Effect of lactose permease presence on the structure and nanomechanics of two-component supported lipid bilayers

In this paper we present a comparative study of supported lipid bilayers (SLBs) and proteolipid sheets (PLSs) obtained from deposition of lactose permease (LacY) of Escherichia coli proteoliposomes in plane. Lipid matrices of two components, phosphatidylethanolamine (PE) and phosphatidylglycerol (PG), at a 3:1, mol/mol ratio, were selected to mimic the inner membrane of the bacteria. The aim was to investigate how species of different compactness and stiffness affect the integration, distribution and nanomechanical properties of LacY in mixtures of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) or 1,2-palmitoyl-sn-glycero-3-phosphoethanolamine (DPPE) with 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPG). Both compositions displayed phase separation and were investigated by atomic force microscopy (AFM) imaging and force-spectroscopy (FS) mode. PLSs displayed two separated, segregated domains with different features that were characterised by FS and force-volume mode. We correlated the nanomechanical characteristics of solid-like gel phase (L_β) and fluid liquid-crystalline phase (L_α) with phases emerging in presence of LacY. We observed that for both compositions, the extended PLSs showed a L_β apparently formed only by lipids, whilst the second domain was enriched in LacY. The influence of the lipid environment on LacY organisation was studied by performing protein unfolding experiments using the AFM tip. Although the pulling experiments were unspecific, positive events were obtained, indicating the influence of the lipid environment when pulling the protein. A possible influence of the lateral surface pressure on this behaviour is suggested by the higher force required to pull LacY from DPPE:POPG than from POPE:POPG matrices. This is related to higher forces governing protein–lipid interaction in presence of DPPE.     

Preferential insertion of lactose permease in phospholipid domains: AFM observations

We report the insertion of a transmembrane protein, lactose permease (LacY) from Escherichia coli (E. coli), in supported lipid bilayers (SLBs) of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG), in biomimetic molar proportions. We provide evidence of the preferential insertion of LacY in the fluid domains. Analysis of the self-assembled protein arrangements showed that LacY: (i) is inserted as a monomer within fluid domains of SLBs of POPE:POPG (3:1, mol/mol), (ii) has a diameter of approx. 7.8 nm; and (iii) keeps an area of phospholipids surrounding the protein that is compatible with shells of phospholipids.     

Evidence of phosphatidylethanolamine and phosphatidylglycerol presence at the annular region of lactose permease of Escherichia coli

Biochemical and structural work has revealed the importance of phospholipids in biogenesis, folding and functional modulation of membrane proteins. Therefore, the nature of protein-phospholipid interaction is critical to understand such processes. Here, we have studied the interaction of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPG) mixtures with the lactose permease (LacY), the sugar/H⁺ symporter from Escherichia coli and a well characterized membrane transport protein. FRET measurements between single-W151/C154G LacY reconstituted in a lipid mixture composed of POPE and POPG at different molar ratios and pyrene-labeled PE or PG revealed a different phospholipid distribution between the annular region of LacY and the bulk lipid phase. Results also showed that both PE and PG can be part of the annular region, being PE the predominant when the PE:PG molar ratio mimics the membrane of E. coli. Furthermore, changes in the thermotropic behavior of phospholipids located in this annular region confirm that the interaction between LacY and PE is stronger than that of LacY and PG. Since PE is a proton donor, the results obtained here are discussed in the context of the transport mechanism of LacY.     

