Regulation of cell division in pea root tips after wounding: A possible role for ethylene

Summary Calcofluor White ST is a fluorescent brightener that has previously been shown to alter cellulose ribbon assembly in the bacteriumAcetobacter xylinum. In this report, we demonstrate that Calcofluor also disrupts cell wall assembly in the eukaryotic algaOocystis apiculata. When observed with polarization microscopy, walls altered by Calcofluor show reduced birefringence relative to controls. Electron microscopy has shown that these altered walls contain regions which consist primarily of amorphous material and which generally lack organized microfibrils. We propose that wall alteration occurs because Calcofluor binds with the glucan chains polymerized by the cellulose synthesizing enzymes as they are produced. As a consequence, the glucan chains are prevented from co-crystallizing to form microfibrils. Synthesis of normal walls resumes when Calcofluor is removed, which is consistent with our proposal that Calcofluor acts by direct physical interaction with newly synthesized wall components.Several types of fluorescent patterns at the cell wall/plasmalemma interface have also been observed following Calcofluor treatment. Fluorescent spots, striations; helical bands, and lens-shaped thickenings have been documented. Each of these patterns may be the result of the interaction of Calcofluor with cellulose at different spatial or temporal levels or from varying concentrations of the brightener itself. Helical bands and lens-shaped thickenings also have been examined with the electron microscope. Like other regions of wall alteration, they are found to contain primarily amorphous material. Finally, we note that cells with severely disrupted walls are unable to complete their normal life cycle.     

POM-POM2/cellulose synthase interacting1 is essential for the functional association of cellulose synthase and microtubules in Arabidopsis

In plants, regulation of cellulose synthesis is fundamental for morphogenesis and plant growth. Cellulose is synthesized at the plasma membrane, and the orientation of synthesis is guided by cortical microtubules; however, the guiding mechanism is currently unknown. We show that the conditional root elongation pom2 mutants are impaired in cell elongation, fertility, and microtubule-related functions. Map-based cloning of the POM-POM2 locus revealed that it is allelic to CELLULOSE SYNTHASE INTERACTING1 (CSI1). Fluorescently tagged POM2/CSI1s associated with both plasma membrane-located cellulose synthases (CESAs) and post-Golgi CESA-containing compartments. Interestingly, while CESA insertions coincided with cortical microtubules in the pom2/csi1 mutants, the microtubule-defined movement of the CESAs was significantly reduced in the mutant. We propose that POM2/CSI1 provides a scaffold between the CESAs and cortical microtubules that guide cellulose synthesis.     

Cellulose synthesis: a complex complex

Cellulose is the world's most abundant biopolymer and a key structural component of the plant cell wall. Cellulose is comprised of hydrogen-bonded beta-1,4-linked glucan chains that are synthesized at the plasma membrane by large cellulose synthase (CESA) complexes. Recent advances in visualization of fluorescently labelled complexes have facilitated exploration of regulatory modes of cellulose production. For example, several herbicides, such as isoxaben and 2,6-dichlorobenzonitrile that inhibit cellulose production appear to affect different aspects of synthesis. Dual-labelling of cytoskeletal components and CESAs has revealed dynamic feedback regulation between cellulose synthesis and microtubule orientation and organization. In addition, fluorescently tagged CESA2 subunits may substitute for another subunit, CESA6, which suggests both plasticity and specificity for one of the components of the CESA complex.     

Cellulose biosynthesis: current views and evolving concepts

* AIMS: To outline the current state of knowledge and discuss the evolution of various viewpoints put forth to explain the mechanism of cellulose biosynthesis. * SCOPE: Understanding the mechanism of cellulose biosynthesis is one of the major challenges in plant biology. The simplicity in the chemical structure of cellulose belies the complexities that are associated with the synthesis and assembly of this polysaccharide. Assembly of cellulose microfibrils in most organisms is visualized as a multi-step process involving a number of proteins with the key protein being the cellulose synthase catalytic sub-unit. Although genes encoding this protein have been identified in almost all cellulose synthesizing organisms, it has been a challenge in general, and more specifically in vascular plants, to demonstrate cellulose synthase activity in vitro. The assembly of glucan chains into cellulose microfibrils of specific dimensions, viewed as a spontaneous process, necessitates the assembly of synthesizing sites unique to most groups of organisms. The steps of polymerization (requiring the specific arrangement and activity of the cellulose synthase catalytic sub-units) and crystallization (directed self-assembly of glucan chains) are certainly interlinked in the formation of cellulose microfibrils. Mutants affected in cellulose biosynthesis have been identified in vascular plants. Studies on these mutants and herbicide-treated plants suggest an interesting link between the steps of polymerization and crystallization during cellulose biosynthesis. * CONCLUSIONS: With the identification of a large number of genes encoding cellulose synthases and cellulose synthase-like proteins in vascular plants and the supposed role of a number of other proteins in cellulose biosynthesis, a complete understanding of this process will necessitate a wider variety of research tools and approaches than was thought to be required a few years back.     

