Differential Staining of Degenerating Fascicles in Peripheral Nerves

A study has been made on the possibility of replacing leucofuchsin by colored basic fuchsin for the histochemical demonstration of aldehydes. Several tissues from mammals and various pertinent fixatives were used. Aldehydes were freed from carbohydrates by oxidation and from thymonucleic acid by hydrolysis.

It was found that the colored form and not necessarily the leucoform of basic fuchsin can be used histochemically in demonstrating aldehydes. The technic used is as follows: (1) Treat with 1.0–0.5% H₅IO₆ (or in 1% KIO₄ in M/1 H₂SO₄) for 5 to 10 min. and wash thoroughly. For thymonucleic acid hydrolize with N HCl 5 min. at room temperature, 10 min. at 60°C. and 5 min. at room temperature. (2) Stain for 2–3 min. with 0.05% basic fuchsin in 5% ethanol, 3% phenol. (3). Transfer immediately to 1 or 2 changes of 1% sodium bisulphite or potassium metabisulphite in 0.1–0.2 N H₂SO₄ for a total of 5 min. (4) Rinse with water and treat with M H₂SO₄ in 95% ethanol for 3–5 min. 6. Wash thoroughly in water and dehydrate, clear, and mount. For glycogen and mucin the following counterstaining solution is recommended: orange G, 0.25 g.; light green SFY, 0.10 g.; phosphotungstic acid 0.50 g.; 50% ethanol, 100 ml.; glacial acetic acid, 0.25 ml.     

Acid Fuchsin as a Connective Tissue Stain After Phosphomolybdotungstic Mordanting

Certain acid fuchsias stain connective tissue deep red after phosphomolybdotungstic mordanting in a modified Masson procedure, others are entirely unsatisfactory for mis purpose. Spectrophotometric examination gives no reliable criteria for separation of acid fuchsins satisfactory for this purpose from unsatisfactory ones. Sulphonation of basic fuchsin with 3.5 to 4 parts of 25-30% fuming H₂SO₄ to 1 part of dye gives a satisfactory product at temperatures as low as 65 to 70°C. in 30 minutes, while use of 5 to 7.5 parts of acid at this and at higher and lower temperatures gives unsatisfactory products. Satisfactory products may be produced with 15% fuming H₂SO₄ in similar quantities, and even with concentrated H₂SO₄, but some unconverted basic fuchsin remains with both and, with the latter, lower quantities give unsatisfactory products. Brief chemical studies indicate that oversulphonation may occur in the manufacture of acid fuchsin and that this is just as deleterious as undersulphonation.     

Keratin in the Egg Shells of Amphistomes; Histochemical Differentiation from Quinonetanned Protein in Other Trematoda

Various combinations of the oxidation method for demonstrating keratin in shell material of amphistomes were tried. Acidified permanganate worked more efficiently than performic and peracetic acids, and Alcian blue and aldehyde fuchsin excelled other basic dyes for subsequent staining. For the permanganate-Alcian blue reaction, sections of material fixed in Susa or Bouin were oxidized in 0.3% permanganate in 0.3% H₂SO₄ for 5 min., decolourized in 1% oxalic acid, stained in 3% Alcian blue in 2 N H₂SO₄ and counterstained with eosin. The shell globules stained a deep blue. For permanganate aldehyde fuchsin staining, the sections were stained in aldehyde fuchsin for 1 hr, after oxidation with permanganate. The shell globules then stained a deep magenta. The catechol and fast red reactions were negative in amphistomes and the specimens lack the characteristic amber colour due to quinone tanning.     

Hematoxylin-Eosin Staining of OsO4-Fixed Epon- Embedded Tissue; Prestaining Oxidation by Acidified H2O2

Successful application of hematoxylin-eosin staining to 0.5-1 μ sections of OsO₄-fixed Epon-embedded mammalian tissue is made possible by first treating the sections for approximately 1 min at 25-30 C with 10% H₂O₂ acidified with 0.1 or 0.01 N H₂SO₄ to pH 3.2. Subsequent steps are: washing; drying; Hams hematoxylin at 50 C, 1-2 min; washing; drying; 0.2-0.3% NH₄OH in 70% ethanol, 3-5 sec, drying at 50 C; 5% aqueous eosin for 3 & 45 sec at 25-30 C, washing; drying; clearing in xylene and mounting in resin. The use of acidified H₂O₂ prevents the staining of Epon and permits the characteristic staining picture to be obtained. Sections were attached to glass slides without adhesive and processed horizontally on a rack. Slides should be well drained and blotted before each drying step, to prevent formation of precipitate on the section.     

