An amperometric biosensor based on laccase immobilized onto Fe(3)O(4)NPs/cMWCNT/PANI/Au electrode for determination of phenolic content in tea leaves extract

A method is described for the construction of an amperometric biosensor for detection of phenolic compounds based on covalent immobilization of laccase onto iron oxide nanoparticles (Fe(3)O(4)NPs) decorated carboxylated multiwalled carbon nanotubes (cMWCNTs)/polyaniline (PANI) composite electrodeposited onto a gold (Au) electrode. The modified electrode was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The biosensor showed optimum response within 3s at pH 6.0 (0.1M sodium acetate buffer) and 35°C, when operated at 0.3V vs. Ag/AgCl. Linear range, detection limit were 0.1-10μM (lower concentration range) and 10-500μM (higher concentration range), and 0.03μM respectively. The sensor measured total phenolic content in tea leaves extract. The enzyme electrode lost 25% of its initial activity after its 150 uses over a period of 4 months, when stored at 4°C.     

An amperometric biosensor based on laccase immobilized onto MnO2NPs/cMWCNT/PANI modified Au electrode

A method is described for construction of an amperometric biosensor for detection of phenolic compounds based on covalent immobilization of laccase (Lac) onto manganese dioxide nanoparticles (MnO(2)NPs) decorated carboxylated multiwalled carbon nanotubes (cMWCNTs)/PANI composite electrodeposited onto a gold (Au) electrode through N-ethyl-N'-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxy succinimide (NHS) chemistry. The modified electrode was characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The biosensor showed optimum response at pH 5.5 (0.1M sodium acetate buffer) and 35°C, when operated at 0.3 V vs. Ag/AgCl. Linear range, response time, detection limit were 0.1-10 μM (lower concentration range) and 10-500 μM (higher concentration range), 4s and 0.04 μM, respectively. Biosensor measured total phenolic content in tea leaves extract. The enzyme electrode was used 150 times over a period of 5 months.     

Myoglobin immobilization on electrodeposited nanometer-scale nickel oxide particles and direct voltammetry

Prosperity of information on the reactions of redox-active sites in proteins can be attained by voltammetric studies in which the protein sample is located on a suitable surface. This work reports the presentation of myoglobin/nickel oxide nanoparticles/glassy carbon (Mb/NiO NPs/GC) electrode, ready by electrochemical deposition of the NiO NPs on glassy carbon electrode and myoglobin immobilization on their surfaces by the potential cycling method. Images of electrodeposited NiO NPs on the surface of glassy carbon electrode were obtained by scanning electron microscopy (SEM) and atomic force microscopy (AFM). A pair of well-defined redox peaks for Mb(Fe(III)-Fe(II)) was obtained at the prepared electrode by direct electron transfer between the protein and nanoparticles. Electrochemical parameters of immobilized myoglobin such as formal potential (E(0')), charge transfer coefficient (alpha) and apparent heterogeneous electron transfer rate constant (k(s)) were estimated by cyclic voltammetry and nonlinear regression analysis. Biocatalytic activity was exemplified at the prepared electrode for reduction of hydrogen peroxide.     

Transport of Surface-modified Carbon Nanotubes through a Soil Column

Carbon nanotubes (CNTs) are widely manufactured nanoparticles, which are being utilized in a number of consumer products, such as sporting goods, electronics and biomedical applications. Due to their accelerating production and use, CNTs constitute a potential environmental risk if they are released to soil and groundwater systems. It is therefore essential to improve the current understanding of environmental fate and transport of CNTs. The transport and retention of CNTs in both natural and artificial media have been reported in literature, but the findings widely vary and are thus not conclusive. There are a number of physical and chemical parameters responsible for variation in retention and transport. In this study, a complete procedure of selected multiwalled carbon nanotubes (MWCNTs) is presented starting from their surface modification to a complete set of laboratory column experiments at critical physical and chemical scenarios. Results indicate that the stability of the commercially available MWCNTs are critical with their attached surface functional group which can also influence the transport and retention of MWCNT through the surrounding medium.     

