Surface modification of nanofibrous poly(acrylonitrile-co-acrylic acid) membrane with biomacromolecules for lipase immobilization

In this work, poly(acrylonitrile-co-acrylic acid) (PANCAA) was electrospun into nanofibers with a mean diameter of 180 nm. To create a biofriendly microenvironment for enzyme immobilization, collagen or protein hydrolysate from egg skin (ES) was respectively tethered on the prepared nanofibrous membranes in the presence of 1-ethyl-3-(dimethyl-aminopropyl) carbodiamine (EDC)/N-hydroxyl succinimide (NHS). Confocal laser scanning microscopy (CLSM) was used to verify the surface modification and protein density on the nanofibrous membranes. Lipase from Candida rugosa was then immobilized on the protein-modified nanofibrous membranes by covalent binding using glutaraldehyde (GA) as coupling agent, and on the nascent PANCAA nanofibrous membrane using EDC/NHS as coupling agent, respectively. The properties of the immobilized enzyme were assayed. It was found that different pre-tethered biomacromolecules had distinct effects on the immobilized enzyme. The activity retention of the immobilized lipase on ES hydrolysate-modified nanofibrous membrane increased from 15.0% to 20.4% compared with that on the nascent one, while it was enhanced up to more than quadrupled (activity retention of 61.7%) on the collagen-modified nanofibrous membrane. The kinetic parameter, K_m and V_max, were also determined for the free and immobilized lipases. Furthermore, the stabilities of the immobilized lipases were obviously improved compared with the free one.     

A simple approach to constructing antibacterial and anti-biofouling nanofibrous membranes

In this work, antibacterial and anti-adhesive polymeric thin films were constructed on polyacrylonitrile (PAN) nanofibrous membranes in order to extend their applications. Polyhexamethylene guanidine hydrochloride (PHGH) as an antibacterial agent and heparin (HP) as an anti-adhesive agent have been successfully coated onto the membranes via a layer-by-layer (LBL) assembly technique confirmed by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), energy-dispersive spectroscopy (EDS) and scanning electron microscopy (SEM). The antibacterial properties of LBL-functionalized PAN nanofibrous membranes were evaluated using the Gram-positive bacterium Staphylococcus aureus and the Gram-negative Escherichia coli. Furthermore, the dependence of the antibacterial activity and anti-biofouling performance on the number of layers in the LBL films was investigated quantitatively. It was found that these LBL-modified nanofibrous membranes possessed high antibacterial activities, easy-cleaning properties and stability under physiological conditions, thus qualifying them as candidates for anti-biofouling coatings.     

LBL fabricated biopolymer-layered silicate based nanofibrous mats and their cell compatibility studies

N-(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride (HTCC) was synthesized from chitosan (CS). Organic rectorite (OREC) added into cellulose acetate (CA) was used to fabricate electrospun nanofibrous mats with improved thermal properties, as a result of depositing multilayers of the positively charged HTCC-OREC composites and the negatively charged sodium alginate (ALG) via layer-by-layer (LBL) technique. The morphology was affected by the number of deposition bilayers and the component of the outmost layer. Observed from the field emission scanning electron microscopy (FE-SEM) images, the LBL structured nanofibrous mats had much larger fiber sizes than CA-OREC nanofibrous mats. X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) results further confirmed that HTCC-OREC was assembled on nanofibrous mats. Additionally, cell experiments and MTT results demonstrated that OREC had little effect on the cytotoxicity of LBL template, but obviously affected both the cytotoxicity and the cell compatibility of LBL structured mats when OREC was in the deposition films.     

Covalent immobilization of redox enzyme on electrospun nonwoven poly(acrylonitrile-co-acrylic acid) nanofiber mesh filled with carbon nanotubes: a comprehensive study

