Surface Plasmon Enhancement at a Liquid–Metal–Liquid Interface

Herein, we report the first experimental demonstration of surface plasmon enhancement at a liquid–metal–liquid interface using a pseudo-Kretschmann geometry. Pumping gold nanoparticle clusters at the interface of a p-xylene–water mixture, we were able to measure a fluorescence enhancement of three orders of magnitude in Rose Bengal at an excitation wavelength of 532 nm. The observed increase is due to the local electric field enhancement and the reduction of the fluorescence lifetime of dye molecules in the close vicinity of the metal surface. Theoretical modeling using the T-matrix method of the electric field intensity enhancement of emulated surfaces supports the experimental results. This new approach will open a new road for the study of dynamic systems using plasmonics.     

Application of a Novel Oscillatory Flow Micro-bioreactor to the Production of γ-decalactone in a Two Immiscible Liquid Phase Medium

A novel micro-bioreactor based on the oscillatory flow technology was applied to the scale-down of the biotechnological production of γ-decalactone. A decrease up to 50% of the time required to obtain the maximum concentration of the compound was observed, when compared with other scaled-down platforms (stirred tank bioreactor or shake flask). A three-fold increase in γ-decalactone productivity was obtained by increasing oscillatory mixing intensity from Re_o ~482 to Re_o ~1447. This was presumably related to the effective contribution of the reactor geometry to enhanced mass transfer rates between the two immiscible liquid phases involved in the process by increasing the interfacial area. Revisions requested 11 October 2005; Revisions received 4 January 2006     

Controlling Liquid–Liquid Phase Separation of Cold-Adapted Crystallin Proteins from the Antarctic Toothfish

Liquid–liquid phase separation (LLPS) of proteins is important to a variety of biological processes both functional and deleterious, including the formation of membraneless organelles, molecular condensations that sequester or release molecules in response to stimuli, and the early stages of disease-related protein aggregation. In the protein-rich, crowded environment of the eye lens, LLPS manifests as cold cataract. We characterize the LLPS behavior of six structural γ-crystallins from the eye lens of the Antarctic toothfish Dissostichus mawsoni, whose intact lenses resist cold cataract in subzero waters. Phase separation of these proteins is not strongly correlated with thermal stability, aggregation propensity, or cross-species chaperone protection from heat denaturation. Instead, LLPS is driven by protein–protein interactions involving charged residues. The critical temperature of the phase transition can be tuned over a wide temperature range by selective substitution of surface residues, suggesting general principles for controlling this phenomenon, even in compactly folded proteins.     

Purification of Xylitol from Fermented Hemicellulosic Hydrolyzate Using Liquid–Liquid Extraction and Precipitation Techniques

Xylitol was produced by Candida guilliermondii by fermentation of sugarcane bagasse hemicellulosic hydrolysate. Undesirable impurities were extracted from the broth using either ethyl acetate, chloroform or dichloromethane. The best results on clarification of the broth without xylitol loss were obtained with ethyl acetate. When ethanol, acetone or tetrahydrofuran were used for precipitation of impurities, only tetrahydrofuran clarified the fermented broth, but a high xylitol loss (~30%) was observed.     

Enhanced Biotransformation of 2-Phenylethanol with Ethanol Oxidation in a Solid–Liquid Two-Phase System by Active Dry Yeast

2-Phenylethanol (2-PE) can be produced from l-phenylalanine (l-Phe) with the oxidation degradation of ethanol by active dry yeast. In this study, the catalysis effect of ethanol on biotransforming l-Phe into 2-PE by yeast was evaluated and optimized. The results indicated that increasing ethanol concentration was beneficial for enhancing 2-PE concentration but lowered the 2-PE productivity. Initial ethanol concentration above 25 g/l could strongly inhibit the 2-PE production. To obtain 2-PE with desirable concentrations with an economical operation mode, three fed-batch biotransformation operation methods using ethanol or/and glucose were carried out in a solid–liquid two-phase system. When using ethanol alone with the initial concentration of 10 g/l, the total concentration and overall productivity of 2-PE were 7.6 g/l and 0.065 g l⁻¹ h⁻¹, respectively. Furthermore, an experiment with controlled glucose solely (higher than 2 g/l) was finished. In this case, phenylacetaldehyde (PA) was detected along with ethanol accumulation, suggesting that reaction of PA → 2-PE in Ehrlich pathway was inhibited. To further enhance 2-PE production by using glucose only, a novel operation strategy to simultaneously control rates of glucose glycolysis and ethanol oxidative degradation with the aid of ISPR techniques was developed. With this strategy, 2-PE concentration and yield based on glucose consumption reached a higher level of 14.8 g/l and 0.12 g-PE/g-glucose, respectively, and these are the highest values reported up to date with the fed-batch biotransformation operation mode.     

