A Life-Cycle Approach to Purchasing and Using Environmentally Preferable Paper

The PaperTask Force, a group of major U.S. paper purchasers convened by the Environmental Defense Fund (EDF), recently completed a life cycle-based study of various grades of paper that examined a broad range of economic, functional, and especially environmental issue. This 28-month effort culminated in the release of a final report and recommendations intended to educate paper purchasers about the consequences of their paper purchasing decisions. The report also provides actionable steps that can be taken to increase the purchase and use of environmentally preferable paper; defined as paper that reduces environmental impacts while meeting business needs. The technical basis for the PaperTask Force recommendations is an analysis of environmental impacts associated with the entire life cycle of several major grades of paper; reaching literally from the forest to the 1andfill. The Task Force's findings and recommendations cover each of the major areas of opportunity to lessen the environmental impacts of using paper: reduction in paper use; paper recycling and buying recycled paper: forest management; and pulp and paper manufacturing. journal of Industrial Ecology I5 paper recycling     

造纸用木聚糖酶的基因工程研究进展

木聚糖酶用于造纸行业可以显著改善纸浆的性能,减少纸张处理过程中有害化学试剂的使用,从而减轻环境污染,提高纸张品质,因此在造纸工业中具有广阔的应用前景。本文从造纸用碱性木聚糖酶基因的克隆、分子改造、高效表达及在造纸行业的应用研究等方面出发,对造纸用碱性木聚糖酶的研究现状进行综述,为开发造纸用木聚糖酶提供了思路。     

Enzymatic deinking of various types of waste paper: Efficiency and characteristics

The aim of the present study was to characterize the enzymatic deinking of various types of waste paper. Studies on the optimization of enzymatic deinking have been performed previously using commercially available enzyme preparations containing cellulase and hemicellulase. The enzymatic deinking of different types of waste paper demonstrated a high efficiency of 86.6% on laser-printed paper, but a low deinking efficiency of 12.9% was obtained with newspaper. All enzymatic treatments significantly improved the drainage rate of the deinked waste paper. Enzymatic deinking increased the tensile index of magazine paper but reduced the tensile index of bubble jet-printed paper, photocopy paper and newspaper. Enzymatic hydrolysis caused a 21.1% reduction in the tear index for bubble jet-printed paper, but a 3.1% increase in the tear index was obtained for laser-printed paper relative to respective blank. In addition, enzymatic hydrolysis increased the burst index by 4.7% relative to blank for laser-printed paper. However, photocopy paper showed the highest reduction (8.3%) in the burst index relative to blank. Taken together, these results suggest that enzymatic hydrolysis is both advantageous and detrimental to the mechanical properties of deinked paper. Thus, the proper regulation of enzymatic hydrolysis is crucial to improve the quality of recycled paper.     

Enzymatic hydrolysis of waste office paper using viscosity as operating parameter

Enzymatic hydrolysis of waste office (WO) paper with feeding WO paper in a reactor was investigated using apparent viscosity as operating parameter. Since the apparent viscosity was correlated with the concentration of pulping WO paper, the amount of hydrolyzed WO paper was assumed by measuring the decrease in the apparent viscosity. Then the amount of hydrolysis WO paper and the amount of enzyme corresponding to the desired ratio were fed into the reactor. When the WO paper and 1% (to the amount of WO paper) enzyme were fed to the hydrolytic reaction, 87 g/L of reducing sugar (RS) with a hydrolytic yield of 42.2% was obtained for a 24-h hydrolysis. However, when nonpulping WO paper and 5% (to the amount of WO paper) enzyme were fed to the hydrolytic reaction, 120 g/L of RS with a hydrolytic yield of 40% was obtained for a 24-h hydrolysis. Therefore, the RS concentration from this hydrolysis process feeding WO paper using apparent viscosity as operating parameter may be of sufficient concentration to serve as a carbon source in microorganism culture or chemical feedstock.     