In this work, novel conductive composite nanofiber mesh possessing reactive groups was electrospun from solutions containing poly(acrylonitrile-co-acrylic acid) (PANCAA) and multi-walled carbon nanotubes (MWCNTs) for redoxase immobilization, assuming that the incorporated MWCNTs could behave as electrons transferor during enzyme catalysis. The covalent immobilization of catalase from bovine liver on the neat PANCAA nanofiber mesh or the composite one was processed in the presence of EDC/NHS. Results indicated that both the amount and activity retention of bound catalase on the composite nanofiber mesh were higher than those on the neat PANCAA nanofiber mesh, and the activity increased up to 42%. Kinetic parameters, K(m) and V(max), for the catalases immobilized on the composite nanofiber mesh were lower and higher than those on the neat one, respectively. This enhanced activity might be ascribed to either promoted electron transfer through charge-transfer complexes and the pi system of carbon nanotubes or rendered biocompatibility by modified MWCNTs. Furthermore, the immobilized catalases revealed much more stability after MWCNTs were incorporated into the polymer nanofiber mesh. However, there was no significant difference in optimum pH value and temperature, thermal stability and operational stability between these two immobilized preparations, while the two ones appeared more advantageous than the free in these properties. The effect of MWCNTs incorporation on another redox enzyme, peroxidase, was also studied and it was found that the activity increased by 68% in comparison of composite one with neat preparation.     

A novel and highly sensitive acetyl-cholinesterase biosensor modified with hollow gold nanospheres

In this work, a highly sensitive acetylcholinesterase (AChE) inhibition-based amperometric biosensor has been developed. Firstly, a glassy carbon electrode (GCE) was modified with chitosan (Chits). Then, hollow gold nanospheres (HGNs) were absorbed onto the surface of chitosan based on the strong affinity through electrostatic adsorption. After that, l-cysteine (l-cys) was assembled on HGNs through Au–S bond. The hollow gold nanospheres were prepared by using Co nanoparticles as sacrificial templates and characterized by scanning electron microscopy, transmission electron microscopy and ultraviolet spectra, respectively. Finally, AChE was immobilized with covalent binding via –COOH groups of l-cysteine onto the modified GCE. The AChE biosensor fabrication process was characterized by cyclic voltammetry and electrochemical impedance spectroscopy methods with the use of ferricyanide as an electrochemical redox indicator. Under optimum conditions, the inhibition rates of pesticides were proportional to their concentrations in the range of 0.1–150 and 0.1–200 μg L^?1 for chlorpyrifos and carbofuran, respectively, the detection limits were 0.06 μg L^?1 for chlorpyrifos and 0.08 μg L^?1 for carbofuran. Moreover, the biosensor exhibited a good stability and reproducibility and was suitable for trace detection of pesticide residues in vegetables and fruits.     

A three-step purification of human alpha 1-acid glycoprotein

alpha 1-Acid glycoprotein (AGP) was purified to homogeneity by a 3-step procedure using pseudo-ligand affinity chromatography on immobilized Cibacron blue F3GA, Procion red HE3B, and preparative column isoelectric focusing. The overall yield of the combined techniques was 88%. Analysis of the purified AGP by lectin affinity chromatography on immobilized Con A and immunoaffino-electrophoresis indicated that the most acidic form did not interact with the lectin, while the two more basic fractions possessed different affinities for Con A. In addition, 3 different populations of AGP were clearly separated by Con A affinity chromatography.     

Specific isolation of surface glycoproteins from intact cells by biotinylated concanavalin A and immobilized streptavidin

An indirect affinity chromatography procedure utilizing biotinylated lectins and designed for the specific isolation of surface glycoproteins is described. The method is illustrated with intact acute leukemic lymphoblastic cells (ALL cells) with biotin-epsilon-aminocaproyl-concanavalin A (biocap-Con A) and streptavidin-Sepharose 4B. Biocap-Con A, containing on average 27 biotin residues per tetrameric lectin molecule, is used to isolate Con A-binding glycoproteins from the surface of [35S]methionine-radiolabeled intact cells. The biocap-Con A/glycoprotein complexes, after solubilization in detergent, are retrieved on immobilized streptavidin. The surface glycoproteins isolated from intact ALL cells by this method are subjected to two-dimensional gel electrophoresis and detected by autoradiography. More than fifty Con A-binding glycoproteins can be separated from the ALL cells. These glycoproteins retrievable from the cell surface were compared to those retrieved by the indirect affinity chromatography procedure from isolated plasma membrane fractions. Certain groups of glycoproteins present in the fraction isolated from intact cells were not detected in that from the plasma membrane preparations. The advantage of using the biocap-con A/streptavidin system with intact cells rather than isolated plasma membranes for the detection of surface glycoproteins is discussed.     