DNAzyme-functionalized Pt nanoparticles/carbon nanotubes for amplified sandwich electrochemical DNA analysis

A novel DNAzyme-functionalized Pt nanoparticles/carbon nanotubes (DNAzyme/Pt NPs/CNTs) bioconjugate was fabricated as trace tag for ultrasensitive sandwich DNA detection. The Pt NPs/CNTs were prepared via layer-by-layer (LBL) assembly of the Pt NPs and polyelectrolyte on the carboxylated CNTs, followed by the functionalization with the DNAzyme and reporter probe DNA through the platinum-sulfur bonding. The subsequent sandwich-type DNA specific reaction would confine numerous DNAzyme/Pt NPs/CNTs bioconjugate onto the gold electrode surface for amplifying the signal. In the presence of 3,3',5,5' tetramethylbenzidine (TMB) which could be oxidized by the DNAzyme, electrochemical signals could be generated by chronoamperometry via the interrogation of reduction electrochemical signal of oxidized TMB. The constructed DNA sensor exhibited a wide linear response to target DNA ranging from 1.0fM to 10pM with the detection limit down to 0.6fM and exhibited excellent selectivity against even a single base mismatch. In addition, this novel DNA sensor showed fairly good reproducibility, stability, and reusability.     

A sensitive NADH and glucose biosensor tuned by visible light based on thionine bridged carbon nanotubes and gold nanoparticles multilayer

A NADH and glucose biosensor based on thionine cross-linked multiwalled carbon nanotubes (MWNTs) and Au nanoparticles (Au NPs) multilayer functionalized indium-doped tin oxide (ITO) electrode were presented in this paper. The effect of light irradiation on the enhancement of bioelectrocatalytic processes of the biocatalytic systems by the photovoltaic effect was investigated. This bioelectrode exhibited excellent catalytic activity of the oxidation towards dihydronicotinamide adenine dinucleotide (NADH). Most interesting, the performance of this NADH sensor could be tuned by the visible light. When the biosensor was performed in the dark, the anodic current increased linearly with NADH concentration over the range from 0.5 to 237 microM with detection limit 0.1 microM and sensitivity 17 nA microM(-1). The sensitivity became 115 nA microM(-1) with detection limit 0.05 microM with the light irradiation. Compared with the reaction in dark, the sensitivity increased around 7 folds while the detection limit decreased 2 folds. The glucose biosensor also exhibited the same behavior. The linear range was from 10 microM to 2.56 mM with the sensitivity of 7.8 microAmM(-1) and detection limit 5.0 microM in the dark. After the light irradiation, the linear range was from 1 microM to 3.25 mM with the sensitivity of 18.5 microA mM(-1) and detection limit 0.7 microM. It indicated a potential to provide an operational access to develop new kinds of photocontrolled dehydrogenase enzyme-based bioelectronics.     

Strategically functionalized carbon nanotubes as the ultrasensitive electrochemical probe for picomolar detection of sildenafil citrate (Viagra)

The present work demonstrates the utility of the functionalized carbon nanotubes, poly(4-aminobenzene sulfonic acid) (PABS) grafted multiwalled carbon nanotubes, MWNT-g-PABS, as an electrode modifier towards achieving ultrasensitive detection of a model drug, sildenafil citrate (SC). PABS units in MWNT-g-PABS interact with SC, pre-concentrate and accumulate at the surface. The electron transduction from SC to electrode is augmented via MWNT-g-PABS. As a result, the MWNT-g-PABS modified electrode exhibited ultrasensitive (57.7 μA/nM) and selective detection of SC with a detection limit of 4.7 pM. The present work provides scope towards targeting ultrasensitivity for the detection of biomolecules/drug through rational design and incorporation of appropriate chemical components to carbon nanotubes.     