Gross Demonstration of the Mammalian Atrioventricular Bundle by A Periodic Acid-Schiff Procedure

The following procedure stains the atrioventricular conduction system selectively. (1) Wash the fresh heart with physiological saline solution to free it of blood; (2) fix it in 10% formalin containing 0.5% HIO₄ for 1 hr; (3) wash in 3 changes of distilled water for 20 min; (4) keep in 80% alcohol for 12 hr to 2 wk; (5) wash with distilled water; (6) treat with a dilute Schiff's reagent containing 0.1 gm of basic fuchsin per 100 ml for 0.5-2 min; (7) rinse in three changes of 2% Na₂SO₃ in 0.2 N HCI for 3-5 min; (8) wash and examine in 80% alcohol; store in 80% alcohol.     

Selective Staining of Neurosecretory Material in Semithin Epoxy Sections by Gomori's Aldehyde Fuchsin

The epoxy resin was removed from semithin (1 μm) sections by immersing them for 30 sec in sodium methoxide (Mayor et al., J. Biophys. Biochem. Cytol., 9: 909-10, 1961) and then processed as follows: (1) left for 1-3 hr at 60 C in a mixture of formalin, 25 ml; glacial acetic acid, 5 ml; CrO₃, 3 gm; and distilled water, 75 ml: (2) oxidized 10 min in a 1:1:6 v/v mixture of 2.5% KMnO₄, 5% H₂SO₄ and distilled water: (3) bleached in 1% oxalic acid, and (4) stained for 15 min in aldehyde fuchsin, 0.125% in 70% alcohol, or in a 1% aqueous solution of toluidine blue. The neurosecretory material is selectively stained.     

Handling Germinated Pollen on Millipore Membrane During the Feulgen and Autoradiographic Procedures

To prevent loss of pollen during the Feulgen's procedure, the pollen was grown on an autoclaved membrane filter (Millipore AA WP 025 00) in contact with a sterilized medium containing agar 0.5-1%, sucrose according to the genus (Malus 0.3-0.5 M; Persica and Tulipa 0.4 M), and H₃BO₃, 0.01%. To fix the germinated pollen of most species, the membrane was placed for 2 hr to overnight at 2-4 C on filter paper wet with the following mixture: OsO₄, 1 gm; CrO₃, 1.66 gm; and distilled water, 233 ml. To fix Persica pollen, 10% of glacial acetic acid had to be added to the fixative. Washing with distilled water and bleaching with a mixture of 3% H₂O₂ and sat. aq. ammonium oxalate, 1:1, were performed also on filter paper. Similarly, the preparation was processed for Feulgen staining by use of pieces of filter paper wet with the required fluids. Hydrolysis preceding the Schiff's reagent was performed at room temperature with 5 N HCl for 18 min. The differentiation after the Schiff's action was with 2% K₂S₂O₅ buffered to pH 2.3 with 9 ml of phosphate buffer (KH₂PO₄, 1.4 gm; conc. HCl, 0.35 ml and distilled water to make 100 ml). The stained pollen was floated off the membrane with a drop of glacial acetic acid to a gelatinized or an albumenized slide, and squashed. When the coverslip is removed the preparation may be either dehydrated and mounted or coated with autoradiographic film.     

A Consistent Phosphotungstic Acid Hematoxylin Stain for Glial Fibers

After deceration, celloidinization and hydration, oxidize 10 micron paraffin sections for 15 min in a solution containing 0.3 g KMnO₄, and 0.1 ml conc. H₂SO₂, per 100 ml distilled water. Wash in water and reduce in 5% oxalic acid until the sections are colorless. Wash thoroughly in water and place in 4% iron alum solution for two hours. Wash briefly in water and stain for two hours in phosphotungstic acid hematoxylin. Rinse briefly in 95% ethanol and dehydrate in n-butyl alcohol or absolute ethanol for 4 min with two changes, clear and mount. Glial fibers, myofibrils, red blood cells, etc. are stained blue while astrocyte cell bodies, collagen, etc. are stained red. This stain has proven highly consistent in a wide variety of astrocytic derangements. Despite the intensity of this PTAH modification, false positive staining was not observed.     