Dual properties of the deacetylated sites in chitosan for molecular immobilization and biofunctional effects

Polypropylene nonwoven fabric was surface-activated by high-density oxygen microwave plasma, followed by graft copolymerization with acrylic acid (AAc) and then coupling with chitosan molecules. The pAAc-grafted surface containing C=O in carboxylic acid exhibited a hydrophilic character capable of promoting water absorbency. A larger portion of minimum 85% deacetylated sites in chitosan molecules was then coupled with the grafted pAAc (around 149 microg.cm(-2)) by forming amide bonds at their interface. The covalently bonded chitosan was weighted around 44 microg.cm(-2). The smaller portion of the deacetylated sites demonstrated a distinctive structure as polycations, i.e., NH(3)(+), on the immobilized chitosan. The respective structures following sequential reactions were identified using Fourier transform infrared-attenuated total reflection and X-ray photoelectron spectroscopy with peaks deconvolution. The NH(3)(+) sites on the immobilized chitosan exhibited biofunctional in anticoagulation and in antibacterial property. Blood cells agglutination or agglomeration upon the chitosan-immobilized surface, in particular for red blood cells and platelets, resulted from hydrophilic effect derived from the grafted pAAc and the chitosan itself, and ionic attractions between polycations and blood cells. In addition, the agglutinated cells retained their original morphologies. It is therefore very promising to apply this durable chitosan-immobilized surface for making an antibacterial support, at the same time, for retaining blood cell affinity.     

Preparation of chitosan-nylon-6 blended membranes containing silver ions as antibacterial materials

Chitosan-nylon-6 blended membranes were prepared by combining solvent evaporation and a phase inversion technique, and then used to chelate silver ions. Gram-positive bacteria (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli) were used to study the antibacterial properties of the membranes. Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) indicated hydrogen-bond interactions between chitosan and nylon-6. From the scanning electron microscopy (SEM) pictures, it was observed that with the increase of nylon-6 content, the blended membrane gradually became a material with porous morphology. After chelating silver ions, the tensile strength of the membranes increased. The antibacterial activity with the variation of chitosan content, the pH value and the concentration of the silver nitrate solution used to prepare Ag(+)-loaded membranes were investigated systematically. The results indicated that the chitosan-nylon-6 blended membranes with Ag(+) were antibacterial to both Gram-positive bacteria and Gram-negative bacteria. The antibacterial activity improved with the increased chitosan content due to the larger amount of silver ions loaded. The antibacterial property of the chitosan-nylon-6 blended membranes could be primarily attributed to the content of chitosan and silver ions as well as the surface morphology of the membranes.     

Evaluation of two different Concanavalin A affinity adsorbents for the adsorption of glucose oxidase

Concanavalin A (Con A) was selected as ligand and thus immobilized onto two different supports, namely the polymeric Toyopearl and the inorganic silica, with the protection of its binding sites provided during the coupling procedure. The prepared Con A affinity adsorbents were then employed to evaluate their adsorption behaviour for the enzyme glucose oxidase (GOD). The immobilization kinetics showed that the immobilization of Con A on silica supports was much faster than that on Toyopearl supports, which could highly reduce the possibility of the denaturation of Con A. The optimal adsorption conditions for binding of GOD onto the ligand were determined in terms of the pH value and the ionic strength of the adsorption medium. The adsorption isotherms for binding GOD onto two Con A affinity adsorbents fitted well with the Langmuir equation. The maximum adsorption capacity q(m) of Toyopearl Con A and silica Con A were 7.9 mg/ml and 4.9 mg/ml, with a dissociation constant K(d) of 4.8 x 10(-7)M and 2.6 x 10(-6)M, respectively. Due to the less diffusive resistance, silica Con A showed both higher adsorption and desorption rates for GOD when compared with Toyopearl Con A. The nonspecific adsorption of GOD was less than 8% for both end-capped Toyopearl and silica supports. The dynamic adsorption of GOD for five times repeated processes showed a high stability for both prepared adsorbents. All the results indicate a good suitability of both Con A adsorbents for affinity adsorption of GOD.     

Synthesis and characterization of chitosan/ZnO nanoparticle composite membranes

Novel chitosan/ZnO nanoparticle (CS/nano-ZnO) composite membranes were prepared via the method of sol-cast transformation and studied by UV-vis absorption spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray fluorescence spectrometry (EDX). The characterization revealed that ZnO nanoparticles dispersed homogeneously within the chitosan matrix. The mechanical and antibacterial properties of the product were investigated. The results showed that the ZnO content had an effect on the mechanical properties of CS/nano-ZnO composite membranes, and that the antibacterial activities of CS membranes for Bacillus subtilis, Escherichia coli, and Staphylococcus aureus were enhanced by the incorporation of ZnO. Further, CS/nano-ZnO composite membranes with 6-10 wt % ZnO exhibited high antibacterial activities.     

