Instability of Langmuir-Blodgett layers of barium stearate, cadmium arachidate and tripalmitin, studied by means of electron microscopy and infrared spectroscopy.

Results of an investigation of the stability of n-layers of barium stearate, cadmium arachidate and tripalmitin by means of electron microscopy and attenuated total reflection infrared spectroscopy are reported. Odd and even numbered barium starate n-layers with n - 1,2,3,4,5 are found to rearrange spontaneously from a regular film into ultrastructures of irregular, flat islands of varying thickness. The kinetics of the phase transformation of the first layer depends on the substrate, that of n-layers appears to be dependent on n, the temperature, and the surrounding medium. The kinetic behaviour of odd and even numbered layers is distinctly different. Similar studies on cadmium arachidate layers reveal much slower kinetics of the rearrangement process. In the case of tripalmitin n-layers it is shown that electron microscopy and infrared spectroscopy yield valuable complementary information about ultrastructure and molecular structure of the layers in correlation with the rearrangement process, which also occurs with this system. Consequences of the results of this paper for work published in various fields are briefly discussed.     

Plant seed extract assisted,eco-synthesized C-ZnO nanoparticles: Characterization,chromium(VI) ion adsorption and kinetic studies

This report attempts to elucidate the potential of plant seed extract assisted synthesis of graphite-based zinc oxide nanoparticles (C-ZnO NPs) towards removal of chromium(VI) ions from water samples. The graphite-based zinc oxide (C-ZnO) composites were characterized using thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The C-ZnO nanocomposites have found to remove chromium from the sample through an adsorption process. The sensitivity of chromium removal through adsorption is found to be in the range of 40 to 240 mg. The adsorption behaviour was found to be fitting with Langmuir isotherm model and the adsorption reaction follows pseudo second-order kinetics.     

Crystal structure and thermal characterization of cadmium oxalate [CdC2O4 · 3H2O] and barium-doped cadmium oxalate [Ba0.5Cd0.5(C2O4)2 · 5H2O] single crystals grown in silica gel

Pure cadmium oxalate trihydrate (COT) and barium added cadmium oxalate (BCO) single crystals were grown by controlled diffusion of Cd²⁺ and Ba²⁺ ions in silica gel at ambient temperature. A single test tube technique coupled with gel aging conferred maximum size crystals by controlling the nucleation rate. It was found that the pH and age of the gel greatly influenced the crystal quality, their size and transparency. Grown crystals CdC₂O₄ · 3H₂O and Ba_0.5Cd_0.5(C₂O₄)₂ · 5H₂O were characterized by X-ray diffraction, Fourier transform infrared spectroscopy and thermal analysis. Effect of barium dopant on the growth and morphology of cadmium oxalate was studied. Pure cadmium oxalate crystallized in triclinic system and the barium-doped cadmium oxalate crystallized in hexagonal system with massive changes in their unit cell parameters. The infrared spectrum revealed the presence of oxalate ligands and water of hydration in both the pure and barium-doped crystals. Thermal analysis showed that the grown crystals were dehydrated thermally even from lower temperatures and the doped crystals were found more stable.     

Kinetics of fibril formation of bovine kappa-casein indicate a conformational rearrangement as a critical step in the process

S-carboxymethylated (SCM) κ-casein forms in vitro fibrils that display several characteristics of amyloid fibrils, although the protein is unrelated to amyloid diseases. In order to get insight into the processes that prevent the formation of amyloid fibrils made of κ-caseins in milk, we have characterized in detail the reaction and the roles of its possible effectors: glycosylation and other caseins. Given that native κ-casein occurs as a heterogeneous mixture of carbohydrate-free and carbohydrate-containing chains, kinetics of fibril formation were performed on purified glycosylated and unglycosylated SCM κ-caseins using the fluorescent dye thioflavin T in conjunction with transmission electron microscopy and Fourier transform infrared spectroscopy for morphological and structural analyses. Both unglycosylated and glycosylated SCM κ-caseins have the ability to fibrillate. Kinetic data indicate that the fibril formation rate increases with SCM κ-casein concentration but reaches a plateau at high concentrations, for both the unglycosylated and glycosylated forms. Therefore, a conformational rearrangement is the rate-limiting step in fibril growth of SCM κ-casein. Transmission electron microscopy images indicate the presence of 10- to 12-nm spherical particles prior to the appearance of amyloid structure. Fourier transform infrared spectroscopy spectra reveal a conformational change within these micellar aggregates during the fibrillation. Fibrils are helical ribbons with a pitch of about 120-130 nm and a width of 10-12 nm. Taken together, these findings suggest a model of aggregation during which the SCM κ-casein monomer is in rapid equilibrium with a micellar aggregate that subsequently undergoes a conformational rearrangement into a more organized species. These micelles assemble and this leads to the growing of amyloid fibrils. Addition of α_s1-and β-caseins decreases the growth rate of fibrils. Their main effect was on the elongation rate, which became close to that of the limiting conformation change, leading to the appearance of a lag phase at the beginning of the kinetics.     

