Role of the N and C-terminal strands of beta 2-microglobulin in amyloid formation at neutral pH

Beta 2-microglobulin (beta(2)m) is known to form amyloid fibrils de novo in vitro under acidic conditions (below pH 4.8). Fibril formation at neutral pH, however, has only been observed by deletion of the N-terminal six residues; by the addition of pre-assembled seeds; or in the presence of Cu(2+). Based on these observations, and other structural data, models for fibril formation of beta(2)m have been proposed that involve the fraying of the N and C-terminal beta-strands and the consequent loss of edge strand protective features. Here, we examine the role of the N and C-terminal strands in the initiation of fibrillogenesis of beta(2)m by creating point mutations in strands A and G and comparing the properties of the resulting proteins with variants containing similar mutations elsewhere in the protein. We show that truncation of buried hydrophobic side-chains in strands A and G promotes rapid fibril formation at neutral pH, even in unseeded reactions, and increases the rate of fibril formation under acidic conditions. By contrast, similar mutations created in the remaining seven beta-strands of the native protein have little effect on the rate or pH dependence of fibril formation. The data are consistent with the view that perturbation of the N and C-terminal edge strands is an important feature in the generation of assembly-competent states of beta(2)m.     

A Simple Lattice Model That Captures Protein Folding,Aggregation and Amyloid Formation

The ability of many proteins to convert from their functional soluble state to amyloid fibrils can be attributed to inter-molecular beta strand formation. Such amyloid formation is associated with neurodegenerative disorders like Alzheimer''s and Parkinson''s. Molecular modelling can play a key role in providing insight into the factors that make proteins prone to fibril formation. However, fully atomistic models are computationally too expensive to capture the length and time scales associated with fibril formation. As the ability to form fibrils is the rule rather than the exception, much insight can be gained from the study of coarse-grained models that capture the key generic features associated with amyloid formation. Here we present a simple lattice model that can capture both protein folding and beta strand formation. Unlike standard lattice models, this model explicitly incorporates the formation of hydrogen bonds and the directionality of side chains. The simplicity of our model makes it computationally feasible to investigate the interplay between folding, amorphous aggregation and fibril formation, and maintains the capability of classic lattice models to simulate protein folding with high specificity. In our model, the folded proteins contain structures that resemble naturally occurring beta-sheets, with alternating polar and hydrophobic amino acids. Moreover, fibrils with intermolecular cross-beta strand conformations can be formed spontaneously out of multiple short hydrophobic peptide sequences. Both the formation of hydrogen bonds in folded structures and in fibrils is strongly dependent on the amino acid sequence, indicating that hydrogen-bonding interactions alone are not strong enough to initiate the formation of beta sheets. This result agrees with experimental observations that beta sheet and amyloid formation is strongly sequence dependent, with hydrophobic sequences being more prone to form such structures. Our model should open the way to a systematic study of the interplay between the factors that lead to amyloid formation.     

Does the location of a mutation determine the ability to form amyloid fibrils?

We have previously reported studies of fibril formation by a set of protein G B1 domain (beta1) variants, with mutations located around the central parallel beta-strands. In this study, we designed multiple mutations in the edge strands of beta1 to create proteins with a stability range comparable to that of the set of central mutants. All the edge variants are able to form amyloid fibrils when they are incubated at their melting temperatures. This result suggests that overall protein stability is the key determinant for amyloid formation and not the specific location of destabilizing mutations. The edge strand and variants cross-seed with each other and with members of the central variant family. Interesting fibrillar morphology was observed in some cross-seeding cases and its implications for a better understanding of nucleation and elongation events are discussed.     

Detecting the inter-peptide arrangement and maturation process of transthyretin (105-115) amyloid fibril using a FRET pair with short Förster distance

Transthyretin (TTR) is an amyloidogenic protein involved in many mental diseases. The peptide derived from TTR (105-115) has been widely studied as a model peptide for understanding the mechanism of amyloid fibril formation. However, the detailed arrangement of this peptide in amyloid fibril is still unclear. We have studied the amyloid fibril formation process of TTR (105-115) by introducing a pair of FRET probes into the peptide with a dansyl group at the N-terminal and a tryptophan residue at the C-terminal. Our experiment demonstrated that the strands of TTR (105-115) in the same beta-sheet may be parallel and the mating sheets may be anti-parallel to each other in the amyloid fibril. The kinetics followed by FRET and EM indicated for a possible intermediate state and the distance between sheets became shorter when the intermediate amyloid fibril turns into a more matured form.     

