The oxidative cleavability of protein cross-linking reagents containing organoselenium bridges

The intensive use of cleavable cross-linking reagents to study macromolecular biological interactions has shown a demand for optimizing these reagents in such a way that the involved macromolecules remain intact. The present work focuses on the development of selenium linkers that are cleavable by mild oxidation. The efficiency of cross-linking and subsequent cross-linker cleavage with a new series of such homo- or heterobifunctional cross-linking reagents have been tested in a simple model system, consisting of albumin and cytochrome c. Resultant, or residual, covalent complex formation is examined by SDS-polyacrylamide gel electrophoresis. From this work it can be concluded that diallyl selenides are readily cleaved by mild oxidation, whereas dialkyl selenides and benzyl alkyl selenides can only be cleaved when the alkyl part of the selenide has an electron-withdrawing group next to the beta-carbon from selenium.     

New photocleavable linker: α-Thioacetophenone-type linker

Photocleavable linkers are advantageous over the common linkers because they could be cleaved without using reagents. A novel photocleavable linker with an α-thioacetophenone moiety has been developed. This linker, which can be cleaved upon irradiation at 365 nm via the Norrish type II reaction, is applicable to a protein affinity purification system, allowing target proteins to be effectively isolated. This novel linker would serve as an effective tool in chemical biology.     

Chemistry on solid supports: defining events and titers by use of cleavable, assayable linking molecules

The cleavable diamines cystamine, 5, and 1,6-diamino-3,4-dihydroxyhexane, 1, were bonded to solid supports and, with a simple, newly developed dinitrofluorobenzene-based assay, were used to define (a) titers of ligands and (b) chemistry distal to the support. Compound 1, which is cleavable with periodate, becomes a linking molecule which is stable to almost all conditions encountered in biochemistry and enjoys considerable hydrophilic character. Compound 5, which is cleavable with dithiothreitol, can be usefully applied to those systems which do not require reducing agents. These nucleophilic linking moieties were converted to cleavable electrophilic linkers by succinylation and p-nitrophenyl ester activation. The first preparation of a polysaccharide-linked support is described. The method also allows the chemical definition of ligands containing amino groups which are prepared by deblocking of protecting groups while on the support. The methodology should promote greater understanding of affinity chromatography materials and processes.     

New reagents for the introduction of reactive functional groups into chemically synthesized DNA probes

An efficient and versatile preparative approach is described, allowing for the preparation of DNA probes modified with an aldehyde group at the 3'- or 5'-end. The developed synthetic strategy allows for the preparation of a new family of phosphoramidites and solid supports compatible with the automated synthesis of modified oligonucleotide probes. These new reagents were prepared from intermediates 3 and 3a, obtained from the commercially available aleuritic acid 1. It was demonstrated that the new phosphoramidite reagents also could be used as new types of cleavable linkers. A new and efficient method for the production of 5' aldehyde-labeled DNA probes was developed.     

Nearest-Neighbor Analysis of Escherichia coli Outer Membrane Proteins, Using Cleavable Cross-Links

A specific dimer of the 37,000-dalton, major outer membrane protein was demonstrated by chemical cross-linking with cleavable reagents.     

Chemical crosslinking and the stabilization of proteins and enzymes.

The technique of chemical crosslinking has been used to enhance the stability of proteins and enzymes. In this procedure, the molecule is braced with chemical crosslinks either intramolecularly or intermolecularly to another species to reinforce its active structure. Various chemicals have been used for this purpose. The bifunctional reagents are the most prominent. These compounds are derived from group-specific reagents and may be classified into homobifunctional, heterobifunctional, and zero-length crosslinkers. Different physical and chemical characteristics have been incorporated into these chemicals. Their versatility holds great potential in preparing chemically, thermally, and mechanically stable proteins and enzymes for industrial applications.     

