Adaptation of the Yeast URA3 Selection System to Gram-Negative Bacteria and Generation of a ΔbetCDE Pseudomonas putida Strain

A general procedure for efficient generation of gene knockouts in gram-negative bacteria by the adaptation of the Saccharomyces cerevisiae URA3 selection system is described. A Pseudomonas putida strain lacking the URA3 homolog pyrF (encoding orotidine-5′-phosphate decarboxylase) was constructed, allowing the use of a plasmid-borne copy of the gene as the target of selection. The delivery vector pTEC contains the pyrF gene and promoter, a conditional origin of replication (oriR6K), an origin of transfer (mobRK2), and an antibiotic selection marker flanked by multiple sites for cloning appropriate DNA segments. The versatility of pyrF as a selection system, allowing both positive and negative selection of the marker, and the robustness of the selection, where pyrF is associated with uracil prototrophy and fluoroorotic acid sensitivity, make this setup a powerful tool for efficient homologous gene replacement in gram-negative bacteria. The system has been instrumental for complete deletion of the P. putida choline-O-sulfate utilization operon betCDE, a mutant which could not be produced by any of the other genetic strategies available.     

Transformation system for an asporogenous methylotrophic yeast, Candida boidinii: cloning of the orotidine-5''-phosphate decarboxylase gene (URA3), isolation of uracil auxotrophic mutants, and use of the mutants for integrative transformation.

An integrative transformation system was established for an asporogenous methylotrophic yeast, Candida boidinii. This system uses a uracil auxotrophic mutant of C. boidinii as the host strain in combination with its URA3 gene as the selectable marker. First, the C. boidinii URA3 gene coding for orotidine-5'-phosphate decarboxylase (ODCase) was cloned by using complementation of the pyrF mutation of Escherichia coli. Next, the host ODCase-negative mutant strains (ura3 strains) were isolated by mutagenesis and selection for 5-fluro-orotic acid (5-FOA) resistance. Five ura3 host strains that exhibited both a low reversion rate and good methylotrophic growth were obtained. All of these strains could be transformed to Ura+ phenotype with a C. boidinii URA3-harboring plasmid linearized within the Candida DNA. The transformants had a stable Ura+ phenotype after nonselective growth for 10 generations. These results and extensive Southern analysis indicated that the linearized plasmid was integrated into the host chromosomal DNA by homologous recombination at the URA3 locus in C. boidinii.     

Recovery of YAC-end sequences through complementation of an Escherichia coli pyrF mutation.

We have developed a genetic means to recover sequences from YAC-ends near the yeast selectable marker URA3. This strategy is based on the ability of URA3 to complement mutations in pyrF, an Escherichia coli gene required for pyrimidine biosynthesis. We have developed an E.coli strain with a non-reverting allele of pyrF that is also suitable for cloning (recA-, hsdR-). We demonstrate the utility of this complementation strategy to obtain right-end clones from three YACs containing Arabidopsis thaliana DNA.     

Isolation of uracil auxotrophs of the fungus Acremonium cellulolyticus and the development of a transformation system with the pyrF gene

Acremonium cellulolyticus CF-2612 is a cellulase hyper-producing mutant that originated from A. cellulolyticus Y-94. In this study, we isolated a uracil auxotroph (strain CFP3) derived from CF-2612, and cloned a wild-type pyrF gene encoding orotate phosphoribosyl transferase (OPRTase) from Y-94. OPRTase activity was not detected in strain CFP3, which had one nucleotide substitution in its pyrF gene. The wild-type pyrF gene restored the defective growth of CFP3 on uracil-free medium, and PCR and Southern analyses revealed that wild-type pyrF was integrated into the genome. These results indicate that our transformation system for A. cellulolyticus with the pyrFgene as a selection marker was successful.     

Improved and versatile transformation system allowing multiple genetic manipulations of the hyperthermophilic archaeon Thermococcus kodakaraensis

We have recently developed a gene disruption system for the hyperthermophilic archaeon Thermococcus kodakaraensis by utilizing a pyrF-deficient mutant, KU25, as a host strain and the pyrF gene as a selectable marker. To achieve multiple genetic manipulations for more advanced functional analyses of genes in vivo, it is necessary to establish multiple host-marker systems or to develop a system in which repeated utilization of one marker gene is possible. In this study, we first constructed a new host strain, KU216 (DeltapyrF), by specific and almost complete deletion of endogenous pyrF through homologous recombination. In this refined host, there is no need to consider unknown mutations caused by random mutagenesis, and unlike in the previous host, KU25, there is little, if any, possibility that unintended recombination between the marker gene and the chromosomal allele occurs. Furthermore, a new host-marker combination of a trpE deletant, KW128 (DeltapyrF DeltatrpE::pyrF), and the trpE gene was developed. This system made it possible to isolate transformants through a more simple selection procedure as well as to deduce the transformation efficiency, overcoming practical disadvantages of the first system. The effects of the transformation conditions were also investigated using this system. Finally, we have also established a system in which repeated utilization of the counterselectable pyrF marker is possible through its excision by pop-out recombination. Both endogenous and exogenous sequences could be applied as tandem repeats flanking the marker pyrF for pop-out recombination. A double deletion mutant, KUW1 (DeltapyrF DeltatrpE), constructed with the pop-out strategy, was demonstrated to be a useful host for the dual markers pyrF and trpE. Likewise, a triple deletion mutant, KUWH1 (DeltapyrF DeltatrpE DeltahisD), could also be constructed. The transformation systems developed here now provide the means for extensive genetic studies in this hyperthermophilic archaeon.     