Initial conformational changes of human transthyretin under partially denaturing conditions

Human transthyretin (TTR) is an amyloidogenic protein. The pathway of TTR amyloid formation has been proposed based on lines of evidence: TTR tetramer first dissociates into native monomers, which is shown to be a rate-limiting step in the formation of fibrils. Subsequently, the monomeric species partially unfold to form the aggregation intermediates. Once such intermediates are formed, the following self-assembly process is a downhill polymerization. Hence, tertiary structural changes within the monomers after the dissociation are essential for the amyloid formation. These tertiary structural changes can be facilitated by partial denaturation. To probe the conformational changes under the partially denaturing conditions, five independent trajectories were collected for the wild-type (WT) and its pathogenic variants at 300 and 350 K, resulting in simulations that totaled 59 ns. Under these conditions, L55P variant is more labile than the wild-type and V30M variant. We have observed that the D strand of WT-TTR is trapped in two local minima: the native conformation and the amyloidogenic fold that resembles the surface loop of residues 54-55 of L55P variant. In the tetrameric state, the F strand is bent with large separations at the F-F' interface. This strand becomes flatter in the monomeric state, which may facilitate the formation of new F-F' interface with possible prolonged hydrogen bonds and/or shift in beta-strand register in the fibril state. During the unfolding process, the anticorrelated motion between the strands H and G as well as the strands H and A pulls the H strand out of the inner sheet plane, leading to a more twisted inner sheet. Our simulation has provided important detailed structural information about the partially unfolded state of TTR that may be related to the amyloidogenic intermediates.     

Side chain interactions determine the amyloid organization: a single layer beta-sheet molecular structure of the calcitonin peptide segment 15-19

In this paper we present a detailed atomic model for a protofilament, the most basic organization level, of the amyloid fibre formed by the peptide DFNKF. This pentapeptide is a segment derived from the human calcitonin, a natural amyloidogenic protein. Our model, which represents the outcome of extensive explicit solvent molecular dynamics (MD) simulations of different strand/sheet organizations, is a single beta-sheet filament largely without a hydrophobic core. Nevertheless, this structure is capable of reproducing the main features of the characteristic amyloid fibril organization and provides clues to the molecular basis of its experimental aggregation behaviour. Our results show that the side chains' chemical diversity induces the formation of a complex network of interactions that finally determine the microscopic arrangement of the strands at the protofilament level. This network of interactions, consisting of both side chain-side chain and backbone-side chain interactions, confers on the final single beta-sheet arrangement an unexpected stability, both by enhancing the association of related chemical groups and, at the same time, by shielding the hydrophobic segments from the polar solvent. The chemical physical characterization of this protofilament provides hints to the possible thermodynamical basis of the supra molecular organization that allows the formation of the filaments by lateral association of the preformed protofibrils. Its regular, highly polarized structure shows how other protofilaments can assemble. In terms of structural biology, our results clearly indicate that an amyloid organization implies a degree of complexity far beyond a simple nonspecific association of peptide strands via amide hydrogen bonds.     

Fibril modelling by sequence and structure conservation analysis combined with protein docking techniques: beta(2)-microglobulin amyloidosis

Obtaining atomic resolution structural models of amyloid fibrils is currently impossible, yet crucial for our understanding of the amyloid mechanism. Different pathways in the transformation of a native globular domain to an amyloid fibril invariably involve domain destabilization. Hence, locating the unstable segments of a domain is important for understanding its amyloidogenic transformation and possibly control it. Since relative conservation is suggested to relate to local stability, we performed an extensive, sequence and structure conservation analysis of the beta(2)-microglobulin (beta(2)-m) domain. Our dataset include 51 high resolution structures belonging to the "C1 set domain" family and 132 clustered PSI-BLAST search results. Segments of the beta(2)-m domain corresponding to strands A (residues 12-18), D (45-55) and G (91-95) were found to be less conserved and stable, while the central strands B (residues 22-28), C (36-41), E (62-70) and F (78-83) were found conserved and stable. Our findings are supported by accumulating observations from various experimental methods, including urea denaturation, limited proteolysis, H/D exchange and structure determination by both NMR and X-ray crystallography. We used our conservation findings together with experimental literature information to suggest a structural model for the polymerized unit of beta(2)-m. Pairwise protein docking and subsequent monomer stacking in the same manner suggest a fibril model consistent with the cross-beta structure.     

