Partial purification and characterization of an inactive precursor of Pseudomonas aeruginosa elastase.

An inactive precursor of the extracellular elastase of Pseudomonas aeruginosa was extensively purified by immunoadsorption chromatography of the soluble bacterial cell fraction on a column of Sepharose coupled to antielastase antibodies. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis of the purified precursor fraction revealed two major protein bands with molecular weights of about 36,000 (P36) and 20,000 (P20) that in the absence of sodium dodecyl sulfate were associated with each other. The following findings identify P36 as the elastase precursor and indicate that proteolytic processing of this molecule is required for activation: (i) P36 is larger than the elastase, and it binds antielastase antibodies; (ii) trypsin activation is associated with the disappearance of P36 and the appearance of a new protein band migrating identically with the elastase and reacting with antibodies against the elastase; (iii) peptide maps generated from P36 and the elastase are similar although not identical. P20 by itself was not recognized by antielastase antibodies. Its association with P36 accounts for its adsorption to the immunoaffinity column and suggests that it may serve in elastase secretion.     

铜绿假单胞菌外毒素A的生产,分离纯化和鉴定

通过对培养基组成、种子活化、接种量和培养条件进行优化,使铜绿假单胞菌外毒素Ａ（ＰＥ）产量达到每毫升５－１０μｇ和１９２小鼠ＬＤ５０,不低于国外报道水平。经二步纯化,ＰＥ蛋白回收率为３３．３３％（ＰＥ）和１６．６７％（ＬＤ５０）,提纯系数为４３８．５（ＰＥ）或２１８．５（ＬＤ５０）,ＳＤＳ－ＰＡＧＥ呈现一条带,相对分子质量为６６０００,琼脂糖扩散鉴定与兔抗ＰＥ产生一条沉淀线,小鼠半数致死量为０．１５     

Lipase of Pseudomonas cepacia for biotechnological purposes: purification,crystallization and characterization

Commercial lipase (triacylglycerol lipase, EC 3.1.1.3) of Pseudomonas cepacia (Amano) has been purified to homogeneity by a single chromatography on phenyl Sepharose. The eluted lipase crystallized spontaneously at 4°C in the eluent, containing 58–69% 2-propanol. The yield of the lipase was 87–100% and the specific activity during the hydrolysis of triolein 5800 U/mg protein. This protein has a molecular weight of 34.1 kDa as analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Its purity was determined by SDS-Page and capillary zone electrophoresis to be ≥ 99%. Immobilization on Sepharose increased its stability in organic solvents. This lipase of P. cepacia differs from that of other Pseudomonas strains in respect of substrate specificity and during crystallization. It exhibits a high stability in organic solvents and supercritical carbon dioxide.     

Expression, purification, and characterization of Pseudomonas aeruginosa SecA

A secA gene from Pseudomonas aeruginosa PAO1 was amplified and expressed in Escherichia coli BL21.19 (secA13) under conditions where E. coli SecA was depleted. The binding of P. aeruginosa SecA (PaSecA) to the SP-Sepharose column was facilitated by ammonium sulfate fractionation but was not necessary for E. coli SecA (EcSecA) as the later bound more efficiently. PaSecA and EcSecA were purified by the single chromatographic step to greater than 98% purity and had a recovery of more than 20 and 40%, respectively, from the soluble fraction. This simple step purification obtained a higher homogeneity than previously reported. Cross-reactivity by immunoblotting showed that the purified PaSecA contained little EcSecA if any. The purified PaSecA is a dimer in solution, as judged by size exclusion chromatography, and is slightly larger than its counterpart EcSecA with an estimated molecular weight of 240 kDa. Further studies by the sedimentation velocity method indicate that PaSecA tends to remain as a monomer in solution. The purified PaSecA possessed ATPase activity; the intrinsic and liposome-stimulated ATPase specific activities of PaSecA were approximately 50% of EcSecA.     

Cloning and characterization of elastase genes from Pseudomonas aeruginosa.

