Covalent immobilization of acetylcholinesterase on a novel polyacrylic acid‐based nanofiber membrane

In this study, polyacrylic acid‐based nanofiber (NF) membrane was prepared via electrospinning method. Acetylcholinesterase (AChE) from Electrophorus electricus was covalently immobilized onto polyacrylic acid‐based NF membrane by demonstrating efficient enzyme immobilization, and immobilization capacity of polymer membranes was found to be 0.4 mg/g. The novel NF membrane was synthesized via thermally activated surface reconstruction, and activation with carbonyldiimidazole upon electrospinning. The morphology of the polyacrylic acid‐based membrane was investigated by scanning electron microscopy, Fourier Transform Infrared Spectroscopy, and thermogravimetric analysis. The effect of temperature and pH on enzyme activity was investigated and maxima activities for free and immobilized enzyme were observed at 30 and 35°C, and pH 7.4 and 8.0, respectively. The effect of 1 mM Mn²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Mg²⁺, Ca²⁺ ions on the stability of the immobilized AChE was also investigated. According to the Michaelis–Menten plot, AChE possessed a lower affinity to acetylthiocholine iodide after immobilization, and the Michaelis–Menten constant of immobilized and free AChE were found to be 0.5008 and 0.4733 mM, respectively. The immobilized AChE demonstrated satisfactory reusability, and even after 10 consecutive activity assay runs, AChE maintained ca. 87% of its initial activity. Free enzyme lost its activity completely within 60 days, while the immobilized enzyme retained approximately 70% of the initial activity under the same storage time. The favorable reusability of immobilized AChE enables the support to be employable to develop the AChE‐based biosensors.     

A new method for immobilization of acetylcholinesterase

A new method for immobilization of acetylcholinesterase (AChE) to alginate gel beads by activating the carbonyl groups of alginate using carbodiimide coupling agent has been successfully developed. Maximum reaction rate (V _max) and Michaelis–Menten constant (K _m) were determined for the free and binary immobilized enzyme. The effects of pH, temperature, storage stability, reuse number and thermal stability on the free and immobilized AChE were also investigated. For the free and binary immobilized enzyme on the Ca–alginate gel beads, optimum pH values were found to be 7 and 8, respectively. Optimum temperatures for the free and immobilized enzyme were observed to be 30 and 35 °C, respectively. Upon 60 days of storage the preserved activity of free and immobilized enzyme were found as 4 and 68%, respectively. In addition, reuse number, and thermal stability of the free AChE were increased by as a result of binary immobilization.     

Stability improvement of immobilized lactoperoxidase using polyaniline polymer

Enzyme engineering via immobilization techniques is perfectly compatible against the other chemical or biological approximate to improve enzyme functions and stability. In this study lactoperoxidase was immobilized onto polyaniline polymer activated with glutaraldehyde as a bifunctional agent, to improve enzyme properties. Polyaniline polymer was used due its unique physical and chemical properties to immobilize lactoperoxidase (LPO). The optimum activity of immobilized LPO was observed at pH 6 and 55?°C, which has been increased about 10?°C for the immobilized enzyme. The immobilized enzyme maintained absolutely active for 60?days whereas the native enzyme lost 80?% of its initial activity within this period of time. Moreover, the immobilized enzyme can be reused for several times without loss of activity. The kinetic parameter studies showed slight differences between free and immobilized enzymes. The K_m and K_m.app were calculated to be 0.6 and 0.4; also V_max and V_max.app were 1.3 and 0.9 respectively.     

Improving of Catalase Stability Properties by Encapsulation in Alginate/Fe3O4 Magnetic Composite Beads for Enzymatic Removal of H2O2

The aim of this study was enhancing of stability properties of catalase enzyme by encapsulation in alginate/nanomagnetic beads. Amounts of carrier (10–100 mg) and enzyme concentrations (0.25–1.5 mg/mL) were analyzed to optimize immobilization conditions. Also, the optimum temperature (25–50°C), optimum pH (3.0–8.0), kinetic parameters, thermal stability (20–70°C), pH stability (4.0–9.0) operational stability (0–390 min), and reusability were investigated for characterization of the immobilized catalase system. The optimum pH levels of both free and immobilized catalase were 7.0. At the thermal stability studies, the magnetic catalase beads protected 90% activity, while free catalase maintained only 10% activity at 70°C. The thermal profile of magnetic catalase beads was spread over a large area. Similarly, this system indicated the improving of the pH stability. The reusability, which is especially important for industrial applications, was also determined. Thus, the activity analysis was done 50 times in succession. Catalase encapsulated magnetic alginate beads protected 83% activity after 50 cycles.     