Mutational analysis of designed peptides that undergo structural transition from alpha helix to beta sheet and amyloid fibril formation

BACKGROUND: Conformational alteration and fibril formation of proteins have a key role in a variety of amyloid diseases. A simplified model peptide would lead to a better understanding of underlying mechanisms whereby protein misfolding and aggregation occur. Recently, we reported the design of peptides that undergo a self-initiated structural transition from an alpha helix to a beta sheet and form amyloid fibrils. In this study, we focus on two glutamine residues in the peptide, and report a mutational analysis of these residues. RESULTS: A coiled-coil alpha-helix structure bearing a hydrophobic adamantanecarbonyl (Ad) group at the N terminus was designed (parent peptide Ad-QQ). In neutral aqueous solution, the double Gln-->Ala mutant (Ad-AA) underwent the alpha-->beta structural transition within four hours, which was similar to the case of Ad-QQ. In contrast, two kinds of single Gln-->Ala mutant (Ad-QA and Ad-AQ) required three days for the transition. Furthermore, Ad-QQ and Ad-AA formed amyloid fibrils, whereas Ad-QA and Ad-AQ did not. Interestingly, however, Ad-QA and Ad-AQ complementarily assembled into the fibrils when they were mixed. CONCLUSIONS: The Gln-->Ala substitution in the peptide significantly alters the alpha-->beta transitional properties and the ability to form amyloid fibrils. A heterogeneous assembly of two peptide species into the fibrils is also presented. These results suggest that the secondary structural transition and self-assembly into the well-organized fibril may depend strictly on the primary structure, which determines the beta-sheet packing. The results might provide insights into misfolding and fibril formation of disease-associated mutant proteins.     

Identification of the region responsible for fibril formation in the CAD domain of caspase-activated DNase

Caspase-activated DNase (CAD) has a compact domain at its N-terminus (CAD domain, 87 amino acid residues), which comprises one alpha-helix and five beta-strands forming a single sheet. The CAD domain of CAD (CAD-CD) forms amyloid fibrils containing alpha-helix at low pH in the presence of salt. To obtain insights into the mechanism of amyloid fibril formation, we identified the peptide region essential for fibril formation of CAD-CD and the region responsible for the salt requirement. We searched for these regions by constructing a series of deletion and point mutants of CAD-CD. Fibril formation by these CAD-CD mutants was examined by fluorescence analysis of thioflavin T and transmission electron microscopy. C-Terminal deletion and point mutation studies revealed that an aromatic residue near the C-terminus (Trp81) is critical for fibril formation. In addition, the main chain conformation of the beta5 strand, which forms a hydrophobic core with Trp81, was found to be important for the fibril formation by CAD-CD. The N-terminal 30 amino acid region containing two beta-strands was not essential for fibril formation. Rather, the N-terminal region was found to be responsible for the requirement of salt for fibril formation.     

Differential effects of serine side chain interactions in amyloid formation by islet amyloid polypeptide

Islet amyloid polypeptide (IAPP), a 37 residue polypeptide, is the main protein component of islet amyloid deposits produced in the pancreas in Type 2 diabetes. Human IAPP contains five serine residues at positions 19, 20, 28, 29, and 34. Models of the IAPP amyloid fibril indicate a structure composed of two closely aligned columns of IAPP monomers with each monomer contributing to two intermolecular β‐strands. Ser 19 and Ser 20 are in the partially ordered β‐turn region, which links the two strands, whereas Ser 28, Ser 29, and Ser 34 are in the core region of the amyloid fibril. Ser 29 is involved in contacts between the two columns of monomers and is the part of the steric zipper interface. We undertook a study of individual serine substitutions with the hydrophobic isostere 2‐aminobutyric acid (2‐Abu) to examine the site‐specific role of serine side chains in IAPP amyloid formation. All five variants formed amyloid. The Ser 19 to 2‐Abu mutant accelerates amyloid formation by a factor of 3 to 4, while the Ser 29 to 2‐Abu mutation modestly slows the rate of amyloid formation. 2‐Abu replacements at the other sites had even smaller effects. The data demonstrate that the cross‐column interactions made by residue 29 are not essential for amyloid formation and also show that cross‐strand networks of hydrogen‐bonded Ser side chains, so called Ser‐ladders, are not required for IAPP amyloid formation. The effect of the Ser 19 to 2‐Abu mutant suggests that residues in this region are important for amyloid formation by IAPP.     