Double Staining of Plant Materials in Bulk

Ovaries and ovules of Oryza sativa and Zea mays were collected between 9-30 and 10-30 AM, fixed in formalin-acetic-alcohol, stained in Delafield's hematoxylin for 2-4 hr, dehydrated through graded ethanol, counterstained for 3-4 hr either in light green, orange G or fast green (0.05-0.1%) at the 1:1 alcohol-xylene stage and embedded. A few ovaries were hydrolysed in 1 N HCI for 25 min at 60 C, stained in leuco basic fuchsin for 60-90 min, rinsed 3 times with a mixture of: 10% Na₂S₂O₅, 1; N HC1, 1; and distilled water, 18; washed repeatedly in distilled water, dehydrated through graded ethanol, counter-stained for 3-4 hr either with light or fast green (0.05-0.1%) at the 1:1 alcohol-xylene stage and embedded. Microtome sections were cut, ribbons mounted, dried, paraffin removed with xylene, and mounted in balsam. Uniformly stained preparations resulted and the dilute stains gave vivid color contrasts. Large numbers of ovules and ovaries can be processed in a short time, and reliable percentages of viable embryo sacs in normal, sterile and semisterile plants obtained.     

Acid Orcein-Iron and Acid Orcein-Copper Stains for Elastin

Paraffin sections of formol-fixed tissues stained 4-18 hr in 70% alcohol containing 1% orcein and 1% of concentrated (12 N) HCl by volume yield the familiar purple brown elastin and red nuclei on a pink background. When sections so stained are transferred directly from the stain to 70% alcohol containing 0.02% ferric chloride (FeCl₃·6 H₂O) or 0.02% copper sulfate (CuSO₄·5 H₂O) for a 15 sec to 3 min period, elastin coloration is changed to black or reddish black and chromatin staining to reddish black. The procedure can be counterstained with picro-methyl blue to yield blue collagen and reticulum or with our flavianic acid, ferric chloride, acid fuchsin mixture to give deep yellow background and deep red collagen.     

Staining and Mounting Helminths

The following procedure is recommended: Fix ces-todes and trematodes (while held flat between glass slides) 0.5-2.0 hr. in the following mixture: formalin, 15; acetic acid (gl.), 5; glycerol, 10; 95% ethyl alcohol, 24; distilled H₂O, 46; all proportions by volume. After freeing them from the slides, wash thoroughly in running water and stain immediately thereafter. Stock staining solution: ferric ammonium alum (violet cryst.), 2 g.; distilled H₂O (cold) 100 ml.; after solution, add 2 ml. concentrated H₂SO₄, bring to a boil; add 1 g. coelestin blue B (Nat. Aniline), boil 3-5 min.; cool and add 10 ml. absolute methyl alcohol and 10 ml. glycerol. Dilute 1 vol. with 3 vol. distilled H20 for use. Stain 5-30 min., depending on size of specimens. Wash with 2 changes 0.5 hr. each of distilled H₂O, then 50% isopropyl alcohol 12-16 hr., 50% isopropyl alcohol 2 hr., followed by graded isopropyl alcohol for dehydration. Ether: ethyl alcohol (equal parts), 1 hr., is followed by embedding in celloidin in a sheet just thick enough to cover the specimens. Trim embedded specimens and dehydrate with isopropyl alcohol, 80%, 90% and absolute. Clear in beechwood creosote. Mount in balsam with cover glasses that overlap the edges of the celloidin 1-2 mm. While drying at 37°C, refill edges of mount with fresh balsam as needed. When dry, remove excess balsam and ring the edges with ordinary gloss enamel paint.     