Lactose permease lipid selectivity using Förster resonance energy transfer

The phospholipid composition that surrounds a membrane protein is critical to maintain its structural integrity and, consequently, its functional properties. To understand better this in the present work we have performed FRET measurements between the single tryptophan residue of a lactose permease Escherichia coli mutant (single-W151/C154G LacY) and pyrene-labeled phospholipids (Pyr-PE and Pyr-PG) at 37 °C. We have reconstituted this LacY mutant in proteoliposomes formed with heteroacid phospholipids, POPE and POPG, and homoacid phospholipids DOPE and DPPE, resembling the same PE/PG proportion found in the E. coli inner membrane (3:1, mol/mol). A theoretical model has been fitted to the experimental data. In the POPE/POPG system, quantitative model calculations show accordance with the experimental values that requires an annular region composed of approximately ∼ 90 mol% PE. The experimental FRET efficiencies for the gel/fluid phase-separated DOPE/POPG system indicate a higher presence of PG in the annular region, from which it can be concluded that LacY shows clear preference for the fluid phase. Similar conclusions are obtained from analysis of excimer-to-monomer (E/M) pyrene ratios. To test the effects of this on cardiolipin (CL) on the annular region, myristoyl-CL and oleoyl-CL were incorporated in the biomimetic POPE/POPG matrix. The experimental FRET efficiency values, slightly larger for Pyr-PE than for Pyr-PG, suggest that CL displaces POPE and, more extensively, POPG from the annular region of LacY. Model fitting indicates that CL enrichment in the annular layer is, in fact, solely produced by replacing PG and that myristoyl-CL is not able to displace PE in the same way that oleoyl-CL does. One of the conclusions of this work is the fact that LacY inserts preferentially in fluid phases of membranes.     

A 2H Solid-State NMR Study of Lipid Clustering by Cationic Antimicrobial and Cell-Penetrating Peptides in Model Bacterial Membranes

Domain formation in bacteria-mimetic membranes due to cationic peptide binding was recently proposed based on calorimetric data. We now use ²H solid-state NMR to critically examine the presence and absence of domains in bacterial membranes containing zwitterionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylethanolamine (POPE) and anionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol (POPG) lipids. Chain-perdeuterated POPE and POPG are used in single-component membranes, binary POPE/POPG (3:1) membranes, and membranes containing one of four cationic peptides: two antimicrobial peptides (AMPs) of the β-hairpin family of protegrin-1 (PG-1), and two cell-penetrating peptides (CPPs), HIV TAT and penetratin. ²H quadrupolar couplings were measured to determine the motional amplitudes of POPE and POPG acyl chains as a function of temperature. Homogeneously mixed POPE/POPG membranes should give the same quadrupolar couplings for the two lipids, whereas the presence of membrane domains enriched in one of the two lipids should cause distinct ²H quadrupolar couplings that reflect different chain disorder. At physiological temperature (308 K), we observed no or only small coupling differences between POPE and POPG in the presence of any of the cationic peptides. However, around ambient temperature (293 K), at which gel- and liquid-crystalline phases coexist in the peptide-free POPE/POPG membrane, the peptides caused distinct quadrupolar couplings for the two lipids, indicating domain formation. The broad-spectrum antimicrobial peptide PG-1 ordered ∼40% of the POPE lipids while disordering POPG. The Gram-negative selective PG-1 mutant, IB549, caused even larger differences in the POPE and POPG disorder: ∼80% of POPE partitioned into the ordered phase, whereas all of the POPG remained in the disordered phase. In comparison, TAT rigidified POPE and POPG similarly in the binary membrane at ambient temperature, indicating that TAT does not cause dynamic heterogeneity but interacts with the membrane with a different mechanism. Penetratin maintained the POPE order but disordered POPG, suggesting moderate domain separation. These results provide insight into the extent of domain formation in bacterial membranes and the possible peptide structural requirements for this phenomenon.     

Poly-l-lysines and poly-l-arginines induce leakage of negatively charged phospholipid vesicles and translocate through the lipid bilayer upon electrostatic binding to the membrane