New methodology for automated SPOT synthesis of peptides on cellulose using 1,3,5‐triazine derivatives as linkers and as coupling reagents

Two new rigid bi‐aromatic linkers for synthesis of peptide arrays by SPOT methodology were obtained from cellulose treated with 2,4‐dichloro‐6‐methoxy‐1,3,5‐triazine. Reaction with m‐phenylenediamine gave non‐cleavable TYPE I linker which enabled attachment of the peptides via resistant to harsh reaction conditions amide, ether, and amine bonds. Reaction with 3‐Fmoc‐aminobenzoic acid followed by thermal isomerization of the intermediate “superactive” ester producing an amide‐like bond gave TYPE II linker that was very stable during peptide synthesis. However, the peptide was cleavable, with fragment of the linker, in the presence of 1 M LiOH solution. The uniform loading of the cellulose and efficient synthesis of the peptide array was achieved by using N‐(4,6‐dimethoxy‐1,3,5‐triazin‐1‐yl)‐N‐methylmorpholinium 4‐toluenesulfonate as the coupling reagent.     

Mitochondrial single nucleotide polymorphism genotyping by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry using cleavable biotinylated dideoxynucleotides

Characterization of mitochondrial DNA (mtDNA) single nucleotide polymorphisms (SNPs) and mutations is crucial for disease diagnosis, which requires accurate and sensitive detection methods and quantification due to mitochondrial heteroplasmy. We report here the characterization of mutations for myoclonic epilepsy with ragged red fibers syndrome using chemically cleavable biotinylated dideoxynucleotides and a mass spectrometry (MS)-based solid phase capture (SPC) single base extension (SBE) assay. The method effectively eliminates unextended primers and primer dimers, and the presence of cleavable linkers between the base and biotin allows efficient desalting and release of the DNA products from solid phase for MS analysis. This approach is capable of high multiplexing, and the use of different length linkers for each of the purines and each of the pyrimidines permits better discrimination of the four bases by MS. Both homoplasmic and heteroplasmic genotypes were accurately determined on different mtDNA samples. The specificity of the method for mtDNA detection was validated by using mitochondrial DNA-negative cells. The sensitivity of the approach permitted detection of less than 5% mtDNA heteroplasmy levels. This indicates that the SPC-SBE approach based on chemically cleavable biotinylated dideoxynucleotides and MS enables rapid, accurate, and sensitive genotyping of mtDNA and has broad applications for genetic analysis.     