Optimization and evaluation of acetylcholine esterase immobilization on ceramic packing using response surface methodology

In the present attempt a method for the immobilization of acetylcholine esterase (AChE) was developed. In this method, the enzyme was immobilized onto a ceramic cylinder support using a sol–gel–multiwall carbon nanotube (MWCNT) composite. Response surface methodology (RSM) was used for the design and analysis of immobilization experiments. Quadratic mathematical model equations were derived for the prediction of enzyme activity. Then the effects on enzyme activity at 30, 40 and 50 min after process initiation of varying each of two parameters over five levels were investigated. These parameters were the AChE:MWCNT ratio (X₁), and AChE–MWCNT:sol–gel ratio (X₂). The optimum values of X₁ and X₂ for the immobilization of AChE on ceramic packing were found to be 1.07 and 0.43, respectively. Using these optimum parameters it was shown that enzyme immobilization with MWCNTs and sol–gel was more effective than immobilization with sol–gel or graphite and sol–gel. Scanning electron microscopic (SEM) images revealed a porous surface comprised of MWCNT–AChE encapsulated in sol–gel. Furthermore, the system was highly reproducible with standard deviations after three successive assays of 1.88%, 2.11% and 2.13% at 30, 40 and 50 min after process initiation, respectively.     

Immobilization of lipase onto a photo-crosslinked polymer network: Characterization and polymerization applications

Abstract

The recovery of activity of lipases immobilized onto a photo-crosslinked polymer network was 76.0% and 41.0% for entrapment and adsorption methods, respectively. Both entrapped and adsorbed immobilized enzymes were very stable, retaining more than 60% of their activity over the range of temperatures studied. Immobilization by either method protected their relative activities nearly 96% at 70°C. The optimum pH was 8.0 for immobilized enzymes and 6.0 for the free enzyme at 40°C, while the relative activities after storage at 0–4°C for 30 days were 98% and 75% using entrapment and adsorption methods, respectively. These results indicated that lipase immobilized by entrapment and adsorption not only had good activity recovery, but also remarkable stability, better reusability and application adaptability than free lipase. Also, it can be safely stated that, photo-crosslinked polymer network can be used as alternative supports for immobilization of lipase for enzymatic polymerization reactions. In the ring-opening polymerization of ?-caprolactone, polymerization rates were clearly affected as monomer conversions were 58% and 49% and the highest molecular weights (M_n) obtained were 7890 and 5600 gmol^{? 1} for entrapment and adsorption methods, respectively.     

Immobilization of acetylcholinesterase in nanofibrous PVA/BSA membranes by electrospinning

Electrospinning, a simple and versatile method to fabricate nanofibrous supports, has attracted continuous attention in the field of enzyme immobilization. In this study, acetylcholinesterase (AChE) has been successfully immobilized in PVA nanofibers via electrospinning of a mixture of AChE, BSA as an enzyme stabilizing additive and PVA. The maximum activity recovery of immobilized AChE was about 40%. In comparison with free enzyme, the immobilized AChE showed improved stability while retaining a considerable amount of activity at lower pH values. Moreover, the immobilized AChE retained >34% of its initial activity when stored at 30°C for 100 days and retained 70% of its initial activity after ten consecutive reactor batch cycles.     

Immobilization of d-glucose oxidase onto a hydrogen peroxide permselective membrane and application for an enzyme electrode

A hydrogen peroxide permselective membrane with asymmetric structure was prepared and d-glucose oxidase (EC 1.1.3.4) was immobilized onto the porous layer. The activity of the immobilized d-glucose oxidase membrane was 0.34 units cm^?2 and the activity yield was 6.8% of that of the native enzyme. Optimum pH, optimum temperature, pH stability and temperature stability were found to be pH 5.0, 30–40°C, pH 4.0–7.0 and below 55°C, respectively. The apparent Michaelis constant of the immobilized d-glucose oxidase membrane was 1.6 × 10^?3 mol l^?1 and that of free enzyme was 4.8 × 10^?2 mol l^?1. An enzyme electrode was constructed by combination of a hydrogen peroxide electrode with the immobilized d-glucose oxidase membrane. The enzyme electrode responded linearly to d-glucose over the concentration 0–1000 mg dl^?1 within 10 s. When the enzyme electrode was applied to the determination of d-glucose in human serum, within day precision (CV) was 1.29% for d-glucose concentration with a mean value of 106.8 mg dl^?1. The correlation coefficient between the enzyme electrode method and the conventional colorimetric method using a free enzyme was 0.984. The immobilized d-glucose oxidase membrane was sufficiently stable to perform 1000 assays (2 to 4 weeks operation) for the determination of d-glucose in human whole blood. The dried membrane retained 77% of its initial activity after storage at 4°C for 16 months.     