Poly-l-lysines (PLL) and poly-l-arginines (PLA) of different polymer chain lengths interact strongly with negatively charged phospholipid vesicles mainly due to their different electrical charges. 1-Palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG), 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG) and their mixtures (1/1 mol/mol) with the respective phosphatidylcholines of equivalent chain length were chosen as model membrane systems that form at room temperature either the fluid L_α or the gel phase L_β lipid bilayer membranes, respectively. Leakage experiments revealed that the fluid POPG membranes are more perturbed compared to the gel phase DPPG membranes upon peptide binding. Furthermore, it was found that pure PG membranes are more prone to release the vesicle contents as a result of pore formation than the lipid mixtures POPG/POPC and DPPG/DPPC. For the longer polymers (≥ 44 amino acids) maximal dye-release was observed when the molar ratio of the concentrations of amino acid residues to charged lipid molecules reached a value of R_P = 0.5, i.e. when the outer membrane layer was theoretically entirely covered by the polymer. At ratios lower or higher than 0.5 leakage dropped significantly. Furthermore, PLL and PLA insertions and/or translocations through lipid membranes were analyzed by using FITC-labeled polymers by monitoring their fluorescence intensity upon membrane binding. Short PLL molecules and PLA molecules of all lengths seemed to translocate through both fluid and gel phase lipid bilayers. Comparison of the PLL and PLA fluorescence assay results showed that PLA interacts stronger with phospholipid membranes compared to PLL. Isothermal titration calorimetry (ITC) measurements were performed to give further insight into these mechanisms and to support the findings obtained by fluorescence assays. Cryo-transmission electron microscopy (cryo-TEM) was used to visualize changes in the vesicles' morphology after addition of the polypeptides.     

Critical effects of polar fluorescent probes on the interaction of DHA with POPC supported lipid bilayers

The understanding of lipid bilayer structure and function has been advanced by the application of molecular fluorophores. However, the effects of these probe molecules on the physicochemical properties of membranes being studied are poorly understood. A quartz crystal microbalance with dissipation monitoring instrument was used in this work to investigate the impact of two commonly used fluorescent probes, 1‑palmitoyl‑2‑{12‑[(7‑nitro‑2‑1,3‑benzoxadiazol‑4‑yl)amino]dodecanoyl}‑sn‑glycero‑3‑phosphocholine (NBD-PC) and 1,2‑dipalmitoyl‑sn‑glycero‑3‑phosphoethanolamine‑n‑(lissamine rhodamine‑B‑sulfonyl) (Lis-Rhod PE), on the formation and physicochemical properties of a 1‑palmitoyl‑2‑oleoyl‑sn‑glycero‑3‑phosphocholine supported lipid bilayer (POPC-SLB). The interaction of the POPC-SLB and fluorophore-modified POPC-SLB with docosahexaenoic acid, DHA, was evaluated. The incorporation of DHA into the POPC-SLB was observed to significantly decrease in the presence of the Lis-Rhod PE probe compared with the POPC-SLB. In addition, it was observed that the small concentration of DHA incorporated into the POPC:NBD-PC SLB can produce rearrangement processes followed by the lost not only of DHA but also of POPC or NBD-PC molecules or both during the washing step. This work has significant implications for the interpretation of data employing fluorescent reporter molecules within SLBs.     

A H Solid-State NMR Study of Lipid Clustering by Cationic Antimicrobial and Cell-Penetrating Peptides in Model Bacterial Membranes

Domain formation in bacteria-mimetic membranes due to cationic peptide binding was recently proposed based on calorimetric data. We now use ²H solid-state NMR to critically examine the presence and absence of domains in bacterial membranes containing zwitterionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylethanolamine (POPE) and anionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol (POPG) lipids. Chain-perdeuterated POPE and POPG are used in single-component membranes, binary POPE/POPG (3:1) membranes, and membranes containing one of four cationic peptides: two antimicrobial peptides (AMPs) of the β-hairpin family of protegrin-1 (PG-1), and two cell-penetrating peptides (CPPs), HIV TAT and penetratin. ²H quadrupolar couplings were measured to determine the motional amplitudes of POPE and POPG acyl chains as a function of temperature. Homogeneously mixed POPE/POPG membranes should give the same quadrupolar couplings for the two lipids, whereas the presence of membrane domains enriched in one of the two lipids should cause distinct ²H quadrupolar couplings that reflect different chain disorder. At physiological temperature (308 K), we observed no or only small coupling differences between POPE and POPG in the presence of any of the cationic peptides. However, around ambient temperature (293 K), at which gel- and liquid-crystalline phases coexist in the peptide-free POPE/POPG membrane, the peptides caused distinct quadrupolar couplings for the two lipids, indicating domain formation. The broad-spectrum antimicrobial peptide PG-1 ordered ∼40% of the POPE lipids while disordering POPG. The Gram-negative selective PG-1 mutant, IB549, caused even larger differences in the POPE and POPG disorder: ∼80% of POPE partitioned into the ordered phase, whereas all of the POPG remained in the disordered phase. In comparison, TAT rigidified POPE and POPG similarly in the binary membrane at ambient temperature, indicating that TAT does not cause dynamic heterogeneity but interacts with the membrane with a different mechanism. Penetratin maintained the POPE order but disordered POPG, suggesting moderate domain separation. These results provide insight into the extent of domain formation in bacterial membranes and the possible peptide structural requirements for this phenomenon.     