A Simple and Effective Cleavable Linker for Chemical Proteomics Applications

The study of metabolically labeled or probe-modified proteins is an important area in chemical proteomics. Isolation and purification of the protein targets is a necessary step before MS identification. The biotin-streptavidin system is widely used in this process, but the harsh denaturing conditions also release natively biotinylated proteins and non-selectively bound proteins. A cleavable linker strategy is a promising approach for solving this problem. Though several cleavable linkers have been developed and tested, an efficient, easily synthesized, and inexpensive cleavable linker is a desirable addition to the proteomics toolbox. Here, we describe the chemical proteomics application of a vicinal diol cleavable linker. Through easy-to-handle chemistry we incorporate this linker into an activity-based probe and a biotin alkyne tag amenable for bioorthogonal ligation. With these reagents, background protein identifications are significantly reduced relative to standard on-bead digestion.The covalent modification of proteins by small molecules within a complex proteome is a major theme in chemical biology and proteomics. An effective method for the detection of posttranslational modifications of proteins is the metabolic incorporation of modified biomolecules such as tagged carbohydrates or lipids (1). Reversible interactions of enzyme inhibitors, natural products, or drugs can be detected when one appends photocrosslinking agents, thereby facilitating target discovery (2, 3). A particularly interesting example of protein labeling is activity-based protein profiling (ABPP)¹ (4, 5), which utilizes the intrinsic catalytic activity of a target enzyme for the covalent attachment of an affinity or visualization tag. ABPP makes use of small molecules (activity-based probes (ABPs)) that react with the active form of a specific enzyme or enzyme class by means of a “warhead,” which is often derived from a mechanism-based enzyme inhibitor (Fig. 1A). DCG-04, for example, is based on the naturally occurring inhibitor E-64 and targets the papain family of cysteine proteases via covalent attachment of the epoxysuccinate group to the active site cysteine (Fig. 1B) (6).Open in a separate windowFig. 1.The cleavable linker strategy in ABPP. A, the elements of an ABP. B, the example ABP DCG-04, an epoxysuccinate-containing probe for clan CA cysteine proteases. DCG-04 is based on the naturally occurring protease inhibitor E-64. C, schematic strategy of cleavable linker-mediated target identification. D, the cleavage mechanism of a vicinal diol.Bulky fluorophore or biotin tags on chemical probes might interfere with efficient protein binding. Moreover, they can negatively influence the cell permeability of probes, which therefore limits their applicability in in vitro experiments. Bioorthogonal chemistries, such as the Bertozzi-Staudinger ligation (7) and the 1,3-bipolar cycloaddition of an azide and an alkyne (click chemistry) (8), allow tandem labeling strategies in which a biotin or a fluorophore is attached to an enzyme probe complex in a separate step. Consequently, the probes themselves only carry azide or alkyne groups as “mini-tags.” Tandem labeling using bioorthogonal chemistry has now become a widely used strategy to label biomolecules in lysates and in live cells (9–11).An essential step in ABPP, as well as in other chemical proteomics approaches, is the elucidation of the tagged proteins. This usually involves a biotin-mediated enrichment step followed by mass-spectrometry-based identification. Although the streptavidin-biotin interaction allows efficient enrichment as a result of the strong binding affinity (K_d ∼ 10⁻¹⁵ m), it also has limitations. The quantitative elution of biotinylated proteins requires harsh conditions (12), which lead to contamination of the sample by endogenous biotinylated and non-specifically bound proteins. These other proteins will be identified together with the real protein targets. Given that subsequent target validation with secondary assays can be a costly and time-consuming process, a reduction in false positive identifications is highly desirable. For cleaner protein identification, cleavable linker strategies (13) that allow the selective release of target proteins have been developed (Fig. 1C). The commercially available disulfide linker can be cleaved under mild conditions, but it suffers from premature cleavage in reducing media such as the intracellular environment and reducing buffers used for click chemistry and in vitro reactions of cysteine proteases. Therefore, a variety of alternative linkers for proteomics applications have been reported, including a sterically hindered disulfide (14), diazobenzenes (15–19), hydrazones (20, 21), silanes (22), light sensitive linkers (23–25), tobacco etch virus protease sensitive linkers (26, 27), and a levulinoyl-based linker (28). The synthesis of some of these linkers is lengthy or difficult to scale up, which limits their general application in chemical proteomics.Ideally, a cleavable linker is stable under a wide variety of conditions, is efficiently and selectively cleaved, and can be synthesized in a low number of easy chemical transformations. We aimed to meet these requirements by using a vicinal diol as a cleavable linker system. When vicinal diols are treated with sodium periodate (NaIO₄), the carbon–carbon bond is cleaved (Fig. 1D). Periodate treatment of proteins can result in side-reactions, such as the cleavage of linked carbohydrates or the oxidation of N-terminal serine and threonine residues. However, these N-termini rarely occur in proteins and are therefore of minor concern. In general, the mild, neutral conditions of periodate cleavage are compatible with proteins. This has been illustrated in the past, for example, by its application in the detection of protein–protein interactions (29) and the creation of unliganded MHC class I molecules (30). In this article, we report the chemical proteomics application of diol cleavable linker probes. We show that the synthesis of the linker and its probe derivatives is straightforward, that the linker is compatible with tandem click labeling, that enrichment and release of probe targets is efficient, and that the identification of targets takes place with significantly lower background than in on-bead digestion protocols.     

Reagents for the preparation of two oligonucleotides per synthesis (TOPS).

In order to increase the efficiency of use of automated DNA synthesizers (i.e. the number of oligomers prepared per day), we have devised and prepared novel phosphoramidite reagents that contain a linking group which, while stable under the normal synthesis conditions, is cleaved under basic conditions. When one of these linkers is introduced at the desired position in the synthesis of an oligonucleotide, subsequent detritylation enables the synthesis of a second oligonucleotides sequence upon the first. During deprotection of the oligonucleotide with ammonium hydroxide, the chain is cleaved at either side of the points of introduction of the novel reagent, generating two oligonucleotides free in solution. These reagents are of particular use in applications where oligomers are used in pairs (such as PCR, chemical synthesis of genes etc.) and means that an automated synthesis facility can be used more efficiently, without the need for operator intervention, after the working day is over.     