Towards a Sustainable Paper Cycle: A Summary

The production of paper is a key economic activity accounting in value terms for about 2.5% of the world's industrial production and 2% of world trade. Paper products make a vital contribution to education, communications, packaging, and health care. In recent years the paper cycle has become the focus of environmental concerns about the impacts of forestry pollution from manufacturing, and waste. To address these concerns, the World Business Council for Sustainable Development commissioned the International Institute for Environment and Development (IIED) to examine the sustainability of the paper cycle. The first phase ofthe study involved a review of literature related to the paper cycle to identify the main debates and gaps in knowledge. This was followed by a journal of Industrial Ecology wide-ranging program of research and consultation on various aspects of the paper cycle. This article summarizes the key findings of the study for different stages of the cycle covering issues such as the impacts of forestry, the outlook for fiber supply, the role of nonwood fiber; the environmental and social impacts of pulp and paper manufacturing, the choice of options for wastepaper and the contribution of the paper cycle to greenhouse gas emissions. The study makes a number of recommendations for the pulp and paper industry, governments, international agencies, consumers, and nongovernmental organizations     

Some multi-dimensional branching processes as motivated by a class of problems in mathematical genetics II

This paper is a continuation of a paper, “Some Multi-Dimensional Branching Processes as Motivated by a Class of Problems in Mathematical Genetics I,” by C. J. Mode, which appeared in a previous issue of theBulletin. Its purpose is two-fold; namely to discuss the mathematical existence of the model and to supply the mathematical proofs of some theorems in section two of the paper mentioned above. This paper should be read in conjunction with the previous paper. The research reported in this paper was supported in part by the United States Atomic Energy Commission, Division of Biology and Medicine Project AT(45-1)-1729.     

A bioremediation case of an ex-quarry area restored by paper sludge

Most paper industry waste is in the form of sludge from paper production and recycle process paper. There has been an increasing use of paper sludge in environmental restoration, a practice that requires particular attention. This issue presents a case which demonstrates how the biogas production related to this kind of recovery system can represent a problem for environmental protection and public health. The case history relates to a former quarry area restored by means of paper sludge. After the filling, a substantial quantity of biogas was produced, with an external diffusion to sensible target as well. Initial investigations showed that the area was characterized by a large amount of paper mill sludge made unstable by anaerobic conditions. To date there are no proven technologies for this kind of treatment. In this case, for safety and naturalization as agricultural area, new methods of bioremediation were used and, in particular, an innovative physical, mechanical and biological intervention, based on bio-stabilization of paper mill sludge. The treatment is site-specific, based on the in-site paper sludge biostabilisation. To complete the intervention and in order to demonstrate its validity an important monitoring activity was performed, testing all the phases affected by the biological transformation.     

MXene‐on‐Paper Coplanar Microsupercapacitors

A simple and scalable direct laser machining process to fabricate MXene‐on‐paper coplanar microsupercapacitors is reported. Commercially available printing paper is employed as a platform in order to coat either hydrofluoric acid‐etched or clay‐like 2D Ti₃C₂ MXene sheets, followed by laser machining to fabricate thick‐film MXene coplanar electrodes over a large area. The size, morphology, and conductivity of the 2D MXene sheets are found to strongly affect the electrochemical performance due to the efficiency of the ion‐electron kinetics within the layered MXene sheets. The areal performance metrics of Ti₃C₂ MXene‐on‐paper microsupercapacitors show very competitive power‐energy densities, comparable to the reported state‐of‐the‐art paper‐based microsupercapacitors. Various device architectures are fabricated using the MXene‐on‐paper electrodes and successfully demonstrated as a micropower source for light emitting diodes. The MXene‐on‐paper electrodes show promise for flexible on‐paper energy storage devices.     

Facile Preparation of Nanostructured,Superhydrophobic Filter Paper for Efficient Water/Oil Separation

In this paper, we present a facile and cost-effective method to obtain superhydrophobic filter paper and demonstrate its application for efficient water/oil separation. By coupling structurally distinct organosilane precursors (e.g., octadecyltrichlorosilane and methyltrichlorosilane) to paper fibers under controlled reaction conditions, we have formulated a simple, inexpensive, and efficient protocol to achieve a desirable superhydrophobic and superoleophilic surface on conventional filter paper. The silanized superhydrophobic filter paper showed nanostructured morphology and demonstrated great separation efficiency (up to 99.4%) for water/oil mixtures. The modified filter paper is stable in both aqueous solutions and organic solvents, and can be reused multiple times. The present study shows that our newly developed binary silanization is a promising method of modifying cellulose-based materials for practical applications, in particular the treatment of industrial waste water and ecosystem recovery.     

The uniqueness of wave solutions for the deterministic non-reducible n-type epidemic

In a recent paper, [8], we investigated the existence of wave solutions for a model of the deterministic non-reducible n-type epidemic. In this paper we first prove two properties left as an open question in that paper. The uniqueness of the wave solutions at all speeds for which a wave solution exists is then established. Only an exceptional case is not covered.     