Silver Protein Staining of Nerve Fibers in Celloidin Sections

Celloidin sections from formalin-fixed brain and spinal cord of primates are stored in 70% alcohol after cutting, soaked in 2% pyridine in 50% alcohol for 6-8 hr at 37 C, and transferred to 1% concentrated NH₄OH in 50% alcohol 15-18 hr at 20-25 C. After washing and flattening, the sections are transferred to 1% silver protein solution containing 30 ml of 0.2 M H₃BO₃/100 ml. Impregnation is accomplished in 50 ml screw-top jars, 50 mm in diameter, which are filled to a depth of 35 mm, and have 1 gm of copper foil, 0.002 inch thick added. The foil is folded in loose accordion-fashion, pierced and threaded, cleaned in 5% HNO₃, rinsed in distilled water, and suspended in the solution just above the sections by fastening the thread to the jar lid. The sections are impregnated for 24 hr at 37 C, rinsed in distilled water, reduced in a solution of 5% Na₂SO₃ and 1% hydroquinone for 10 min, washed in distilled water and toned in 0.2% gold chloride for 5 min. After rinsing in distilled water, the sections are transferred to 1% oxalic acid for 45-60 sec, washed in distilled water and placed in 5% Na₂S₂O₃ for 5 min. Sections are then washed, dehydrated to 95% alcohol, cleared in terpineol, followed by 3 changes in xylene, and mounted.     

The Destruction of Cytoplasmic Basophilia with Mineral Acids

Cytoplasmic basophilia may be selectively destroyed by the mineral acids, HNO₃, HCl and H₂SO₄. Their specificity is similar to that of ribonuclease. The optimal conditions for their use are 3°C. for 16 hours at 2M concentrations. Removal of cytoplasmic basophilia as with ribonuclease, malt diastase and perchloric acid is most effective on sections prepared from tissues fixed in solutions containing no chromates. Under the conditions herein reported the mineral acids appear to be a satisfactory and economical substitute for ribonuclease or perchloric acid.     

Counterstaining Golgi-Cox Impregnations with Luxol Fast Blue as a Myelin Stain

Immerse pieces of brain tissue 4 wk in solutions A and B, mixed just before use: A. K₂Cr₂O₇, 1 gm; HgCl₂, 1 gm; boiling distilled water, 85 ml. Boil A for 15 min, cool to 2 C and add: B. K₂CrO₄, 0.8 gm; Na₂WO₄, 0.5 gm; distilled water, 20 ml. Rinse in water and immerse 24 hr in LiOH, 0.5 gm; KNO₃, 15 gm; distilled water, 100 ml. Wash 24 hr in several changes of 0.2% acetic acid and then for 2 hr in tap water. Dehydrate and embed in celloidin. Process a 60 μ section through 70 and 95% ethanol, a 3:1 mixture of absolute ethanol and chloroform, and toluene. Immerse it for 5 min in a solution containing methyl benzoate, 25 ml; benzyl alcohol, 100 ml; chloroform, 75 ml. Orient the section on a chemically clean slide and let air-dry 5-10 min. Process through toluene, 3:1 ethanol-chloroform and 95% ethanol. Place the section for 5-60 min at 60 C in a solution made up of: Luxol fast blue G (Matheson, Coleman and Bell), 1 gm; 95% ethanol, 1000 ml; 10% acetic acid, 5 ml. Hydrate to water and immerse in 0.05% Li₂CO₃ for 3-4 min. Differentiate in 70% ethanol and place in water. Immerse for 5-15 min in a mixture of two solutions: A. cresylechtviolet (Otto C. Watzka, Montreal), 2 gm; 1 M acetic acid, 185 ml; B. 1 M sodium acetate, 15 ml; distilled water, 400 ml; absolute ethanol, 200 ml. Dehydrate to 3:1 ethanol-chloroform. Clear in toluene and apply a coverslip. The technique produces fast Golgi-Cox impregnated neurons against a background of counterstained myelinated fibers. Patterns of the myelinated fibers can be used to localize impregnated neurons.     

Staining of fresh, Undecalcified, thin Bone Sections

Fresh, undecalcified bone sections can be reproducibly and reliably stained by any of the following procedures: (A) Basic fuchsin, 1% in 30% alcohol, 48 hr, 22°C. (B) AgNO₃, 0.033 M, 48 hr, 22°C; washing 48 hr in a large volume of distilled water; exposure to light to develop the color. (C) Metallic sulfides (Co⁺⁺, Pb⁺⁺, Hg⁺⁺, Cu⁺⁺): the nitrate of the metal, 0.033 M, 48 hr, 22°C; then Na₂S, 0.033 M, 48 hr, 22° C. (D) Alizarin Red S, 0.1% solution in distilled water, 48 hr, 22°C; differentiated 48 hr at 22°C in weakly alkaline water, pH about 8. (E) KMnO₄: boiling 8-10 min in a 0.1 N, solution. With the exception of D the surface stain must be ground off the section for microscopic examination of its interior. Stain concentration, time and temperature can be altered to suit specific needs.     

