Automated amino acid side-chain NMR assignment of proteins using <Superscript>13</Superscript>C- and <Superscript>15</Superscript>N-resolved 3D [<Superscript>1</Superscript>H,<Superscript>1</Superscript>H]-NOESY

ASCAN is a new algorithm for automatic sequence-specific NMR assignment of amino acid side-chains in proteins, which uses as input the primary structure of the protein, chemical shift lists of (1)H(N), (15)N, (13)C(alpha), (13)C(beta) and possibly (1)H(alpha) from the previous polypeptide backbone assignment, and one or several 3D (13)C- or (15)N-resolved [(1)H,(1)H]-NOESY spectra. ASCAN has also been laid out for the use of TOCSY-type data sets as supplementary input. The program assigns new resonances based on comparison of the NMR signals expected from the chemical structure with the experimentally observed NOESY peak patterns. The core parts of the algorithm are a procedure for generating expected peak positions, which is based on variable combinations of assigned and unassigned resonances that arise for the different amino acid types during the assignment procedure, and a corresponding set of acceptance criteria for assignments based on the NMR experiments used. Expected patterns of NOESY cross peaks involving unassigned resonances are generated using the list of previously assigned resonances, and tentative chemical shift values for the unassigned signals taken from the BMRB statistics for globular proteins. Use of this approach with the 101-amino acid residue protein FimD(25-125) resulted in 84% of the hydrogen atoms and their covalently bound heavy atoms being assigned with a correctness rate of 90%. Use of these side-chain assignments as input for automated NOE assignment and structure calculation with the ATNOS/CANDID/DYANA program suite yielded structure bundles of comparable quality, in terms of precision and accuracy of the atomic coordinates, as those of a reference structure determined with interactive assignment procedures. A rationale for the high quality of the ASCAN-based structure determination results from an analysis of the distribution of the assigned side chains, which revealed near-complete assignments in the core of the protein, with most of the incompletely assigned residues located at or near the protein surface.     

Automated combined assignment of NOESY spectra and three-dimensional protein structure determination

A procedure for automated protein structure determination is presented that is based on an iterative procedure during which the NOESY peak list assignment and the structure calculation are performed simultaneously. The input consists of a list of NOESY peak positions and a list of chemical shifts as obtained from sequence-specific resonance assignment. For the present applications of this approach the previously introduced NOAH routine was implemented in the distance geometry program DIANA. As an illustration, experimental 2D and 3D NOESY cross-peak lists of six proteins have been analyzed, for which complete sequence-specific ¹H assignments are available for the polypeptide backbone and the amino acid side chains. The automated method assigned 70–90% of all NOESY cross peaks, which is on average 10% less than with the interactive approach, and only between 0.8% and 2.4% of the automatically assigned peaks had a different assignment than in the corresponding manually assigned peak lists. The structures obtained with NOAH/DIANA are in close agreement with those from manually assigned peak lists, and with both approaches the residual constraint violations correspond to high-quality NMR structure determinations. Systematic comparisons of the bundles of conformers that represent corresponding automatically and interactively determined structures document the absence of significant bias in either approach, indicating that an important step has been made towards automation of structure determination from NMR spectra.     

SANE (Structure Assisted NOE Evaluation): An automated model-based approach for NOE assignment

A reliable automated approach for assignment of NOESY spectra would allow more rapid determination of protein structures by NMR. In this paper we describe a semi-automated procedure for complete NOESY assignment (SANE, Structure Assisted NOE Evaluation), coupled to an iterative procedure for NMR structure determination where the user is directly involved. Our method is similar to ARIA [Nilges et al. (1997) J. Mol. Biol., 269, 408–422], but is compatible with the molecular dynamics suites AMBER and DYANA. The method is ideal for systems where an initial model or crystal structure is available, but has also been used successfully for ab initio structure determination. Use of this semi-automated iterative approach assists in the identification of errors in the NOE assignments to short-cut the path to an NMR solution structure.     