Brittle Culm1, a COBRA-Like Protein,Functions in Cellulose Assembly through Binding Cellulose Microfibrils

Cellulose represents the most abundant biopolymer in nature and has great economic importance. Cellulose chains pack laterally into crystalline forms, stacking into a complicated crystallographic structure. However, the mechanism of cellulose crystallization is poorly understood. Here, via functional characterization, we report that Brittle Culm1 (BC1), a COBRA-like protein in rice, modifies cellulose crystallinity. BC1 was demonstrated to be a glycosylphosphatidylinositol (GPI) anchored protein and can be released into cell walls by removal of the GPI anchor. BC1 possesses a carbohydrate-binding module (CBM) at its N-terminus. In vitro binding assays showed that this CBM interacts specifically with crystalline cellulose, and several aromatic residues in this domain are essential for binding. It was further demonstrated that cell wall-localized BC1 via the CBM and GPI anchor is one functional form of BC1. X-ray diffraction (XRD) assays revealed that mutations in BC1 and knockdown of BC1 expression decrease the crystallite width of cellulose; overexpression of BC1 and the CBM-mutated BC1s caused varied crystallinity with results that were consistent with the in vitro binding assay. Moreover, interaction between the CBM and cellulose microfibrils was largely repressed when the cell wall residues were pre-stained with two cellulose dyes. Treating wild-type and bc1 seedlings with the dyes resulted in insensitive root growth responses in bc1 plants. Combined with the evidence that BC1 and three secondary wall cellulose synthases (CESAs) function in different steps of cellulose production as revealed by genetic analysis, we conclude that BC1 modulates cellulose assembly by interacting with cellulose and affecting microfibril crystallinity.     

Molecular Modeling and Imaging of Initial Stages of Cellulose Fibril Assembly: Evidence for a Disordered Intermediate Stage

The remarkable mechanical strength of cellulose reflects the arrangement of multiple β-1,4-linked glucan chains in a para-crystalline fibril. During plant cellulose biosynthesis, a multimeric cellulose synthesis complex (CSC) moves within the plane of the plasma membrane as many glucan chains are synthesized from the same end and in close proximity. Many questions remain about the mechanism of cellulose fibril assembly, for example must multiple catalytic subunits within one CSC polymerize cellulose at the same rate? How does the cellulose fibril bend to align horizontally with the cell wall? Here we used mathematical modeling to investigate the interactions between glucan chains immediately after extrusion on the plasma membrane surface. Molecular dynamics simulations on groups of six glucans, each originating from a position approximating its extrusion site, revealed initial formation of an uncrystallized aggregate of chains from which a protofibril arose spontaneously through a ratchet mechanism involving hydrogen bonds and van der Waals interactions between glucose monomers. Consistent with the predictions from the model, freeze-fracture transmission electron microscopy using improved methods revealed a hemispherical accumulation of material at points of origination of apparent cellulose fibrils on the external surface of the plasma membrane where rosette-type CSCs were also observed. Together the data support the possibility that a zone of uncrystallized chains on the plasma membrane surface buffers the predicted variable rates of cellulose polymerization from multiple catalytic subunits within the CSC and acts as a flexible hinge allowing the horizontal alignment of the crystalline cellulose fibrils relative to the cell wall.     

How Does Hemicelluloses Removal Alter Plant Cell Wall Nanoscale Architecture and Correlate with Enzymatic Digestibility?