Conversion of pBR322-based plasmids into broad-host-range vectors by using the Tn3 transposition mechanism.

We constructed a series of transposon vectors which allow efficient in vitro gene manipulation and subsequent introduction of cloned DNA into a variety of gram-negative bacteria. Transfer of the cloned fragment from these multicopy plasmids into self-transmissible broad-host-range vectors is achieved in vivo, using the Tn3 transposition mechanism. Transposition into a variety of broad-host-range plasmids proceeds efficiently, and the resulting recombinant plasmids can be readily transferred and maintained in a variety of gram-negative bacteria. The utility of the transposable vectors was demonstrated by the introduction and expression of the lacIPOZY sequences of Escherichia coli into Pseudomonas putida strains, allowing them to utilize lactose as a sole source of carbon and energy.     

利用可重复使用的URA3标记基因建立热带假丝酵母基因敲除系统

热带假丝酵母(Candida tropicalis)在发酵工业中具有重要的应用潜力,但二倍体遗传结构和较低的遗传转化效率限制了其代谢工程育种技术的应用。建立可靠的遗传转化技术并高效的删除目的基因是代谢工程改造热带假丝酵母的重要前提。文章以C. tropicalis ATCC 20336为出发菌株,通过化学诱变筛选获得了尿嘧啶缺陷型突变株C. tropicalis XZX(ura3/ura3)。以丙酮酸脱羧酶(Pyruvate decarboxylase,PDC)基因作为靶基因构建了两端包含同源臂并在选择性标记C. tropicalis URA3(Orotidine-5′-phosphate decarboxylase,乳清酸核苷-5-磷酸脱羧酶)基因两侧同向插入源于沙门氏菌(Salmonella typhimurium)的hisG序列的基因敲除盒PDC1-hisG-URA3-hisG- PDC1(PHUHP),并转化宿主菌株C. tropicalis XZX,筛选获得PHUHP片段正确整合到染色体的PDC基因位点的转化子XZX02。在此基础上,将转化子XZX02涂布于5-FOA(5-氟乳清酸)选择培养基上,筛选得到URA3基因从PHUHP片段中丢失的营养缺陷型菌株XZX03。进一步构建了第2个PDC等位基因的删除表达盒PDCm- URA3-PDCm,并转化C. tropicalis XZX03菌株,获得转化子C. tropicalis XZX04。经PCR和DNA测序确认转化子C. tropicalis XZX04细胞染色体上的两个PDC等位基因被成功敲除。文章建立了一种营养缺陷型标记可重复使用的热带假丝酵母遗传转化技术,利用该技术成功敲除了细胞的PDC基因,为进一步利用代谢工程改造热带假丝酵母奠定了基础。     

Gene replacement and expression of foreign DNA in mycobacteria.

A system that permits molecular genetic manipulation of mycobacteria was developed on the basis of the yeast paradigm of gene replacement by homologous recombination. A shuttle vector that can replicate autonomously at a high copy number in Escherichia coli but must integrate into homologous DNA for survival in Mycobacterium smegmatis was constructed. The vector contains a ColE1 origin of replication, antibiotic resistance markers for ampicillin and kanamycin, a nutritional marker (pyrF) that allows both positive and negative selection in E. coli and M. smegmatis, and unique restriction sites that permit insertion of foreign DNA. Transformation of mycobacteria with this vector results in integration of its DNA into the genomic pyrF locus by either a single or a double homologous recombination event. With this system, the 65-kilodalton Mycobacterium leprae stress protein antigen was inserted into the M. smegmatis genome and expressed. This gene replacement technology, together with a uniquely useful pyrF marker, should be valuable for investigating mycobacterial pathobiology, for the development of candidate mycobacterial vaccine vehicles, and as a model for the development of molecular genetic systems in other pathogenic microorganisms.     

