Recombinant proteins L and LG: efficient tools for purification of murine immunoglobulin G fragments

In order to improve antibody purification methods, recombinant proteins L and LG were tested in the purification of murine monoclonal immunoglobulin G (IgG) and its fragments. After affinity constant evaluation in different buffer systems, high-performance affinity chromatographic columns were prepared by coupling the proteins to Affi-prep 10 resin and tested with eight different murine monoclonal antibodies and their fragments of different isotypes. Affinity chromatographic experiments confirmed radioimmunoassay results showing that protein L bound 75% of the tested antibody fragments whereas protein LG had affinity for all the tested fragments. These results demonstrate that protein LG is the most powerful Ig-binding tool so far described.     

Use of weak monoclonal antibodies for affinity chromatography

When using weakly interacting ligands in affinity chromatography, it is possible to take advantage of a true chromatographic process in the separation, as compared with traditional affinity chromatography which is rather an on/off process. In this work, weak monoclonal antibodies were immobilized on a silica and a perfusion-type support (POROS AL) and used for high-performance liquid affinity chromatography (HPLAC). Similar carbohydrate antigens were separated under isocratic conditions according to their weak interaction with the immobilized monoclonal antibody. The affinity of the antibodies was adjusted with temperature and pH to modify the separation. The productivity of the chromatographic system was increased with the immobilized perfusion support but at the expense of loss of plate numbers. This study clearly demonstrates the potential of weak affinity biological interactions as a basis for chromatographic separation.     

On-line post-capillary affinity detection of immunoglobulin G for capillary zone electrophoresis

To address the quality issues of antibody manufacturing, post-capillary affinity detection of immunoglobulin G (IgG) is developed for capillary zone electrophoresis. In analogy to a two-dimensional separation system, capillary zone electrophoresis (CZE), as the first dimension, resolves IgG variants based on their differences in molecular structure. IgG variants separated by CZE are discriminated against other serum and cellular proteins by affinity complex formation with protein A binding fragment in a post-capillary reactor. The analytical power of post-capillary affinity detection is demonstrated for rapid and selective heterogeneity analysis of human IgG subclasses and monoclonal antibodies in complex sample matrices. By comparing with pre-capillary formation of affinity complexes between IgG and protein A, post-capillary affinity detection clearly exhibit greater resolving power for examining IgG microheterogeneity. Affinity complex formation prior to CZE analysis, however, has the advantage of lower detection limits. Detection limits suffer with post-capillary affinity detection because of the high fluorescence background contributed by the fluorescently labeled protein A in the post-capillary reactor, and the need to determine a small change in the background level upon complex formation.     

The development of rapid fluorescence-based immunoassays, using quantum dot-labelled antibodies for the detection of Listeria monocytogenes cell surface proteins

Listeria monocytogenes is an important food-borne pathogen with an extremely high mortality rate (approximately 30%). Therefore, a highly sensitive, reproducible and rapid assay for its detection is vital. L. monocytogenes cells employ two surface bound proteins, Internalin A (InlA) and Internalin B (InlB) to promote invasion into host cells. Recombinant forms of both proteins were previously cloned and expressed in Escherichia coli. In this paper we describe how the InlB protein was sub-divided into three shorter overlapping peptide fragments yielding truncated functional protein of M(R) 23, 35 and 45 kDa, respectively. Purification of the InlB fragments by immobilised metal affinity chromatography (IMAC) was optimised and confirmed by electrophoresis and Western blotting. Identification of the antibody binding regions was achieved by probing the expressed polypeptide domains with a panel of antibodies and antibody fragments. The cloned peptide fragments were also used to develop novel fluorescence-based immunoassays incorporating quantum dots. The application of quantum dot-labelled anti-InlA monoclonal antibodies for immunostaining L. monocytogenes was also demonstrated.     