Interactions of oritavancin, a new semi-synthetic lipoglycopeptide, with lipids extracted from Staphylococcus aureus

Oritavancin, a lipoglycopeptide with marked bactericidal activity against vancomycin-resistant Staphylococcus aureus and enterococci, induces calcein release from CL:POPE and POPG:POPE liposomes, an effect enhanced by an increase in POPG:POPE ratio, and decreased when replacing POPG by DPPG (Domenech et al., Biochim Biophys Acta 2009; 1788:1832-40). Using vesicles prepared from lipids extracted from S. aureus, we showed that oritavancin induces holes, erosion of the edges, and decrease of the thickness of the supported lipid bilayers (atomic force microscopy; AFM). Oritavancin also induced an increase of membrane permeability (calcein release) on a time- and dose-dependent manner. These effects were probably related to the ability of the drug to bind to lipid bilayers as shown by 8-anilino-1- naphthalene sulfonic acid (ANS) assay. Interaction of oritavancin with phospholipids at the level of their glycerol backbone and hydrophobic domain was studied by monitoring changes of Laurdan excitation generalized polarization (GP_ex) and 1,6-diphenyl-1,3,5-hexatriene (DPH) fluorescence anisotropy upon temperature increase. Oritavancin increased GP_ex values and the transition temperature, indicating a more ordered structure at the level of the glycerol backbone. Oritavancin slightly decreased DPH fluorescence depolarization intensities, suggesting an increase in fluidity at the level of acyl chains. Together, our data confirm the interaction of oritavancin with lipids and the potential role of a rigidifying effect at the level of glycerol backbone for membrane permeabilization. This work shows how AFM and biophysical methods may help in characterizing drug-membrane interactions, and sheds further light on the mode of action of oritavancin.     

Deuterium NMR Study of the Effect of Ergosterol on POPE Membranes

We study the effect of ergosterol on the physical properties of 1-[²H₃₁]palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) multibilayers using deuterium nuclear magnetic resonance. NMR spectra were taken as a function of temperature and ergosterol concentration up to 70 mol %. The spectral first moments show that there is a dramatic difference in the ability of ergosterol to disorder the gel phase and to order the liquid-crystalline phase of POPE membranes, an unusual behavior among lipid/sterol systems studied up to now. Further investigation of the liquid-crystalline phase shows that ergosterol (erg) increases the chain order of POPE-d31, but that this effect saturates at 10 mol % ergosterol. This is in marked contrast to the effect of cholesterol (chol) on POPE membranes: the chain order of POPE increases with cholesterol to at least 45 mol %. Moreover, we found that at higher ergosterol concentrations (>40 mol %) ergosterol decreases the POPE-d31 chain order, which, to our knowledge, has not been directly observed in other lipid/sterol systems. The temperature-composition phase diagram is presented. Finally, at all ergosterol concentrations, the chain order of liquid-crystalline-phase POPE is much smaller than that of comparable POPE/chol membranes. This implies that there is no liquid-ordered phase behavior for POPE/erg membranes.     

