Biodegradability of polymers in the environment: complexities and significance of definitions and measurements.

There is a world-wide research effort to develop biodegradable polymers as a waste-management option for polymers in the environment. This effort may prove to be fruitless unless we can agree on a definition and test protocols--what do we expect biodegradable polymers to do in the environment and how do we demonstrate that they do what we expect? Establishing a definition and test protocols is not trivial; the task is made complex by the wide range of disciplines involved directly in or interested in the subject, including polymer scientists, biochemists, environmentalists, legislators, and laypeople, all with their own perspectives and expectations. In this paper, I present arguments in favor of biodegradable polymers and indicate what remains to be done to satisfy detractors that they represent a viable option for polymer waste-management.     

Biological degradation of plastics: a comprehensive review

Lack of degradability and the closing of landfill sites as well as growing water and land pollution problems have led to concern about plastics. With the excessive use of plastics and increasing pressure being placed on capacities available for plastic waste disposal, the need for biodegradable plastics and biodegradation of plastic wastes has assumed increasing importance in the last few years. Awareness of the waste problem and its impact on the environment has awakened new interest in the area of degradable polymers. The interest in environmental issues is growing and there are increasing demands to develop material which do not burden the environment significantly. Biodegradation is necessary for water-soluble or water-immiscible polymers because they eventually enter streams which can neither be recycled nor incinerated. It is important to consider the microbial degradation of natural and synthetic polymers in order to understand what is necessary for biodegradation and the mechanisms involved. This requires understanding of the interactions between materials and microorganisms and the biochemical changes involved. Widespread studies on the biodegradation of plastics have been carried out in order to overcome the environmental problems associated with synthetic plastic waste. This paper reviews the current research on the biodegradation of biodegradable and also the conventional synthetic plastics and also use of various techniques for the analysis of degradation in vitro.     

Chitosan: An option for development of essential oil delivery systems for oral cavity care?

Microencapsulation of bioactive compounds has received increased attention in the last decade. Among the polymers used for developing microparticulated systems, chitosan has been widely cited. Obtained by deacetylation of chitin, chitosan is a natural, biodegradable, biocompatible and mucoadhesive polymer with permeability enhancement properties. These data justify its use for overcoming the reduced efficacy of conventional treatments of oral diseases. Various tests simulating the buccal environment have described controlled drug release profile and significant activity against buccal pathogens by chitosan microparticles entrapping antimicrobial agents. Considering the increasing microbial resistance to conventional antibiotics, essential oils have shown to be an important option against these pathogens. For sustained stability and prolonged release of essential oils from pharmaceutical formulations, some authors have studied the association of chitosan to them. This review disserts about the application of chitosan and essential oils on oral cavity care pointing out their association may be an interesting option.     

7 The Molecular Biology of Tryptophan Synthase: A Model for Protein–Protein Interaction

Abstract

The use of plastic produced from non-renewable resources constitutes a major environmental problem of the modern society. Polylactide polymers (PLA) have recently gained enormous attention as one possible substitution of petroleum derived polymers. A prerequisite for high quality PLA production is the provision of optically pure lactic acid, which cannot be obtained by chemical synthesis in an economical way. Microbial fermentation is therefore the commercial option to obtain lactic acid as monomer for PLA production. However, one major economic hurdle for commercial lactic acid production as basis for PLA is the costly separation procedure, which is needed to recover and purify the product from the fermentation broth. Yeasts, such as Saccharomyces cerevisiae (bakers yeast) offer themselves as production organisms because they can tolerate low pH and grow on mineral media what eases the purification of the acid. However, naturally yeasts do not produce lactic acid. By metabolic engineering, ethanol was exchanged with lactic acid as end product of fermentation. A vast amount of effort has been invested into the development of yeasts for lactic acid production since the first paper on this topic by Dequin and process insight. If pH stress is used as basis for DNA microarray analyses, in order to improve the host, what exactly is addressed? Growth? Or productivity? They might be connected, but can be negatively correlated. A better growing strain might not be a better producer. So if the question was growth, the answer might not be what was initially intended (productivity).

A major task for the future is to learn to ask the right questions – a lot of studies intended to lead to better productivity, did lead to interesting results, but NOT to better production strains.

Taking together what we learned from lactic acid production with yeasts, we see a bright future for bulk and fine chemical production with these versatile hosts.     