Synthesis, thermal stability and photoluminescence of new cadmium sulfide/organic composite hollow sphere nanostructures

Novel cadmium sulfide/organic composite hollow spheres composed of sword-like nanorods were synthesized via a simple reaction between cadmium salts and thioglycolic acid (TGA) at room temperature. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SEAD) and Fourier transform infrared (FT-IR) spectra. Thermal stability of the organic composite was investigated. CdS/organic composite would decompose into pure wurtzite CdS through hydrothermal treatment. Effect of the cadmium source on the formation of the CdS/organic composite was investigated. Photoluminescence (PL) was used to study the optical properties of CdS/organic composite and pure CdS.     

耐镉促生缺陷短波单胞菌Y01Z的分离与表征

【目的】本研究旨在从湖北地区镉污染严重的水稻根际土壤中,分离并鉴定能耐受高浓度的镉离子,同时具有镉去除能力和促进植物生长的细菌。【方法】采用稀释涂布平板和镉浓度梯度驯化的方法,成功分离出一株最高可耐受700 mg/L CdCl2且稳定生长的菌株,命名为Y01Z,并结合形态学、生理生化和分子生物学等方法对其进行鉴定。【结果】结果显示该菌株属于缺陷短波单胞菌(Brevundimonas diminuta),其最适生长条件为pH值7.0、温度30°C、NaCl浓度0.5%。扫描电镜和透射电镜分析显示,Y01Z通过拉长细胞尺寸以确保在高浓度镉处理下的生存和繁殖,同时能吸附镉离子,并将其输送到细胞内沉积。傅里叶变换红外光谱分析显示,Cd2+与细菌表面羧基、羟基、羰基和酰胺等官能团结合。经过104 h的培养,Y01Z菌株能够去除高达75%的总添加镉,从300 mg/L降至74.73 mg/L。此外,该菌株还具有促进植物生长的功能,如溶解磷,产生铵态氮和吲哚乙酸,并含有嗜铁载体等物质。【结论】本研究探讨了缺陷短波单胞菌Y01Z在耐镉、植物促生方面的性质,以及在修复镉污染土壤方面的应用前景。本研究为深...     

Non-intercalative,Deoxyribose Binding of Boric Acid to Calf Thymus DNA

The present study characterizes the effects of the boric acid binding on calf thymus DNA (ct-DNA) by spectroscopic and calorimetric methods. UV–Vis absorbance spectroscopy, circular dichroism (CD) spectroscopy, transmission electron microscopy (TEM), isothermal titration calorimetry (ITC), and Fourier transform infrared (FT-IR) spectroscopy were employed to characterize binding properties. Changes in the secondary structure of ct-DNA were determined by CD spectroscopy. Sizes and morphologies of boric acid–DNA complexes were determined by transmission electron microscopy (TEM). The kinetics of boric acid binding to calf thymus DNA (ct-DNA) was investigated by isothermal titration calorimetry (ITC). ITC results revealed that boric acid exhibits a moderate affinity to ct-DNA with a binding constant (K _a) of 9.54?×?10⁴ M^?1. FT-IR results revealed that boric acid binds to the deoxyribose sugar of DNA without disrupting the B-conformation at tested concentrations.     

Biosurfactant of marine origin exhibiting heavy metal remediation properties

The present study was aimed at elucidating the role of biosurfactant product isolated from a marine bacterium in removing heavy metals from heavy metal containing solutions. In this study, metal removal was biosurfactant-mediated. Efficiency of metal removal depended on the concentration of the metal as well as that of the biosurfactant. At a concentration 5×, the critical micelle concentration (CMC), almost complete removal of 100 ppm of lead and cadmium occurred. Atomic absorption spectroscopy (AAS) studies also showed metal removal at a concentration less than the CMC in contrast to earlier findings that only micelles are involved in metal removal. Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM) equipped with energy dispersive X-ray spectroscopy (EDS) further substantiated these findings.     