Cross-linking analysis of Neisseria gonorrhoeae outer membrane proteins.

The arrangement of proteins in the outer membrane of Neisseria gonorrhoeae was investigated through the use of cleavable chemical cross-linking reagents and two-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Cross-linking of isolated outer membranes yielded dimers and trimers of the major outer membrane protein. In addition, data were obtained suggesting that a stable interaction exists between the major protein I and protein II, the second most prevalent protein in the gonococcal outer membrane.     

Identification of a potent and selective oxytocin antagonist, from screening a fully encoded differential release combinatorial chemical library

A library of 1,296 1,4-benzodiazepines was prepared on 160 microM Tentagel beads. Compounds are attached to the beads using orthogonally cleavable linkers. The library was first screened as pools of 30 beads where 50% of the material is released and screened. GW405212X, a selective oxytocin antagonist, was identified by picking single beads from active pools.     

Novel PIKK inhibitor antibody-drug conjugates: Synthesis and anti-tumor activity

Novel neolymphostin-based antibody-drug conjugate (ADC) precursors were synthesized either through amide couplings between both cleavable and non-cleavable linkers and neolymphostin derivatives, or through Cu(I)-catalyzed acetylene-azide click cycloadditon between non-cleavable linkers and neolymphostin acetal derivatives. These precursors were site-specifically conjugated to cysteine mutant trastuzumab-A114C to provide neolymphostin-based ADCs. Preliminary in vitro data indicated that the corresponding ADCs were active against HER2-expressing tumor cell lines, thus providing a proof-of-concept for using neolymphostin as ADC-based anticancer agents.     

Synthesis of a cleavable protein-crosslinking reagent for the investigation of ribosome structure.

This communication describes a simple method for synthesizing cleavable bifunctional imido esters of different chain lengths. These reagents, which form covalent crosslinks between lysine residues of proteins, contain a disulfide bond which is cleaved under mild conditions by reducing agents such as 2-mercaptoethanol. The reagents are synthesized via the dithiobisnitrile which is prepared in high yield by reacting the appropriate omega-activated nitrile with sodium polysulfide and is then converted quantitatively to the diimidate. Three such reagents were prepared: dimethyl 3.3'-dithiobispropionimidate, dimethyl 4,4'-dithiobisbutyrimidate, and dimethyl 6-6'-dithiobiscaproimidate. The first was synthesized from acrylonitrile, and the others from the appropriate omega-bromonitriles. Experiments with the bispropionimidate and a test protein, pancreatic ribonuclease, have shown the reagent to be effective in producing multimeric crosslinked complexes, from which monomeric proteins can recovered after treatment with 2-mercaptoethanol. The reagents are suitable for studies of ribosomal structure.     

Clickable gold nanoparticles for streamlining capture,enrichment and release of alkyne-labelled proteins

Alkyne-labelled proteins are generated as key intermediates in the chemical probe-based approaches to proteomics analysis. Their efficient and selective detection and isolation is an important problem. We designed and synthesized azide-functionalized gold nanoparticles as new clickable capture reagents to streamline click chemistry-mediated capture, enrichment and release of the alkyne-labelled proteins in one-pot to expedite the post-labelling analysis. Because hydrophobic surface functionalities are known to render gold nanoparticles poorly water-dispersible, hydrophilic PEG linkers with two different lengths were explored to confer colloidal stability to the clickable capture reagents. We demonstrated the ability of the capture reagents to conjugate the alkyne containing proteins at a nanomolar concentration via click chemistry, which can be immediately followed by their enrichment and elution. Furthermore, a bifunctional clickable capture reagent bearing sulforhodamine and azide groups was shown to conveniently attach a fluorophore to the alkyne-labelled protein upon click capture, which facilitated their rapid detection in the gel analysis.     