Non-biodegradable biopolymers from renewable resources: perspectives and impacts

In recent years the biotechnological production of bulk biopolymers has focused on the synthesis of biodegradable polymers to replace their non-biodegradable counterparts derived from fossil resources. Examples include polyhydroxyalkanoates and polylactic acid, which act as substitutes for polyolefins. By contrast, the biotechnological production of non-biodegradable polymers from renewable resources has so far been scarcely considered, probably because this idea contradicts the paradigm that all natural compounds are biodegradable. Polythioesters, which were recently described as new biopolymers, do not follow this paradigm because although they are produced by bacteria, they are persistent to microbial degradation. Mankind has a need for both non-biodegradable and biodegradable polymers and methods to produce them from renewable resources will be of great value.     

Hydrolytic Degradation of Poly(3-Hydroxybutyrate) and Its Copolymer with 3-Hydroxyvalerate of Different Molecular Weights in vitro

The hydrolytic degradation of polymer films of poly(3-hydroxybutyrate) of different molecular weights and its copolymers with 3-hydroxyvalerate (9 mol % 3-hydroxyvalerate in the poly(3-hydroxybutyrate) chain) of different molecular weights was studied in model conditions in vitro. The changes in the physicochemical properties of the polymers were investigated using different analytical techniques: viscometry, differential scanning calorimetry, gravimetrical method, and water contact angle measurement for polymers. The data showed that in a period of 6 months the weight of polymer films decreased insignificantly. The molecular weight of the samples was reduced significantly; the largest decline (up to 80% of the initial molecular weight of the polymer) was observed in the high-molecular-weight poly(3-hydroxybutyrate). The surface of all investigated polymers became more hydrophilic. In this work, we focus on a mathematical model that can be used for the analysis of the kinetics of hydrolytic degradation of poly(3-hydroxyaklannoate)s by noncatalytic and autocatalytic hydrolysis mechanisms. It was also shown that the degree of crystallinity of some polymers changes differently during degradation in vitro. Thus, the studied polymers can be used to develop biodegradable medical devices such that they can perform their functions for a long period of time.     

Synthesis and characterization of biodegradable peptide-based polymers prepared by microwave-assisted click chemistry

In this study, the microwave-assisted copper(I)-catalyzed 1,3-dipolar cycloaddition reaction was used to synthesize peptide triazole-based polymers from two novel peptide-based monomers: azido-phenylalanyl-alanyl-lysyl-propargyl amide (1) and azido-phenylalanyl-alanyl-glycolyl-lysyl-propargyl amide (2). The selected monomers have sites for enzymatic degradation as well as for chemical hydrolysis to render the resulting polymer biodegradable. Depending on the monomer concentration in DMF, the molecular mass of the polymers could be tailored between 4.5 and 13.9 kDa (corresponding with 33-100 amino acid residues per polymer chain). As anticipated, both polymers can be enzymatically degraded by trypsin and chymotrypsin, whereas the ester bond in the polymer of 2 undergoes chemical hydrolysis under physiological conditions, as was shown by a ninhydrin-based colorimetric assay and MALDI-TOF analysis. In conclusion, the microwave-assisted copper(I)-catalyzed 1,3-dipolar cycloaddition reaction is an effective tool for synthesizing biodegradable peptide polymers, and it opens up new approaches toward the synthesis of (novel) designed biomedical materials.     

Fungal degradation of carbohydrate-linked polystyrenes

A series of carbohydrate molecules like glucose, sucrose and lactose were linked to maleic anhydride functionalized polystyrene by polymer analogous reactions to produce biodegradable polymers. Pure culture system was used for evaluating the biodegradability of these sugar linked polystyrene-maleic anhydride copolymers by known fungal test organisms. Weight loss measurements after fungal treatment confirmed the biodegradability of the carbohydrate-linked polymers, and it was observed that the degree of susceptibility to degradation varied with the type of test organism as well as with the type of sugar. FTIR spectra confirmed the degradation of the polymer.     