Study of Caprine β-casein using Reversed-phase High-performance Liquid Chromatography and Mass Spectroscopy: Identification of a New Genetic Variant

The genotypes and the main phosphorylation levels of β-casein of goat milk were studied using RP-HPLC/ESI-MS. A new variant of caprine β-casein named E has been characterized using RP-HPLC/ESI-MS, MALDI-MS and NanoESI MS/MS methods. Its sequence differed from that of variant A in the mono amino acid substitution D47 → Y47, which resulted in a 48 Da experimental mass difference between them. The calculated molecular mass of the new variant E 6 P was estimated as 23,869 Da. Its phosphorylation pattern was similar to that of variant A, the most abundant types being those with 5 and 6 P in similar quantities.     

Liquid chromatography–fluorescence and liquid chromatography–mass spectrometry detection of tryptophan degradation products of a recombinant monoclonal antibody

Light exposure is one of several conditions used to study the degradation pathways of recombinant monoclonal antibodies. Tryptophan is of particular interest among the 20 amino acids because it is the most photosensitive. Tryptophan degradation forms several products, including an even stronger photosensitizer and several reactive oxygen species. The current study reports a specific peptide mapping procedure to monitor tryptophan degradation. Instead of monitoring peptides using UV 214 nm, fluorescence detection with an excitation wavelength of 295 nm and an emission wavelength of 350 nm was used to enable specific detection of tryptophan-containing peptides. Peaks that decreased in area over time are likely to contain susceptible tryptophan residues. This observation can allow further liquid chromatography–mass spectrometry (LC–MS) analysis to focus only on those peaks to confirm tryptophan degradation products. After confirmation of tryptophan degradation, susceptibility of tryptophan residues can be compared based on the peak area decrease.     

Development of Dispersive Liquid–Liquid Microextraction Based on Solidification of Floating Organic Drop for the Determination of Trace Nickel

A liquid-phase microextraction technique was developed using dispersive liquid-liquid microextraction based on solidification of floating organic drop combined with flame atomic absorption spectrometry, for the extraction and determination of trace amounts of nickel in water samples. Microextraction efficiency factors, such as the type and volume of extraction and dispersive solvents, pH, extraction time, the chelating agent amount, and ionic strength, were investigated and optimized. Under optimum conditions, the calibration graph was linear in the range of 4.23-250?μg?L(-1) with a detection limit of 1.27?μg?L(-1). The relative standard deviation for ten replicate measurements of 10 and 100?μg?L(-1) of nickel were 3.21% and 2.55%, respectively. The proposed method was assessed through the analysis of certified reference water or recovery experiments.     

Production of Fumonisins by Fusarium Verticillioides Strains on Solid and in a Defined Liquid Medium — Effects of L-Methionine and Inoculum

In order to evaluate the toxicological and carcinogenic effects of fumonisins, large amounts of fumonisins need to be purified, which requires optimal conditions for production in culture. Five strains of F. verticillioides were compared for their ability to produce fumonisins in solid and liquid media with and without the addition of methionine, a fumonisin precursor. Inoculations were made either with lyophilized cultures or a concentrated inoculum. Growth in liquid medium, measured by biomass, was directly correlated to total fumonisin production when a lyophilized inoculum was used. Fumonisin production was stimulated by the addition of 0.2% L-methionine to solid media for most strains. Levels ranged from 1500-3900 mg/kg in rice, and 2900-12500 mg/kg in maize cultures inoculated with lyophilized cultures; 200-4800 mg/kg in rice, and 1500-4200 mg/kg in maize cultures inoculated with concentrated inoculum. Strains that produced relatively high levels of fumonisins in solid media did not necessarily do so in liquid medium and vice versa. Total fumonisin levels in liquid medium ranged from 40-590 mg/l inoculated with lyophilized cultures and < 1-110 mg/l inoculated with concentrated inoculum, without adding the precursor. F. verticillioides strains therefore varied in their ability to produce fumonisins, and conditions for production need to be optimized individually for each strain.     