A gene bank was constructed from Pseudomonas aeruginosa PAO1 and used to complement three P. aeruginosa elastase-deficient strains. One clone, pRF1, contained a gene which restored elastase production in two P. aeruginosa isolates deficient in elastase production (PA-E15 and PAO-E105). This gene also encoded production of elastase antigen and activity in Escherichia coli and is the structural gene for Pseudomonas elastase. A second clone, pHN13, contained a 20-kilobase (kb) EcoRI insert which was not related to the 8-kb EcoRI insert of pRF1 as determined by restriction analysis and DNA hybridization. A 2.2-kb SalI-HindIII fragment from pHN3 was subcloned into pUC18, forming pRB1822-1. Plasmid pRB1822-1 restored normal elastolytic activity to PAO-E64, a mutant for elastase activity. Clones derived from pHN13 failed to elicit elastase antigen or enzymatic activity in E. coli.     

Cloning, expression and characterization of recombinant elastase from Pseudomonas aeruginosa in Picha pastoris

The gene lasB from Pseudomonas aeruginosa, which encoded elastase, was cloned and firstly successfully expressed in Pichia pastoris stain KM71 under the control of AOX promoter. The effects on the recombinant elastase activities of different pH, different temperatures and different metal ions were assayed. The full-length gene (1497 bp) encodes a preproenzyme including an N-terminal signal peptide (23 aa), a propeptide (197 aa) and mature elastase (301 aa). The recombinant elastase was secreted into culture supernatants using signal sequence from lasB and showed a single band at about 34 kDa by SDS-PAGE. The recombinant elastase expression hit the highest level of approximately 450 mg/L and the specific elastolytic activity of the recombinant elastase was 130 U/ml, which was approximately 26-fold higher than that of elastase obtained from P. aeruginosa. The optimal temperature and pH of the recombinant elastase was 28 degrees C and 7.4, respectively. The enzyme possessed high resistance to heat, and can be activated by Ca(2+). These enzyme properties suggested that it could be produced in an industrial scale and has the potential to be a commercial enzyme.     

Multidrug transporter MexB of Pseudomonas aeruginosa: overexpression, purification, and initial structural characterization

Structural and functional characterization of the multidrug transporter, MexB, of Pseudomonas aeruginosa is significantly restricted due to a low yield of approximately 0.1 mg/L of culture from natural sources. To facilitate structural studies of this medically important transporter protein, we developed a large-scale system for expression of the genetically engineered recombinant, MexB, in the Escherichia coli cell. Using the system, the eventual yield of MexB attained was about 10mg/L of culture. The optimized purification protocol in the presence of dodecyl beta-D-maltoside allowed isolation of highly homogeneous MexB. The oligomeric state of the protein in detergent solution has been characterized to verify that the native state of the purified protein has been preserved. The molecular mass of the protein-detergent complex was found to be 380-450kDa. The MexB-dodecyl beta-d-maltoside mass ratio was determined to be 1.8 +/- 0.05. Taking into account the monomeric MexB molecular mass deduced from its amino acid sequence (112.8 kDa), we concluded that the purified MexB exists as the homotrimer in the surfactant solution. Circular dichroism analysis of MexB showed dominance of the alpha-helix structures. High yield, homogeneity, and stability of MexB position it as a good candidate for structural and functional characterization.     

Cloning and characterization of elastase structural gene from Pseudomonas aeruginosa IFO 3455

An 8.3 Kb DNA fragment was cloned from Pseudomonas aeruginosa IFO 3455. This fragment-containing Escherichia clone, pEL2, produced a high level of elastase activity. A smaller EcoRI-KpnI fragment was subcloned into pUC118 and E. coli HB101 was transformed with the plasmid. A deletion mutant clone was also constructed in the same bacteria. These deletion mutants were tested for elastase activity and it became clear that the full length of the elastase gene was 1.0-1.3 Kb. DNA sequencing analysis revealed that this DNA fragment contains the DNA sequence coding N-terminal amino acid sequence of the elastase protein.     

Carbamate kinase from Pseudomonas aeruginosa: purification, characterization, physiological role, and regulation.