Fungal bioremediation of polyethylene: Challenges and perspectives

Plastics have become ubiquitous in both their adoption as materials and as environmental contaminants. Widespread pollution of these versatile, man-made and largely petroleum-derived polymers has resulted from their long-term mass production, inappropriate disposal and inadequate end of life management. Polyethylene (PE) is at the forefront of this problem, accounting for one-third of plastic demand in Europe in part due to its extensive use in packaging. Current recycling and incineration processes do not represent sustainable solutions to tackle plastic waste, especially once it becomes littered, and the development of new waste-management and remediation technologies are needed. Mycoremediation (fungal-based biodegradation) of PE has been the topic of several studies over the last two decades. The utility of these studies is limited by an inconclusive definition of biodegradation and a lack of knowledge regarding the biological systems responsible. This review highlights relevant features of fungi as potential bioremediation agents, before discussing the evidence for fungal biodegradation of both high- and low-density PE. An up-to-date perspective on mycoremediation as a future solution to PE waste is provided.     

Effect of crowding on protein-protein association rates: fundamental differences between low and high mass crowding agents

Physiological media constitutes a crowded environment that serves as the field of action for protein-protein interaction in vivo. Measuring protein-protein interaction in crowded solutions can mimic this environment. In this work we follow the process of protein-protein association and its rate constants (k(on)) of the beta-lactamase (TEM)-beta-lactamase inhibitor protein (BLIP) complex in crowded solution using both low and high molecular mass crowding agents. In all crowded solutions (0-40% (w/w) of ethylene glycol (EG), poly(ethylene glycol) (PEG) 200, 1000, 3350, 8000 Da Ficoll-70 and Haemaccel the measured absolute k(on), but not k(off) values, were found to be slower as compared to buffer. However, there is a fundamental difference between low and high mass crowding agents. In the presence of low mass crowding agents and Haemaccel k(on) depends inversely on the solution viscosity. In high mass polymer solutions k(on) changes only slightly, even at viscosities 12-fold higher than water. The border between low and high molecular mass polymers is sharp and is dictated by the ratio between the polymer length (L) and its persistence length (Lp). Polymers that are long enough to form a flexible coil (L/Lp > 2) behave as high molecular mass polymers and those who are unable to do so (L/Lp < 2) behave as low molecular mass polymers. We concluded that although polymers solution are crowded, this property is not uniform; i.e. there are areas in the solution that contain bulk water, and in these areas proteins can diffuse and associate almost as if they were in diluted environment. This porous medium may be taken as mimicking some aspects of the cellular environment, where many of the macromolecules are organized along membranes and the cytoskeleton. To determine the contribution of electrostatic attraction between proteins in crowded milieu, we followed k(on) of wt-TEM and three BLIP analogs with up to 100-fold increased values of k(on) due to electrostatic steering. Faster associating BLIP variants keep their relative advantage in all crowded solutions, including Haemaccel. This result suggests that faster associating protein complexes keep their advantage also in complex environment.     

Comparison of the synthetic biodegradable polymers, polylactide (PLA), and polylactic-co-glycolic acid (PLGA) as scaffolds for artificial cartilage

Chondrocytes are easily de-differentiated when cultured in monolayer, and tissue-engineered cartilage can be generated by seeding chondrocytes onto three-dimensional porous synthetic biodegradable polymers. In this study, we investigated the biochemical and molecular aspects of chondrocytes in a monolayer-culture system and selected the optimal subculture passages based on their de-differentiation. We also compared two commonly used synthetic biodegradable polymers, polylactide (PLA), and polylactic-co-glycolic acid (PLGA), for their suitability as scaffolds for artificial cartilage. De-differentiated chondrocytes were observed after two passages. These results suggested that the first cell passage was optimal for seeding as only a few chondrocytes secreted extracellular matrix components to form homogeneously compact cartilage. Substantially increased glycosaminoglycan and total collagen levels revealed that PLGA scaffolds were a better option for inducing cartilage tissue formation compared to the PLA scaffolds. Histological and immunohistochemical results showed that chondrocytes seeded into PLGA retained their morphological phenotype to a greater extent than those seeded into PLA.     

Synthesis and characterization of poly (amino ester) for slow biodegradable gene delivery vector

Many therapeutic carrier materials were exploited for human gene therapy from viral to polymeric vectors. This research describes the evaluation of two biodegradable ester-bonded polymers synthesized by double-monomer polycondensation for a non-viral cationic polymer-based gene delivery system. The backbone was constructed to include inner tertiary amines and outer primary amines. Self-assembly with DNA resulted in the production of regularly nano-sized spherical polyplexes with good transfection efficiency, especially in the presence of serum. The polymers showed a relatively slow degradability for an amine-containing ester polymer, as they maintained DNA/polymer complex for 7 days in physiological buffer conditions. Finally, the low toxicity and slow degradation concluded these polymers reliable for long-term therapeutic applications.     