RFAC,a program for automated NMR R-factor estimation

A computer program (RFAC) has been developed, which allows the automated estimation of residual indices (R-factors) for protein NMR structures and gives a reliable measure for the quality of the structures. The R-factor calculation is based on the comparison of experimental and simulated ¹H NOESY NMR spectra. The approach comprises an automatic peak picking and a Bayesian analysis of the data, followed by an automated structure based assignment of the NOESY spectra and the calculation of the R-factor. The major difference to previously published R-factor definitions is that we take the non-assigned experimental peaks into account as well. The number and the intensities of the non-assigned signals are an important measure for the quality of an NMR structure. It turns out that for different problems optimally adapted R-factors should be used which are defined in the paper. The program allows to compute a global R-factor, different R-factors for the intra residual NOEs, the inter residual NOEs, sequential NOEs, medium range NOEs and long range NOEs. Furthermore, R-factors can be calculated for various user defined parts of the molecule or it is possible to obtain a residue-by-residue R-factor. Another possibility is to sort the R-factors according to their corresponding distances. The summary of all these different R-factors should allow the user to judge the structure in detail. The new program has been successfully tested on two medium sized proteins, the cold shock protein (TmCsp) from Termotoga maritima and the histidine containing protein (HPr) from Staphylococcus carnosus. A comparison with a previously published R-factor definition shows that our approach is more sensitive to errors in the calculated structure.     

MONTE: An automated Monte Carlo based approach to nuclear magnetic resonance assignment of proteins

A general-purpose Monte Carlo assignment program has been developed to aid in the assignment of NMR resonances from proteins. By virtue of its flexible data requirements the program is capable of obtaining assignments of both heavily deuterated and fully protonated proteins. A wide variety of source data, such as inter-residue scalar connectivity, inter-residue dipolar (NOE) connectivity, and residue specific information, can be utilized in the assignment process. The program can also use known assignments from one form of a protein to facilitate the assignment of another form of the protein. This attribute is useful for assigning protein-ligand complexes when the assignments of the unliganded protein are known. The program can be also be used as an interactive research tool to assist in the choice of additional experimental data to facilitate completion of assignments. The assignment of a deuterated 45 kDa homodimeric Glutathione-S-transferase illustrates the principal features of the program.     

KUJIRA,a package of integrated modules for systematic and interactive analysis of NMR data directed to high-throughput NMR structure studies

The recent expansion of structural genomics has increased the demands for quick and accurate protein structure determination by NMR spectroscopy. The conventional strategy without an automated protocol can no longer satisfy the needs of high-throughput application to a large number of proteins, with each data set including many NMR spectra, chemical shifts, NOE assignments, and calculated structures. We have developed the new software KUJIRA, a package of integrated modules for the systematic and interactive analysis of NMR data, which is designed to reduce the tediousness of organizing and manipulating a large number of NMR data sets. In combination with CYANA, the program for automated NOE assignment and structure determination, we have established a robust and highly optimized strategy for comprehensive protein structure analysis. An application of KUJIRA in accordance with our new strategy was carried out by a non-expert in NMR structure analysis, demonstrating that the accurate assignment of the chemical shifts and a high-quality structure of a small protein can be completed in a few weeks. The high completeness of the chemical shift assignment and the NOE assignment achieved by the systematic analysis using KUJIRA and CYANA led, in practice, to increased reliability of the determined structure.     

Spectral fitting for signal assignment and structural analysis of uniformly <Superscript>13</Superscript>C-labeled solid proteins by simulated annealing based on chemical shifts and spin dynamics

We describe an approach for the signal assignment and structural analysis with a suite of two-dimensional (13)C-(13)C magic-angle-spinning solid-state NMR spectra of uniformly (13)C-labeled peptides and proteins. We directly fit the calculated spectra to experimental ones by simulated annealing in restrained molecular dynamics program CNS as a function of atomic coordinates. The spectra are calculated from the conformation dependent chemical shift obtained with SHIFTX and the cross-peak intensities computed for recoupled dipolar interactions. This method was applied to a membrane-bound 14-residue peptide, mastoparan-X. The obtained C', C(alpha) and C(beta) chemical shifts agreed with those reported previously at the precisions of 0.2, 0.7 and 0.4 ppm, respectively. This spectral fitting program also provides backbone dihedral angles with a precision of about 50 degrees from the spectra even with resonance overlaps. The restraints on the angles were improved by applying protein database program TALOS to the obtained chemical shifts. The peptide structure provided by these restraints was consistent with the reported structure at the backbone RMSD of about 1 A.     