Thorough understanding of how hemicelluloses removal influences cell wall nanoscale architecture and cellulose digestion is of crucial importance for enabling low-cost industrial conversion of lignocellulosic biomass to renewable biofuels. In this work, delignified poplar cell walls, after various degrees of hemicelluloses removal, were characterized by Fourier transform infrared imaging spectroscopy and atomic force microscopy to evaluate enhancement in cell wall digestibility. There was a gradual decrease in hemicelluloses content with dilute alkali treatment, which resulted in alterations in the nanoscale architecture and crystallinity of cell walls. Removal of hemicelluloses did not disrupt the integrity of microfibrils but resulted in exposure of microfibrils and a decrease in the diameter of microfibrils. X-ray analysis indicated that the increase in crystallinity beyond natural variations in the crystallinity of cellulose was mainly attributable to removal of hemicelluloses. In conclusion, alterations in the architecture and crystallinity of cell walls facilitated enzymatic digestion of delignified poplar, enhancing cellulose conversion from 68.24 to 75.16 %.     

Development of cell wall appendages inAcanthosphaera zachariasi (Chlorococcales): Kinetics,site of cellulose synthesis and of microfibril assembly,and barb formation

Summary The investigation of the formation of cell wall appendages inAcanthosphaera by means of light and electron microscopy and by the use of dyes which interfere with microfibril assembly resulted in several observations which are helpful to an understanding of the formation of normal cell walls. The barbs are built up in the ER, pass through the Golgi apparatus, and are extruded exocytotically after cytokinesis, a remarkable example of the secretion of a structured product. Each cellulose microfibril in a spike develops in a distinct pit of the plasmalemma. The pits are aggregated in a pit field, generating one spike, and are closely adjacent to a basal vesicle which might have morphogenetic and/or regulatory functions. The pits are the site of cellulose synthesis; here the plasmalemma is conspicuously thickened. As shown directly and by the application of Calcofluor white and Congo red, the microfibrils assemble at a certain distance from the plasma membrane,i.e. cellulose synthesis and microfibril assembly are separated by a gap. It is discussed whether single glucan chains or small bundles of them are released from the plasmalemma. The elongation rate of the spikes indicates that about 1000 glycosidic linkages per glucan chain per minute are formed.     

The Stability of Cellulose: A Statistical Perspective from a Coarse-Grained Model of Hydrogen-Bond Networks

A critical roadblock to the production of biofuels from lignocellulosic biomass is the efficient degradation of crystalline microfibrils of cellulose to glucose. A microscopic understanding of how different physical conditions affect the overall stability of the crystalline structure of microfibrils could facilitate the design of more effective protocols for their degradation. One of the essential physical interactions that stabilizes microfibrils is a network of hydrogen (H) bonds: both intrachain H-bonds between neighboring monomers of a single cellulose polymer chain and interchain H-bonds between adjacent chains. We construct a statistical mechanical model of cellulose assembly at the resolution of explicit hydrogen-bond networks. Using the transfer matrix method, the partition function and the subsequent statistical properties are evaluated. With the help of this lattice-based model, we capture the plasticity of the H-bond network in cellulose due to frustration and redundancy in the placement of H-bonds. This plasticity is responsible for the stability of cellulose over a wide range of temperatures. Stable intrachain and interchain H-bonds are identified as a function of temperature that could possibly be manipulated toward rational destruction of crystalline cellulose.     

Organization of pectic arabinan and galactan side chains in association with cellulose microfibrils in primary cell walls and related models envisaged

The structure of arabinan and galactan domains in association with cellulose microfibrils was investigated using enzymatic and alkali degradation procedures. Sugar beet and potato cell wall residues (called 'natural' composites), rich in pectic neutral sugar side chains and cellulose, as well as 'artificial' composites, created by in vitro adsorption of arabinan and galactan side chains onto primary cell wall cellulose, were studied. These composites were sequentially treated with enzymes specific for pectic side chains and hot alkali. The degradation approach used showed that most of the arabinan and galactan side chains are in strong interaction with cellulose and are not hydrolysed by pectic side chain-degrading enzymes. It seems unlikely that isolated arabinan and galactan chains are able to tether adjacent microfibrils. However, cellulose microfibrils may be tethered by different pectic side chains belonging to the same pectic macromolecule.     