Global Life Cycle Paper Flows,Recycling Metrics,and Material Efficiency

Despite major improvements in recycling over the last decades, the pulp and paper sector is a significant contributor to global greenhouse gas emissions and other environmental pressures. Further reduction of virgin material requirements and environmental impacts requires a detailed understanding of the global material flows in paper production and consumption. This study constructs a Sankey diagram of global material flows in the paper life cycle, from primary inputs to end‐of‐life waste treatment, based on a review of publicly available data. It then analyzes potential improvements in material flows and discusses recycling and material efficiency metrics. The article argues that the use of the collection rate as a recycling metric does not directly stimulate avoidance of virgin inputs and associated impacts. An alternative metric compares paper for recycling (recovered paper) with total fibrous inputs and indicates that the current rate is at just over half of the technical potential. Material efficiency metrics are found to be more useful if they relate to the reuse potential of wastes. The material balance developed in this research provides a solid basis for further study of global sustainable production and consumption of paper. The conclusions on recycling and efficiency should be considered for improving environmental assessment and stimulating a shift toward resource efficiency and the circular economy.     

A fragment-cofragment model of antibody incidence structures

In the predecessor to this paper, "Uncovering Antibody Incidence Structures," Markowsky and Wohlgemuth presented a model which allowed one to calculate best possible solutions for the relation between individuals and antibodies given certain sets of tests each of which is analyzed simply for the presence or absence of a reaction. In this paper, we show that many of the concepts and theorems of the first paper generalize to the case where we actually try to compare the strengths of various reaction tests. As one might expect, the resulting model has a greater ability to detect the presence of antibodies than the model presented in the first paper. Furthermore, the additional information generated by the model described in this paper allows one to present a fairly concise definition of the best possible solution for a given amount of reaction test data.     

Elevational Patterns of Diversity and Abundance of Eusocial Paper Wasps (Vespidae) in Costa Rica

We used a standard sampling protocol to measure elevational patterns of species richness and abundance of eusocial paper wasps (Hymenoptera: Vespidae) in Costa Rica. The sample transect of six sites spanned approximately 2000 m in elevation from lowland to montane forest. Species accumulation curves and species richness estimates both document a low elevation peak in paper wasp species richness at 50 and 300 m asl, with a decline in species richness at higher elevations. Comparison of species composition among elevations revealed strong species turnover from a rich lowland fauna to a depauperate, but distinct, montane fauna. We also observed a general trend toward a greater abundance of paper wasps at higher elevations, a pattern not usually observed in eusocial insects. Army ant species that prey on paper wasps declined in abundance with elevation across the sample transect, a pattern that has been observed at other sites. We discuss the possibility that elevational changes in predation pressure affect variation in paper wasp abundance and species richness. Eusocial paper wasp species employ one of two modes of colony founding, independent and swarm founding. We found that the total abundance of individual swarm-founding wasps was higher at all elevations than the abundance of independent-founding wasps, supporting previous suggestions that Neotropical swarm founders are more successful ecologically.     

LCA of a newsprint paper machine: a case study of capital equipment

Purpose

The environmental aspects of paper as a consumer good have been extensively studied. However, the paper machine has been mostly neglected in the literature. The purpose of this article is to present a LCA case study that explicitly focuses on the system of a newsprint paper machine and its environmental impacts and not on the system of the consumer good paper. The relevance of the paper machine as capital equipment is analyzed, and conclusions for the environmental improvement of paper machines are drawn based on identified hotspots. The article hereby answers the more general research questions of whether capital equipment has rightly been neglected in other studies regarding pulp and paper and which impact categories are important for analyzing the environmental burdens of a paper machine.

Methods

The study has been executed in collaboration with Voith Paper, an original equipment manufacturer. Hence, in distinction to literature-based studies, primary data on the paper machine was available resulting in a high overall data quality. Based on the ISO 14040 (2006) and 14044 (2006) standards, this article pursues a cradle-to-grave approach for the paper machine. It assesses the environmental impacts in the impact categories defined by the ReCiPe impact assessment methodology. Different types of energy generation are examined in a scenario analysis with combined heat and power generation (CHP) as the baseline case. For interpretation, a normalization and a sectoral analysis are performed.

