Production and separation of alpha-agarase from Altermonas agarlyticus strain GJ1B

This paper presents results on the production of alpha-agarase by a fermentation process and its separation using membrane microfiltration (MF). Optimization of fermentation conditions for alpha-agarase production using Altermonas agarlyticus grown on medium containing agar as a carbon source was done in batch, fed-batch and continuous fermentations. Continuous culture at a dilution rate of 0.03 h(-1) appeared to be best suited for production of alpha-agarase by this organism. At 0.03 h(-1) dilution rate, enzyme activity was 0.9 U/ml. Clarification of broth was done using a hollow-fibre microfiltration membrane. The influence of hydrodynamic parameters on permeate flux and enzyme activity was studied. The best performance was obtained with prefiltered fermentation broth. A stable permeate flux of about 250-270 ml/min.m2 and an enzyme retention rate between 0% and 25% was obtained at temperatures between 6 degrees C and 22 degrees C, transmembrane pressure of 100 mm Hg and fluid cross-flow velocity of 4 x 10(-2) m/s. From the experiments on concentration of fermentation broth, the best compromise between enzyme activity transmission and permeate flux was obtained at a concentration factor of 2.     

Studies on the interaction of fermentation and microfiltration operations: erythromycin recovery from Saccharopolyspora erythraea fermentation broths

Changes in fermentation media not only affect the performance of the fermentation itself (with regard to the kinetics of biomass and product formation and the yields obtained) but also the initial product-recovery operations downstream of the fermentor. In this work, microfiltration experiments to remove Saccharopolyspora erythraea biomass from fermentation broth and to recover erythromycin were carried out using two fundamentally different media; a soluble complex medium (SCM) and an oil-based process medium (OBM). Small-scale batch fermentations of 14-L working volume were carried out in triplicate using both media. Broth samples were taken from each fermentation at regular intervals from the end of the exponential-growth phase onwards. These were then processed using a Minitan II (acrylic), tangential crossflow-filtration module, fitted with a single 60 cm(2) Durapore hydrophilic 0.2 microm membrane, operated in concentration mode. The OBM fermentations produced higher titers of erythromycin but required longer fermentation times due to increased lag phases and slower maximum-growth rates. The OBM also increased the loading on the membrane; at maximum product titers residual oil concentrations of 3 g. L(-1), antifoam concentrations of 2 g. L(-1) and flour concentrations estimated at approximately 10 g/L(-1) were typical. It was found that both the permeate flux and erythromycin transmission were affected by the choice of medium. The OBM had significantly lower values for both parameters (12.8 Lm(-2) h(-1) and 89.6% respectively) than the SCM (35.9 Lm(-2) h(-1) and 96.7% respectively) when the fermentations were harvested at maximum erythromycin titers. Transmission of erythromycin stayed approximately constant as a function of fermentation time for both media, however, for the OBM the permeate flux decreased with time which correlated with an increase in broth viscosity. The relatively poor microfiltration performance of the OBM medium was, however, offset by the higher titers of erythromycin that were achieved during the fermentation. The filtration characteristics of the SCM broth did not show any correlation with either broth viscosity or fermentation time. Image-analysis data suggested that there was a correlation between hyphal morphology (main hyphal length) and permeate flux (no such correlation was found for the OBM broth). Moreover, it has been shown for the OBM broth that the residual flour had a profound effect on the microfiltration characteristics. The influence of the residual flour was greater than that imposed by the morphology and concentration of the biomass. The understanding of the factors governing the interaction of the fermentation and microfiltration operations obtained in this work provides a first step towards optimization of the overall process sequence.     