Automated structure determination from NMR spectra

Automated methods for protein structure determination by NMR have increasingly gained acceptance and are now widely used for the automated assignment of distance restraints and the calculation of three-dimensional structures. This review gives an overview of the techniques for automated protein structure analysis by NMR, including both NOE-based approaches and methods relying on other experimental data such as residual dipolar couplings and chemical shifts, and presents the FLYA algorithm for the fully automated NMR structure determination of proteins that is suitable to substitute all manual spectra analysis and thus overcomes a major efficiency limitation of the NMR method for protein structure determination.     

Protein NMR structure determination with automated NOE assignment using the new software CANDID and the torsion angle dynamics algorithm DYANA

Combined automated NOE assignment and structure determination module (CANDID) is a new software for efficient NMR structure determination of proteins by automated assignment of the NOESY spectra. CANDID uses an iterative approach with multiple cycles of NOE cross-peak assignment and protein structure calculation using the fast DYANA torsion angle dynamics algorithm, so that the result from each CANDID cycle consists of exhaustive, possibly ambiguous NOE cross-peak assignments in all available spectra and a three-dimensional protein structure represented by a bundle of conformers. The input for the first CANDID cycle consists of the amino acid sequence, the chemical shift list from the sequence-specific resonance assignment, and listings of the cross-peak positions and volumes in one or several two, three or four-dimensional NOESY spectra. The input for the second and subsequent CANDID cycles contains the three-dimensional protein structure from the previous cycle, in addition to the complete input used for the first cycle. CANDID includes two new elements that make it robust with respect to the presence of artifacts in the input data, i.e. network-anchoring and constraint-combination, which have a key role in de novo protein structure determinations for the successful generation of the correct polypeptide fold by the first CANDID cycle. Network-anchoring makes use of the fact that any network of correct NOE cross-peak assignments forms a self-consistent set; the initial, chemical shift-based assignments for each individual NOE cross-peak are therefore weighted by the extent to which they can be embedded into the network formed by all other NOE cross-peak assignments. Constraint-combination reduces the deleterious impact of artifact NOE upper distance constraints in the input for a protein structure calculation by combining the assignments for two or several peaks into a single upper limit distance constraint, which lowers the probability that the presence of an artifact peak will influence the outcome of the structure calculation. CANDID test calculations were performed with NMR data sets of four proteins for which high-quality structures had previously been solved by interactive protocols, and they yielded comparable results to these reference structure determinations with regard to both the residual constraint violations, and the precision and accuracy of the atomic coordinates. The CANDID approach has further been validated by de novo NMR structure determinations of four additional proteins. The experience gained in these calculations shows that once nearly complete sequence-specific resonance assignments are available, the automated CANDID approach results in greatly enhanced efficiency of the NOESY spectral analysis. The fact that the correct fold is obtained in cycle 1 of a de novo structure calculation is the single most important advance achieved with CANDID, when compared with previously proposed automated NOESY assignment methods that do not use network-anchoring and constraint-combination.     

A high quality nuclear magnetic resonance solution structure of peptide deformylase from Escherichia coli: Application of an automated assignment strategy using GARANT