Functional analysis of complexes with mixed primary and secondary cellulose synthases

In higher plants, cellulose is synthesized by cellulose synthase complexes, which contain multiple isoforms of cellulose synthases (CESAs). Among the total 10 CESA genes in Arabidopsis, recessive mutations at three of them cause the collapse of mature xylem cells in inflorescence stems of Arabidopsis (irx1^cesa8, irx3^cesa7 and irx5^cesa4). These CESA genes are considered secondary cell wall CESAs. The others (the function CESA10 is still unknown) are thought to be specialized for cellulose synthesis in the primary cell wall. A split-ubiquitin membrane yeast two-hybrid system was used to assess interactions among four primary CESAs (CESA1, CESA2, CESA3, CESA6) and three secondary CESAs (CESA4, CESA7, CESA8). Our results showed that primary CESAs could physically interact with secondary CESAs in a limited fashion. Analysis of transgenic lines showed that CESA1 could partially rescue irx1^cesa8 null mutants, resulting in complementation of the plant growth defect, collapsed xylem and cellulose content deficiency. These results suggest that mixed primary and secondary CESA complexes are functional using experimental set-ups.     

Isolation and Characterization of Two Cellulose Morphology Mutants of Gluconacetobacter hansenii ATCC23769 Producing Cellulose with Lower Crystallinity

Gluconacetobacter hansenii, a Gram-negative bacterium, produces and secrets highly crystalline cellulose into growth medium, and has long been used as a model system for studying cellulose synthesis in higher plants. Cellulose synthesis involves the formation of β-1,4 glucan chains via the polymerization of glucose units by a multi-enzyme cellulose synthase complex (CSC). These glucan chains assemble into ordered structures including crystalline microfibrils. AcsA is the catalytic subunit of the cellulose synthase enzymes in the CSC, and AcsC is required for the secretion of cellulose. However, little is known about other proteins required for the assembly of crystalline cellulose. To address this question, we visually examined cellulose pellicles formed in growth media of 763 individual colonies of G. hansenii generated via Tn5 transposon insertion mutagenesis, and identified 85 that produced cellulose with altered morphologies. X-ray diffraction analysis of these 85 mutants identified two that produced cellulose with significantly lower crystallinity than wild type. The gene disrupted in one of these two mutants encoded a lysine decarboxylase and that in the other encoded an alanine racemase. Solid-state NMR analysis revealed that cellulose produced by these two mutants contained increased amounts of non-crystalline cellulose and monosaccharides associated with non-cellulosic polysaccharides as compared to the wild type. Monosaccharide analysis detected higher percentages of galactose and mannose in cellulose produced by both mutants. Field emission scanning electron microscopy showed that cellulose produced by the mutants was unevenly distributed, with some regions appearing to contain deposition of non-cellulosic polysaccharides; however, the width of the ribbon was comparable to that of normal cellulose. As both lysine decarboxylase and alanine racemase are required for the integrity of peptidoglycan, we propose a model for the role of peptidoglycan in the assembly of crystalline cellulose.     

HPRT and the Lesch—Nyhan syndrome

The view is presented that extracellular architecture in plant cell walls results from an interplay between molecular self-assembly and mechanical reorientation due to growth forces. A key initial self-assembly step may involve hemicelluloses. It is suggested that hemicelluloses may self-assemble into a helicoid via a cholesteric liquid crystalline phase; the detailed molecular structure of hemicelluloses (stiff backbone, bulky side chains, and the presence of asymmetric carbon atoms) is shown to be consistent with cholesteric requirements for such self-assembly. Since hemicelluloses are hydrogen-bonded to the periphery of cellulose microfibrils, the cellulose could then itself become helicoidally arranged. Such ‘universal plywood’ structure is found in the walls of a wide variety of plants, and in several types of cell (including wood). The permanent effects of growth stresses on patterns seen in sections of helicoids are displayed by computer graphics plots, and the expected changes in stiffness are calculated.     