Destruction of Enteric Bacteria in Liquid Egg with β-Propiolactone

Liquid whole egg or egg white, inoculated with Escherichia coli 1485, Salmonella senftenberg ATCC 8400, or Salmonella typhimurium 84-I, was treated with concentrations of β-propiolactone ranging from 0.05 to 0.3%. Egg white containing 1 × 10³ to 1 × 10⁶ cells of E. coli 1485 per ml was sterilized in 1 hr at 27 C by lactone concentrations of 0.2 and 0.3%. Egg white containing 1 × 10⁵ cells of S. senftenberg ATCC 8400 per ml was sterilized in 12 hr at 10 C by 0.1% lactone and in 2 to 3 hr by 0.3% lactone at the same temperature.

Liquid whole egg inoculated with 1 × 10⁵ cells of either species of Salmonella was sterilized in 4 to 5 hr at 10 C with 0.2% lactone or in 2 to 3 hr by 0.3% lactone at this temperature. A mild heat treatment of either 15 min at 37 C or 1 min at 55 C markedly shortened the exposure times required for sterilization by β-propiolactone at 10 C.

After disinfection was complete, the lactone-treated liquid whole egg was reinoculated with low cell numbers of either species of Salmonella to determine the presence of residual lactone or toxic products. Liquid whole egg treated with 0.2% lactone would support the growth of salmonellae after 13 to 14 hr at 10 C. A heat treatment of 45 min at 37 C or 10 min at 55 C immediately after addition of 0.2% lactone allowed growth of the salmonellae in the lactone-treated liquid whole egg. No evidence of residual toxicity from the lactone treatment was found.

The amount of lactone needed to prevent the outgrowth of low cell numbers of either strain of Salmonella in liquid whole egg was quantitated. Liquid whole egg containing 0.06 to 0.07% lactone would not support salmonellae growth from inocula of 1 to 10 cells per ml of egg. Lactone concentrations above 0.08% prevented outgrowth of salmonellae inocula of 10 to 200 cells per ml of liquid whole egg.

     

Liquid chromatography–mass spectrometry in forensic and clinical toxicology

This paper reviews liquid chromatographic–mass spectrometric (LC–MS) procedures for the identification and/or quantification of drugs of abuse, therapeutic drugs, poisons and/or their metabolites in biosamples (whole blood, plasma, serum, urine, cerebrospinal fluid, vitreous humor, liver or hair) of humans or animals (cattle, dog, horse, mouse, pig or rat). Papers published from 1995 to early 1997, which are relevant to clinical toxicology, forensic toxicology, doping control or drug metabolism and pharmacokinetics, were taken into consideration. They cover the following analytes: amphetamines, cocaine, lysergide (LSD), opiates, anabolics, antihypertensives, benzodiazepines, cardiac glycosides, corticosteroids, immunosuppressants, neuroleptics, non-steroidal anti-inflammatory drugs (NSAID), opioids, quaternary amines, xanthins, biogenic poisons such as aconitines, aflatoxins, amanitins and nicotine, and pesticides. LC–MS interface types, mass spectral detection modes, sample preparation procedures and chromatographic systems applied in the reviewed papers are discussed. Basic information about the biosample assayed, work-up, LC column, mobile phase, interface type, mass spectral detection mode, and validation data of each procedure is summarized in tables. Examples of typical LC–MS applications are presented.     

Combined Liquid Chromatography–Tandem Mass Spectrometry Analysis of Progesterone Metabolites

Progesterone has a number of important functions throughout the human body. While the roles of progesterone are well known, the possible actions and implications of progesterone metabolites in different tissues remain to be determined. There is a growing body of evidence that these metabolites are not inactive, but can have significant biological effects, as anesthetics, anxiolytics and anticonvulsants. Furthermore, they can facilitate synthesis of myelin components in the peripheral nervous system, have effects on human pregnancy and onset of labour, and have a neuroprotective role. For a better understanding of the functions of progesterone metabolites, improved analytical methods are essential. We have developed a combined liquid chromatography—tandem mass spectrometry (LC-MS/MS) method for detection and quantification of progesterone and 16 progesterone metabolites that has femtomolar sensitivity and good reproducibility in a single chromatographic run. MS/MS analyses were performed in positive mode and under constant electrospray ionization conditions. To increase the sensitivity, all of the transitions were recorded using the Scheduled MRM algorithm. This LC-MS/MS method requires small sample volumes and minimal sample preparation, and there is no need for derivatization. Here, we show the application of this method for evaluation of progesterone metabolism in the HES endometrial cell line. In HES cells, the metabolism of progesterone proceeds mainly to (20S)-20-hydroxy-pregn-4-ene-3-one, (20S)-20-hydroxy-5α-pregnane-3-one and (20S)-5α-pregnane-3α,20-diol. The investigation of possible biological effects of these metabolites on the endometrium is currently undergoing.     