Preparation and Characterization of Chitosan Hybrid Membranes Containing Polyethylacrylate and Polybutylacrylate

Chitosan hybrid membranes were prepared in the presence of polyethylacrylate and polybutylacrylate and characterized by measuring stress, strain, Young’s modulus, swelling behavior and antibacterial properties against gram-negative and gram-positive bacteria using IR spectroscopy and scanning electron microscopy (SEM). The results show that the mechanical properties of the hybrid membranes were enhanced using polybutylacrylate. SEM images showed homogeneity of the prepared membranes. The swelling degree was of the order chitosan > chitosan/polyethylacrylate > chitosan/polybutylacrylate. Antibacterial properties of the hybrid membranes with polybutylacrylate and polyethylacrylate were higher than those of chitosan membranes without any additives.     

Poly(N-isopropylacrylamide) surface-grafted chitosan membranes as a new substrate for cell sheet engineering and manipulation

The immobilization of poly(N-isopropylacrylamide) (PNIPAAm) on chitosan membranes was performed in order to render membranes with thermo-responsive surface properties. The aim was to create membranes suitable for cell culture and in which confluent cell sheets can be recovered by simply lowering the temperature. The chitosan membranes were immersed in a solution of the monomer that was polymerized via radical initiation. The composition of the polymerization reaction solvent, which was a mixture of a chitosan non-solvent (isopropanol) and a solvent (water), provided a tight control over the chitosan membranes swelling capability. The different swelling ratio, obtained at different solvent composition of the reaction mixture, drives simultaneously the monomer solubility and diffusion into the polymeric matrix, the polymerization reaction rate, as well as the eventual chain transfer to the side substituents of the pyranosyl groups of chitosan. A combined analysis of the modified membranes chemistry by proton nuclear magnetic resonance ((1)H-NMR), Fourier transform spectroscopy with attenuated total reflection (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS) showed that it was possible to control the chitosan modification yield and depth in the solvent composition range between 75% and 100% of isopropanol. Plasma treatment was also applied to the original chitosan membranes in order to improve cell adhesion and proliferation. Chitosan membranes, which had been previously subjected to oxygen plasma treatment, were then modified by means of the previously described methodology. A human fetal lung fibroblast cell line was cultured until confluence on the plasma-treated thermo-responsive chitosan membranes and cell sheets were harvested lowering the temperature.     

Effect of the Support Size on the Properties of β-Galactosidase Immobilized on Chitosan: Advantages and Disadvantages of Macro and Nanoparticles

The effect of the support size on the properties of enzyme immobilization was investigated by using chitosan macroparticles and nanoparticles. They were prepared by precipitation and ionotropic gelation, respectively, and were characterized by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), transmission electron microscopy (TEM), light scattering analysis (LSA), and N(2) adsorption-desorption isotherms. β-Galactosidase was used as a model enzyme. It was found that the different sizes and porosities of the particles modify the enzymatic load, activity, and thermal stability of the immobilized biocatalysts. The highest activity was shown by the enzyme immobilized on nanoparticles when 204.2 mg protein·(g dry support)(-1) were attached. On the other hand, the same biocatalysts presented lower thermal stability than macroparticles. β-Galactosidase immobilized on chitosan macro and nanoparticles exhibited excellent operational stability at 37 °C, because it was still able to hydrolyze 83.2 and 75.93% of lactose, respectively, after 50 cycles of reuse.     

Carboxymethyl chitin/organic rectorite composites based nanofibrous mats and their cell compatibility

In this study, carboxymethyl chitin (CMC) - organic rectorite (OREC)/poly (vinyl alcohol) (PVA) composite nanofibrous mats were successfully prepared via electrospinning. SAXRD pattern showed that the interlayer distance of OREC was increased from 3.68 to 4.08nm, which verified that polymer chains were intercalated into the interlayer of OREC. Field emission scanning electron microscopy, Fourier transform infrared spectra and energy-dispersive X-ray spectroscopy were used to characterize the morphology and microcosmic structure of nanofibrous mats. Thermal properties of mats were determined by differential scanning calorimetry. To evaluate the cell compatibility of mats, mouse lung fibroblast (L929) was chosen for cell attachment and spreading assay. The results shows that nanofibrous mats contained OREC have better thermal properties. Besides, the addition of OREC has little effect on the cell compatibility of nanofibrous mats.     