Proteomics evaluation of chemically cleavable activity-based probes

Activity-based probes (ABPs) that specifically target subsets of related enzymatic proteins are finding increasing use in proteomics research. One of the main applications for these reagents is affinity isolation of probe-labeled targets. However, the use of cheap and efficient biotin affinity tags on ABPs can be problematic due to difficulty in release of captured proteins. Here we describe the evaluation of activity-based probes carrying a chemically cleavable linker that allows selective release of probe-labeled proteins under mild elution conditions that are compatible with mass spectrometric analysis. Specifically, we compare results from standard on-bead digestion of probe-labeled targets after affinity purification with the results obtained using chemoselective cleavage. Results are presented for multiple APBs that target both serine and cysteine proteases. These results highlight significant improvements in the quality of data obtained by using the cleavable linker system.     

Solid-Phase Cross-Linking (SPCL): a new tool for protein structure studies

A wide range of chemical reagents are available to study the protein-protein interactions or protein structures. After reaction with such chemicals, covalently modified proteins are digested, resulting in shorter peptides that are analyzed by mass spectrometry (MS). Used especially when NMR of X-ray data are lacking, this methodology requires the identification of modified species carrying relevant information, among the unmodified peptides. To overcome the drawbacks of existing methods, we propose a more direct strategy relying on the synthesis of solid-supported cleavable monofunctional reagents and cross-linkers that react with proteins and that selectively release, after protein digestion and washings, the modified peptide fragments ready for MS analysis. Using this Solid-Phase Cross-Linking (SPCL) strategy, only modified sequences are analyzed and consistent data can be easily obtained since the signals of interest are not masked or suppressed by over-represented unmodified materials.     

Centrifugation aided highly sensitive detection of nitrite with a dye–silica conjugate featuring cleavable linkages

Rhodamine–silica nanocomposite bridged by a cleavable linker was used for highly sensitive nitrite detection via analyte triggered release of rhodamine from silica particles. Centrifugal removal of pristine nanoconjugate from the assay medium effectively decreased background signals in the supernatant whereas rhodamine unleashed from silica platform is retained in the supernatant, enabling facile detection of nitrite with an assay limit of 50 nM which is 400 folds lower than legislated maximum contaminant levels of nitrite in drinking water. Assays based on small molecular chemosensors are often compromised by their intrinsic fluorescence signals and low aqueous compatibility. The performance of water compatible rhodamine–silica nanocomposite suggests broad analytical potentials of centrifugal nanoparticulate systems with dyes conjugated via appropriate cleavable linkers.     

Protein interactions in the outer membrane of Escherichia coli.

Specific protein interactions in Escherichia coli outer membrane were analyzed using chemical cross-linking with truly cleavable reagents and symmetrical two-dimensional sodium dodecyl sulphate/polyacrylamide gel electrophoresis. The major outer membrane proteins were shown to form cross-linked complexes. These include multimers of lambda receptor, protein I, II, III and the free form of lipoprotein. Lipoprotein was also found to be cross-linked to proteins II and III. The identity of many of these complexes was verified using appropriate mutants missing the proteins in question. No new protein interactions were detected in the mutants even when three of the major proteins were missing. Proteins II, III and the free form of lipoprotein could also be cross-linked to the peptidoglycan layer of the cell wall.     

Chemical cross-links of proteins by using bifunctional reagents

• 1.1. The chemical identification of spatial arrangements of the subunits in oligomeric proteins is exclusively achieved by the analysis of the reaction products of the protein and bifunctional reagents.
• 2.2. Since the pioneer work of Hartman and Wold (Biochemistry6, 2439–2448, 1967) the bifunctional reagent such as bis-imido-esters was first introduced into protein chemistry.
• 3.3. We have listed the non-cleavable and cleavable bis-imido-esters, the N-hydroxy-succinimido-csters and the aryl azides which once photolyzed, become the highly reactive nitrene intermediates.
• 4.4. Different reagents classified as homo- and hetero-bifunctional reagents are also listed.
• 5.5. The advantages and limits of each group as well as their chemical properties are advanced and extensively discussed.