A comparative study of clinically well-characterized human atherosclerotic plaques with histological, chemical, and ultrastructural methods

Atherosclerotic plaques (six cases) with well-documented clinical history were analysed using histology, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX) spectroscopy, infrared spectroscopy (IR), thermogravimetry (TG), and high-resolution synchrotron X-ray diffraction. All samples contained about 60-70 wt% biological carbonated apatite (in dry state) in a nanocrystalline form with particle sizes of about 20 nm. Structurally, there are strong similarities to bone mineral. Ultrastructural investigations documented typical calcospherites, mineralisation processes starting at collagen fibrils and ring-shaped crystalline mineralised structures. There were no significant ultrastructural or chemical differences between the calcifications of individual patients.     

Evaluation of Poly(2-Ethyl-2-Oxazoline) Containing Copolymer Networks of Varied Composition as Sustained Metoprolol Tartrate Delivery Systems

Segmented copolymer networks (SCN) based on poly(2-ethyl-2-oxazoline) and containing 2-hydroxyethyl methacrylate, 2-hydroxypropyl acrylate, and/or methyl methacrylate segments have been evaluated as potential sustained release systems of the water soluble cardioselective β-blocker metoprolol tartrate. The structure and properties of the drug carriers were investigated by differential scanning calorimetry, attenuated total reflectance Fourier transform infrared spectroscopy, scanning electron microscopy, and atomic force microscopy. Swelling kinetics of SCNs in various media was followed, and the conditions for effective MT loading were specified. MT-loaded SCNs with drug content up to 80 wt.% were produced. The release kinetics of metoprolol tartrate from the systems was studied and it was shown that the conetworks of different structure and composition are able to sustain the metoprolol tartrate release without additional excipients.     

Multistep Aggregation Pathway of Human Interleukin-1 Receptor Antagonist: Kinetic, Structural, and Morphological Characterization

The complex, multistep aggregation kinetic and structural behavior of human recombinant interleukin-1 receptor antagonist (IL-1ra) was revealed and characterized by spectral probes and techniques. At a certain range of protein concentration (12-27 mg/mL) and temperature (44-48°C), two sequential aggregation kinetic transitions emerge, where the second transition is preceded by a lag phase and is associated with the main portion of the aggregated protein. Each kinetic transition is linked to a different type of aggregate population, referred to as type I and type II. The aggregate populations, isolated at a series of time points and analyzed by Fourier-transform infrared spectroscopy, show consecutive protein structural changes, from intramolecular (type I) to intermolecular (type II) β-sheet formation. The early type I protein spectral change resembles that seen for IL-1ra in the crystalline state. Moreover, Fourier-transform infrared data demonstrate that type I protein assembly alone can undergo a structural rearrangement and, consequently, convert to the type II aggregate. The aggregated protein structural changes are accompanied by the aggregate morphological changes, leading to a well-defined population of interacting spheres, as detected by scanning electron microscopy. A nucleation-driven IL-1ra aggregation pathway is proposed, and assumes two major activation energy barriers, where the second barrier is associated with the type I → type II aggregate structural rearrangement that, in turn, serves as a pseudonucleus triggering the second kinetic event.     

Synthesized β-cyclodextrin modified graphene oxide (β-CD-GO) composite for adsorption of cadmium and their toxicity profile in cervical cancer (HeLa) cell lines

In the current study, a composite material was constructed using β-cyclodextrin/graphene oxide (β-CD-GO) and was then applied for the purpose of eliminating cadmium (Cd) from aqueous solution. The synthesized β-CD-GO composite material was then subjected to characterization using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The batch study was conducted for the purpose of removing Cd(II). The results of the study revealed that the β-CD-GO composite material demonstrated a high adsorption capacity of 196 mg/g of Cd(II) at pH 7.0. Further, the adsorption of Cd(II) on the β-CD-GO followed pseudo second-order kinetics and equilibrium adsorption data, which fitted well to the Langmuir isotherm model. The evaluation of the toxicity of the synthesized β-CD-GO composite material was done by the examination of the cervical cancer (HeLa) cell lines. Increasing concentration of β-CD-GO composite material (50 μg to 200 μg) leads to a decline in the percentage of cell viability as from 74 % to 25 %. This study has suggested that the β-CD-GO could play an efficient and beneficial source of the adsorbent for the purpose of eliminating Cd(II) from aqueous solution.     