Factors affecting membrane fouling in filtration of Saccharomyces cerevisiae in an internal ceramic filter bioreactor

Filtration of ethanol fermentation medium and broth by using symmetric and asymmetric ceramic membranes has been studied in an internal filter bioreactor. Factors studied included membrane structure and pore size, medium sterilization, and concentrations of glucose, yeast extract in the medium, yeast cell and protein in broth. The aim was to determine the main factors responsible for the decline in filtration performance during ethanol fermentation by Saccharomyces cerevisiae. Flux index (Fi) of a new concept has been developed to evaluate the degree of flux decline during the membrane fouling process. Fi was defined as the ratio of the membrane flux at certain filtration time (t?=?t) to the initial (t?=??0) flux of pure water, not the initial (t?=?+0) flux of the test fluid. Flux with sterilized medium was approximately two-fold higher than that with unsterilized medium although the reason could not be explained clearly. Glucose, interaction between glucose and yeast extract, yeast cells, and proteins in fermentation broth were found to play an important part in membrane fouling. Fi of the symmetric membrane decreased to a less extent than that of the asymmetric membrane with increasing glucose concentration. But, the result with various yeast cell concentrations turned out to be contrary. Fouling was more serious for asymmetric membrane during the filtration of fermentation supernatant. This was thought to be due to different fouling mechanisms for the two types of membrane.     

Development of crossflow filtration processes for the commercial-scale isolation of a bacterial lipase

Isolation of a lipase produced by Pseudomonas aeruginosa (MW 29,000) employed crossflow microfiltration for production of a cell-free enzyme solution and crossflow ultrafiltration for concentration of the enzyme and removal of low molecular weight impurities. Poor flux and enzyme permeation were measured during initial screening of various microfiltration membrane types for isolation of the enzyme from a peptonized-milk-based broth; the results suggested that a soluble broth component was forming a gel layer which controlled both hydraulic flux and enzyme permeation. Reformulation of the fermentation medium resulted in enhanced performance, obtaining fluxes of 40 l/h m² and enzyme permeation of 50% on hydrophilically-modified PVDF membranes and resulted in a feasible clarification process. Enzyme permeation remained constant with respect to activity in the feed, rather than being proportional to activity in the retentate; it was hypothesized that this resulted from a concomitant concentration of the gel-forming components with cell concentration. Concentration of the clarified enzyme solution was performed using 30 000 MWCO regenerated cellulose membranes. Complete enzyme retention and high flux (57 l/h m²) were maintained through a 130-fold concentration of the microfiltrate. As both systems were taken to the 100 and 1000 l scales, similar filtration performances were obtained with system hold-up volume and pump cavitation becoming important considerations at the larger scales. Excellent reproducibility was observed in a series of eight large-scale experiments.     

Microfiltration of yeast suspensions with self-cleaning spiral vortices: possibilities for a new membrane module design

A novel method of producing controlled vortices was used to reduce both concentration polarization and membrane fouling during microfiltration of Saccharomyces cerevisiae broth suspensions. The method involves flow around a curved channel at a sufficient rate so as to produce centrifugal instabilities (called Dean vortices). These vortices depolarize the build-up of suspended particles such as yeast cells at the membrane-solution interface and allow for increased membrane permeation rates. Various operating conditions under which such vortices effectively reduced cake build-up of suspended particles such as yeast cells at the membrane-solution interface and allow for increased membrane permeation rates. Various operating conditions under which such vortices effectively reduced cake build-up during microfiltration of 0 to 0.55 dry wt% yeast broth were investigated. Flux improvements of over 60% for 0.25 dry wt% yeast broth for flow with over that without Dean vortices were observed. This beneficial effect increased with increasing retentate flow rate and increasing transmembrane pressure and decreased with increasing concentration of suspended matter. Similar behavior was observed whether the cells were viable of killed. the improvement in flux in the presence over that in the absence of vortices correlated well with centrifugal force or azimuthal velocity squared. The relative cake resistances increased with reservoir yeast concentration. These values with vortices increased from 62% to 75% of that without vortices with increasing yeast concentration. The ratio of the cake thicknesses in the limiting case (at high feed concentration) was 3.25. These results suggest that self-cleaning spiral vortices could be effective in maintaining good and steady microfiltration performance with cell suspensions other than those tested. (c) 1995 John Wiley & Sons, Inc.     