The NMR structure of the peptide deformylase (PDF) (1–150) from Escherichia coli, which is an essential enzyme that removes the formyl group from nascent polypeptides and represents a potential target for drug discovery, was determined using 15N/13C doubly labeled protein. Nearly completely automated assignment routines were employed to assign three-dimensional triple resonance, 15N-resolved and 13C-resolved NOESY spectra using the program GARANT. This assignment strategy, demonstrated on a 17 kDa protein, is a significant advance in the automation of NMR data assignment and structure determination that will accelerate future work. A total of 2302 conformational constraints were collected as input for the distance geometry program DYANA. After restrained energy minimization with the program X-PLOR the 20 best conformers characterize a high quality structure with an average of 0.43 Å for the root-mean-square deviation calculated from the backbone atoms N, C and C, and 0.81 Å for all heavy atoms of the individual conformers relative to the mean coordinates for residues 1 to 150. The globular fold of PDF contains two -helices comprising residues 25–40, 125–138, six -strands 57–60, 70–77, 85–88, 98–101, 105–111, 117–123 and one 310 helix comprising residues 49–51. The C-terminal helix contains the HEXXH motif positioning a zinc ligand in a similar fashion to other metalloproteases, with the third ligand being cysteine and the fourth presumably a water. The three-dimensional structure of PDF affords insight into the substrate recognition and specificity for N-formylated over N-acetylated substrates and is compared to other PDF structures.     

Efficient analysis of protein 2D NMR spectra using the software packageEASY

Summary The programEASY supports the spectral analysis of biomacromolecular two-dimensional (2D) nuclear magnetic resonance (NMR) data. It provides a user-friendly, window-based environment in which to view spectra for interactive interpretation. In addition, it includes a number of automated routines for peakpicking, spin-system identification, sequential resonance assignment in polypeptide chains, and cross peak integration. In this uniform environment, all resulting parameter lists can be recorded on disk, so that the paper plots and handwritten notes which normally accompany manual assignment of spectra can be largely eliminated. For example, in a protein structure determination by 2D¹H NMR,EASY accepts the frequency domain datasets as input, and after combined use of the automated and interactive routines it can yield a listing of conformational constraints in the format required as input for the calculation of the 3D structure. The program was extensively tested with current protein structure determinations in our laboratory. In this paper, its main features are illustrated with data on the protein basic pancreatic trypsin inhibitor.     

Computer-assisted assignment of 2D1H NMR spectra of proteins: Basic algorithms and application to phoratoxin B

Summary A suite of computer programs (CLAIRE) is described which can be of assistance in the process of assigning 2D¹H NMR spectra of proteins. The programs embody a software implementation of the sequential assignment approach first developed by Wüthrich and co-workers (K. Wüthrich. G. Wider, G. Wagner and W. Braun (1982)J. Mol. Biol. 155, 311). After data-abstraction (peakpicking), the software can be used to detect patterns (spin systems), to find cross peaks between patterns in 2D NOE data sets and to generate assignments that are consistent with all available data and which satisfy a number of constraints imposed by the user. An interactive graphics program calledCONPAT is used to control the entire assignment process as well as to provide the essential feedback from the experimental NMR spectra. The algorithms are described in detail and the approach is demonstrated on a set of spectra from the mistletoe protein phoratoxin B, a homolog of crambin. The results obtained compare well with those reported earlier based entirely on a manual assignment process.     

Protein NMR structure determination with automated NOE-identification in the NOESY spectra using the new software ATNOS

Novel algorithms are presented for automated NOESY peak picking and NOE signal identification in homonuclear 2D and heteronuclear-resolved 3D [¹H,¹H]-NOESY spectra during de novoprotein structure determination by NMR, which have been implemented in the new software ATNOS (automated NOESY peak picking). The input for ATNOS consists of the amino acid sequence of the protein, chemical shift lists from the sequence-specific resonance assignment, and one or several 2D or 3D NOESY spectra. In the present implementation, ATNOS performs multiple cycles of NOE peak identification in concert with automated NOE assignment with the software CANDID and protein structure calculation with the program DYANA. In the second and subsequent cycles, the intermediate protein structures are used as an additional guide for the interpretation of the NOESY spectra. By incorporating the analysis of the raw NMR data into the process of automated de novoprotein NMR structure determination, ATNOS enables direct feedback between the protein structure, the NOE assignments and the experimental NOESY spectra. The main elements of the algorithms for NOESY spectral analysis are techniques for local baseline correction and evaluation of local noise level amplitudes, automated determination of spectrum-specific threshold parameters, the use of symmetry relations, and the inclusion of the chemical shift information and the intermediate protein structures in the process of distinguishing between NOE peaks and artifacts. The ATNOS procedure has been validated with experimental NMR data sets of three proteins, for which high-quality NMR structures had previously been obtained by interactive interpretation of the NOESY spectra. The ATNOS-based structures coincide closely with those obtained with interactive peak picking. Overall, we present the algorithms used in this paper as a further important step towards objective and efficient de novoprotein structure determination by NMR.     

