Silver Staining of Bone Prior to Decalcification for Quantitative Determination of Osteoid in Sections

Slices, 1-2 mm thick, of alcohol-fixed bone are immersed in 2% aqueous AgNO₃ in the dark for 48 hr. After thorough washing in running tap water, the silver phosphate formed at the interface of osteoid and calcified bone is reduced to a black deposit by 5% aqueous sodium hypophosphite containing 0.1 N NaOH, 0.2 ml/100 ml. The blocks are then immersed in 5% aqueous Na₂S₂O₃ and after further washing pass through a routine formic acid decalcification and paraffin wax embedding schedule. Sections cut at 5 μ thickness and counterstained with Van Gieson's picrofuchsin show a clear differentiation between osteoid tissue and the outer limit of calcification in trabecular or cortical bone, thus making them suitable for quantitative studies. The main advantage of the method is the production of intact stained sections without specialised embedding or cutting techniques.     

Selective Staining of Protein and Starch in Wheat Flour and its Products

The main constituents of wheat flour and many wheat flour products are wheat protein (gluten) and starch granules. The specific staining of the protein present was effected by 10 min in 0.1% aqueous ponceau 2R (C.I. No. 16150) acidified with 3—4 drops of 1 N H₂SO₄ per 50 ml of staining solution, followed by rinsing in 2 changes of distilled water, dehydrating, clearing and mounting in a resinous medium in the normal way. Staining of starch was as follows: sections or flour smears were brought to water, treated for 10 min in a protein-blocking reagent (Taninol ADR—Imperial Chemical Industries—used in 1% aqueous solution) rinsed, then stained for 3 mins in 0.5% aqueous chlorazol violet R (C.I. No. 32445) or for 10 min in either 0.5% aqueous chlorazol violet N (C.I. No. 22570), or chlorazol black E (C.I. No. 30235). Staining was followed by thorough rinsing, normal dehydration and clearing and mounting in a medium of R.I. about 1.49 to enhance visibility of unstained starch grains. The methods are applicable to flour smears, cryostat and wax sections.     

Dichromate-Chlorate Perfusion Prior to Staining Degeneration in Brain and Spinal Cord

A method of fixation compatible with both the Nauta-Gygax and Swank-Davenport procedures for degenerating nerve fibers, which shortens the time required by the former procedure, is as follows: The central nervous system is perfused with a 0.9% aqueous solution of NaCl followed by an aqueous solution containing 5% K₂Cr₂O₇ and 2.5% KClO₃. The central nervous system is then hardened in 10% formalin for 1-3 days. Tissue for Marchi-type staining can be taken at this stage. For silver staining, the processing is continued by immersion overnight in 10% formalin in 20% alcohol, and frozen sections cut the next day. Sections, up to 50μ in thickness, are collected in 10% formalin and impregnated by the Nauta-Gygax technique. Best results are obtained by impregnating within 24-48 hr after sectioning.     

Staining Paraffin Sections Without Prior Removal of the Wax

Paraffin sections are usually rehydrated before staining. It is possible to apply aqueous dye solutions without first removing the wax. Staining then occurs more slowly, and only if the embedding medium has not melted or become unduly soft after catting. To avoid this problem, sections are flattened on water no hotter than 45 C and dried overnight at 40 C. Minor technical modifications to the staining procedures are needed. Mercury deposits are removed by iodine, and a 3% solution of sodium thiosnlfate in 60% ethanol is used to remove the iodine from paraffin sections. At room temperature, progressive staining takes 10-20 tunes longer for sections in paraffin than for hydrated sections; at 45 C, this can be shortened to about three times the regular staining time. After staining, the slides are rinsed in water, air dried, dewaxed with xylene, and coverslipped in the usual way. Nuclear staining in the presence of wax was achieved with toluidine blue, O, alum-hematoxylin and Weigert's iron-hematoxylin. Eosin and van Gieson's picric acid-acid fuchsine were effective anionic counterstains. A one-step trichrome mixture containing 3 anionic dyes and phosphomolybdic acid was unsuitable for sections in wax because it Imparted colors that were nninformative and quite different from those obtained with hydrated sections. Advantages of staining in the presence of wax include economy of solvents, reduced risk of overstaining and strong adhesion of sections to slides.     

Selective Axonal Argentaffin Staining in Rat Central Nervous System after Protein Mercuration

The mercury-silver (Hg-Ag) argentaffin technique, known to stain specifically proteins in the lateral components of triads/diads in striated muscle cells, was applied to the central nervous system of adult rats. Following fixation in glutaraldehyde, axons in white and gray matter were selectively stained, but not perikarya or their proximal axon and dendrites. Neural tissues were postfixed 24 hr in 5% (w/v) mercuric acetate in 2% (v/v) acetic acid in distilled water, stained for 12-24 hr in darkness at 37-43 C with ammoniacal silver nitrate solution, freshly prepared by adding concentrated ammonia to 60% (w/v) silver nitrate solution until a small amount of silver oxide precipitate remained undissolved. Samples were then washed with freshly prepared 5% (w/v) sodium sulfite and distilled water. All steps were carried out using dark-colored glass flasks. Samples were dehydrated with ethanol and embedded in Paraplast or Poly Bed. Electron microscopy showed the silver-reducing protein inside the axons. Methylation abolished Hg-Ag axonal reactivity indicating that carboxyl groups were necessary for silver staining. Proteins with solubility properties characteristic of neurofilament proteins were involved in Hg-Ag staining. In the cerebellum the plexus of parallel fibers in the molecular layer were not stained, while basket cell axonal processes reacted intensely. The method appears to distinguish neuronal protein variants related to cytotypic differences in cytoskeletal neurofilaments.     