Purification during crossflow electromicrofiltration of fermentation broth

The present study was to investigate the purification of a fermentation broth by an electromicrofiltration membrane. Microfiltration runs with a crude and a centrifuged broth, with solution of particles recovered from centrifugation and with permeates from microfiltration experiments were thus compared.Microfiltration performances were governed by colloids and small particles that induced sharp initial flux declines. For these results, the evolution of the overall membrane resistance was increased by 80% in comparison with the electromicrofiltration membrane. The main focus of this study was set on the enhancement of the filtrate flux by an electric field. This pressure electrofiltration leads to a drastic improvement of the filtration by 100% and the filtration time was thereby reduced. Pressure electrofiltration serves as an interesting alternative to the cross-flow filtration and it effectively separates advantageous constituents such as amino acids and biopolymers from a fermentation broth. They were equally maintained during the microelectrofiltration, although they were significantly reduced by 45% by the microfiltration without the application of an electric field. Accordingly, since the electrofiltration membrane was provided more permeability, this study experimentally demonstrates that the permeability inside a membrane can be controlled using an electric field.     

A new integrated membrane filtration and chromatographic device

To improve protein separation, a novel integrated device combining membrane filtration and chromatography has been developed. The device basically consists of a hollow fiber filtration module whose shell side is filled with chromatographic resin beads. However, there is an essentially impermeable coated zone near the hollow fiber module outlet. The integrated device enjoys the advantages of both membrane filtration and chromatography; it also allows one to load the chromatographic media directly from the fermentation broth or lysate and separate the adsorbed proteins through the subsequent elution step in a cyclic process. Interfacial polymerization was carried out to coat the bottom section of the hollow fiber membrane; the rest of the hollow fiber membrane remained unaffected. Myoglobin (Mb) and alpha-lactalbumin (alpha-LA) were primarily used as model proteins in a binary mixture; binary mixtures of Mb and bovine serum albumin (BSA) were also investigated. Separation behaviors of binary protein mixtures were studied in devices having either an ultrafiltration (UF) or a microfiltration (MF) membrane. Experimental results show that the breakthrough time and the protein loading capacities were dramatically improved after introducing the impermeable coating in both UF and MF modules. For a synthetic yeast fermentation broth feed, four loading-washing-elution-reequilibration-based cyclic runs for separation of Mb and alpha-LA were performed in the device using a MF membrane with a coated zone without cleaning in between. The Mb and alpha-LA elution profiles for the four consecutive runs were almost superimposable. Due to lower transmembrane flux in this device plus the periodical washing-elution during the chromatographic separation, fouling was not a problem, unlike in conventional microfiltration.     

Process engineering for a membrane recycle fermentor

Membrane recycle fermentors are used successfully on laboratory scale to increase the efficiency of fermentation processes. The design of a process on larger scale however is obstructed by the lack of relevant data in literature. Compared to a stand-alone fermentor a membrane recycle fermentor presents new features which must be considered in the design. These features include the use of high density cultures, the additional volume in the membrane section and the circulation of the broth. In this theoretical study these aspects are analyzed with the characteristic time concept, in case of an ethanol fermentation integrated with microfiltration. The analysis shows that depending on the reactor configuration used concentration gradients can be expected. These gradients may decrease the efficiency of the fermentation, or can be advantageous, for example by letting the substrate conversion approach completion in the membrane section.     

Ethanol production in an integrated process of fermentation and ethanol recovery by pervaporation

In ethanol fermentations inhibition of the microorganism by ethanol limits the amount of substrate in the feed that can be converted. In a process high feed concentrations are desirable to minimize the flows. Such high feed concentrations can be realized in integrated processes in which ethanol is recovered from the fermentation broth as it is formed. In this study ethanol recovery by pervaporation was coupled to glucose fermentations by baker's yeast. Pervaporation was carried out with commercial silicone based hollow-fibre membrane modules with relatively high fluxes. Three different types of process configurations with pervaporation were investigated. Two of these configurations also included cell retention by microfiltration, in order to optimize the productivity. In the systems with pervaporation a feed containing 360 kg/m³ glucose could be converted almost completely. This feed concentration is a factor three higher than in a process without ethanol recovery. The productivity was 14 kg/m³ h in a system with pervaporation only, and could be increased to 43 kg/m³ h in the system with all recycle by microfiltration. The kinetic data suggest that accumulation of inhibitory compounds occurs in the integrated system. The integrated process was relatively easy in operation.     