Computer-assisted assignment of multidimensional NMR spectra of proteins: Application to 3D NOESY-HMQC and TOCSY-HMQC spectra

Summary An algorithm based on the technique of combinatorial minimization is used for the semi-automated assignment of multidimensional heteronuclear spectra. The program (ALFA) produces the best assignment compatible with the available input data. Even partially misleading or missing data do not seriously corrupt the final assignment. Ambiguous sequences of the possible assignment and all alternatives are indicated. The program can also use additional non-spectroscopic data to assist in the assignment procedure. For example, information from the X-ray structure of the protein and/or information about the secondary structure can be used. The assignment procedure was tested on spectra of mucous trypsin inhibitor, a protein of 107 residues.     

Computer assignment of the backbone resonances of labelled proteins using two-dimensional correlation experiments

Summary We present ALPS (Assignment for Labelled Protein Spectra), a flexible computer program for the automatic assignment of backbone NMR resonances of ¹⁵N/¹³C-labelled proteins. The program constructs pseudoresidues from peak-picking lists of a set of two-dimensional triple resonance experiments and uses either a systematic search or a simulated annealing-based optimization to perform the assignment. This method has been successfully tested on two-dimensional triple resonance spectra of Rhodobacter capsulatus ferrocytochrome c ₂ (116 amino acids).     

Improved simulation of NOESY spectra by RELAX-JT2 including effects of J-coupling, transverse relaxation and chemical shift anisotropy

RELAX-JT2 is an extension of RELAX, a program for the simulation of 1H 2D NOESY spectra and (15)N or (13)C edited 3D NOESY-HSQC spectra of biological macromolecules. In addition to the already existing NOE-simulation it allows the proper simulation of line shapes by the integrated calculation of T(2) times and multiplet structures caused by J-couplings. Additionally the effects of relaxation mediated by chemical shift anisotropy are taken into account. The new routines have been implemented in the program AUREMOL, which aims at the automated NMR structure determination of proteins in solution. For a manual or automatic assignment of experimental spectra that is based on the comparison with the corresponding simulated spectra, the additional line shape information now available is a valuable aid. The new features have been successfully tested with the histidine-containing phosphocarrier protein HPr from Staphylococcus carnosus.     

MOTOR: Model assisted software for NMR structure determination

Eukaryotic proteins with important biological function can be partially unstructured, conformational flexible, or heterogenic. Crystallization trials often fail for such proteins. In NMR spectroscopy, parts of the polypeptide chain undergoing dynamics in unfavorable time regimes cannot be observed. De novo NMR structure determination is seriously hampered when missing signals lead to an incomplete chemical shift assignment resulting in an information content of the NOE data insufficient to determine the structure ab initio. We developed a new protein structure determination strategy for such cases based on a novel NOE assignment strategy utilizing a number of model structures but no explicit reference structure as it is used for bootstrapping like algorithms. The software distinguishes in detail between consistent and mutually exclusive pairs of possible NOE assignments on the basis of different precision levels of measured chemical shifts searching for a set of maximum number of consistent NOE assignments in agreement with 3D space. Validation of the method using the structure of the low molecular‐weight‐protein tyrosine phosphatase A (MptpA) showed robust results utilizing protein structures with 30–45% sequence identity and 70% of the chemical shift assignments. About 60% of the resonance assignments are sufficient to identify those structural models with highest conformational similarity to the real structure. The software was benchmarked by de novo solution structures of fibroblast growth factor 21 (FGF21) and the extracellular fibroblast growth factor receptor domain FGFR4 D2, which both failed in crystallization trials and in classical NMR structure determination. Proteins 2013; 81:2007–2022. © 2013 Wiley Periodicals, Inc.