Nonlamellar-Phase-Promoting Colipids Enhance Segregation of Palmitoyl Ceramide in Fluid Bilayers

Ceramide is an important intermediate in sphingolipid homeostasis. We examined how colipids, with negative intrinsic curvature and which may induce curvature stress in the bilayers, affected the segregation of palmitoyl ceramide (PCer). Such colipids include 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE), 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), and tetra-linoleoyl cardiolipin (CL). In 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) bilayers, PCer formed ordered, gel-like domains at concentrations above 10 mol% at 23°C, as evidenced by the change in the average lifetime of the trans-parinaric acid emission. When POPE or DOPE were included in the DOPC bilayer (at 20:80 or 40:60 POPE or DOPE to DOPC, by mol), the lateral segregation of PCer was facilitated in a concentration-dependent manner, and less PCer was required for the formation of the ordered ceramide-rich domains. Inclusion of CL in the DOPE bilayer (at 10:90 or 20:80 CL to PC, by mol) also caused a similar facilitation of the lateral segregation of PCer. The PCer-rich domains formed in the presence of POPE, DOPE, or CL in DOPC bilayers were slightly more thermostable (by 2–10°C) when compared to PCer-rich domains in DOPC-only bilayers. Nonlamellar phases were not present in bilayers in which the effects of POPE or DOPE on PCer segregation were the largest, as verified by ³¹P NMR. When palmitoyl sphingomyelin was added to the different bilayer compositions at 5 mol%, relative to the phospholipids, PCer segregated into gel domains at lower concentrations (2–3 mol% PCer), and the effect of POPE on PCer segregation was eliminated. We suggest that the effects of POPE, DOPE, and CL on PCer segregation was in part influenced by their effects on membrane curvature stress and in part because of unfavorable interactions with PCer due to their unsaturated acyl chains. These lipids are abundant in mitochondrial membranes and are likely to affect functional properties of saturated ceramides in them.     

Interactions of oritavancin, a new lipoglycopeptide derived from vancomycin, with phospholipid bilayers: Effect on membrane permeability and nanoscale lipid membrane organization

Antibiotics acting on bacterial membranes are receiving increasing attention because of widespread resistance to agents acting on other targets and of potentially improved bactericidal effects. Oritavancin is a amphiphilic derivative of vancomycin showing fast and extensive killing activities against multi-resistant (including vancomycin insusceptible) Gram-positive organisms with no marked toxicity towards eukaryotic cells. We have undertaken to characterize the interactions of oritavancin with phospholipid bilayers, using liposomes (LUV) and supported bilayers made of cardiolipin (CL) or phosphatidylglycerol (POPG) and phosphatidylethanolamine (POPE), all abundant in Gram-positive organisms. Changes in membrane permeability were followed by the release of calcein entrapped in liposomes at self-quenching concentrations, and changes in nanoscale lipid organization examined by Atomic Force Microscopy (AFM). Oritavancin caused a fast (< 5 min) and complete (> 95%) release of calcein from CL:POPE liposomes, and a slower but still substantial (50% in 60 min) release from POPG:POPE liposomes, which was (i) concentration-dependent (0-600 nM; [microbiologically meaningful concentrations]); (ii) enhanced by an increase in POPG:POPE ratio, and decreased when replacing POPG by DPPG. AFM of CL:POPE supported bilayers showed that oritavancin (84 nM) caused a remodeling of the lipid domains combined with a redisposition of the drug and degradation of the borders. In all the above studies, vancomycin was without a significant effect at 5.5 μM. Electrostatic interactions, together with lipid curvature, lipid polymorphism as well of fluidity play a critical role for the permeabilization of lipid bilayer and changes in lipid organization induced by oritavancin.     