Role of solvent properties of aqueous media in macromolecular crowding effects

Analysis of the macromolecular crowding effects in polymer solutions show that the excluded volume effect is not the only factor affecting the behavior of biomolecules in a crowded environment. The observed inconsistencies are commonly explained by the so-called soft interactions, such as electrostatic, hydrophobic, and van der Waals interactions, between the crowding agent and the protein, in addition to the hard nonspecific steric interactions. We suggest that the changes in the solvent properties of aqueous media induced by the crowding agents may be the root of these “soft” interactions. To check this hypothesis, the solvatochromic comparison method was used to determine the solvent dipolarity/polarizability, hydrogen-bond donor acidity, and hydrogen-bond acceptor basicity of aqueous solutions of different polymers (dextran, poly(ethylene glycol), Ficoll, Ucon, and polyvinylpyrrolidone) with the polymer concentration up to 40% typically used as crowding agents. Polymer-induced changes in these features were found to be polymer type and concentration specific, and, in case of polyethylene glycol (PEG), molecular mass specific. Similarly sized polymers PEG and Ucon producing different changes in the solvent properties of water in their solutions induced morphologically different α-synuclein aggregates. It is shown that the crowding effects of some polymers on protein refolding and stability reported in the literature can be quantitatively described in terms of the established solvent features of the media in these polymers solutions. These results indicate that the crowding agents do induce changes in solvent properties of aqueous media in crowded environment. Therefore, these changes should be taken into account for crowding effect analysis.     

Microbial degradation of natural and of new synthetic polymers

Abstract In landfills, deposited waste material is usually faced with strictly anoxic conditions. This means that the design of new biodegradable polymers must take into consideration that degradation should be possible especially in the absence of molecular oxygen. Poly-β-hydroxybutyrate is depolymerized by the anaerobic fermenting bacterium Ilyobacter delafieldii through an extracellular hydrolase. Monomers are degraded inside the cells through classical β-oxidation. Polyalkanoates containing odd-numbered or branched-chain acid monomers should he degraded in an analogous manner; in most cases the final mineralization of these residues requires special pathways. A comparison of the chemistry of natural polymer biodegration leads to the conclusion that synthetic biodegradable polymers should be designed in the future to contain linkages which can be cleaved by extracellular hydrolytic enzymes. Recent findings on aerobic and anaerobic bacterial degradation of synthetic polyethers suggest that natural evolution of new depolymerizing enzymes, perhaps from existing hydrolases, could be possible in a reasonable amount of time, provided that the monomers are likely energy sources for a broad variety of microbes.     

Microbial degradation of natural and of new synthetic polymers.

In landfills, deposited waste material is usually faced with strictly anoxic conditions. This means that the design of new biodegradable polymers must take into consideration that degradation should be possible especially in the absence of molecular oxygen. Poly-beta-hydroxybutyrate is depolymerized by the anaerobic fermenting bacterium Ilyobacter delafieldii through an extracellular hydrolase. Monomers are degraded inside the cells through classical beta-oxidation. Polyalkanoates containing odd-numbered or branched-chain acid monomers should he degraded in an analogous manner; in most cases the final mineralization of these residues requires special pathways. A comparison of the chemistry of natural polymer biodegradation leads to the conclusion that synthetic biodegradable polymers should be designed in the future to contain linkages which can be cleaved by extracellular hydrolytic enzymes. Recent findings on aerobic and anaerobic bacterial degradation of synthetic polyethers suggest that natural evolution of new depolymerizing enzymes, perhaps from existing hydrolases, could be possible in a reasonable amount of time, provided that the monomers are likely energy sources for a broad variety of microbes.     