Direct visualisation of the beta-sheet structure of synthetic Alzheimer's amyloid

Amyloid fibrils are a major pathological feature of Alzheimer's disease as well as other amyloidoses including the prion diseases. They are an unusual phenomenon, being made up of different, normally soluble proteins which undergo a profound conformational change and assemble to form very stable, insoluble fibrils which accumulate in the extracellular spaces. In Alzheimer's disease the amyloid fibrils are composed of the A beta protein. Knowledge of the structure of amyloid is essential for understanding the abnormal assembly and deposition of these fibrils and could lead to the rational design of therapeutic agents for their prevention or disaggregation. Here we reveal the core structure of an Alzheimer's amyloid fibril by direct visualisation using cryo-electron microscopy. Synthetic amyloid fibrils composed of A beta residues 11 to 25 and 1 to 42 were examined. The A beta (11-25) fibrils are clearly composed of beta-sheet structure that is observable as striations across the fibres. The beta-strands run perpendicular to the fibre axis and the projections show that the fibres are composed of beta-sheets with the strands in direct register. This observation has implications not only for the further understanding of amyloid, but also for the development of cryo-electron microscopy for direct visualisation of secondary structure.     

Review: history of the amyloid fibril

Rudolph Virchow, in 1854, introduced and popularized the term amyloid to denote a macroscopic tissue abnormality that exhibited a positive iodine staining reaction. Subsequent light microscopic studies with polarizing optics demonstrated the inherent birefringence of amyloid deposits, a property that increased intensely after staining with Congo red dye. In 1959, electron microscopic examination of ultrathin sections of amyloidotic tissues revealed the presence of fibrils, indeterminate in length and, invariably, 80 to 100 A in width. Using the criteria of Congophilia and fibrillar morphology, 20 or more biochemically distinct forms of amyloid have been identified throughout the animal kingdom; each is specifically associated with a unique clinical syndrome. Fibrils, also 80 to 100 A in width, have been isolated from tissue homogenates using differential sedimentation or solubility. X-ray diffraction analysis revealed the fibrils to be ordered in the beta pleated sheet conformation, with the direction of the polypeptide backbone perpendicular to the fibril axis (cross beta structure). Because of the similar dimensions and tinctorial properties of the fibrils extracted from amyloid-laden tissues and amyloid fibrils in tissue sections, they have been assumed to be identical. However, the spatial relationship of proteoglycans and amyloid P component (AP), common to all forms of amyloid, to the putative protein only fibrils in tissues, has been unclear. Recently, it has been suggested that, in situ, amyloid fibrils are composed of proteoglycans and AP as well as amyloid proteins and thus resemble connective tissue microfibrils. Chemical and physical definition of the fibrils in tissues will be needed to relate the in vitro properties of amyloid protein fibrils to the pathogenesis of amyloid fibril formation in vivo.     

Peptides homologous to the amyloid protein of Alzheimer's disease containing a glutamine for glutamic acid substitution have accelerated amyloid fibril formation.

beta-Amyloid (A beta) deposition in fibril form is the central event in a number of diseases, including Alzheimer's disease (AD) and hereditary cerebral hemorrhage with amyloidosis - Dutch type (HCHWA-D). A beta is produced by degradation of a larger amyloid precursor protein (APP). Recently a mutation in the APP gene has been found in HCHWA-D causing a glutamine for glutamic acid substitution at residue 22 of A beta. The influence of this mutation on fibrillogenesis is not known, although it is clear that affected patients have accelerated cerebrovascular amyloid deposition, with disease symptoms early in life. We report the in vitro demonstration of accelerated fibril formation in a 28 residue synthetic peptide homologous to the Dutch variant A beta. Furthermore, in eight residue peptides homologous to A beta the presence of the mutation is necessary for fibril formation. These findings provide a mechanism for accelerated amyloid formation in the Dutch variant of APP.     