Pseudomonas aeruginosa PAO1 possessed a carbamate kinase (CKase) distinct from carbamoylphosphate synthetase as well as from a constitutive acetate kinase which also catalyzes the phosphorylation of ADP by carbamoylphosphate. CKase was purified to homogeneity. Polyacrylamide gel electrophoresis of cross-linked CKase in the presence of sodium dodecyl sulfate showed that the enzyme consists of two subunits with identical molecular weights (37,000). The optimal pH of enzyme activity is 7.0. The double-reciprocal plot for carbamoylphosphate was linear at 2 mM ADP, yielding an apparent Km of 5 mM. However, at 0.25 mM ADP, the plot was concave upward, and a Hill plot of the data yielded a coefficient of 1.4. This apparent cooperativity at low ADP concentrations might serve to reduce the extent of catabolism of carbamoylphosphate under growth conditions yielding high energy charge. Experiments on the regulation of synthesis under various growth conditions showed a response to three regulatory signals: CKase was induced to high levels by anaerobiosis, induced to moderate levels by arginine, and repressed by ammonia. Thus, CKase expression is regulated in a manner that allows the enzyme to function as a provider of ammonia under aerobic conditions and of ATP under anaerobic conditions. ATP was an effective inhibitor of CKase activity; this inhibition provides the cell with an effective mechanism for avoiding a futile cycle resulting from the simultaneous operation of CKase and carbamoylphosphate synthetase when cells are grown in the presence of exogenous arginine.     

Pseudomonas aeruginosa elastase and elastolysis revisited: recent developments

With the determination of the three-dimensional structure of elastase and the probable identification of the active site and key residues involved in proteolytic activity, our knowledge of the molecular details of this interesting protease is rapidly increasing. Pseudomonas elastase appears to be remarkably similar to the Bacillus metalloproteinase thermolysin. A further significant development has been the discovery of the lasA gene and the fact that Pseudomonas elastase and alkaline proteinase appear to act in concert with the LasA protein to display the notable elastolytic activity exhibited by isolates of this organism. Biochemical and genetic studies indicate that LasA is a second elastase which may be an important virulence factor that has been overlooked in previous studies.     

Elastolytic activity of Pseudomonas aeruginosa elastase

Elastolysis of insoluble elastin by Pseudomonas aeruginosa elastase was found to be less specific (higher apparent Km value) but more active (higher activity) than with pancreatic elastase. Furthermore, pancreatic and P. aeruginosa elastases act synergistically during the initial stages of elastolysis. After extensive hydrolysis, the size distribution of digestion products was lower with P. aeruginosa than with pancreatic elastase. The higher extent of hydrolysis may be explained by the fact that, if pancreatic elastase needs at least six sub-sites for activity, P. aeruginosa elastase may hydrolyse tetrapeptides such as tetraalanine, or synthetic substrates such as furylacryloyltripeptides FA-X-Leu-Y, X and Y being Gly and/or Ala.     

Phytases: microbial sources,production, purification,and potential biotechnological applications

The review deals with phytase-producing microorganisms along with optimum conditions for its production. Various methods used for purifying phytases and their characteristics are discussed. Heterologous gene expression, cost-effective large-scale phytase production, and various biotechnological applications of the enzyme in animal feed and food industries are also discussed.     

Isolation and characterization of Pseudomonas aeruginosa PAO mutant that produces altered elastase.

Pseudomonas aeruginosa PAO mutants defective in elastase were isolated by plate assays of nitrosoguanidine-mutagenized clones. A total of 75 elastase mutants were isolated from 43,000 mutagenized clones. One mutant (PAO-E64) was apparently identical to the parental strain except for its deficiency in elastase activity. This mutant produced an enzyme which was antigenically indistinguishable from parental elastase. Furthermore, equal levels of elastase antigen were produced by this mutant and its parental strain. The mutant elastase, however, had greatly reduced enzymatic activity. Mutant PAO-E64 is presumed to have a mutation in the structural gene for elastase. We have designated the genotype of the mutation in PAO-E64 as lasA1.     

Synthesis, processing, and transport of Pseudomonas aeruginosa elastase.

