a novel system for automated detection and alignment of homologous regions in collections of proteins with arbitrary domain architectures. Given an input set of unaligned sequences, ProDA identifies all homologous regions appearing in one or more sequences, and returns a collection of local multiple alignments for these regions. On a subset of the BAliBASE benchmarking suite containing curated alignments of proteins with complicated domain architectures, ProDA performs well in detecting conserved domain boundaries and clustering domain segments, achieving the highest accuracy to date for this task. We conclude that ProDA is a practical tool for automated alignment of protein sequences with repeats and rearrangements in their domain architecture.     

Matt: local flexibility aids protein multiple structure alignment

Even when there is agreement on what measure a protein multiple structure alignment should be optimizing, finding the optimal alignment is computationally prohibitive. One approach used by many previous methods is aligned fragment pair chaining, where short structural fragments from all the proteins are aligned against each other optimally, and the final alignment chains these together in geometrically consistent ways. Ye and Godzik have recently suggested that adding geometric flexibility may help better model protein structures in a variety of contexts. We introduce the program Matt (Multiple Alignment with Translations and Twists), an aligned fragment pair chaining algorithm that, in intermediate steps, allows local flexibility between fragments: small translations and rotations are temporarily allowed to bring sets of aligned fragments closer, even if they are physically impossible under rigid body transformations. After a dynamic programming assembly guided by these “bent” alignments, geometric consistency is restored in the final step before the alignment is output. Matt is tested against other recent multiple protein structure alignment programs on the popular Homstrad and SABmark benchmark datasets. Matt's global performance is competitive with the other programs on Homstrad, but outperforms the other programs on SABmark, a benchmark of multiple structure alignments of proteins with more distant homology. On both datasets, Matt demonstrates an ability to better align the ends of α-helices and β-strands, an important characteristic of any structure alignment program intended to help construct a structural template library for threading approaches to the inverse protein-folding problem. The related question of whether Matt alignments can be used to distinguish distantly homologous structure pairs from pairs of proteins that are not homologous is also considered. For this purpose, a p-value score based on the length of the common core and average root mean squared deviation (RMSD) of Matt alignments is shown to largely separate decoys from homologous protein structures in the SABmark benchmark dataset. We postulate that Matt's strong performance comes from its ability to model proteins in different conformational states and, perhaps even more important, its ability to model backbone distortions in more distantly related proteins.     

A non-local gap-penalty for profile alignment

The length of an alignment of biological sequences is typically longer than the mean length of its component sequences. (This arises from the insertion of gaps in the alignment.) When such an alignment is used as a profile for the alignment of further sequences (or profiles), it will have a bias toward additional sequences that match the length of the profile, rather than the mean length of sequences in the profile, as the alignment of these well entail fewer (or smaller) insertions) so avoiding gap-penalties). An algorithm is described to correct this bias that entails monitoring the correspondence, for every pair of positions, of the mean separations in both profiles as they are aligned. The correction was incorporated into a standard dynamic programming algorithm through a modification of the gap-penalty, but, unlike other approaches, this modification is not local and takes into consideration the overall alignment of the sequences. This implies that the algorithm cannot guarantee to find the optimal alignment, but tests suggest that close approximations are obtained. The method was tested on protein families by measuring the area in the parameter space of the phase containing the correct multiple alignment. No improvement (increase in phase area) was found with a family that required few gaps to be aligned correctly. However, for highly gapped alignments, a 50% increase in area was obtained with one family and the correct alignment was found for another that could not be aligned with the unbiased method.     

Parametric alignment of Drosophila genomes

The classic algorithms of Needleman-Wunsch and Smith-Waterman find a maximum a posteriori probability alignment for a pair hidden Markov model (PHMM). To process large genomes that have undergone complex genome rearrangements, almost all existing whole genome alignment methods apply fast heuristics to divide genomes into small pieces that are suitable for Needleman-Wunsch alignment. In these alignment methods, it is standard practice to fix the parameters and to produce a single alignment for subsequent analysis by biologists. As the number of alignment programs applied on a whole genome scale continues to increase, so does the disagreement in their results. The alignments produced by different programs vary greatly, especially in non-coding regions of eukaryotic genomes where the biologically correct alignment is hard to find. Parametric alignment is one possible remedy. This methodology resolves the issue of robustness to changes in parameters by finding all optimal alignments for all possible parameters in a PHMM. Our main result is the construction of a whole genome parametric alignment of Drosophila melanogaster and Drosophila pseudoobscura. This alignment draws on existing heuristics for dividing whole genomes into small pieces for alignment, and it relies on advances we have made in computing convex polytopes that allow us to parametrically align non-coding regions using biologically realistic models. We demonstrate the utility of our parametric alignment for biological inference by showing that cis-regulatory elements are more conserved between Drosophila melanogaster and Drosophila pseudoobscura than previously thought. We also show how whole genome parametric alignment can be used to quantitatively assess the dependence of branch length estimates on alignment parameters.     