A novel downstream process for 1,3-propanediol from glycerol-based fermentation

In this paper, a downstream process for purification of 1,3-propanediol from glycerol-based fermentation broth was investigated. The purification of 1,3-propanediol from fermentation broth was achieved by a process combining microfiltration, charcoal treatment, vacuum distillation, and silica gel chromatography. The broth was first filtered through hollow fiber cartridge, wherein 98.7% of biomass was removed. Soluble proteins and other color impurities in the broth were removed by the use of activated charcoal at optimal concentration of 30 g l⁻¹ where the soluble proteins in the broth decreased to 0.1 g l⁻¹ (96.0% protein loss). The obtained broth when concentrated by vacuum distillation resulted in the crystallization of inorganic salts. Subsequently, 1,3-propanediol was purified by gradient chromatography using silica gel as a stationary phase and mixture of chloroform and methanol as a mobile phase. Finally, with the optimal flow rate of 10 ml min⁻¹ and loading amount of 80 ml, the yield of 1,3-propanediol achieved was 89%. The overall yield of 1,3-propanediol using the proposed procedure was 75.47%. The developed method was found to be a simple, rapid, and efficient procedure for the purification of 1,3-propanediol from fermentation broth.     

电子嗅在线反馈控制毕赤酵母糖化酶发酵过程中甲醇浓度新方法的应用

探索了电子嗅传感仪直接通过发酵尾气进行发酵液中甲醇浓度在线检测的方法,建立了毕赤酵母表达糖化酶过程中甲醇浓度的自动化反馈补料控制模型,可准确实现发酵过程中甲醇浓度的精确控制;研究表明,当利用电子嗅将培养液中甲醇浓度稳定控制在(890±35)ppm水平下,发酵诱导培养到128h时目的蛋白糖化酶酶活达到了8 153U/ml,与甲醇浓度控制在(350±26)ppm时的发酵水平相比提升了48.8%。该方法具有无需前处理、与发酵液非接触、快速和准确性的优点,为提升工程酵母在工业发酵培养过程工艺的优化控制具有重要的指导作用。     

Aeration conditions in the process of tetracycline biosynthesis. The role of organic acids]

The effect of the aeration conditions on the content of volatile acids in the fermentation broth was studied. It was shown that deterioration of the aeration conditions during the process of biosynthesis in both flasks and 750 1 fermentors resulted in decreased levels of the antibiotic accumulation and was accompanied by a simultaneous increase in the concentration of the volatile acids in the culture fluid. Under unfavourable aeration conditions the volatile acids present in the fermentation broth in higher concentrations than under the optimal conditions had no effect. It was shown that the volatile acid concentration may be used as a parameter for the control of the aeration conditions and as an index of normal biosynthetic process.     

Production and rheological characteristics of the microbial polysaccharide gellan

B. MANNA, A. GAMBHIR AND P. GHOSH. 1996. Sphingomonas paucimobilis was used for the synthesis of the microbial polysaccharide gellan. In a 60 h fermentation, polysaccharide yield and productivity obtained were 0.45 g gellan per g glucose consumed and 0.21 g I⁻¹ h⁻¹ respectively. The broth showed pseudoplastic behaviour with yield stress. The requirement of the solvent propanol to precipitate gellan from the broth depended on the volume of the broth rather than on gellan concentration. The addition of salt to the broth reduced the propanol requirement. Attempts to separate cells from the highly viscous broth by microfiltration were not successful. Ultrafiltration reduced the propanol requirement but appreciable membrane fouling and loss of gellan was observed.     