The Selective Staining of Mitochondria

A critical analysis of extant selective mitochondrial stains has elucidated certain empirical criteria for the adoption of dyes for trial. These criteria include a specific triphenylmethane structure for the dye, with sulfonation and the use of aniline and heat as adjuvants. By the application of these characteristics the dyes fast green FGF and light green SF yellowish were chosen for study and proved to be highly selective mitochondrial stains. They are applicable to both tissue slices and homogenate studies and permit examination of the internal structure of mitochondria.     

Selective and Contrast Staining of Granules in the Juxtaglomerular Complex

A review of four methods for staining juxtaglomerular cells revealed that one method may be highly selective for juxtaglomerular granules (JGG) whereas another may stain general cytological features in addition to the granules. The kind of research undertaken would determine the particular method to be used. Harada's (1952) method, which uses a 1:400,000 solution of gentian violet is recommended as the highly selective stain, and the Masson-Goldner stain after a Ciaccio type fixation is best for cytological detail combined with clear tinctorial contrast of the JGG.     

En Bloc Staining of Articular Cartilage and Bone

Blocks of canine and porcine articular cartilage were stained en bloc with Weigert's iron hematoxylin or Harris' hematoxylin with or without eosin Y counterstaining and cleared in methyl salicylate. The morphology and three-dimensional relationships of chondrocytes were best demonstrated with Weigert's iron hematoxylin. The morphology of the cartilage and chondrocytes was superior to that in sections of routine hematoxylin and eosin stained, paraffin processed samples. The three-dimensional localization of intracellular lipids in individual and clones of chondrocytes was observed when cartilage samples were stained with oil red O and mounted directly in a water-based medium. Blocks of decalcified bone were stained en bloc with Weigert's iron hematoxylin and cleared with methyl salicylate. The three-dimensional orientation of osteocytes around osteonal canals, in circumferential lamellae, and in interstitial lamellae was demonstrated. The morphology of “cutting cones” in cortical bone also was observed.     

Vital Staining with Neutral Red and Trypan Blue of 3H-Thymidine-Labeled Cells Prior to Autoradiography

Mouse cells cultivated in vitro were continuously labeled with tritiated thymidine for 48 hr. In representative groups of labeled cells, the percentages of dead cells were obtained by vital staining with either neutral red or trypan blue. After fixation and auto-radiography, the fraction of nonlabeled cells was determined in the same group of cells which had been used for interpretation of viability. Neither neutral red nor trypan blue used prior to autoradiography caused spurious grain formation in the emulsion.     

Selective Staining of Volutin In Corynebacterwm Diphtheriae

Stain air-dried, heat-fixed smears of the usual Loefner-medium cultures of C. diphtheriae 5 min in 0.5% aqueous chrysoidin solution. Wash with water and apply Albert's iodine for 1 min. Wash with water and air-dry. Volutin stains brownish black or black, the bacterial body weak brown or yellow. There is no staining of nuclear structures.     

The Selective Staining of Red Blood Cells

A method for the selective staining of red blood cells is described. Material is fixed in 10% neutral formalin in .85% NaCl and imbedded in paraffin or celloidin. Sections 6-10 μ are stained 1-5 minutes in chromotrope 2R. Basophilic and the less strongly acidophilic elements are decolorized with 5% phosphotungstic acid in 95% ethyl alcohol. Red blood cells and other strongly acidophilic elements that may be present in the preparation retain the chromotrope 2R. A counterstain of methyl blue may be used for staining the decolorized basophilic elements. As a result, erythrocytes are stained red by the chromotrope 2R, and basophilic elements blue, by the methyl blue. Less strongly acidophilic elements, having little affinity for either primary or secondary dye, are colorless or gray.     

Large Specimen Bone Embedment and Cement Line Staining

Undecalcified embedment of large bone specimens is often challenging. A method is presented here that is suitable for methacrylate embedment of sections of canine vertebrae while retaining the ability to localize tartrate-resistant acid phosphatase and alkaline phosphatase activity. Specimens also retained tetracycline labelling, and sectioned preparations were readily stained with routine bone procedures. A modification of the Bodian silver stain, used for examining the nerves and spinal cord in these specimens, provided a useful stain for canaliculi and cement lines in trabecular and cortical bone. This stain is advantageous when both bone and nerve tissue are of interest, as in spinal fusion studies.     