On-line monitoring of the purification of GST-(His)6 from an unclarified Escherichia coli homogenate within an immobilised metal affinity expanded bed

The use of a rapid chromatographic assay to monitor the level of a specific protein during its downstream processing by expanded bed adsorption is described. An expanded bed column (5 cm diameter) has been modified to allow the abstraction of liquid samples at various heights along the bed, in an automated, semi-continuous manner throughout the separation. The withdrawn samples were filtered in-line and the level of the target protein assayed by a rapid on-line chromatographic method. Using this technique it was possible to monitor the development of adsorbate profiles during the loading, washing and elution phases of the application of an unclarified feedstock. The potential of the technique is demonstrated using the separation of histidine tagged glutathione s-transferase (GST-(His)₆) from an unclarified Escherichia coli homogenate using an expanded bed of Ni²⁺ loaded STREAMLINE Chelating^TM. The level of GST-(His)₆ in the abstracted homogenate samples was measured using Zn²⁺ loaded NTA-silica as an affinity chromatographic sensor. The approach described demonstrates potential for the on-line monitoring and control of expanded bed separations and for providing a greater understanding of adsorption/desorption and hydrodynamic processes occurring within the bed.     

Using precipitation by polyamines as an alternative to chromatographic separation in antibody purification processes

Polyamine precipitation conditions for removing host cell protein impurities from the cell culture fluid containing monoclonal antibody were studied. We examined the impact of polyamine concentration, size, structure, cell culture fluid pH and ionic strength. A 96-well microtiter plate based high throughput screening method was developed and used for evaluating different polyamines. Polyallylamine, polyvinylamine, branched polyethyleneimine and poly(dimethylamine-co-epichlorohydrin-ethylenediamine) were identified as efficient precipitants in removing host cell protein impurities. Leveraging from the screening results, we incorporated a polyamine precipitation step into a monoclonal antibody purification process to replace the Protein A chromatography step. The optimization of the overall purification process was performed by taking the mechanisms of both precipitation and chromatographic separation into account. The precipitation-containing process removed a similar amount of process-related impurities, including host cell proteins, DNA, insulin and gentamicin and maintained similar product quality in respect of size and charge variants to chromatography based purification. Overall recovery yield was comparable to the typical Protein A affinity chromatography based antibody purification process.     

Protein binding to polymer brush,based on ion-exchange,hydrophobic, and affinity interactions

The major limitations associated with conventional packed bed chromatography for protein separation and purification can be overcome by using adsorptive microporous membranes as chromatographic media. Microporous membranes have advantages as support matrices in comparison to conventional bead supports because they are not compressible and they eliminate diffusion limitations. As a result, higher throughput and shorter processing times are possible using these membrane systems. In this paper, we review the current state of development in the area of attaching functionalized polymer brushes onto a microporous membrane to form a novel chromatographic medium for protein separation and purification. The functionalized polymer brushes were appended onto the pore surface of a microporous hollow-fiber membrane uniformly across the membrane thickness by radiation-induced graft polymerization and subsequent chemical modifications. We review various applications of this adsorptive membrane chromatography by focusing on polymer brushes bearing ion-exchange, hydrophobic and affinity groups. Proteins were captured in multilayers by the ion-exchange group-containing polymer brushes due to the formation of a three-dimensional space for protein binding via the electrostatic repulsion of the polymer brushes. In contrast, proteins were captured in a monolayer at most by the polymer brushes containing hydrophobic or affinity ligands. By permeating a protein solution through the pores rimmed by the polymer brushes, an ideal capturing rate of the proteins with a negligible diffusional mass-transfer resistance was achieved by the functionalized polymer brushes, based on ion-exchange, hydrophobic, and affinity interactions.     

The Strep-tag system for one-step purification and high-affinity detection or capturing of proteins

The Strep-tag II is an eight-residue minimal peptide sequence (Trp-Ser-His-Pro-Gln-Phe-Glu-Lys) that exhibits intrinsic affinity toward streptavidin and can be fused to recombinant proteins in various fashions. We describe a protocol that enables quick and mild purification of corresponding Strep-tag II fusion proteins--including their complexes with interacting partners--both from bacterial and eukaryotic cell lysates using affinity chromatography on a matrix carrying an engineered streptavidin (Strep-Tactin), which can be accomplished within 1 h. A high-affinity monoclonal antibody (StrepMAB-Immo) permits stable immobilization of Strep-tag II fusion proteins to solid surfaces, for example, for surface plasmon resonance analysis. Selective and sensitive detection on western blots is achieved with Strep-Tactin/enzyme conjugates or another monoclonal antibody (StrepMAB-Classic). Thus, the Strep-tag II, which is short, biologically inert, proteolytically stable and does not interfere with membrane translocation or protein folding, offers a versatile tool both for the rapid isolation of a functional gene product and for its detection or molecular interaction analysis.     