Evidence for in vitro binding of pectin side chains to cellulose

Pectins of varying structures were tested for their ability to interact with cellulose in comparison to the well-known adsorption of xyloglucan. Our results reveal that sugar beet (Beta vulgaris) and potato (Solanum tuberosum) pectins, which are rich in neutral sugar side chains, can bind in vitro to cellulose. The extent of binding varies with respect to the nature and structure of the side chains. Additionally, branched arabinans (Br-Arabinans) or debranched arabinans (Deb-Arabinans; isolated from sugar beet) and galactans (isolated from potato) were shown bind to cellulose microfibrils. The adsorption of Br-Arabinan and galactan was lower than that of Deb-Arabinan. The maximum adsorption affinity of Deb-Arabinan to cellulose was comparable to that of xyloglucan. The study of sugar beet and potato alkali-treated cell walls supports the hypothesis of pectin-cellulose interaction. Natural composites enriched in arabinans or galactans and cellulose were recovered. The binding of pectins to cellulose microfibrils may be of considerable significance in the modeling of primary cell walls of plants as well as in the process of cell wall assembly.     

Plant cell wall characterization using scanning probe microscopy techniques

Lignocellulosic biomass is today considered a promising renewable resource for bioenergy production. A combined chemical and biological process is currently under consideration for the conversion of polysaccharides from plant cell wall materials, mainly cellulose and hemicelluloses, to simple sugars that can be fermented to biofuels. Native plant cellulose forms nanometer-scale microfibrils that are embedded in a polymeric network of hemicelluloses, pectins, and lignins; this explains, in part, the recalcitrance of biomass to deconstruction. The chemical and structural characteristics of these plant cell wall constituents remain largely unknown today. Scanning probe microscopy techniques, particularly atomic force microscopy and its application in characterizing plant cell wall structure, are reviewed here. We also further discuss future developments based on scanning probe microscopy techniques that combine linear and nonlinear optical techniques to characterize plant cell wall nanometer-scale structures, specifically apertureless near-field scanning optical microscopy and coherent anti-Stokes Raman scattering microscopy.     

Spatio‐temporal analysis of cellulose synthesis during cell plate formation in Arabidopsis

During cytokinesis a new crosswall is rapidly laid down. This process involves the formation at the cell equator of a tubulo‐vesicular membrane network (TVN). This TVN evolves into a tubular network (TN) and a planar fenestrated sheet, which extends at its periphery before fusing to the mother cell wall. The role of cell wall polymers in cell plate assembly is poorly understood. We used specific stains and GFP‐labelled cellulose synthases (CESAs) to show that cellulose, as well as three distinct CESAs, accumulated in the cell plate already at the TVN stage. This early presence suggests that cellulose is extruded into the tubular membrane structures of the TVN. Co‐localisation studies using GFP–CESAs suggest the delivery of cellulose synthase complexes (CSCs) to the cell plate via phragmoplast‐associated vesicles. In the more mature TN part of the cell plate, we observed delivery of GFP–CESA from doughnut‐shaped organelles, presumably Golgi bodies. During the conversion of the TN into a planar fenestrated sheet, the GFP–CESA density diminished, whereas GFP–CESA levels remained high in the TVN zone at the periphery of the expanding cell plate. We observed retrieval of GFP–CESA in clathrin‐containing structures from the central zone of the cell plate and from the plasma membrane of the mother cell, which may contribute to the recycling of CESAs to the peripheral growth zone of the cell plate. These observations, together with mutant phenotypes of cellulose‐deficient mutants and pharmacological experiments, suggest a key role for cellulose synthesis already at early stages of cell plate assembly.     

Secondary cell-wall assembly in flax phloem fibres: role of galactans

Non-lignified fibre cells (named gelatinous fibres) are present in tension wood and the stems of fibre crops (such as flax and hemp). These cells develop a very thick S2 layer within the secondary cell wall, which is characterised by (1) cellulose microfibrils largely parallel to the longitudinal axis of the cell, and (2) a high proportion of galactose-containing polymers among the non-cellulosic polysaccharides. In this review, we focus on the role of these polymers in the assembly of gelatinous fibres of flax. At the different stages of fibre development, we analyse in detail data based on sugar composition, linkages of pectic polymers, and immunolocalisation of the β-(1→4)-galactans. These data indicate that high molecular-mass gelatinous galactans accumulate in specialised Golgi-derived vesicles during fibre cell-wall thickening. They consist of RG-I-like polymers with side chains of β-(1→4)-linked galactose. Most of them are short, but there are also long chains containing up to 28 galactosyl residues. At fibre maturity, two types of cross-linked galactans are identified, a C–L structure that resembles the part of soluble galactan with long side chains and a C–S structure with short chains. Different possibilities for soluble galactan to give rise to C–L and C–S are analysed. In addition, we discuss the prospect for the soluble galactan in preventing the newly formed cellulose chains from completing immediate crystallisation. This leads to a hypothesis that firstly the secretion of soluble galactans plays a role in the axial orientation of cellulose microfibrils, and secondly the remodelling and cross-linking of pectic galactans are linked to the dehydration and the assembly of S2 layer.     