A Method for the Examination of the Same Cell Using Light, Scanning and Transmission Electron Microscopy

A method is described for preparing the same cell from a cytospin preparation for comparative investigation by light microscopy, scanning electron microscopy and transmission electron microscopy. A permanent numbered grid pattern was etched on a glass microscope slide to facilitate cell location in each microscopic mode. Data from one cell or group of cells was thus obtained from three sources. This method provides a useful adjunct to routine cytological diagnosis.     

Synthesis and characterization of cadmium selenide quantum dots doped by europium and investigation of their chemiluminescence properties and antibacterial activities

Nanoparticles of cadmium selenide (CdSe) doped with europium, were synthesized as stabilizing agents using thioglycolic acid ligand. This method is based on the enhancing effect of CdSe quantum dots (QDs) doped with europium on chemiluminescence (CL) emission. This emission was generated by mixing CdSe QDs with manganese (II), iron (II) and chrome (II) sulfates as catalysts in the presence of hydrogen peroxide (H₂O₂). The structural characteristics and morphology of these nanoparticles were investigated by scanning electron microscopy, Fourier transform infrared spectroscopy, ultraviolet–visible absorption spectroscopy, X‐ray pattern and dynamic light scattering methods. The CdSe QDs doped with europium were used as the sensitizer in a luminol?hydrogen peroxide CL system. The sensitized CdSe QDs were analyzed for antibacterial activity against Gram‐positive or Gram‐negative bacteria. The results showed that the CdSe QDs are effective against all the studied bacteria, effectiveness was especially higher for Bacillus subtilis.     

Investigating antibacterial effects of garlic (Allium sativum) concentrate and garlic-derived organosulfur compounds on Campylobacter jejuni by using Fourier transform infrared spectroscopy, Raman spectroscopy, and electron microscopy

Fourier transform infrared (FT-IR) spectroscopy and Raman spectroscopy were used to study the cell injury and inactivation of Campylobacter jejuni from exposure to antioxidants from garlic. C. jejuni was treated with various concentrations of garlic concentrate and garlic-derived organosulfur compounds in growth media and saline at 4, 22, and 35°C. The antimicrobial activities of the diallyl sulfides increased with the number of sulfur atoms (diallyl sulfide < diallyl disulfide < diallyl trisulfide). FT-IR spectroscopy confirmed that organosulfur compounds are responsible for the substantial antimicrobial activity of garlic, much greater than those of garlic phenolic compounds, as indicated by changes in the spectral features of proteins, lipids, and polysaccharides in the bacterial cell membranes. Confocal Raman microscopy (532-nm-gold-particle substrate) and Raman mapping of a single bacterium confirmed the intracellular uptake of sulfur and phenolic components. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were employed to verify cell damage. Principal-component analysis (PCA), discriminant function analysis (DFA), and soft independent modeling of class analogs (SIMCA) were performed, and results were cross validated to differentiate bacteria based upon the degree of cell injury. Partial least-squares regression (PLSR) was employed to quantify and predict actual numbers of healthy and injured bacterial cells remaining following treatment. PLSR-based loading plots were investigated to further verify the changes in the cell membrane of C. jejuni treated with organosulfur compounds. We demonstrated that bacterial injury and inactivation could be accurately investigated by complementary infrared and Raman spectroscopies using a chemical-based, "whole-organism fingerprint" with the aid of chemometrics and electron microscopy.     

Preparation and characterization of electrospun pullulan/montmorillonite nanofiber mats in aqueous solution

Pullulan (PULL)/montmorillonite clay (MMT) nanofiber blend mats with various weight ratios have been fabricated by the electrospinning technique in aqueous solution. The PULL/MMT nanofiber mats are characterized by X-ray diffraction (XRD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) and mechanical measurements. The study shows that the introduction of MMT results in improvement in tensile strength, and thermal stability of the PULL matrix. XRD patterns and TEM micrographs suggest the coexistence of intercalated MMT layers over the studied MMT contents. XRD analyses also reveal an increase of the crystallinity of the blend nanofiber mats with addition of MMT fillers. Moreover, FT-IR divulges that there might be possible interaction occurred between the MMT clay and PULL matrix.     