High stabilization of immobilized Rhizomucor miehei lipase by additional coating with hydrophilic crosslinked polymers: Poly-allylamine/Aldehyde–dextran

Immobilized enzymes have a very large surface region which is not in contact with the support surface and, thus, have potential as a target for novel stabilization strategies. In this paper, coating the surfaces of such enzymes with a highly hydrophilic and compact cross-linked poly-aminated polymer as a strategy to increase the thermal stability of the immobilized enzymes is proposed. In particular, Rhizomucor miehei lipase (RML) was immobilized by interfacial adsorption onto octyl-agarose and further coated with poly-allylamine (PAA), a polymer that is very rich in primary amino groups. Cross-linking of the PAA layer to coat the immobilized enzyme was carried out, in situ, by reaction with freshly oxidized dextran (aldehyde–dextran). The PAA layer only exerted moderate stabilizing effects (around 4-fold), but further cross-linking with aldehyde–dextran highly increased the stabilizing effects; the new derivative was 440-fold more stable than uncoated derivative at 55 °C and pH 7 and exhibited 6-fold more catalytic activity compared to the soluble enzyme used for immobilization. We hypothesize that the hydrophilicity of PAA reduces the exposure of internal hydrophobic pockets to the enzyme surface at high temperatures. Besides, the compactness of the polymer may reduce distortion of the enzyme surface during inactivation.     

Immobilization and characterization of lipase from an indigenous Bacillus aryabhattai SE3-PB isolated from lipid-rich wastewater

Abstract

Extracellular lipase from an indigenous Bacillus aryabhattai SE3-PB was immobilized in alginate beads by entrapment method. After optimization of immobilization conditions, maximum immobilization efficiencies of 77%?±?1.53% and 75.99%?±?3.49% were recorded at optimum concentrations of 2% (w/v) sodium alginate and 0.2?M calcium chloride, respectively, for the entrapped enzyme. Biochemical properties of both free and immobilized lipase revealed no change in the optimum temperature and pH of both enzyme preparations, with maximum activity attained at 60?°C and 9.5, respectively. In comparison to free lipase, the immobilized enzyme exhibited improved stability over the studied pH range (8.5–9.5) and temperature (55–65?°C) when incubated for 3?h. Furthermore, the immobilized lipase showed enhanced enzyme-substrate affinity and higher catalytic efficiency when compared to soluble enzyme. The entrapped enzyme was also found to be more stable, retaining 61.51% and 49.44% of its original activity after being stored for 30 days at 4?°C and 25?°C, respectively. In addition, the insolubilized enzyme exhibited good reusability with 18.46% relative activity after being repeatedly used for six times. These findings suggest the efficient and sustainable use of the developed immobilized lipase for various biotechnological applications.     

Soybean hull peroxidase immobilization on macroporous glycidyl methacrylates with different surface characteristics

Soybean hull peroxidase (SHP, E.C. 1.11.1.7) was immobilized by a glutaraldehyde and periodate method onto series of macroporous copolymers of glycidyl methacrylate (GMA) and ethylene glycol dimethacrylate (EGDMA), poly(GMA-co-EGDMA) with various surface characteristics and pore size diameters ranging from 44 to 200 nm. Glutaraldehyde immobilization method and poly(GMA-co-EGDMA) named SGE 20/12 with pore sizes of 120 nm gave immobilized enzyme with highest specific activity of 25 U/g. Deactivation studies showed that immobilization increased stability of SHP and that surface characteristics of the used copolymer had a major influence on a stability of immobilized enzyme at high temperatures and in an organic solvent. The highest thermostability was obtained using the copolymer SGE 20/12 with pore size of 120 nm, while the highest stability in dioxane had SHP immobilized onto copolymer SGE 10/4 with pore size of 44 nm. Immobilized SHP showed a wider pH optimum as compared to the native enzyme especially at alkaline pH values and 3.2 times increased K _m value for pyrogallol. After 6 cycles of repeated use in batch reactor, immobilized SHP retained 25 % of its original activity. Macroporous copolymers with different surface characteristics can be used for fine tuning of activity and stability of immobilized SHP to obtain a biocatalyst suitable for phenol oxidation or polymer synthesis in organic solvents.     