Expansin mode of action on cell walls. Analysis of wall hydrolysis, stress relaxation, and binding

The biochemical mechanisms underlying cell wall expansion in plants have long been a matter of conjecture. Previous work in our laboratory identified two proteins (named "expansins") that catalyze the acid-induced extension of isolated cucumber cell walls. Here we examine the mechanism of expansin action with three approaches. First, we report that expansins did not alter the molecular mass distribution or the viscosity of solutions of matrix polysaccharides. We conclude that expansins do not hydrolyze the major pectins or hemicelluloses of the cucumber wall. Second, we investigated the effects of expansins on stress relaxation of isolated walls. These studies show that expansins account for the pH-sensitive and heat-labile components of wall stress relaxation. In addition, these experiments show that expansins do not cause a progressive weakening of the walls, as might be expected from the action of a hydrolase. Third, we studied the binding of expansins to the cell wall and its components. The binding characteristics are consistent with this being the site of expansin action. We found that expansins bind weakly to crystalline cellulose but that this binding is greatly increased upon coating the cellulose with various hemicelluloses. Xyloglucan, either solubilized or as a coating on cellulose microfibrils, was not very effective as a binding substrate. Expansins were present in growing cell walls in low quantities (approximately 1 part in 5000 on a dry weight basis), suggesting that they function catalytically. We conclude that expansins bind at the interface between cellulose microfibrils and matrix polysaccharides in the wall and induce extension by reversibly disrupting noncovalent bonds within this polymeric network. Our results suggest that a minor structural component of the matrix, other than pectin and xyloglucan, plays an important role in expansin binding to the wall and, presumably, in expansin action.     

(1–3)-β-Glucan synthesis ofNeurospora crassa

(1–3)--d-Glucan synthase activity ofNeurospora crassa was localized to the plasma membrane by autoradiography of colloidal gold-labeled plasma membranes. The active site of glucan synthase for substrate hydrolysis was determined to be cytoplasmic facing. However, glucan synthase activity present in intact protoplasts was partially sensitive to Novozym 234 and to glutaraldehyde treatments, suggestive that enzyme activity is transmembrane. Enzyme activity also directed the formation of microfibrils in vitro. Taken together, these and previous results support the following scheme for glucan synthesis: 1. The sequential addition of glucose residues from UDP-glucose to glucan chains occurs on the cytoplasmically facing portion of glucan synthase. 2. As each glucan chain is synthesized, it is extruded to the extracytoplasmic side of the plasma membrane. 3. As each chain is extruded, it forms interchain hydrogen bonds with adjacent chains, resulting in glucan microfibril assembly.     

KORRIGAN1 Interacts Specifically with Integral Components of the Cellulose Synthase Machinery

Cellulose is synthesized by the so called rosette protein complex and the catalytic subunits of this complex are the cellulose synthases (CESAs). It is thought that the rosette complexes in the primary and secondary cell walls each contains at least three different non-redundant cellulose synthases. In addition to the CESA proteins, cellulose biosynthesis almost certainly requires the action of other proteins, although few have been identified and little is known about the biochemical role of those that have been identified. One of these proteins is KORRIGAN (KOR1). Mutant analysis of this protein in Arabidopsis thaliana showed altered cellulose content in both the primary and secondary cell wall. KOR1 is thought to be required for cellulose synthesis acting as a cellulase at the plasma membrane–cell wall interface. KOR1 has recently been shown to interact with the primary cellulose synthase rosette complex however direct interaction with that of the secondary cell wall has never been demonstrated. Using various methods, both in vitro and in planta, it was shown that KOR1 interacts specifically with only two of the secondary CESA proteins. The KOR1 protein domain(s) involved in the interaction with the CESA proteins were also identified by analyzing the interaction of truncated forms of KOR1 with CESA proteins. The KOR1 transmembrane domain has shown to be required for the interaction between KOR1 and the different CESAs, as well as for higher oligomer formation of KOR1.