Exploring membrane selectivity of the antimicrobial peptide KIGAKI using solid-state NMR spectroscopy

The designed antimicrobial peptide KIGAKIKIGAKIKIGAKI possesses enhanced membrane selectivity for bacterial lipids, such as phosphatidylethanolamine and phosphatidylglycerol. The perturbation of the bilayer by the peptide was first monitored using oriented bilayer samples on glass plates. The alignment of POPE/POPG model membranes with respect to the bilayer normal was severely altered at 4 mol% KIGAKI while the alignment of POPC bilayers was retained. The interaction mechanism between the peptide and POPE/POPG bilayers was investigated by carefully comparing three bilayer MLV samples (POPE bilayers, POPG bilayers, and POPE/POPG 4/1 bilayers). KIGAKI induces the formation of an isotropic phase for POPE/POPG bilayers, but only a slight change in the ³¹P NMR CSA line shape for both POPE and POPG bilayers, indicating the synergistic roles of POPE and POPG lipids in the disruption of the membrane structure by KIGAKI. ²H NMR powder spectra show no reduction of the lipid chain order for both POPG and POPE/POPG bilayers upon peptide incorporation, supporting the evidence that the peptide acts as a surface peptide. ³¹P longitudinal relaxation studies confirmed that different dynamic changes occurred upon interaction of the peptide with the three different lipid bilayers, indicating that the strong electrostatic interaction between the cationic peptide KIGAKI and anionic POPG lipids is not the only factor in determining the antimicrobial activity. Furthermore, ³¹P and ²H NMR powder spectra demonstrated a change in membrane characteristics upon mixing of POPE and POPG lipids. The interaction between different lipids, such as POPE and POPG, in the mixed bilayers may provide the molecular basis for the KIGAKI carpet mechanism in the permeation of the membrane.     

Interaction of the antimicrobial peptide pheromone Plantaricin A with model membranes: Implications for a novel mechanism of action

Plantaricin A (plA) is a 26-residue bacteria-produced peptide pheromone with membrane-permeabilizing antimicrobial activity. In this study the interaction of plA with membranes is shown to be highly dependent on the membrane lipid composition. PlA bound readily to zwitterionic 1-stearoyl-2-oleoyl-sn-glycero-3-phosphocholine (SOPC) monolayers and liposomes, yet without significantly penetrating into these membranes. The presence of cholesterol attenuated the intercalation of plA into SOPC monolayers. The association of plA to phosphatidylcholine was, however, sufficient to induce membrane permeabilization, with nanomolar concentrations of the peptide triggering dye leakage from SOPC liposomes. The addition of the negatively charged phospholipid, 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-rac-glycerol POPG (SOPC/POPG; molar ratio 8:2) enhanced the membrane penetration of the peptide, as revealed by (i) peptide-induced increment in the surface pressure of lipid monolayers, (ii) increase in diphenylhexatriene (DPH) emission anisotropy measured for bilayers, and (iii) fluorescence characteristics of the two Trps of plA in the presence of liposomes, measured as such as well as in the presence of different quenchers. Despite deeper intercalation of plA into the SOPC/POPG lipid bilayer, much less peptide-induced dye leakage was observed for these liposomes than for the SOPC liposomes. Further changes in the mode of interaction of plA with lipids were evident when also the zwitterionic phospholipid, 1-palmitoyl-2-oleoyl-sn-glycerol-3-phosphoethanolaminne (POPE) was present (SOPC/POPG/POPE, molar ratio 3:2:5), thus suggesting increase in membrane spontaneous negative curvature to affect the mode of association of this peptide with lipid bilayer. PlA induced more efficient aggregation of the SOPC/POPG and SOPC/POPG/POPE liposomes than of the SOPC liposomes, which could explain the attenuated peptide-induced dye leakage from the former liposomes. At micromolar concentrations, plA killed human leukemic T-cells by both necrosis and apoptosis. Interestingly, plA formed supramolecular protein-lipid amyloid-like fibers upon binding to negatively charged phospholipid-containing membranes, suggesting a possible mechanistic connection between fibril formation and the cytotoxicity of plA.     