Hierarchical Microcables Constructed by CoP@C⊂Carbon Framework Intertwined with Carbon Nanotubes for Efficient Lithium Storage

Transition‐metal phosphides (TMPs)‐based electrode materials with high capacity have attracted considerable interest as a promising anode material for lithium?ion batteries (LIBs). Herein, a hierarchical cable‐like structure composed of CoP@C core?shell nanoparticles (NPs) encapsulated in one‐dimensional (1D) porous carbon framework intertwined with N‐doped carbon nanotubes (CoP@C?PCF/NCNTs) is synthesized by a self‐templating, self‐catalytic, and subsequent vapor‐phase phosphorization strategy. The unique nanoarchitecture regime provides multiple advantages. The 1D carbon framework allows for quick ion and electron access, maintaining the integrity and accommodating the volume change of the structure during repeated discharging/charging. The internal carbon shell can prevent the direct aggregation of CoP NPs on cycling. The external NCNTs on the surface supply a staggered conductive network to promote electrolyte penetration and charge transportation. Impressively, the as‐fabricated hybrid nanocables deliver a reversible capacity of 712 mAh g^?1 at 0.5 A g^?1 for over 700 cycles with excellent rate capability as an anode material for LIBs. The significantly improved lithium storage properties of CoP@C?PCF/NCNTs reveal the importance of reasonable design and engineering of novel hierarchical structures with higher complexity.     

Supramolecular conjugates of carbon nanotubes and DNA by a solid-state reaction

DNA-wrapped nanotubes of both multiwalled and single-walled carbon nanotubes were obtained by a solid-state mechanochemical reaction. Scanning electron microscopic images show that the nanotubes were cut into shorter lengths and were fully covered with DNA, which was further confirmed by fluorescence microscopy. This resulted in a high aqueous solubility of the products with a stability of >6 months. The results show that nanotubes were cut also with uniform distribution where >90% of the multiwalled products were 500 nm to 3 microm and 80% of the single-walled products were 250 nm to 1 microm in length, respectively. UV-vis spectra and gel electrophorosis show that the DNA in the product is intact. This facile technique for obtaining supramolecularly masked, water-soluble carbon nanotubes by a solid-state reaction has a great potential for both biological and nonbiological applications of nanotubes.     

Electrochemical DNA biosensor based on silver nanoparticles/poly(3-(3-pyridyl) acrylic acid)/carbon nanotubes modified electrode

In this work, we present an electrochemical DNA sensor based on silver nanoparticles/poly(trans-3-(3-pyridyl) acrylic acid) (PPAA)/multiwalled carbon nanotubes with carboxyl groups (MWCNTs-COOH) modified glassy carbon electrode (GCE). The polymer film was electropolymerized onto MWCNTs-COOH modified electrode by cyclic voltammetry (CV), and then silver nanoparticles were electrodeposited on the surface of PPAA/MWCNTs-COOH composite film. Thiol group end single-stranded DNA (HS-ssDNA) probe was easily covalently linked onto the surface of silver nanoparticles through a 5′ thiol linker. The DNA hybridization events were monitored based on the signal of the intercalated adriamycin by differential pulse voltammetry (DPV). Based on the response of adriamycin, only the complementary oligonucleotides gave an obvious current signal compared with the three-base mismatched and noncomplementary oligonucleotides. Under the optimal conditions, the increase of reduction peak current of adriamycin was linear with the logarithm of the concentration of the complementary oligonucleotides from 9.0 × 10⁻¹² to 9.0 × 10⁻⁹ M with a detection limit of 3.2 × 10⁻¹² M. In addition, this DNA sensor exhibited an excellent reproducibility and stability during DNA hybridization assay.     