Stain Technology: A Phenylhydrazine-Leucofuchsin Sequence for Staining Nerves and Nerve Endings in the Integument of Poultry

This sequence for staining cutaneous nerves and nerve endings uses 1% formic acid as a fixative for 1 hr, followed by two treatments of 5 min each in 6% H₂SO₄. The tissue is then submerged in fresh 5% phenylhydrazine hydrochloride for 30 min, washed in running tap water for 10 min, and given a 5 min soak in distilled water. The specimen is placed in Lillie's “cold Schiff” reagent for 4 hr; transferred to 6% H₂SO₄, 4 changes of 5 min each; washed in distilled water, 3 changes of 5 min each; dehydrated in acetone, 4 changes of 10 min each; and cleared in 2 changes of methyl benzoate, the 1st for 1 hr and the 2nd until the tissue clears. Nerve fibers stain pinkish-purple; muscles also take up the stain, yet the nerves are discernible from the muscles. All other tissue remain unstained.     

Characterization and Separation of Some of the Coordination Compounds of Chromium and Aluminon

Chromic nitrate and aluminon (ATA) react to form highly colored lakes. Examination of these lakes by the Vosburgh and Cooper method has led to the identification of a pigment [(ATA)Cr(H₂O)_x] which is insoluble in water and absolute alcohol, a deep red anionic component [(ATA)_BCr(H₂O)_x]^-y, and a purplish-red cationic component [(ATA)Cr₄(H₂O)_x]^+y. These components of the lake have been isolated and separated in the dry form. The anionic compound is apparently a simple coordination compound and can be used as a cytoplasmic stain while the cationic component is a chelate and can be used as a rather selective nuclear stain. In addition to these components, a number of other components were also found. Not only the ratio between chromium and aluminon but also the concentration of the reactants influences the formation of these different components. The amount of pigment formed is maximal with a molar ratio of 1 and a concentration of 10^-2 M or 10^-1 M. The anionic component is maximal with a molar ratio of 1 Cr to 6 aluminon at the 10^-1 M concentration, the cationic component is maximal with a molar ratio of 4 chromium to 1 aluminon at the 10^-1 M concentration. None of these are formed at the 10^-4 M concentration but only a deep redpurple soluble compound at the 1 : 1 ratio, which was not further investigated.     

One-dimensional polymeric chlorocadmate(II) systems of N-methylpiperazinium and N,N′-dimethylpiperazinium compounds: synthesis, structural and thermal properties

The chlorocadmate(II) systems of (H₂me₂pipz)[Cd₂Cl₆(H₂O)₂] (1) and (H₂mepipz)₂[Cd₃Cl₁₀(H₂O)] (2) (L = me₂pipz = N,N′-dimethylpiperazine; L′ = mepipz = N-methylpiperazine) were prepared and their structural and thermal properties investigated. Compound 1 is monoclinic, space group P2₁/c, A = 7.664(1), B = 7.472(4), C = 15.347(1) Å, β = 99.468(7)°, Z = 2, R = 0.024. The crystal structure consists of organic cations and infinite one-dimensional chains of [CdCl₃(H₂O)]_n³⁻ anions. Each Cd atom is octahedrally surrounded by bridged and terminal chlorine atoms and by a water molecule, which is in trans position with respect to the terminal chlorine atom. Inter- and intrachain hydrogen bond interactions between the terminal chlorine atoms and the water molecules contribute to the crystal packing. Compound 2 is orthorhombic, space group Cmc2₁, A = 15.286(3), B = 13.354(3), C = 13.154(3) Å, R = 0.023. The crystal structure consists of organic dications and infinite chains of [Cd₂Cl₆(CdCl₄H₂O]_n⁴⁻ units running along the [001] axis. Each unit is formed of regularly alternate six-coordinated Cd atoms, one of them linking one pentacoordinated Cd atom which completes its coordination througha water molecule. A strong hydrogen bond interaction involving the organic dication and the inorganic chain contributes to the crystal packing. Differential hydrogen bond interaction involving the organic dication and the inorganic chain contributes to the crystal packing. Differential scanning calorimetry measurements did not show the presence of any structural phase transitions. The structures are compared with those of (H₂pipz)[Cd₂Cl₆(H₂O)₂] (3), (H₂mepipz)[Cd₂Cl₆(H₂O)₂]·H₂O (4) and (H₂mepipz)[Cd₂Cl₆] (5) (L = pipz = piperazine, L′ = mepipz = N-ethylpiperazine).     