Virus elimination during the recycling of chromatographic columns used during the manufacture of coagulation factors

Various chromatographic procedures are used during the purification and manufacture of plasma products such as coagulation factors. These steps contribute to the overall safety of such products by removing potential virus contamination. Virus removal by two affinity chromatography procedures, i.e. monoclonal antibody chromatography and metal chelate chromatography (immobilised metal ion affinity chromatography), used during the manufacture of the high purity factor VIII (Replenate^®) and factor IX (Replenine^®-VF), respectively, has been investigated. In addition, as these columns are recycled after use, the effectiveness of the sanitisation procedures for preventing possible cross-contamination, has also been investigated.Both chromatographic steps proved effective for eliminating a range of model enveloped and non-enveloped viruses by 4 to >6 and 5 to >8 log for the monoclonal and metal chelate columns, respectively. The effectiveness of the relatively mild column sanitisation conditions used, i.e. ethanol for factor IX and acetic acid for factor VIII, was confirmed using non-spiked column runs. The chemicals used contributed to virus elimination by inactivation and/or by physical removal of the virus. In summary, these studies demonstrate that potential virus contamination between chromatographic runs can be prevented when an effective column recycling and sanitisation procedure is included.     

Functional monolithic platforms: Chromatographic tools for antibody purification

Polymer monoliths are an efficient platform for antibody purification. The use of monoclonal antibodies (mAbs) and engineered antibody structures as therapeutics has increased exponentially over the past few decades. Several approaches use polymer monoliths to purify large quantities of antibody with defined clinical and performance requirements. Functional monolithic supports have attracted a great deal of attention as they offer practical advantages for antibody purification, such as more rapid analysis, smaller sample volume requirements and the opportunity for a greater target molecule enrichment. This review focuses on the development of synthetic and natural polymer-based monoliths for antibody purification. The materials and methods employed in monolith production are discussed, highlighting the properties of each system. We also review the structural characterization techniques available using monolithic systems and their performance under different chromatographic approaches to antibody capture and release. Finally, a summary of monolithic platforms developed for antibody separation is presented, as well as expected trends in research to solve current and future challenges in this field. This review comprises a comprehensive analysis of proposed solutions highlighting the remarkable potential of monolithic platforms.     

Protein separation using non-porous sorbents

This article overviews the development of non-porous sorbents having small particle diameters which have proven effective for rapid analysis and micropreparative separation of proteins by liquid chromatography. Much attention is given to the preparation and application of silica- and polystyrene-based non-porous packings for various chromatographic modes, especially affinity chromatography. Modeling works on the prediction and parameter estimation for the dynamics of protein adsorption using non-porous sorbents are reviewed and briefly described. To conclude this review, future prospects of the application of non-porous sorbents are also presented.     

Emerging trends in the synthesis and improvement of hapten-specific recombinant antibodies

A key requirement for successful immunotherapeutic and immunodiagnostic applications is the availability of antibodies with high affinity and specificity. In the past, polyclonal antibodies from hyperimmunized animals or monoclonal antibodies from hybridoma cell lines were used extensively and profitably in medicine and immunotechnology. Antibody-based diagnostics, such as immunoassays, are also widely accepted because of their high sensitivity and ease of use as compared to conventional chromatographic techniques. While immunoassays have been used to monitor organic chemical contaminants such as pesticides, food preservatives, antibiotics in agricultural and food industries, hapten-specific antibodies with the desired affinity and specificity are generally difficult to obtain. With the advent of recombinant DNA technology, antibody genes can be amplified and selected through phage display, cell surface display, or cell-free display systems. A particularly useful feature common to all these display systems is the linking of the phenotype and genotype of antibodies during selection. This allows easy co-selection of the desired antibodies and their encoding genes based on the binding characteristics of the displayed antibodies. The selected antibody DNA can be further manipulated for high-level expression, post-translation modification, and/or affinity and specificity improvement to suit their particular applications. Several hapten-specific antibodies, which were successfully selected and engineered to high specificity and affinity using display technologies, have been found to be amenable to conventional immunoassay development. In this review, we will examine different formats of immunoassays designed for hapten identification and various display technologies available for antibody selection and improvement.     