Structure-dependent sequence alignment for remotely related proteins

MOTIVATION: The quality of a model structure derived from a comparative modeling procedure is dictated by the accuracy of the predicted sequence-template alignment. As the sequence-template pairs are increasingly remote in sequence relationship, the prediction of the sequence-template alignments becomes increasingly problematic with sequence alignment methods. Structural information of the template, used in connection with the sequence relationship of the sequence-template pair, could significantly improve the accuracy of the sequence-template alignment. In this paper, we describe a sequence-template alignment method that integrates sequence and structural information to enhance the accuracy of sequence-template alignments for distantly related protein pairs. RESULTS: The structure-dependent sequence alignment (SDSA) procedure was optimized for coverage and accuracy on a training set of 412 protein pairs; the structures for each of the training pairs are similar (RMSD< approximately 4A) but the sequence relationship is undetectable (average pair-wise sequence identity = 8%). The optimized SDSA procedure was then applied to extend PSI-BLAST local alignments by calculating the global alignments under the constraint of the residue pairs in the local alignments. This composite alignment procedure was assessed with a testing set of 1421 protein pairs, of which the pair-wise structures are similar (RMSD< approximately 4A) but the sequences are marginally related at best in each pair (average pair-wise sequence identity = 13%). The assessment showed that the composite alignment procedure predicted more aligned residues pairs with an average of 27% increase in correctly aligned residues over the standard PSI-BLAST alignments for the protein pairs in the testing set.     

R-Coffee: a method for multiple alignment of non-coding RNA

R-Coffee is a multiple RNA alignment package, derived from T-Coffee, designed to align RNA sequences while exploiting secondary structure information. R-Coffee uses an alignment-scoring scheme that incorporates secondary structure information within the alignment. It works particularly well as an alignment improver and can be combined with any existing sequence alignment method. In this work, we used R-Coffee to compute multiple sequence alignments combining the pairwise output of sequence aligners and structural aligners. We show that R-Coffee can improve the accuracy of all the sequence aligners. We also show that the consistency-based component of T-Coffee can improve the accuracy of several structural aligners. R-Coffee was tested on 388 BRAliBase reference datasets and on 11 longer Cmfinder datasets. Altogether our results suggest that the best protocol for aligning short sequences (less than 200 nt) is the combination of R-Coffee with the RNA pairwise structural aligner Consan. We also show that the simultaneous combination of the four best sequence alignment programs with R-Coffee produces alignments almost as accurate as those obtained with R-Coffee/Consan. Finally, we show that R-Coffee can also be used to align longer datasets beyond the usual scope of structural aligners. R-Coffee is freely available for download, along with documentation, from the T-Coffee web site (www.tcoffee.org).     

Development and validation of a consistency based multiple structure alignment algorithm

SUMMARY: We introduce an algorithm that uses the information gained from simultaneous consideration of an entire group of related proteins to create multiple structure alignments (MSTAs). Consistency-based alignment (CBA) first harnesses the information contained within regions that are consistently aligned among a set of pairwise superpositions in order to realign pairs of proteins through both global and local refinement methods. It then constructs a multiple alignment that is maximally consistent with the improved pairwise alignments. We validate CBA's alignments by assessing their accuracy in regions where at least two of the aligned structures contain the same conserved sequence motif. RESULTS: CBA correctly aligns well over 90% of motif residues in superpositions of proteins belonging to the same family or superfamily, and it outperforms a number of previously reported MSTA algorithms.     

A hidden Markov model for progressive multiple alignment

MOTIVATION: Progressive algorithms are widely used heuristics for the production of alignments among multiple nucleic-acid or protein sequences. Probabilistic approaches providing measures of global and/or local reliability of individual solutions would constitute valuable developments. RESULTS: We present here a new method for multiple sequence alignment that combines an HMM approach, a progressive alignment algorithm, and a probabilistic evolution model describing the character substitution process. Our method works by iterating pairwise alignments according to a guide tree and defining each ancestral sequence from the pairwise alignment of its child nodes, thus, progressively constructing a multiple alignment. Our method allows for the computation of each column minimum posterior probability and we show that this value correlates with the correctness of the result, hence, providing an efficient mean by which unreliably aligned columns can be filtered out from a multiple alignment.     