Liquid media development for Heterorhabditis bacteriophora : lipid source and concentration

Lipids are important entomopathogenic nematode nutritional components because they are energy reserves and serve as indicators of nematode quality. The composition and concentration of the media lipid component determine bacterial and nematode yields. Heterorhabditis bacteriophora and its symbiont, Photorhabdus luminescens, were cultured in media containing various lipid sources. As lipid concentration increased from 2.5% to 8.0% (w/v), the final yield and productivity [calculated from the number of infective juveniles (IJ)] increased significantly from 2.1 × 10⁵IJ ml⁻¹ to 2.8 × 10⁵IJ ml⁻¹ (P < 0.05) and from 8.9 × 10⁵IJ l⁻¹ day⁻¹ to 11.8 × 10⁵ IJ l⁻¹day⁻¹ (P < 0.05), respectively. The nematode yield coefficient (IJ per gram of media), however, decreased from 2.8 × 10⁶ to 2.2 × 10⁶ (P < 0.05), while recovery increased from 45.3% to 58.0% (P < 0.05). Bacterial cell mass remained constant at 4.6 mg ml⁻¹ with changing lipid content (P > 0.05). The largest nematode yield (2.8 × 10⁵IJ ml⁻¹) was achieved within 8 days, using a medium containing an 8% (w/v) olive and canola oil (50:50 w/v) combination. Moreover, developmental synchrony was achieved in this medium with 96% infective juveniles. In short, lipid sources rich in mono-unsaturated fatty acids and poor in saturated fatty acids produced optimal nematode growth. Received: 1 May 2000 / Received revision: 17 July 2000 / Accepted: 27 July 2000     

Development and Validation of a High-Performance Liquid Chromatography–Tandem Mass Spectrometry Method for the Simultaneous Determination of Irinotecan and Its Main Metabolites in Human Plasma and Its Application in a Clinical Pharmacokinetic Study

Irinotecan is currently used in several cancer regimens mainly in colorectal cancer (CRC). This drug has a narrow therapeutic range and treatment can lead to side effects, mainly neutropenia and diarrhea, frequently requiring discontinuing or lowering the drug dose. A wide inter-individual variability in irinotecan pharmacokinetic parameters and pharmacodynamics has been reported and associated to patients’ genetic background. In particular, a polymorphism in the UGT1A1 gene (UGT1A1*28) has been linked to an impaired detoxification of SN-38 (irinotecan active metabolite) to SN-38 glucuronide (SN-38G) leading to increased toxicities. Therefore, therapeutic drug monitoring of irinotecan, SN-38 and SN-38G is recommended to personalize therapy. In order to quantify simultaneously irinotecan and its main metabolites in patients’ plasma, we developed and validated a new, sensitive and specific HPLC–MS/MS method applicable to all irinotecan dosages used in clinic. This method required a small plasma volume, addition of camptothecin as internal standard and simple protein precipitation. Chromatographic separation was done on a Gemini C18 column (3 μM, 100 mm x 2.0 mm) using 0.1% acetic acid/bidistilled water and 0.1% acetic acid/acetonitrile as mobile phases. The mass spectrometer worked with electrospray ionization in positive ion mode and selected reaction monitoring. The standard curves were linear (R² ≥0.9962) over the concentration ranges (10–10000 ng/mL for irinotecan, 1–500 ng/mL for SN-38 and SN-38G and 1–5000 ng/mL for APC) and had good back-calculated accuracy and precision. The intra- and inter-day precision and accuracy, determined on three quality control levels for all the analytes, were always <12.3% and between 89.4% and 113.0%, respectively. Moreover, we evaluated this bioanalytical method by re-analysis of incurred samples as an additional measure of assay reproducibility. This method was successfully applied to a pharmacokinetic study in metastatic CRC patients enrolled in a genotype-guided phase Ib study of irinotecan administered in combination with 5-fluorouracil/leucovorin and bevacizumab.