Development of sustainable dye adsorption system using nutraceutical industrial fennel seed spent—studies using Congo red dye

Fennel seed spent (FSS)—an inexpensive nutraceutical industrial spent has been used as an efficient biosorbent for the removal of Congo red (CR) from aqueous media. Results show that the conditions for maximum adsorption would be pH 2-4 and 30°C were ideal for maximum adsorption. Based on regression fitting of the data, it was determined that the Sips isotherm (R² = 0.994, χ² = 0.5) adequately described the mechanism of adsorption, suggesting that the adsorption occurs homogeneously with favorable interaction between layers with favorable interaction between layers. Thermodynamic analysis showed that the adsorption is favorable (negative values for ΔG°) and endothermic (ΔH° = 12–20 kJ mol^?1) for initial dye concentrations of 25, 50, and 100 ppm. The low ΔH° value indicates that the adsorption is a physical process involving weak chemical interactions like hydrogen bonds and van der Waals interactions. The kinetics revealed that the adsorption process showed pseudo-second-order tendencies with the equal influence of intraparticle as well as film diffusion. The scanning electron microscopy images of FSS show a highly fibrous matrix with a hierarchical porous structure. The Fourier transform infrared spectroscopy analysis of the spent confirmed the presence of cellulosic and lignocellulosic matter, giving it both hydrophilic and hydrophobic properties. The investigations indicate that FSS is a cost-effective and efficient biosorbent for the remediation of toxic CR dye.     

Fibrillation of human serum albumin shows nonspecific coordination on stoichiometric increment of Copper(II)

Protein aggregation is related to a series of pathological disorders the main cause of which are the fibrillar species generated during the process. Human serum albumin (HSA) undergoes rapid fibrillation in the presence of Cu(II) at pH 7.4 in 60% ethanol after 6-h incubation (～65?°C) followed by room temperature incubation. Here, we have investigated the effect of a stoichiometric variation of Cu(II) on the self-assembly of HSA using Congo red and thioflavin T dye-binding studies, circular dichroism spectroscopy, Fourier transform infrared spectroscopy, electron paramagnetic resonance spectroscopy, fluorescence microscopy and transmission electron microscopy. The simulation of EPR spectra suggests that with the increment in Cu(II) ion concentration, there is a change in ligand field coordination. Kinetic parameters indicate reduced cooperativity that may be related to the nonspecific coordination on increment of Cu(II) concentration. Cu(II) is also able to direct the accumulation of a large number of fibers along with a formation of dense fibrillar network which is evident from microscopic images.     

Energy-dispersive X-ray analysis of the extracellular cadmium sulfide crystallites of Klebsiella aerogenes

Klebsiella aerogenes forms electron-dense partieles on the cell surface in response to the presence of cadmium ions in the growth medium. These particles ranged from 20 to 200 nm in size, and quantitative energy dispersive X-ray analysis established that they comprise cadmium and sulfur in a 1:1 ratio. This observation leads to the conclusion that the particles are cadmium sulfide crystallites. A combination of atomic absorption spectroscopy, inductively coupled plasma mass spectrometry, and acid-labile sulfide analysis revealed that the total intracellular and bound extracellular cadmium:sulfur ratio is also 1:1, which suggests that the bulk of the cadmium is fixed as extracellular cadmium sulfide. The tolerance of K. acrogenes to cadmium ions and the formation of the cadmium sulfide crystallites were dependent on the buffer composition of the growth medium. The addition of cadmium ions to phosphate-buffered media resulted in cadmium phosphate precipitates that remove the potentially toxic cadmium ions from the growth medium. Electrondense particles formed on the surfaces of bacteria grown under these conditions were a combination of cadmium sulfide and cadmium phosphates. The specific bacterial growth rate in the exponential phase of batch cultures was not affected by up to 2mM cadmium in Tricine-buffered medium, but formation of cadmium sulfide crystallites was maximal during the stationary phase of batch culture. Cadmium tolerance was much lower (10 to 150 M) in growth media buffered with Tris, Bistris propane, Bes, Tes, or Hepes. These results illustrate the importance of considering medium composition when comparing levels of bacterial cadmium tolerance.Abbreviations EDXA Energy dispersive X-ray analysis - AAS Atomic absorption spectroscopy - TEM Transmission electron microscopy - SEM Scanning electron microscopy - ICP-MS Inductively coupled plasma mass spectrometry - ALSA Acid-labile sulfide analysis