Factors affecting foaming behavior in cellulase fermentation by Trichoderma reesei Rut C-30

Coupling fermentation with in situ foam fractionation may be beneficial to cellulase production in optimizing oligomer inducer generation, minimizing catabolite repression and reducing cellulase degradation by proteases. In this study, the potential factors that may affect the foaming behavior of broth from Trichoderma reesei Rut C-30 fermentation were examined. These factors included solid (both cell and cellulose) concentrations, cellulase activity and extracellular protein concentration. The loss of cellulase activity caused by the foaming process was minimal. The foamate generation was lower in the presence of higher solids (cell and/or cellulose) concentrations. Cellulase appeared to promote the broth foaming ability but its enrichment ratio was not high (lower than 1.2). The enrichment ratios for the individual component enzymes (beta-glucosidase, endo- and exo-glucanases) were found to be similarly low. None of the cellulase components were likely the primary foaming factors. The foam also carried out cells and cellulose solids. The hydrophobicity of cell surface, studied at various fermentation stages and in both media with and without cellulose, increased as the fermentation approached the stationary phase and then decreased gradually after entering the stationary phase.     

Successive membrane separation processes simplify concentration of lipases produced by Aspergillus niger by solid-state fermentation

In this study, we developed a simplified method for producing, separating, and concentrating lipases derived from solid-state fermentation of agro-industrial residues by filamentous fungi. First, we used Aspergillus niger to produce lipases with hydrolytic activity. We analyzed the separation and concentration of enzymes using membrane separation processes. The sequential use of microfiltration and ultrafiltration processes made it possible to obtain concentrates with enzymatic activities much higher than those in the initial extract. The permeate flux was higher than 60 L/m² h during microfiltration using 20- and 0.45-µm membranes and during ultrafiltration using 100- and 50-kDa membranes, where fouling was reversible during the filtration steps, thereby indicating that the fouling may be removed by cleaning processes. These results demonstrate the feasibility of lipase production using A. niger by solid-state fermentation of agro-industrial residues, followed by successive tangential filtration with membranes, which simplify the separation and concentration steps that are typically required in downstream processes.

     

Cross-flow membrane microfiltration of a bacteriol fermentation broth

Although cross-flow membrane filtration is a very attractive option for harvesting cells and recovering enzymes from cell homogenates, the process is not without its problems. Foremost of these is the deposit of dissolved and suspended solutes onto the membrane surface during operation. The formation of these dense and sometimes compressive sublayers (often called cakes) offers additional resistance to axial and permeate flows and often affects the retention characteristics of the process. In view of the complex nature of the sublayer formation process and its sensitivity to cross-flow velocity, this investigation was undertaken to determine the main factors responsible for the decline in performance during the harvesting of B. polymyxa broth by membrane microfiltration. System parameters varied include axial flow rate, concentration of cells, proteins and other components in the feed, membrane materials (ceramic, polypropylene, and stainless steel), and cleaning methods. To help explain the observed results, a new mass transport model-the solids flux model-based on the assumptions that back migration of particles from the sublayer or membrane surface is negligible and that particles that reach the solid-solution interface attach (stick) completely, is tested. Using a variety of diagnostic methods, magnesium ammonium phosphate precipitate is formed during steam sterilization of the medium and is implicated as the major foulant in this study.     

The Effect of Gas Sparging in Cross‐Flow Microfiltration of 2,3‐Butanediol Fermentation Broth