The mechanism of fibril formation of a non-inhibitory serpin ovalbumin revealed by the identification of amyloidogenic core regions

Ovalbumin (OVA), a non-inhibitory member of the serpin superfamily, forms fibrillar aggregates upon heat-induced denaturation. Recent studies suggested that OVA fibrils are generated by a mechanism similar to that of amyloid fibril formation, which is distinct from polymerization mechanisms proposed for other serpins. In this study, we provide new insights into the mechanism of OVA fibril formation through identification of amyloidogenic core regions using synthetic peptide fragments, site-directed mutagenesis, and limited proteolysis. OVA possesses a single disulfide bond between Cys(73) and Cys(120) in the N-terminal helical region of the protein. Heat treatment of disulfide-reduced OVA resulted in the formation of long straight fibrils that are distinct from the semiflexible fibrils formed from OVA with an intact disulfide. Computer predictions suggest that helix B (hB) of the N-terminal region, strand 3A, and strands 4-5B are highly β-aggregation-prone regions. These predictions were confirmed by the fact that synthetic peptides corresponding to these regions formed amyloid fibrils. Site-directed mutagenesis of OVA indicated that V41A substitution in hB interfered with the formation of fibrils. Co-incubation of a soluble peptide fragment of hB with the disulfide-intact full-length OVA consistently promoted formation of long straight fibrils. In addition, the N-terminal helical region of the heat-induced fibril of OVA was protected from limited proteolysis. These results indicate that the heat-induced fibril formation of OVA occurs by a mechanism involving transformation of the N-terminal helical region of the protein to β-strands, thereby forming sequential intermolecular linkages.     

Standard conformations of beta-arches in beta-solenoid proteins

Strand-turn-strand motifs found in beta-helical (more generally, beta-solenoid) proteins differ fundamentally from those found in globular proteins. The latter are primarily beta-hairpins in which the two strands form an antiparallel beta-sheet. In the former, the two strands are relatively rotated by approximately 90 degrees around the strand axes so that they interact via the side-chains, not via the polypeptide backbones. We call the latter structures, beta-arches, and their turns, beta-arcs. In beta-solenoid proteins, beta-arches stack in-register to form beta-arcades in which parallel beta-sheets are assembled from corresponding strands in successive layers. The number of beta-solenoids whose three-dimensional structures have been determined is now large enough to support a detailed analysis and classification of beta-arc conformations. Here, we present a systematic account of beta-arcs distinguished by the number of residues, their conformations, and their propensity to stack into arcades with other like or unlike arches. The trends to emerge from this analysis have implications for sequence-based detection and structural prediction of other beta-solenoid proteins as well as for identification of amyloidogenic sequences and elucidation of amyloid fibril structures.     

Recurrent alpha beta loop structures in TIM barrel motifs show a distinct pattern of conserved structural features.

A systematic survey of seven parallel alpha/beta barrel protein domains, based on exhaustive structural comparisons, reveals that a sizable proportion of the alpha beta loops in these proteins--20 out of a total of 49--belong to either one of two loop types previously described by Thornton and co-workers. Six loops are of the alpha beta 1 type, with one residue between the alpha-helix and beta-strand, and 13 are of the alpha beta 3 type, with three residues between the helix and the strand. Protein fragments embedding the identified loops, and termed alpha beta connections since they contain parts of the flanking helix and strand, have been analyzed in detail revealing that each type of connection has a distinct set of conserved structural features. The orientation of the beta-strand relative to the helix and loop portions is different owing to a very localized difference in backbone conformation. In alpha beta 1 connections, the chain enters the beta-strand via a residue adopting an extended conformation, while in alpha beta 3 it does so via a residue in a near alpha-helical conformation. Other conserved structural features include distinct patterns of side chain orientation relative to the beta-sheet surface and of main chain H-bonds in the loop and the beta-strand moieties. Significant differences also occur in packing interactions of conserved hydrophobic residues situated in the last turn of the helix. Yet the alpha-helix surface of both types of connections adopts similar orientations relative to the barrel sheet surface. Our results suggest furthermore that conserved hydrophobic residues along the sequence of the connections, may be correlated more with specific patterns of interactions made with neighboring helices and sheet strands than with helix/strand packing within the connection itself. A number of intriguing observations are also made on the distribution of the identified alpha beta 1 and alpha beta 3 loops within the alpha/beta-barrel motifs. They often occur adjacent to each other; alpha beta 3 loops invariably involve even numbered beta-strands, while alpha beta 1 loops involve preferentially odd beta-strands; all the analyzed proteins contain at least one alpha beta 3 loop in the first half of the eightfold alpha/beta barrel. Possible origins of all these observations, and their relevance to the stability and folding of parallel alpha/beta barrel motifs are discussed.     