Microwave-Stimulated Staining of Plastic Embedded Bone Marrow Sections with the Romanowsky-Giemsa Stain: Improved Staining Patterns

Staining plastic sections with the Romanowsky-Giemsa method is both time-consuming and difficult. This paper reports how the staining time can be reduced to 25 min using microwave irradiation of the staining solution. It is shown that staining results depend on the fixative used, staining temperature, dye concentration and pH of the staining solution as well as on several parameters of the microwave irradiation technique. The staining patterns are improved when compared with those obtained by conventional staining of plastic sections. The colors are more brilliant and greater contrasts are observed. Basophilia, polychromasia, and orthochromasia accompanying red cell maturation are more pronounced. For white cell maturation the initial appearance of specific granules (neutrophil, basophil, and eosinophil) is more evident. Thus, cell classification is easily accomplished using the described technique. It is suggested that microwave-stimulated staining be considered for routine use.     

Selective Staining of Magnesium by Titan Yellow Applied to Incinerated Tissue Sections

Tissue sections were microincinerated with a Bunsen burner, allowed to cool, and coated with an 0.2% aqueous solution of titan yellow. Upon addition of 2 N NaOH, sites of magnesium deposits exhibited a flame red color, which persisted as long as the alkalinity of the mounting medium was preserved. Tests with calcium salts dissolved in serum were negative.     

Selective Staining of Mast Cell Granules with Chrysoidin

A simple chrysoidin stain (0.5% aqueous solution, 5-10 min) is selective for mast cell granules; alum-hematoxylin-chrysoidin stains histological features in addition to the granules and periodic acid-Schiff can be used for cytological and histochemical features. Selective chrysoidin staining is probably due to strong basophilia of mast cell granules.     

Laser Microprobe Mass Analysis (LAMMA) to Verify the Aluminon Staining of Bone

Triammonium aurin tricarboxylate (aluminon) has been used to localize aluminum in 2 μm sections of undecalcified, methyl methacrylate embedded bone obtained from patients with terminal chronic renal failure. Aluminum appeared in four cases as bright red lines at the mineralized-bone boundary. In two cases, however, purplish lines were found and one patient showed red as well as purplish lines. Laser microprobe mass analysis (LAMMA) identified aluminum at the location of the red lines and both aluminum and iron at the purplish lines. Furthermore, both iron and aluminum were found in histiocytic bone marrow cells, which showed brownish aluminon staining. It appears that when aluminum and iron occur together, aluminon staining may yield aberrant results. This study shows that LAMMA can be used for the identification of elements sought by histochemical methods and thus permits the evaluation of their staining effects.     

An Automated Double Staining Procedure for Bone and Cartilage

Differential skeletal staining is an important part of developmental toxicologic studies. Traditionally these studies have required time-consuming differentiation of one or both stains used and careful attention to the maceration step to prevent specimen destruction. We present a fully automated protocol which does not require differentiation of either dye and incorporates a controlled maceration step which is highly reproducible. This has resulted in high quality staining that is reproducible, stable, and can be done in volume with minimal personnel time. The process involves the staining of skinned, eviscerated specimens fixed in 95% ethanol. Using an automated tissue processor, the specimen is stained in alcian blue for 24 hr, macerated in 3% potassium hydroxide for 24 hr and stained with murexide for 24 hr. The specimens are cleared and preserved in glycerol. Within three days specimens have red stained bone and blue stained cartilage. The procedure was developed using 20-day-old Sprague-Dawley rat fetuses to evaluate the feasibility of using the procedure for teratology studies involving the fetal skeleton. Evenly stained specimens can be examined within three days and stored for years without loss of staining.     

Concentrating and Staining Bone Marrow; An On-the-Slide Technique

A 0.5-1 ml sample of bone marrow is aspirated into a syringe containing 3 drops of 15% K₂-EDTA and an additional 1-2 drops of the EDTA solution previously placed on a slide, is then drawn into the syringe. All of the contents are ejected onto this slide, which is carefully tilted 2 or 3 times to an angle of 5-10°, and the edge brought to the center of another slide. The slide with the aspirate is then slowly tilted to 80-90°. Most of the blood and part of the marrow will drain off, leaving spicules of marrow and some blood on the original slide. A small drop of this concentrated marrow is dragged off with the edge of a third slide and deposited about 2 cm from the edge of a fourth slide on which the smear is to be made. The smear is made by bringing a clean (smearing) slide to the slide with the deposited marrow with flat surfaces parallel and the edges at a 90° angle. With gentle pressure, the smearing slide is pushed toward the empty end of the slide upon which the smear is made. This separates the marrow from the circulating blood. Before staining the smear is air dried and heated in an oven at 120-125 C for 2 min; or alternately for satisfactory but less uniform results the smear is heated over a microburner for 10 sec; then the smear is covered with 1 part of undiluted Wright's stain for 30—45 sec which is then diluted with 2 parts of a solution of 0.1-0.2 gm of Na₂S₂O₃ in 1 liter of distilled water and stained for 10-13 min with this diluted stain. Smears made in this manner have 3 concentric zones; the central zone contains the myeloid tissue; the middle, erythropoetic tissue; the outer, a mixture of blood and marrow.