Recovery of 2,3‐butanediol from a fermentation broth entails the separation of cells and other suspended solids as the initial step for subsequent separation stages. The aim of this work was to study the cross‐flow filtration of broth in the fermentation of 2,3‐butanediol from blackstrap molasses by Klebsiella oxytoca (NRRL B‐199). A plate type laboratory scale cross‐flow microfiltration unit with a 0.2‐μm cellulose acetate membrane was employed for this purpose. Preliminary results showed that the permeate flux would decline rapidly due to fouling caused by the natural impurities of blackstrap molasses, and modifications of the conventional cross‐flow filtration would be essential to achieve a filtration rate appropriate for practical purposes. In this work, the permeate flux was enhanced by air sparging, which scoured the membrane surface of colloidal deposits and allowed a practical filtration rate to be maintained. The average permeate flux increased by 39 % and 54 % for an air sparging rate of 0.5 L/min and 1.0 L/min respectively, in the case of an initial biomass concentration of 4.66 g/L. For an initial biomass concentration of 14.2 g/L, the flux increased by 105 % and 146 % for the gas rate of 0.5 and 1.0 L/min, respectively. It may be concluded that gas sparging is beneficial in cross‐flow filtration of thick suspensions like a fermentation broth.     

Production of acetone butanol ethanol (ABE) by a hyper-producing mutant strain of Clostridium beijerinckii BA101 and recovery by pervaporation.

A silicone membrane was used to study butanol separation from model butanol solutions and fermentation broth. Depending upon the butanol feed concentration in the model solution and pervaporation conditions, butanol selectivities of 20.88-68.32 and flux values of 158.7-215.4 g m(-)(2) h(-)(1) were achieved. Higher flux values (400 g m(-)(2) h(-)(1)) were obtained at higher butanol concentrations using air as sweep gas. In an integrated process of butanol fermentation-recovery, solvent productivities were improved to 200% of the control batch fermentation productivities. In a batch reactor the hyper-butanol-producing mutant strain C. beijerinckii BA101 utilized 57.3 g/L glucose and produced 24.2 g/L total solvents, while in the integrated process it produced 51.5 g/L (culture volume) total solvents. Concentrated glucose medium was also fermented. The C. beijerinckii BA101 mutant strain was not negatively affected by the pervaporative conditions. In the integrated experiment, acids were not produced. With the active fermentation broth, butanol selectivity was reduced by a factor of 2-3. However, the membrane flux was not affected by the active fermentation broth. The butanol permeate concentration ranged from 26.4 to 95.4 g/L, depending upon butanol concentration in the fermentation broth. Since the permeate of most membranes contains acetone, butanol, and ethanol (and small concentrations of acids), it is suggested that distillation be used for further purification.     

Flux enhancement for membrane filtration of bacterial suspensions using high-frequency backpulsing

A promising method for reducing membrane fouling during crossflow microfiltration of biological suspensions is backpulsing. Very short backpulses (0.1-1.0 s) have been used to increase the net flux for washed bacterial suspensions and whole bacterial fermentation broths. The net fluxes under optimum backpulsing conditions for the washed bacteria are approximately 10-fold higher than those obtained during normal crossflow microfiltration operation, whereas only a 2-fold improvement in the net flux is achieved for the fermentation broths. A theory is presented that is based on external fouling during forward filtration and nonuniform cleaning of the membrane during reverse filtration. The model contains an adjustable parameter which is a measure of the cleaning efficiency during backpulsing; the cleaning efficiency found by fitting the model to the experiments increases with increasing frequency and duration of the backpulses. The theory predicts an optimum backpulsing frequency, as was observed experimentally. An economic analysis shows that crossflow microfiltration with backpulsing has lower costs than centrifugation, rotary vacuum filtration, and crossflow microfiltration without backpulsing.     

Flocculant interaction with native antibiotic solutions. The effect of flocculants on the quality indices of native solutions as dependent on a number of factors]

Flocculants had a significant effect on the characteristics of the fermentation broth filtrates of some antibiotics. They decreased the filtrate turbidity, concentration of the organic ballast, etc. The size of the floccules depended on a number of factors, including the fluocculant concentration, agitation rate, concentration of the dispersing phase in the initial filtrate. The optimal concentration of the flocculant was defined not only by the type of the antibiotic-producing organism but also by composition of the nutrient medium used for the biosynthesis. Floccculant treatment provided a significant increase in the quality of the fermentation broth filtrates with respect to the main parameters: levels of proteins, pigments, emulgation capacity.