Three cell-associated elastase precursors with approximate molecular weights of 60,000 (P), 56,000 (Pro I), and 36,000 (Pro II) were identified in Pseudomonas aeruginosa cells by pulse-labeling with [35S]methionine and immunoprecipitation. In the absence of inhibitors, cells of a wild-type strain as well as those of the secretion-defective mutant PAKS 18 accumulated Pro II as the only elastase-related radioactive protein. EDTA but not EGTA [ethylene glycol-bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid] inhibited the formation of Pro II, and this inhibition was accompanied by the accumulation of Pro I. P accumulated in cells labeled in the presence of ethanol (with or without EDTA), dinitrophenol plus EDTA, or carbonyl cyanide m-chlorophenyl hydrazone plus EDTA. Pro I and Pro II were localized to the periplasm, and as evident from pulse-chase experiments, Pro I was converted to the mature extracellular enzyme with Pro II as an intermediate of the reaction. P was located to the membrane fraction. Pro I but not Pro II was immunoprecipitated by antibodies specific to a protein of about 20,000 molecular weight (P20), which, as we showed before (Kessler and Safrin, J. Bacteriol. 170:1215-1219, 1988), forms a complex with an inactive periplasmic elastase precursor of about 36,000 molecular weight. Our results suggest that the elastase is made by the cells as a preproenzyme (P), containing a signal sequence of about 4,000 molecular weight and a "pro" sequence of about 20,000 molecular weight. Processing and export of the preproenzyme involve the formation of two periplasmic proenzyme species: proelastase I (56 kilodaltons [kDa]) and proelastase II (36 kDa). The former is short-lived, whereas proelastase II accumulates temporarily in the periplasm, most likely as a complex with the 20-kDa propeptide released from proelastase I upon conversion to proelastase II. The final step in elastase secretion seems to required both the proteolytic removal of a small peptide from proelastase II and dissociation of the latter from P20.     

Partial purification and characterization of thiosulfate oxidase from Pseudomonas aeruginosa.

Soluble thiosulfate oxidase from Pseudomonas aeruginosa was purified 85-fold and coverted thiosulfate to tetrathionate by using either ferricyanide or cytochrome c as an electron acceptor.     

Production, purification, and characterization of a Mg2+-responsive porphobilinogen synthase from Pseudomonas aeruginosa.

During tetrapyrrole biosynthesis the metalloenzyme porphobilinogen synthase (PBGS) catalyzes the condensation of two molecules of 5-aminolevulinic acid to form the pyrrole porphobilinogen. Pseudomonas aeruginosa PBGS was synthesized in Escherichia coli, and the enzyme was purified as a fusion protein with glutathione S-transferase (GST). After removal of GST, a molecular mass of 280 000 +/- 10 000 with a Stokes radius of 57 A was determined for native PBGS, indicating a homooctameric structure of the enzyme. Mg2+ stabilized the oligomeric state but was not essential for octamer formation. Alteration of N-terminal amino acids changed the oligomeric state and reduced the activity of the enzyme, revealing the importance of this region for oligomerization and activity. EDTA treatment severely inhibited enzymatic activity which could be completely restored by the addition of Mg2+ or Mn2+. At concentrations in the micromolar range Co2+, Zn2+, and Ni2+ partially restored EDTA-inhibited enzymatic activity while higher concentrations of Zn2+ inhibited the enzyme. Pb2+, Cd2+, and Hg2+ did not restore activity. A stimulatory effect of monovalent ions was observed. A Km of 0.33 mM for ALA and a maximal specific activity of 60 micromol h-1 mg-1 at the pH optimum of 8.6 in the presence of Mg2+ and K+ were found. pH-dependent kinetic studies were combined with protein modifications to determine the structural basis of two observed pKa values of approximately 7.9 (pKa1) and 9.5 (pKa2). These are postulated respectively as ionization of an active site lysine residue and of free substrate during catalysis. Some PBGS inhibitors were characterized. Finally, we succeeded in obtaining well-ordered crystals of P. aeruginosa PBGS complexed with the substrate analogue levulinic acid.     

Physico-chemical and biological characteristics of Pseudomonas aeruginosa elastase

Elastase isolated from P. aeruginosa clinical strain hydrolyzes elastin, casein, hemoglobin, ovalbumin, gelatin, fibrin, collagen. The optimum pH ensuring the activity of the enzyme is 7.8-8.0. Elastase shows maximum stability at pH 6.6-9.0. Heating at 80 degrees C for 10 minutes results in its practically complete inactivation. Elastase is a highly radiosensitive enzyme. Chelating agents and zinc, cobalt, mercury ions suppress its activity. Sodium and ammonium chlorides selectively inhibit the elastolytic, but not proteolytic activity of the enzyme. Elastase shows pronounced dermonecrotic and keratolytic action.