Extension of the selection of protein chromatography and the rate model to affinity chromatography

The rational selection of optimal protein purification sequences, as well as mathematical models that simulate and allow optimization of chromatographic protein purification processes have been developed for purification procedures such as ion-exchange, hydrophobic interaction and gel filtration chromatography. This paper investigates the extension of such analysis to affinity chromatography both in the selection of chromatographic processes and in the use of the rate model for mathematical modelling and simulation. Two affinity systems were used: Blue Sepharose and Protein A. The extension of the theory developed previously for ion-exchange and HIC chromatography to affinity separations is analyzed in this paper. For the selection of operations two algorithms are used. In the first, the value of η, which corresponds to the efficiency (resolution) of the actual chromatography and, Σ, which determines the amount of a particular contaminant eliminated after each separation step, which determines the purity, have to be determined. It was found that the value of both these parameters is not generic for affinity separations but will depend on the type of affinity system used and will have to be determined on a case by case basis. With Blue Sepharose a salt gradient was used and with Protein A, a pH gradient. Parameters were determined with individual proteins and simulations of the protein mixtures were done. This approach allows investigation of chromatographic protein purification in a holistic manner that includes ion-exchange, HIC, gel filtration and affinity separations for the first time.     

Application of inline variable pathlength technology for rapid determination of dynamic binding capacity in downstream process development of biopharmaceuticals

Determination of dynamic binding capacity (DBC) for capture purification chromatographic step is usually the first experiment to be performed during downstream process development of biopharmaceuticals. In this work, we investigated the application of inline variable pathlength technology using FlowVPE for rapid determination of DBC on affinity resins for protein capture and proved its comparability with offline titer methods. This work also demonstrated that variable pathlength technology for DBC determination can be successfully applied to different classes of monoclonal antibodies and fusion proteins. This enabled rapid screening of affinity resins and optimization of the capture chromatography step. Hence, use of inline variable pathlength technology eliminated the dependency on offline titer data, traditionally used for DBC determination and accelerated overall process development timelines with less cost.     

Monoclonal antibodies and mechanistic studies on recA protein.

A protein has various epitopes, and a monoclonal antibody specifically binds to the protein by recognizing 1 of the epitopes. This characteristic of the monoclonal antibody has opened various new approaches in a wide variety of research works. In studies about recA protein and its promoted various reactions relating to genetic recombination, anti-recA protein-monoclonal antibodies are very useful to analyse reaction mechanisms and to detect transition in the higher order-structure of the protein, as well as to measure the amounts of recA protein in vitro or in vivo and to identify the related proteins. In this article, we will review studies on recA protein in which monoclonal antibodies were used as major tools. By using anti-recA protein-monoclonal IgGs as specific inhibitors, the partial reactions of the homologous pairing and strand exchange promoted by recA protein were separated, and by use of a set of anti-recA protein IgGs the stages of activation of recA protein in the above reactions were discriminated.     

Direct magnetic separation of immune cells from whole blood using bacterial magnetic particles displaying protein G

Direct separation of target cells from mixed population, such as peripheral blood, umbilical cord blood, and bone marrow, is an essential technique for various therapeutic or diagnosis applications. In this study, novel particles were fabricated, and direct magnetic separation of immune cells from whole blood using such particles was performed. The magnetotactic bacterium Magnetospirillum magneticum AMB‐1 synthesizes intracellular bacterial magnetic particles (BacMPs), and protein G was expressed on the surface of the BacMPs by gene fusion techniques with anchor proteins isolated from BacMP membrane. The BacMPs displaying protein G (protein G‐BacMPs) had high binding capabilities to a wide range of antibody types, and various versions of protein G‐BacMPs binding with different anti‐CD monoclonal antibodies were constructed. Consequently, direct magnetic separation of immune cells from whole blood using protein G‐BacMPs binding with anti‐CD monoclonal antibodies was demonstrated. B lymphocytes (CD19⁺ cells) or T lymphocytes (CD3⁺ cells), which represent less than 0.05% in whole blood cells, were successfully separated at a purity level of more than 96%. This level was superior to that from previous reports using other magnetic separation approaches. The results of this study demonstrate the utility of protein G‐BacMP and this particle may become a powerful tool for various therapeutic or diagnosis applications. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Camelid VHH affinity ligands enable separation of closely related biopharmaceuticals