Supported planar bilayers from hexagonal phases

In this work the presence of inverted hexagonal phases H_II of 1-palmitoy-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) and cardiolipin (CL) (0.8:0.2, mol/mol) in the presence of Ca²⁺ were observed via ³¹P-NMR spectroscopy. When suspensions of the same composition were extended onto mica, H_II phases transformed into structures which features are those of supported planar bilayers (SPBs). When characterized by atomic force microscopy (AFM), the SPBs revealed the existence of two laterally segregated domains (the interdomain height being ∼ 1 nm). Cytochrome c (cyt c), which binds preferentially to acidic phospholipids like CL, was used to demonstrate the nature of the domains. We used 1-anilinonaphtalen-8-sulfonate (ANS) to demonstrate that in the presence of cyt c, the fluorescence of ANS decreased significantly in lamellar phases. Conversely, the ANS binding to H_II phases was negligible. When cyt c was injected into AFM fluid imaging cells, where SPBs of POPE:CL had previously formed poorly defined structures, protein aggregates (∼ 100 nm diameter) were ostensibly observed only on the upper domains, which suggests not only that they are mainly formed by CL, but also provides evidence of bilayer formation from H_II phases. Furthermore, a model for the nanostructure of the SPBs is herein proposed.     

Thermodynamic and structural study of the main phospholipid components comprising the mitochondrial inner membrane

Cardiolipin (CL) is a phospholipid found in the energy-transducing membranes of bacteria and mitochondria and it is thought to be involved in relevant biological processes as apoptosis. In this work, the mixing properties of CL and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocoline (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) at the air-water interface, have been examined using the thermodynamic framework analysis of compression isotherms. Accordingly, the values of the Gibbs energy of mixing, the more stable monolayers assayed were: POPC:CL (0.6:0.4, mol:mol) and POPE:CL (0.8:0.2, mol:mol). The results reflect that attractive forces are the greatest contributors to the total interaction in these compositions. Supported planar bilayers (SPBs) with such compositions were examined using atomic force microscopy (AFM) at different temperatures. With the POPC:CL mixture, rounded and featureless SPBs were obtained at 4 °C and 24 °C. In contrast, the extension of the POPE:CL mixture revealed the existence of different lipid domains at 24 °C and 37 °C. Three lipid domains coexisted which can be distinguished by measuring the step height difference between the uncovered mica and the bilayer. While the low and intermediate domains were temperature dependent, the high domain was composition dependent. When cytochrome c (cyt c) was injected into the fluid cell, the protein showed a preferential adsorption onto the high domain of the POPC:CL. These results suggest that the high domain is mainly formed by CL.     

A coarse-grained approach to studying the interactions of the antimicrobial peptides aurein 1.2 and maculatin 1.1 with POPG/POPE lipid mixtures

In the present work we investigated the differential interactions of the antimicrobial peptides (AMPs) aurein 1.2 and maculatin 1.1 with a bilayer composed of a mixture of the lipids 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1′-rac-glycerol) (POPG) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE). We carried out molecular dynamics (MD) simulations using a coarse-grained approach within the MARTINI force field. The POPE/POPG mixture was used as a simple model of a bacterial (prokaryotic cell) membrane. The results were compared with our previous findings for structures of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), a representative lipid of mammalian cells. We started the simulations of the peptide–lipid system from two different initial conditions: peptides in water and peptides inside the hydrophobic core of the membrane, employing a pre-assembled lipid bilayer in both cases. Our results show similarities and differences regarding the molecular behavior of the peptides in POPE/POPG in comparison to their behavior in a POPC membrane. For instance, aurein 1.2 molecules can adopt similar pore-like structures on both POPG/POPE and POPC membranes, but the peptides are found deeper in the hydrophobic core in the former. Maculatin 1.1 molecules, in turn, achieve very similar structures in both kinds of bilayers: they have a strong tendency to form clusters and induce curvature. Therefore, the results of this study provide insight into the mechanisms of action of these two peptides in membrane leakage, which allows organisms to protect themselves against potentially harmful bacteria.

Open image in new window

Graphical Abstract Aurein pore structure (green) in a lipid bilayer composed by POPE (blue) and POPG (red) mixture. It is possible to see water beads (light blue) inside the pore.