The high dispersion of DNA-multiwalled carbon nanotubes and their properties

DNA-wrapped multiwalled carbon nanotubes (MWCNTs) were successfully obtained by a simple sonication treatment method. The obtained materials were characterized in detail by Raman spectroscopy and scanning electron microscopy (SEM). An SEM image showed that MWCNTs were dispersed sufficiently and covered entirely with DNA. This resulted in high aqueous solubility of the products, with a stability of more than several months. The interaction between DNA and MWCNTs was confirmed by Raman measurements and was ascribed to the strong π-π interactions between the backbones of DNA and the surface of carbon nanotubes. The cyclic voltammograms showed that the composite exhibited excellent electrochemical properties. Experimental results also revealed that the high dispersion of DNA-assisted MWCNTs presented a better property compared with pristine MWCNTs. This facile method for obtaining water-soluble MWCNTs has great potential application for both bioscience and biotechnology.     

Antioxidant and antibacterial activities of eugenol and carvacrol‐grafted chitosan nanoparticles

Essential oils are known to possess antimicrobial and antioxidant activity while chitosan is a biocompatible polymer with antibacterial activity against a broad spectrum of bacteria. In this work, nanoparticles with both antioxidant and antibacterial properties were prepared by grafting eugenol and carvacrol (two components of essential oils) on chitosan nanoparticles. Aldehyde groups were first introduced in eugenol and carvacrol, and the grafting of these oils to chitosan nanoparticles was carried out via the Schiff base reaction. The surface concentration of the grafted essential oil components was determined by X‐ray photoelectron spectroscopy (XPS). The antioxidant activities of the carvacrol‐grafted chitosan nanoparticles (CHCA NPs) and the eugenol‐grafted chitosan nanoparticles (CHEU NPs) were assayed with diphenylpicrylhydrazyl (DPPH). Antibacterial assays were carried out with a representative gram‐negative bacterium, Escherichia coli (E. coli) and a gram‐positive bacterium, Staphylococcus aureus (S. aureus). The grafted eugenol and carvacrol conferred antioxidant activity to the chitosan nanoparticles, and the essential oil component‐grafted chitosan nanoparticles achieved an antibacterial activity equivalent to or better than that of the unmodified chitosan nanoparticles. Cytotoxicity assays using 3T3 mouse fibroblast showed that the cytotoxicity of CHEU NPs and CHCA NPs were significant lower than those of the pure essential oils. Biotechnol. Bioeng. 2009; 104: 30–39 © 2009 Wiley Periodicals, Inc.     

Enhanced conjugation of Candida rugosa lipase onto multiwalled carbon nanotubes using reverse micelles as attachment medium and application in nonaqueous biocatalysis

Three liquid phases (viz. aqueous, nonaqueous, and reverse micelles) were scrutinized as medium for attachment of the enzyme Candida rugosa lipase (CRL) onto multiwalled carbon nanotubes (CNTs). The nanotubes were functionalized to attain carboxyl and amino groups on their surfaces before enzyme conjugation. Transmission electron microscopy and Fourier transformation infrared spectroscopic studies were used for characterization of the nanotubes during the course of functionalization. High enzyme loadings associated with the functionalized CNTs were observed when reverse micelles were used as the attachment medium. In addition, high activity in terms of ester synthesis in organic solvents was also observed while using those preparations. The nanobioconjugates prepared using reverse micelles were found to be highly sturdy and exhibited appreciable operational stability of around 95 ± 3% at 20th cycle (in case of carboxylated nanotubes) and 90 ± 5% at 10th cycle (in case of aminated nanotubes) for esterification. This shows the potential application of reverse micelles as the attachment medium for surface active enzymes such as CRL onto CNTs. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:828–836, 2014     

Magnetic–Plasmonic FePt@Ag Core–Shell Nanoparticles and Their Magnetic and SERS Properties