A Protargol Method for Staining Nerve Fibers in Frozen or Celloidin Sections

Extensive experimentation with protargol staining of neurons in celloidin and frozen sections of organs has resulted in the following technic: Fix tissue in 10% aqueous formalin. Cut celloidin sections IS to 25 μ, frozen sections 25 to 40 μ. Place sections for 24 hours in 50% alcohol to which 1% by volume of NH₄OH has been added. Transfer the sections directly into a 1% aqueous solution of protargol, containing 0.2 to 0.3 g. of electrolytic copper foil which has been coated with a 0.5% solution of celloidin, and allow to stand for 6 to 8 hours at 37° C. Caution: In this and the succeeding step the sections must not be allowed to come in contact with the copper. From aqueous protargol, place the sections for 24 to 48 hours at 37° C. directly into a pyridinated solution of alcoholic protargol (1.0% aqueous solution protargol, 50 ml.; 95% alcohol, 50 ml.; pyridine, 0.5 to 2.0 ml.), containing 0.2 to 0.3 g. of coated copper. Rinse briefly in 50% alcohol and reduce 10 min. in an alkaline hydroquinone reducer (H₃BO₃, 1.4 g.; Na₂SO₃, anhydrous, 2.0 g.; hydroquinone, 0.3 g.; distilled water, 85 cc; acetone, 15 ml.). Wash thoroly in water and tone for 10 min. in 0.2% aqueous gold chloride, acidified with acetic acid. Wash in distilled water and reduce for 1 to 3 min. in 2% aqueous oxalic acid. Quickly rinse in distilled water and treat the sections 3 to 5 min. with 5% aqueous Na₂S₂O₃+5H₂O. Wash in water and stain overnight in Einarson's gallocyanin. Wash thoroly in water and place in 5% aqueous phosphotungstic acid for 30 min. From phosphotungstic acid transfer directly to a dilution (stock solution, 20 ml.; distilled water, 30 ml.) of the following stock staining solution: anilin blue, 0.01 g.; fast green FCF, 0.5 g.; orange G, 2.0 g.; distilled water, 92.0 ml.; glacial acetic acid, 8 ml.) and stain for 1 hour. Differentiate with 70% and 95% alcohol; pass the sections thru butyl alcohol and cedar oil; mount.     

Staining of Nerve Fibers with Methylene Blue Factors Improving the Staining

Several factors influencing the staining of nerve fibers with methylene blue, especially the influence of chloralhydrate and carbamylcholine chloride (as parasympathicotonics), and of some anesthetics were studied. The intestines of mouse, rat, and guinea pig were used. The following immersion technic is suggested: Tissue from animals anesthetised by chloralhydrate is immersed in: zinc free methylene blue, 0.03%; sodium tartrate, 0.5%; sodium pyruvate, 0.05% carbamylcholine, 0.00005%; 0.2 M Na₂HPO₄, 0.77%; 0.1 M citric acid, 0.18%; NACl, 0.79%; also an anesthetic which varies with the animal selected. Air is kept bubbling through the staining solution and microscopic examination is made at 6 min. intervals. After 0.5-1 hr. the tissue is fixed in: ammonium molyb-date, 10 g.; sucrose, 35 g.; distilled water, 100 ml.; to which is added just before use, 1% platinum chloride, 3 ml.; 2% osmic acid, 3 drops. Washing is in ice cold water and dehydration at 0°C. in Lang's fluids (varying mixtures of ethanol and n-butanol). The tissues thus prepared are stored in liquid paraffin.