     

A NOVEL ASSAY OF ACYL‐COA:DIACYLGLYCEROL ACYLTRANSFERASE ACTIVITY UTILIZING FLUORESCENT SUBSTRATE1

Common methods for assaying acyl‐CoA:diacylglycerol acyltransferase (DGAT) enzymatic activity rely upon radiolabeled substrates or product assay. We developed a novel assay that directly quantifies endogenous DGAT activity through the use of a fluorescently labeled substrate. We performed this assay with microsomal protein, 2‐(6‐(7‐nitrobenz‐2‐oxa‐1,3‐diazol‐4‐yl)amino)hexanoyl‐1‐hexadecanoyl‐sn‐glycero‐3‐diacylglycerol (NBD‐DAG), and oleoyl‐CoA substrates. DGAT activity was analyzed in three species of algae as well as rat liver. The protocol proved to be sensitive and reliable. This assay may be used to facilitate research in the areas of biodiesel, oilseed crops, and triacylglycerol‐related human pathologies.     

Binding of bovine seminal plasma protein BSP-A1/-A2 to model membranes: Lipid specificity and effect of the temperature

Bovine seminal plasma (BSP) contains a family of phospholipid-binding proteins. The affinity of the protein BSP-A1/-A2 for lipid membranes composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), and POPC containing 30% (mol/mol) 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) or cholesterol, has been investigated by the isothermal titration calorimetry (ITC). This study confirms the association of these proteins to lipid bilayers, and provides a direct characterization of this exothermic process, at 37 °C. The measurements indicate that the protein affinity for lipid bilayers is modulated by the lipid composition, the lipid/protein ratio, and the temperature. The saturation lipid/protein ratio was increased in the presence of cholesterol and, to a lesser extent, of phosphatidylethanolamine, suggesting that it is modulated by the lipid acyl chain order. For all the investigated systems, the binding of BSP-A1/-A2 could not be modeled using a simple partitioning of the proteins between the aqueous and lipid phases. The existence of "binding sites", and lipid phase separations is discussed. The decrease of temperature, from 37 to 10 °C, converts the exothermic association of the proteins to the POPC bilayers to an endothermic process. A complementary 1-D and 2-D infrared spectroscopy study excludes the thermal denaturation of BSP-A1/-A2 as a contributor in the temperature dependence of the protein affinity for lipid bilayers. The reported findings suggest that changes in the affinity of BSP-A1/-A2 for lipid bilayers could be involved in modulating the association of these proteins to sperm membranes as a function of space and time; this would consequently modulate the extent of lipid extraction, including cholesterol, at a given place and given time.     

Calculation of IR dichroic values and order parameters from molecular dynamics simulations and their application to structure determination of lipid bilayers

In polarized infrared (IR) absorption experiments, dichroic values are used to study the structure and orientation of lipid molecules. From computer simulations, we obtained angular distributions of IR transition moment (TM) orientations of the stretch vibrations of CH₂ groups of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholin (POPC) lipid bilayers in the gel (L ) and fluid (L ) phases. From these distributions, we calculated dichroic absorption values, as well as order parameters. We established a connection between the dichroic ratio R ^ATR , which is measured in IR-ATR setups, with the dichroic ratio D and the order parameter S _zz . The calculated values compare well with experimental results for the fluid phase. In addition, we computed angular distributions of transition moments with respect to the tail director orientation for the gel and the fluid phases. Only small differences were found between the distributions in the symmetric stretch orientation, the asymmetric stretch orientation, and the C-H bond orientation of CH₂ groups. The distributions of tail directors of POPC showed average tilts of 14.7° in the gel phase and 32.9° in the fluid phase. We developed a theory which makes it possible to calculate average tilt angles of tail directors in the gel phase from dichroic absorption values obtained from IR measurements for a wide range of lipids. Legendre coefficients were calculated from TM distributions. Order parameters, defined as the second Legendre polynomial, were found to closely approximate the TM distribution in lipid bilayers in the fluid phase.Abbreviations MD molecular dynamics - IR infrared - ATR attenuated total reflection - TM transition moment - POPC 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidyl-cholin - POPG 1-palmitoyl-2-oleoyl-sn-glycero-3-phos-phatidylglycerol - DPPC 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholin - NMR nuclear magnetic resonance