Magnetic–plasmonic FePt@Ag core–shell nanoparticles (NPs) with different Ag shell thicknesses were successfully synthesized using a seed-mediated method. They presented not only localized surface plasmon resonance in the visible region, but also superparamagnetic behavior at room temperature. When normalized by the weight of FePt, the saturation magnetization of the FePt@Ag NPs was found to be higher than that of FePt NPs, suggesting that the Ag shell effectively passivated the FePt NP surfaces, avoiding the direct interaction between the FePt core and surface capping ligands that typically forms a magnetically dead layer in FePt NPs. Despite the high colloidal stability and the small size of the FePt@Ag NPs, the NPs were easily separated using a permanent magnet. The surface enhanced Raman scattering (SERS) activity of the FePt@Ag NPs was then examined using thiophenol as a Raman reporter molecule and was found to be equivalent to that of Ag NPs. Moreover, the SERS activity of the FePt@Ag NPs was enhanced when a magnetic field was applied during the preparation of the SERS substrate (FePt@Ag NP film). These FePt@Ag NPs hold promise as dual-functional sensing probes for environmental and diagnostic applications.     

Preparation of gold nanoparticles/functionalized multiwalled carbon nanotube nanocomposites and its glucose biosensing application

Gold nanoparticles stabilized by amino-terminated ionic liquid (Au-IL) have been in situ noncovalently deposited on poly(sodium 4-styrene-sulfonate) (PSS)-functionalized multiwalled carbon nanotubes (MWCNTs) to form a MWCNTs/PSS/Au-IL nanocomposite. PSS can interact with MWCNTs through hydrophobic interaction. Amino-terminated ionic liquid was applied to reduce aqueous HAuCl(4), and the resulting gold nanoparticles were attached to the PSS-functionalized MWCNTs simultaneously. Most gold nanoparticles dispersed well on the functionalized MWCNTs. Transmission electron microscopy, Raman and X-ray photoelectron spectroscopy were used to confirm the composition and structure of the nanocomposites. The resulting MWCNTs/PSS/Au-IL composite exhibits good electrocatalysis toward oxygen and hydrogen peroxide reduction. And good biocompatibility with glucose oxidase was also demonstrated due to its good biocatalysis toward glucose substrate, which offered a friendly environment for the immobilization of biomolecules. Such bionanocomposite provides us potential applications in fabrication of biosensors. The resulting biosensor exhibits good response to glucose with a low detection limit 25 microM. It also has excellent reproducibility, satisfied operational stability and good storage stability.     

Silver nanoparticles/multiwalled carbon nanotube/polyaniline film for amperometric glutathione biosensor

A new silver nanoparticles (AgNPs)/carboxylated multiwalled carbon nanotubes (c-MWCNT)/polyaniline (PANI) film has been synthesized on Au electrode using electrochemical techniques. The enzyme glutathione oxidase (GSHOx) (EC 1.8.3.3) was immobilized covalently on the surface of AgNPs/c-MWCNT/PANI/Au electrode to construct the glutathione biosensor. The modified electrode was characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and Fourier transform infrared (FTIR) spectrophotometry. The biosensor showed optimum response within 4s at +0.4V vs. Ag/AgCl, pH 6.0 and 35 °C, with a linear working range of 0.3-3500 μM and a detection limit of 0.3 μM. The glutathione biosensor was employed for measurement of glutathione content in hemolysated erythrocyte (RBC). The sensor was evaluated with 97.77% and 99.16% recovery of added glutathione in hemolysated RBC and 2.4% and 6.3% within and between batch coefficients of variation (CVs) respectively. The enzyme electrode lost 50% of its initial activity after 300 uses over a period of 3 months, when stored at 4 °C. The biosensor has the advantages over earlier biosensors in terms of greater stability, lower response time and no interference by a number of RBC hemolysate substances.     