A strategy for the rapid multiple alignment of protein sequences. Confidence levels from tertiary structure comparisons

An algorithm is presented for the multiple alignment of protein sequences that is both accurate and rapid computationally. The approach is based on the conventional dynamic-programming method of pairwise alignment. Initially, two sequences are aligned, then the third sequence is aligned against the alignment of both sequences one and two. Similarly, the fourth sequence is aligned against one, two and three. This is repeated until all sequences have been aligned. Iteration is then performed to yield a final alignment. The accuracy of sequence alignment is evaluated from alignment of the secondary structures in a family of proteins. For the globins, the multiple alignment was on average 99% accurate compared to 90% for pairwise comparison of sequences. For the alignment of immunoglobulin constant and variable domains, the use of many sequences yielded an alignment of 63% average accuracy compared to 41% average for individual variable/constant alignments. The multiple alignment algorithm yields an assignment of disulphide connectivity in mammalian serotransferrin that is consistent with crystallographic data, whereas pairwise alignments give an alternative assignment.     

Improving the alignment quality of consistency based aligners with an evaluation function using synonymous protein words

Most sequence alignment tools can successfully align protein sequences with higher levels of sequence identity. The accuracy of corresponding structure alignment, however, decreases rapidly when considering distantly related sequences (<20% identity). In this range of identity, alignments optimized so as to maximize sequence similarity are often inaccurate from a structural point of view. Over the last two decades, most multiple protein aligners have been optimized for their capacity to reproduce structure-based alignments while using sequence information. Methods currently available differ essentially in the similarity measurement between aligned residues using substitution matrices, Fourier transform, sophisticated profile-profile functions, or consistency-based approaches, more recently.In this paper, we present a flexible similarity measure for residue pairs to improve the quality of protein sequence alignment. Our approach, called SymAlign, relies on the identification of conserved words found across a sizeable fraction of the considered dataset, and supported by evolutionary analysis. These words are then used to define a position specific substitution matrix that better reflects the biological significance of local similarity. The experiment results show that the SymAlign scoring scheme can be incorporated within T-Coffee to improve sequence alignment accuracy. We also demonstrate that SymAlign is less sensitive to the presence of structurally non-similar proteins. In the analysis of the relationship between sequence identity and structure similarity, SymAlign can better differentiate structurally similar proteins from non- similar proteins. We show that protein sequence alignments can be significantly improved using a similarity estimation based on weighted n-grams. In our analysis of the alignments thus produced, sequence conservation becomes a better indicator of structural similarity. SymAlign also provides alignment visualization that can display sub-optimal alignments on dot-matrices. The visualization makes it easy to identify well-supported alternative alignments that may not have been identified by dynamic programming. SymAlign is available at http://bio-cluster.iis.sinica.edu.tw/SymAlign/.     

DbClustal: rapid and reliable global multiple alignments of protein sequences detected by database searches

DbClustal addresses the important problem of the automatic multiple alignment of the top scoring full-length sequences detected by a database homology search. By combining the advantages of both local and global alignment algorithms into a single system, DbClustal is able to provide accurate global alignments of highly divergent, complex sequence sets. Local alignment information is incorporated into a ClustalW global alignment in the form of a list of anchor points between pairs of sequences. The method is demonstrated using anchors supplied by the Blast post-processing program, Ballast. The rapidity and reliability of DbClustal have been demonstrated using the recently annotated Pyrococcus abyssi proteome where the number of alignments with totally misaligned sequences was reduced from 20% to <2%. A web site has been implemented proposing BlastP database searches with automatic alignment of the top hits by DbClustal.     

Constrained multiple sequence alignment tool development and its application to RNase family alignment

In this paper, we design a heuristic algorithm of computing a constrained multiple sequence alignment (CMSA for short) for guaranteeing that the generated alignment satisfies the user-specified constraints that some particular residues should be aligned together. If the number of residues needed to be aligned together is a constant alpha, then the time-complexity of our CMSA algorithm for aligning K sequences is O(alphaKn(4)), where n is the maximum of the lengths of sequences. In addition, we have built up such a CMSA software system and made several experiments on the RNase sequences, which mainly function in catalyzing the degradation of RNA molecules. The resulting alignments illustrate the practicability of our method.     

Reconstruction of genuine pair-wise sequence alignment.

In many applications, the algorithmically obtained alignment ideally should restore the "golden standard" (GS) alignment, which superimposes positions originating from the same position of the common ancestor of the compared sequences. The average similarity between the algorithmically obtained and GS alignments ("the quality") is an important characteristic of an alignment algorithm. We proposed to determine the quality of an algorithm, using sequences that were artificially generated in accordance with an appropriate evolution model; the approach was applied to the global version of the Smith-Waterman algorithm (SWA). The quality of SWA is between 97% (for a PAM distance of 60) and 70% (for a PAM distance of 300). The percentage of identical aligned residues is the same for algorithmic and GS alignments. The total length of indels in algorithmic alignments is less than in the GS-mainly due to a substantial decrease in the number of indels in algorithmic alignments.     