Interest in new and diverse classes of molecules such as recombinant toxins, enzymes, and blood factors continues to grow for use a biotherapeutics. Compared to monoclonal antibodies, these novel drugs typically lack a commercially available affinity chromatography option, which leads to greater process complexity, longer development timelines, and poor platformability. To date, for both monoclonal antibodies and novel molecules, affinity chromatography has been mostly reserved for separation of process‐related impurities such as host cell proteins and DNA. Reports of affinity purification of closely related product variants and modified forms are much rarer. In this work we describe custom affinity chromatography development using camelid V_HH antibody fragments as "tunable" immunoaffinity ligands for separation of product‐related impurities. One example demonstrates high selectivity for a recombinant immunotoxin where no binding was observed for an undesired deamidated species. Also discussed is affinity purification of a coagulation factor through specific recognition of the gamma‐carboxylglutamic acid domain.     

Centrifugal precipitation chromatography: principle, apparatus, and optimization of key parameters for protein fractionation by ammonium sulfate precipitation

A novel chromatographic system introduced here internally generates a concentration gradient of ammonium sulfate (AS) through a long separation channel under a centrifugal force field. Protein samples are exposed to a gradually increasing AS concentration and precipitated along the channel. Then, chromatographic elution is initiated by gradually decreasing the AS concentration in the gradient which causes the proteins to repeat dissolution and precipitation through the channel. Consequently, they are eluted out in the order of their solubility in the AS solution. The separation column consists of a pair of disks equipped with mutually mirror-imaged spiral grooves. A dialysis membrane is sandwiched between the disks to form two identical channels partitioned by the membrane. The disk assembly is mounted on the sealless continuous-flow centrifuge. When a concentrated AS solution is eluted through one channel and water through the other channel in an opposite direction, an exponential AS gradient is formed through the water channel. A series of basic experiments was performed to study the rates of AS transfer and osmosis through the membrane, and the operational parameters including elution time, revolution speed, inclination of gradient, and sample size were optimized using stable protein samples. Preliminary applications were successful in purification of monoclonal antibody from cell culture supernatant and an affinity separation of recombinant ketosteroid isomerase from a crude Escherichia coli lysate.     

Spectral tuning of a circadian photopigment in a subterranean 'blind' mammal (Spalax ehrenbergi)

Through major research advances in the study of cytoskeletal organization, an integrated view of the complexity of this system has emerged. Recent findings on the microtubule-interacting protein Mip-90, which associates with microtubules and actin filaments in different cell domains, have shed light on its roles in cytoskeletal regulation. In order to study structural features of Mip-90, we sequenced several peptide fragments. A comparative sequence analysis revealed a high degree of similarity between the primary structure of this protein and the human heat shock protein of 90 kDa (hsp-90). Taken together, the present studies indicate the identity between Mip-90 and the the beta-isoform of hsp-90 (hsp-90beta). Western blot assays with an anti-hsp-90 monoclonal antibody showed cross-reactivity of hsp-90 and Mip-90 affinity purified from HeLa cells. Furthermore, the observed structural identity of Mip-90 with the hsp-90beta was sustained by immunoblot assays using monoclonal antibodies that specifically recognize the alpha- and beta-forms of hsp-90. Comparative fingerprinting analysis, along with the evidence of a remarkably similar biochemical behavior of both hsp-90 and Mip-90 in different affinity chromatographic systems, supported these observations. These studies, along with previous investigations, provide new data to elucidate the functional significance of these interesting cellular components and its relationships with other proteins linked to the cell architecture.