Immobilization and characterisation of a lipase from a new source, Bacillus sp. ITP-001

A new source of lipase from Bacillus sp. ITP-001 was immobilized by physical adsorption on the polymer poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV) in aqueous solution. The support and immobilized lipase were characterised, compared to the lyophilised lipase, with regard to the specific surface area, adsorption–desorption isotherms, pore volume (Vp) and size (dp) by nitrogen adsorption, differential scanning calorimetry, thermogravimetric analysis, chemical composition analysis, Fourier transform infrared spectroscopy and biochemical properties. The immobilized enzyme displayed a shift in optimum pH towards the acidic side with an optimum at pH 4.0, whereas the optimum pH for the free enzyme was at pH 7.0; the optimum temperature of activity was 80 and 37 °C for the free and immobilized enzyme, respectively. The inactivation rate constant for the immobilized enzyme at 37 °C was 0.0038 h^?1 and the half-life was 182.41 h. The kinetic parameters obtained for the immobilized enzyme gave a Michaelis–Menten constant (K _m) of 49.10 mM and a maximum reaction velocity (V _max) of 205.03 U/g. Furthermore, the reuse of the lipase immobilized by adsorption allowed us to observe that it could be reused for 10 successive cycles, duration of each cycle (1 h), maintaining 33 % of the initial activity.     

Application and characterization of magnetic chitosan microspheres for enhanced immobilization of cellulase

In this study, a unique carrier magnetic chitosan microspheres (MCTS) was simply synthesized by anchoring Fe₃O₄ onto chitosan for direct immobilization of cellulases cross-linked by gluteraldehye. The structure and morphology were characterized using FT-IR, TGA, VSM and SEM. The optimum immobilization conditions were investigated: immobilized pH 7.0, amount of enzyme 15?mL (0.1?mg/mL), immobilization temperature 30?°C, immobilization time 5?h. At optimum conditions, MCTS achieved maximum enzyme solid loading rate of 73.5?mg/g, while recovery of enzyme activity approached to 71.6%. In the recycle test, immobilized cellulases operated without significant loss in its initial performances after 3 cycles, which indicated that immobilized cellulases can be regenerated and reused. The immobilized enzyme has better values of thermal and storage stability than that of free enzyme. Therefore, MCTS may be considered as a candidate with potential value of application in large-scale operations for cellulases immobilization.     

Novel grafted agar disks for the covalent immobilization of β‐D‐galactosidase

Novel grafted agar disks were prepared for the covalent immobilization of β‐D‐galactosidase (β‐gal). The agar disks were activated through reacting with ethylenediamine or different molecular weights of Polyethyleneimine (PEI), followed by glutaraldehyde (GA). The modification of the agar gel and the binding of the enzyme were verified by Fourier Transform Infrared (FTIR) and elemental analysis. Moreover, the agar's activation process was optimized, and the amount of immobilized enzyme increased 3.44 folds, from 38.1 to 131.2 U/g gel, during the course of the optimization process. The immobilization of β‐gal onto the activated agar disks caused its optimum temperature to increase from 45°C to 45–55°C. The optimum pH of the enzyme was also shifted towards the acidic side (3.6–4.6) after its immobilization. Additionally, the Michaelis‐Menten constant (K_m) increased for the immobilized β‐gal as compared to its free counterpart whereas the maximum reaction rate (V_max) decreased. The immobilized enzyme was also shown to retain 92.99% of its initial activity after being used for 15 consecutive times. © 2015 Wiley Periodicals, Inc. Biopolymers 103: 675–684, 2015.     

Preparation and properties of immobilized amyloglucosidase

Amyloglucosidase was immobilized on a copolymer of methyl methacrylate and 2-dimethylaminoethyl methacrylate. The resulting immobilized amyloglucosidase has 19% of the soluble enzyme specific activity. The pH optimum of immobilized amyloglucosidase is shifted towards acidity by 1.9 units. The temperature optimum of immobilized enzyme is shifted upward by 5°C. The immobilized amyloglucosidase has the maximum stability at pH 4.6, whereas the soluble enzyme has maximum stability at pH 5.5. While soluble amyloglucosidase has a maximum thermal stability at 50°C, the stability of the immobilized amyloglucosidase steadily decreases with the increase in temperature.     

Characterization of molecular-sieve-bound inulinase

The enzyme inulinase (2,1-β-d-fructan fructanohydrolase, EC 3.2.1.7), prepared from Kluyveromyces marxianus has been immobilized using an inorganic solid support, molecular sieve 4A via the metal link method. The immobilized enzyme had around 22 units of inulinase activity per g of the support with retention of 72% of the original activity. The optimum protein to molecular sieve ratio for the maximum retention of inulinase activity was 9 mg/g molecular sieve. The properties of soluble and immobilized enzyme differed in many respects. The optimum pH of the enzyme shifted from 6 to 5 and the optimum temperature of enzyme activity changed from 50 to 55°C. K_m values were 6.7 mM for soluble enzyme and 10 mM for immobilized enzyme. The heat stability of the enzyme was improved by immobilization. Immobilized enzyme retained about 76% of the original activity after 40 days of storage at room temperature (30±2°C).     