Kinetically controlled thermal response of beta2-microglobulin amyloid fibrils

Calorimetric measurements were carried out using a differential scanning calorimeter in the temperature range from 10 to 120 degrees C for characterizing the thermal response of beta2-microglobulin amyloid fibrils. The thermograms of amyloid fibril solution showed a remarkably large decrease in heat capacity that was essentially released upon the thermal unfolding of the fibrils, in which the magnitude of negative heat capacity change was not explicable in terms of the current accessible surface area model of protein structural thermodynamics. The heat capacity-temperature curve of amyloid fibrils prior to the fibril unfolding exhibited an unusual dependence on the fibril concentration and the heating rate. Particularly, the heat needed to induce the thermal response was found to be linearly dependent on the heating rate, indicating that its thermal response is under a kinetic control and precluding the interpretation in terms of equilibrium thermodynamics. Furthermore, amyloid fibrils of amyloid beta peptides also exhibited a heating rate-dependent exothermic process before the fibril unfolding, indicating that the kinetically controlled thermal response may be a common phenomenon to amyloid fibrils. We suggest that the heating rate-dependent negative change in heat capacity is coupled to the association of amyloid fibrils with characteristic hydration pattern.     

Influence of temperature on formation of perfect tau fragment fibrils using PRIME20/DMD simulations

We investigate the fibrillization process for amyloid tau fragment peptides (VQIVYK) by applying the discontinuous molecular dynamics method to a system of 48 VQIVYK peptides modeled using a new protein model/force field, PRIME20. The aim of the article is to ascertain which factors are most important in determining whether or not a peptide system forms perfect coherent fibrillar structures. Two different directional criteria are used to determine when a hydrogen bond occurs: the original H‐bond constraints and a parallel preference H‐bond constraint that imparts a slight bias towards the formation of parallel versus antiparallel strands in a β‐sheet. Under the original H‐bond constraints, the resulting fibrillar structures contain a mixture of parallel and antiparallel pairs of strands within each β‐sheet over the whole fibrillization temperature range. Under the parallel preference H‐bond constraints, the β‐sheets within the fibrillar structures are more likely to be parallel and indeed become perfectly parallel, consistent with X‐ray crystallography, at a high temperature slightly below the fibrillization temperature. The high temperature environment encourages the formation of perfect fibril structures by providing enough time and space for peptides to rearrange during the aggregation process. There are two different kinetic mechanisms, template assembly with monomer addition at high temperature and merging/rearrangement without monomer addition at low temperature, which lead to significant differences in the final fibrillar structure. This suggests that the diverse fibril morphologies generally observed in vitro depend more on environmental conditions than has heretofore been appreciated.     

Optimum amyloid fibril formation of a peptide fragment suggests the amyloidogenic preference of beta2-microglobulin under physiological conditions

Beta(2)-microglobulin (beta(2)m) is a major component of amyloid fibrils deposited in patients with dialysis-related amyloidosis. Although full-length beta(2)m readily forms amyloid fibrils in vitro by seed-dependent extension with a maximum at pH 2.5, fibril formation under physiological conditions as detected in patients has been difficult to reproduce. A 22-residue K3 peptide of beta(2)m, Ser(20)-Lys(41), obtained by digestion with Acromobacter protease I, forms amyloid fibrils without seeding. To obtain further insight into the mechanism of fibril formation, we studied the pH dependence of fibril formation of the K3 peptide and its morphology using a ThT fluorescence assay and electron microscopy, respectively. K3 peptide formed amyloid fibrils over a wide range of pH values with an optimum around pH 7 and contrasted with the pH profile of the seed-dependent extension reaction of full-length beta(2)m. This suggests that once the rigid native-fold of beta(2)m is unfolded and additional factors triggering the nucleation process are provided, full-length beta(2)m discloses an intrinsic potential to form amyloid fibrils at neutral pH. The fibril formation was strongly promoted by dimerization of K3 through Cys(25). The morphology of the fibrils varied depending on the fibril formation conditions and the presence or absence of a disulfide bond. Various fibrils had the potential to seed fibril formation of full-length beta(2)m accompanied with a characteristic lag phase, suggesting that the internal structures are similar.