Gefitinib loaded PLGA and chitosan coated PLGA nanoparticles with magnified cytotoxicity against A549 lung cancer cell lines

In the current study, gefitinib loaded PLGA nanoparticles (GFT-PLGA-NPs) and chitosan coated PLGA nanoparticles (GFT-CS-PLGA-NPs) were synthesized to investigate the role of surface charge of NPs for developing drug delivery system for non-small-cell lung cancer (NSCLC). The developed NPs were evaluated for their size, PDI, zeta potential (ZP), drug entrapment, drug loading, DSC, FTIR, XRD, in vitro release profile, and morphology. The anti-cancer activity of GFT loaded PLGA NPs and GFT loaded CS-PLGA-NPs were examined in human A549 lung cancer cell lines. In vitro release studies of GFT-CS-PLGA-NPs showed more sustained release in comparison to GFT-PLGA-NPs due surface charge attraction of chitosan. In addition, viability of A549 cells decreases significantly with the increasing concentration of GFT-PLGA NPs and GFT-CS-PLGA-NPs when compared to that of pure GFT and blank PLGA NPs. In addition, the microscopic analysis and counting of viable cells also validate the cytotoxicity of the developed NPs. This investigation proved that the developed NPs would be efficient carriers to deliver GFT with improved efficacy against NSCLC.     

Monolayer formation of human osteoblastic cells on vertically aligned multiwalled carbon nanotube scaffolds

Monolayer formation of SaOS‐2 (human osteoblast‐like cells) was observed on VACNT (vertically aligned multiwalled carbon nanotubes) scaffolds without purification or functionalization. The VACNT were produced by a microwave plasma chemical vapour deposition on titanium surfaces with nickel or iron as catalyst. Cell viability and morphology studies were evaluated by LDH (lactate dehydrogenase) release assay and SEM (scanning electron microscopy), respectively. The non‐toxicity and the flat spreading with monolayer formation of the SaOs‐2 on VACNT scaffolds surface indicate that they can be used for biomedical applications.     

Effect of the surface charge density of nanoparticles on their translocation across pulmonary surfactant monolayer: a molecular dynamics simulation

Interaction between nanoparticles (NPs) and pulmonary surfactant monolayer plays a very significant role in nanoparticle-based pulmonary drug delivery system. Previous researches have indicated that different properties of nanoparticles can affect their translocation across pulmonary surfactant monolayer. Here we performed coarse-grained molecular dynamics simulation aimed at nanoparticles’ surface charge density effect on their penetration behaviours. Several hydrophilic nanoparticles with different surface charge densities were modelled in the simulations. The results show that NPs’ surface charge density affects their translocation capability: the higher the surface charge densities of NPs are, the worse their translocation capability is. It will cause the structural changes of pulmonary surfactant monolayer, and inhibit the normal phase transition of the monolayer during the compression process. Besides, charged NPs can be adsorbed on the surface of the monolayer after translocation as a stable state, and the adsorption capability of NPs increases generally with the increase of surface charge densities. Our simulation results suggest that the study of nanoparticle-based pulmonary drug delivery system should consider the nanoparticles’ surface charge density effect in order to avoid biological toxicity and improve efficacy.     

Polyamidoamine-grafted multiwalled carbon nanotubes for gene delivery: synthesis, transfection and intracellular trafficking

Functionalized multiwalled carbon nanotubes (f-MWNTs) are of great interest and designed as a novel gene delivery system. In this paper, we presented synthesis of polyamidoamine-functionalized multiwalled carbon nanotubes (PAA-g-MWNTs) and their application as a novel gene delivery system. The PAA-g-MWNTs, obtained from amide formation between PAA and chemically oxidized MWNTs, were stable in aqueous solution and much less toxic to cells than PAA and PEI 25KDa. More importantly, PAA-g-MWNTs showed comparable or even higher transfection efficiency than PAA and PEI at optimal w/w ratio. Intracellular trafficking of Cy3-labeled pGL-3 indicated that a large number of Cy3-labeled pGL-3 were attached to nucleus membrane, the majority of which was localized in nucleus after incubation with cells for 24 h. We have demonstrated that PAA modification of MWNTs facilitate higher DNA uptake and gene expression in vitro. All these facts suggest potential application of PAA-g-MWNTs as a novel gene vector with high transfection efficiency and low cytotoxicity.