Poly(acrylonitrile)chitosan composite membranes for urease immobilization

(Poly)acrylonitrile/chitosan (PANCHI) composite membranes were prepared. The chitosan layer was deposited on the surface as well as on the pore walls of the base membrane. This resulted in the reduction of the pore size of the membrane and in an increase of their hydrophilicity. The pore structure of PAN and PANCHI membranes were determined by TEM and SEM analyses. It was found that the average size of the pore under a selective layer base PAN membrane is 7 microm, while the membrane coated with 0.25% chitosan shows a reduced pore size--small or equal to 5 microm and with 0.35% chitosan--about 4 microm. The amounts of the functional groups, the degree of hydrophilicity and transport characteristics of PAN/Chitosan composite membranes were determined. Urease was covalently immobilized onto all kinds of PAN/chitosan composite membranes using glutaraldehyde. Both the amount of bound protein and relative activity of immobilized urease were measured. The highest activity (94%) was measured for urease bound to PANCHI2 membranes (0.25% chitosan). The basic characteristics (pH(opt), pH(stability), T(opt), T(stability), heat inactivation and storage stability) of immobilized urease were determined. The obtained results show that the poly(acrylonitrile)chitosan composite membranes are suitable for enzyme immobilization.     

Electrospun poly(lactic acid)/chitosan core-shell structure nanofibers from homogeneous solution

The core-shell structure nanofibers of poly(lactic acid)/chitosan with different weight ratios were successfully electrospun from homogeneous solution. The preparation process was more simple and effective than double-needle electrospinning. The nanofibers were obtained with chitosan in shell while poly(lactic acid) in core attributing to phase separation, which were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and energy dispersive spectrometer (EDS). The electrospun nanofibrous membrane was evaluated in vitro by using mouse fibroblasts (L929) as reference cell lines. Cell culture results indicated that these materials were good in promoting cell growth and attachment, thus they could be used for tissue engineering and wound healing dressing.     

Surface functionalized electrospun biodegradable nanofibers for immobilization of bioactive molecules

A blend mixture of biodegradable poly(epsilon-caprolactone) (PCL) and poly(d,l-lactic-co-glycolic acid)-poly(ethylene glycol)-NH(2) (PLGA-b-PEG-NH(2)) block copolymer was electrospun to produce surface functionalized nanofibers. The resulting nanofibrous mesh with primary amine groups on the surface was applied for immobilization of biologically active molecules using lysozyme as a model enzyme. Lysozyme was immobilized via covalent conjugation by using a homobifunctional coupling agent. The nanofibrous mesh could immobilize a far greater amount of lysozyme on the surface with concomitantly increased activity, primarily due to its larger surface area, compared to that of the solvent casting film. It was also found that the enzyme immobilization process slightly altered thermal and pH-dependent catalytic activity profiles compared to those of native lysozyme. The results demonstrated the surface functionalized electrospun nanofibrous mesh could be used as a promising material for immobilizing a wide range of bioactive molecules.     

Adsorption of papain with Cibacron Blue F3GA carrying chitosan-coated nylon affinity membranes

Covalent coupling of chitosan (CS) to activated nylon membrane was performed after the reaction of the microporous nylon membrane with formaldehyde. Non-specific adsorption on the CS-coated nylon membrane decreased greatly, compared with plain nylon membrane. The dye Cibacron Blue F3GA (CB F3GA) as a ligand was then covalently immobilized on the CS-coated membranes. Physical properties of the composite membrane and its applications in affinity membrane chromatography were examined. The contents of CS and CB F3GA-attached membranes were 89.6 mg/g nylon membrane and 146.1 micromol/g nylon membrane, respectively. These CB F3GA-attached composite membranes were used in the papain adsorption studies. Higher papain adsorption capacity, up to 235.3mg/g affinity membrane, was obtained. The adsorption isotherm fitted the Freundlich model well. Significant amount of the adsorbed papain (about 94.3%) was eluted by 1.0M NaSCN at pH 9.0. Experiments on regeneration and dynamic adsorption were also performed. It appears that CB F3GA-CS nylon membranes can be applied for papain separation without causing any denaturation.