Results and discussion

The normalized results indicate fossil resource depletion and global warming as the most important impact categories. Global warming impacts are highly dependent on the energy processes and result to 432.7 kg CO2e per production of 1 t of paper for CHP and to 701.7 kg CO2e for EU25 grid mix. The sectoral analysis shows that the machinery's operations/use phase is clearly dominating most impact categories due to its long lifetime. An exception is the metal depletion, for which the materials and manufacturing processes are most important.

Conclusions

These findings prove that for most categories, the operations/use phase of the paper machine is the most important life cycle stage. In systems focusing on the consumer good paper, it is therefore sufficient to model the operation of the paper machine, whereas the manufacturing, transport, and end-of-life processes regarding the paper machine equipment can be neglected, unless metal depletion is important to the study.     

The Nonlinear Relationship between Paper Recycling and Primary Pulp Requirements

Waste paper is suitable for recycling back into paper or for incineration for energy recovery. If waste paper is used for recycling, secondary pulp replaces virgin pulp. Fiber recycling is limited, however, because of physical constraints—particularly the breakage of fiber in the recycling process—and a permanent input of virgin fiber to the system is required. Therefore one can expect that the relationship between recycling rates and resource requirements is represented by a curved line rather than a straight one. In this article, we present a mathematical model which confirms that the relationship between recycling rates and primary pulp requirements can be described as nonlinear. Furthermore, we show that this nonlinear relationship leads to an optimal recycling rate with regard to energy consumption: 93 persent for paper produced from chemical pulp, and 81 persent for paper produced from mechanical pulp. Sensitivity testing additionally reveals that at low recycling rates increasing waste paper recycling is energy efficient, but it becomes less efficient at higher recycling rates. Close to the optimum recycling rates (within 10 persent), increasing or decreasing the rate affects the total energy requirement less than 0.3%     

生孢噬纤维细菌的滤纸纤维素的降解过程研究

生孢噬纤维细菌(Sporocytophaga)是能够降解纤维素的滑动细菌,它可将滤纸和棉花纤维素完全降解;但其可测得的纤维素酶活性极低。为研究其纤维素降解机制,本文采用扫描电子显微镜观察了一株生孢噬纤维细菌(Sporocytophaga sp.) JL01对滤纸纤维素的降解过程,分析了在此过程中滤纸纤维素的降解与菌体形态变化之间的关系。结果表明：生孢噬纤维细菌在纤维素降解过程中,形成长度为2.5μm～4.0μm可弯曲的细长杆状细胞,该细长杆状细胞通过与纤维素分子的吸附或嵌入纤维素中完成对纤维素的降解;在降解后期,杆状细胞转化为直径约为0.6μm的小孢囊休眠细胞。     

Hypothesis Testing Procedures for a Series of Independent Fourfold Tables under Inverse Sampling

This paper considers four summary test statistics, including the one recently proposed by Bennett (1986, Biometrical Journal 28, 859–862), for hypothesis testing of association in a series of independent fourfold tables under inverse sampling. This paper provides a systematic and quantitative evaluation of the small-sample performance for these summary test statistics on the basis of a Monte Carlo simulation. This paper notes that the test statistic developed by Bennett (1986) can be conservative and thereby possibly lose the power when the underlying disease is not rare. This paper also finds that for given a fixed total number of cases in each table, the conditional test statistic is the best in controlling type I error among all test statistics considered here.     

Responses to Comments and Closer to a Definition of Applied Psychophysiology

This paper responds to the nine response papers to the initial paper in this series. This paper also presents a revised working definition of applied psychophysiology which is in concert with many of the responses.     

Perspectives on the U.S. Paper Industry and Sustainable Production

In the past decade and a half, the U.S. paper industry became the target of an unusual convergence of environmental concerns. These concerns have focused on the industrys role in forest and biodiversity depletion, the municipal solid waste management crisis, and various toxic chemical pollution problems. Although such concerns are traditionally treated as distinct environmental policy areas, the prominence of the paper industvs impacts in each area gave rise to an increasingly integrated environmental perspective fixed on the system of paper production and consumption, and on the paper industry itself. The argument advanced here suggests that the structure of the modem industry itself must be a central focus in a more integrated environmental perspective that can meaningfully accommodate the multiple social, economic, and ecological goals of sustainabilrty. Two issues, paper recycling and the use of nonwood fiber sources, are discussed from this point of view. The article concludes with a discussion of how a sectoral analysis of environmental problems can be Addrw correspondence tot used to frame a comprehensive strategic vision of attemative futures in the industry, and to design effective public policies and strategies