AlexSys: a knowledge-based expert system for multiple sequence alignment construction and analysis

Multiple sequence alignment (MSA) is a cornerstone of modern molecular biology and represents a unique means of investigating the patterns of conservation and diversity in complex biological systems. Many different algorithms have been developed to construct MSAs, but previous studies have shown that no single aligner consistently outperforms the rest. This has led to the development of a number of ‘meta-methods’ that systematically run several aligners and merge the output into one single solution. Although these methods generally produce more accurate alignments, they are inefficient because all the aligners need to be run first and the choice of the best solution is made a posteriori. Here, we describe the development of a new expert system, AlexSys, for the multiple alignment of protein sequences. AlexSys incorporates an intelligent inference engine to automatically select an appropriate aligner a priori, depending only on the nature of the input sequences. The inference engine was trained on a large set of reference multiple alignments, using a novel machine learning approach. Applying AlexSys to a test set of 178 alignments, we show that the expert system represents a good compromise between alignment quality and running time, making it suitable for high throughput projects. AlexSys is freely available from http://alnitak.u-strasbg.fr/∼aniba/alexsys.     

BAliBASE 3.0: latest developments of the multiple sequence alignment benchmark

Multiple sequence alignment is one of the cornerstones of modern molecular biology. It is used to identify conserved motifs, to determine protein domains, in 2D/3D structure prediction by homology and in evolutionary studies. Recently, high-throughput technologies such as genome sequencing and structural proteomics have lead to an explosion in the amount of sequence and structure information available. In response, several new multiple alignment methods have been developed that improve both the efficiency and the quality of protein alignments. Consequently, the benchmarks used to evaluate and compare these methods must also evolve. We present here the latest release of the most widely used multiple alignment benchmark, BAliBASE, which provides high quality, manually refined, reference alignments based on 3D structural superpositions. Version 3.0 of BAliBASE includes new, more challenging test cases, representing the real problems encountered when aligning large sets of complex sequences. Using a novel, semiautomatic update protocol, the number of protein families in the benchmark has been increased and representative test cases are now available that cover most of the protein fold space. The total number of proteins in BAliBASE has also been significantly increased from 1444 to 6255 sequences. In addition, full-length sequences are now provided for all test cases, which represent difficult cases for both global and local alignment programs. Finally, the BAliBASE Web site (http://www-bio3d-igbmc.u-strasbg.fr/balibase) has been completely redesigned to provide a more user-friendly, interactive interface for the visualization of the BAliBASE reference alignments and the associated annotations.     

Using the T-Coffee package to build multiple sequence alignments of protein, RNA, DNA sequences and 3D structures

T-Coffee (Tree-based consistency objective function for alignment evaluation) is a versatile multiple sequence alignment (MSA) method suitable for aligning most types of biological sequences. The main strength of T-Coffee is its ability to combine third party aligners and to integrate structural (or homology) information when building MSAs. The series of protocols presented here show how the package can be used to multiply align proteins, RNA and DNA sequences. The protein section shows how users can select the most suitable T-Coffee mode for their data set. Detailed protocols include T-Coffee, the default mode, M-Coffee, a meta version able to combine several third party aligners into one, PSI (position-specific iterated)-Coffee, the homology extended mode suitable for remote homologs and Expresso, the structure-based multiple aligner. We then also show how the T-RMSD (tree based on root mean square deviation) option can be used to produce a functionally informative structure-based clustering. RNA alignment procedures are described for using R-Coffee, a mode able to use predicted RNA secondary structures when aligning RNA sequences. DNA alignments are illustrated with Pro-Coffee, a multiple aligner specific of promoter regions. We also present some of the many reformatting utilities bundled with T-Coffee. The package is an open-source freeware available from http://www.tcoffee.org/.     

An Eulerian path approach to global multiple alignment for DNA sequences.

With the rapid increase in the dataset of genome sequences, the multiple sequence alignment problem is increasingly important and frequently involves the alignment of a large number of sequences. Many heuristic algorithms have been proposed to improve the speed of computation and the quality of alignment. We introduce a novel approach that is fundamentally different from all currently available methods. Our motivation comes from the Eulerian method for fragment assembly in DNA sequencing that transforms all DNA fragments into a de Bruijn graph and then reduces sequence assembly to a Eulerian path problem. The paper focuses on global multiple alignment of DNA sequences, where entire sequences are aligned into one configuration. Our main result is an algorithm with almost linear computational speed with respect to the total size (number of letters) of sequences to be aligned. Five hundred simulated sequences (averaging 500 bases per sequence and as low as 70% pairwise identity) have been aligned within three minutes on a personal computer, and the quality of alignment is satisfactory. As a result, accurate and simultaneous alignment of thousands of long sequences within a reasonable amount of time becomes possible. Data from an Arabidopsis sequencing project is used to demonstrate the performance.