Immobilization of soybean seed coat peroxidase on polyaniline: Synthesis optimization and catalytic properties

Soybean seed coat peroxidase (SBP) was immobilized on various polyaniline-based polymers (PANI), activated with glutaraldehyde. The most reduced polymer (PANIG₂) showed the highest immobilization capacity (8.2 mg SBP?g^?1 PANIG₂). The optimum pH for immobilization was 6.0 and the maximum retention was achieved after a 6-h reaction period. The efficiency of enzyme activity retention was 82%. When stored at 4°C, the immobilized enzyme retained 80% of its activity for 15 weeks as evidenced by tests performed at 2-week intervals. The immobilized SBP showed the same pH-activity profile as that of the free SBP for pyrogallol oxidation but the optimum temperature (55°C) was 10°C below that of the free enzyme. Kinetic analysis show that the K_m was conserved while the specific V_max dropped from 14.6 to 11.4 µmol min^?1 µg^?1, in agreement with the immobilization efficiency. Substrate specificity was practically the same for both enzymes. Immobilized SBP showed a greatly improved tolerance to different organic solvents; while free SBP lost around 90% of its activity at a 50% organic solvent concentration, immobilized SBP underwent only 30% inactivation at a concentration of 70% acetonitrile. Taking into account that immobilized HRP loses more than 40% of its activity at a 20% organic solvent concentration, immobilized SBP performed much better than its widely used counterpart HRP.     

Thermal stability of glucose oxidase and its admixtures with synthetic polymers

The thermal stability of glucose oxidase in solution was studied as a function of time and temperature between 37–60°C. As expected, the rate of thermal inactivation increased with temperature and at 60°C more than 80% of the enzyme's activity was lost after 0.5 hr incubation. Similar stability measurements on enzyme solutions containing water soluble synthetic polymers showed that several of the polymers significantly enhanced the thermal stability of glucose oxidase. Copolymers of vinyl acetate with either vinyl pyrrolidone or vinyl alcohol were found to be particularly effective. The molecular weight of the added polymers was found to be unimportant in the stabilization process but both polymer concentration and compositions were shown to be critical parameters.     

Covalent Immobilization of Alcohol Dehydrogenase (ADH2) from Haloferax volcanii: How to Maximize Activity and Optimize Performance of Halophilic Enzymes

Alcohol dehydrogenase from halophilic archaeon Haloferax volcanii (HvADH2) was successfully covalently immobilized on metal-derivatized epoxy Sepabeads. The immobilization conditions were optimized by investigating several parameters that affect the halophilic enzyme–support interaction. The highest immobilization efficiency (100 %) and retention activity (60 %) were achieved after 48 h of incubation of the enzyme with Ni-epoxy Sepabeads support in 100 mM Tris–HCl buffer, pH 8, containing 3 M KCl at 5 °C. No significant stabilization was observed after blocking the unreacted epoxy groups with commonly used hydrophilic agents. A significant increase in the stability of the immobilized enzyme was achieved by blocking the unreacted epoxy groups with ethylamine. The immobilization process increased the enzyme stability, thermal activity, and organic solvents tolerance when compared to its soluble counterpart, indicating that the immobilization enhances the structural and conformational stability. One step purification–immobilization of this enzyme has been carried out on metal chelate-epoxy Sepabeads, as an efficient method to obtain immobilized biocatalyst directly from bacterial extracts.     

Fiber entrapment of naringinase from Penicillium sp. and application to fruit juice debittering

Naringinase from Penicillium sp. was immobilized on cellulose triacetate by the fiber entrapment method. Although the optimum pH (3.7) and optimum temperature (55°C) of the fiber-entrapped enzyme were similar to those of the native form, the immobilized enzyme had better heat stability. Kinetic studies showed that the immobilized enzyme had higher K_m values than its native form. When this immobilized naringinase was successively used in a column reactor for the hydrolysis of ρ-nitrophenyl-α-l-rhamnoside or naringin in a simulated fruit juice system or grapefruit juice, the enzyme column could be operated with satisfactory stability. In addition, when the natural grapefruit juice was recycled through the column reactor, no column blocking or filtering action of the catalyst bed was observed.