Functionalized synthetic biodegradable polymer scaffolds for tissue engineering

Scaffolds (artificial ECMs) play a pivotal role in the process of regenerating tissues in 3D. Biodegradable synthetic polymers are the most widely used scaffolding materials. However, synthetic polymers usually lack the biological cues found in the natural extracellular matrix. Significant efforts have been made to synthesize biodegradable polymers with functional groups that are used to couple bioactive agents. Presenting bioactive agents on scaffolding surfaces is the most efficient way to elicit desired cell/material interactions. This paper reviews recent advancements in the development of functionalized biodegradable polymer scaffolds for tissue engineering, emphasizing the syntheses of functional biodegradable polymers, and surface modification of polymeric scaffolds.     

Functional and biodegradable dendritic macromolecules with controlled architectures as nontoxic and efficient nanoscale gene vectors

Gene therapy has provided great potential to revolutionize the treatment of many diseases. This therapy is strongly relied on whether a delivery vector efficiently and safely directs the therapeutic genes into the target tissue/cells. Nonviral gene delivery vectors have been emerging as a realistic alternative to the use of viral analogs with the potential of a clinically relevant output. Dendritic polymers were employed as nonviral vectors due to their branched and layered architectures, globular shape and multivalent groups on their surface, showing promise in gene delivery. In the present review, we try to bring out the recent trend of studies on functional and biodegradable dendritic polymers as nontoxic and efficient gene delivery vectors. By regulating dendritic polymer design and preparation, together with recent progress in the design of biodegradable polymers, it is possible to precisely manipulate their architectures, molecular weight and chemical composition, resulting in predictable tuning of their biocompatibility as well as gene transfection activities. The multifunctional and biodegradable dendritic polymers possessing the desirable characteristics are expected to overcome extra- and intracellular obstacles, and as efficient and nontoxic gene delivery vectors to move into the clinical arena.     

WHAT IS IT TO BE A DAUGHTER? IDENTITIES UNDER PRESSURE IN DEMENTIA CARE

This article concentrates on the care for people who suffer from progressive dementia. Dementia has a great impact on a person’s well‐being as well as on his or her social environment. Dealing with dementia raises moral issues and challenges for participants, especially for family members. One of the moral issues in the care for people with dementia is centred on responsibilities; how do people conceive and determine their responsibilities towards one another? To investigate this issue we use the theoretical perspective of Margaret Walker. She states that ideas about identity play a crucial role in patterns of normative expectations with regard to the distribution of responsibilities in daily practices of care. The results of this study show how the identity of a family‐member is put under pressure and changes during her loved one’s illness that leads to difficulties and misunderstandings concerning the issue of responsibility. These results offer an insight into the complexities of actual practices of responsibility and highlight the importance for those caring for people with dementia of attending carefully to how they see themselves and how they see other people involved (Who am I? Who do I want to be for the other?). Answers to such questions show what people expect from themselves and from one another, and how they, at any rate, are distributing responsibilities in a given situation. Professional caregivers should take into account that family members might have different ideas about who they are and consequently about what their responsibilities are.     

Modification of materials formed from poly(L-lactic acid) to enable covalent binding of biopolymers: Application to high-density three-dimensional cell culture in foams with attached collagen

Summary We describe a method for increasing the hydrophilicity of materials formed from biodegradable polymers and introducing chemical functional groups on their surfaces. Poly(L-lactic acid) was blended with poly(ɛ-CBZ-L-lysine) at an 80:20 ratio. Films of the mixture were prepared and foams were made by solvent casting and salt leaching. Amino groups on the surface of the polymer mixture were deprotected by acid hydrolysis. As an example of the applicability of the technique for attachment of biomolecules, we covalently linked collagen to the deprotected amino groups, creating a surface capable of high density growth of a differentiated cell type (bovine adrenocortical cells). The method should be generally useful for surface modification of biodegradable polymer materials used in tissue engineering.     

Do we expect natural selection to produce rational behaviour?

We expect that natural selection should result in behavioural rules which perform well; however, animals (including humans) sometimes make bad decisions. Researchers account for these with a variety of explanations; we concentrate on two of them. One explanation is that the outcome is a side effect; what matters is how a rule performs (in terms of reproductive success). Several rules may perform well in the environment in which they have evolved, but their performance may differ in a 'new' environment (e.g. the laboratory). Some rules may perform very badly in this environment. We use the debate about whether animals follow the matching law rather than maximizing their gains as an illustration. Another possibility is that we were wrong about what is optimal. Here, the general idea is that the setting in which optimal decisions are investigated is too simple and may not include elements that add extra degrees of freedom to the situation.