Development of pyrF-based gene knockout systems for genome-wide manipulation of the archaea Haloferax mediterranei and Haloarcula hispanica

The haloarchaea Haloferax mediterranei and Haloarcula hispanica are both polyhydroxyalkanoate producers in the domain Archaea, and they are becoming increasingly attractive for research and biotechnology due to their unique genetic and metabolic features. To accelerate their genome-level genetic and metabolic analyses, we have developed specific and highly efficient gene knockout systems for these two haloarchaea. These gene knockout systems consist of a suicide plasmid vector with the pyrF gene as the selection marker and a uracil auxotrophic haloarchaeon (ΔpyrF) as the host. For in-frame deletion of a target gene, the suicide plasmid carrying the flanking region of the target gene was transferred into the corresponding ΔpyrF host. After positive selection of the single-crossover integration recombinants (pop-in) on AS-168SY medium without uracil and counterselection of the double-crossover pyrF-excised recombinants (pop-out) with 5-fluoroorotic acid (5-FOA), the target gene knockout mutants were confirmed by PCR and Southern blot analysis. We have demonstrated the effectiveness of these systems by knocking out the crtB gene which encodes a phytoene synthase in these haloarchaea. In conclusion, these well-developed knockout systems would greatly accelerate the functional genomic research of these halophilic archaea.     

Establishment of a selection marker recycling system for sequential transformation of the plant-pathogenic fungus Colletotrichum orbiculare

Genome sequencing of pathogenic fungi has revealed the presence of various effectors that aid pathogen invasion by the manipulation of plant immunity. Effectors are often individually dispensable because of duplication and functional redundancy as a result of the arms race between host plants and pathogens. To study effectors that have functional redundancy, multiple gene disruption is often required. However, the number of selection markers that can be used for gene targeting is limited. Here, we established a marker recycling system that allows the use of the same selection marker in successive transformations in the model fungal pathogen Colletotrichum orbiculare, a causal agent of anthracnose disease in plants belonging to the Cucurbitaceae. We identified two C. orbiculare homologues of yeast URA3/pyrG, designated as URA3A and URA3B, which can be used as selection markers on medium with no uridine. The gene can then be removed from the genome via homologous recombination when the fungus is grown in the presence of 5-fluoroorotic acid (5-FOA), a chemical that is converted into a toxin by URA3 activity. The ura3a/b double mutants showed auxotrophy for uridine and insensitivity to 5-FOA. Using the ura3a/b mutants, transformation with the URA3B marker and its removal were successfully applied to disrupt the virulence-related gene, PKS1. The pks1 mutants showed a reduction in virulence, demonstrating that the method can be used to study virulence-related genes in C. orbiculare. The establishment of a URA3-based marker recycling system in plant-pathogenic fungi enables the genetic analysis of multiple genes that have redundant functions, including effector genes.     

Sequential gene disruption in Candida albicans by FLP-mediated site-specific recombination

The genetic manipulation of the human fungal pathogen Candida albicans is difficult because of its diploid genome, the lack of a known sexual phase and its unusual codon usage. We devised a new method for sequential gene disruption in C. albicans that is based on the repeated use of the URA3 marker for selection of transformants and its subsequent deletion by FLP-mediated, site-specific recombination. A cassette was constructed that, in addition to the URA3 selection marker, contained an inducible SAP2P-FLP fusion and was flanked by direct repeats of the minimal FLP recognition site (FRT). This URA3 flipper cassette was used to generate homozygous C. albicans mutants disrupted for both alleles of either the CDR4 gene, encoding an ABC transporter, or the MDR1 gene, encoding a membrane transport protein of the major facilitator superfamily. After insertion of the URA3 flipper into the first copy of the target gene, the whole cassette could be efficiently excised by induced FLP-mediated recombination, leaving one FRT site in the disrupted allele of the target gene. The URA3 flipper was then used for another round of mutagenesis to disrupt the second allele. Deletion of the cassette from primary and secondary transformants occurred exclusively by intrachromosomal recombination of the FRT sites flanking the URA3 flipper, whereas interchromosomal recombination between FRT sites on the homologous chromosomes was never observed. This new gene disruption strategy facilitates the generation of specific, homozygous C. albicans mutants as it eliminates the need for a negative selection scheme for marker deletion and minimizes the risk of mitotic recombination in sequential disruption experiments.     

BAPJ69-4A: A yeast two-hybrid strain for both positive and negative genetic selection

Genetic selection systems, such as the yeast two-hybrid system, are efficient methods to detect protein-protein and protein-ligand interactions. These systems have been further developed to assess negative interactions, such as inhibition, using the URA3 genetic selection marker. Previously, chemical complementation was used to assess positive selection in Saccharomyces cerevisiae. In this work, a new S. cerevisiae strain, called BAPJ69-4A, containing three selective markers ADE2, HIS3, and URA3 as well as the lacZ gene controlled by Gal4 response elements, was developed and characterized using the retinoid X receptor (RXR) and its ligand 9-cis retinoic acid (9cRA). Further characterization was performed using RXR variants and the synthetic ligand LG335. To assess the functionality of the strain, RXR was compared to the parent strain PJ69-4A in adenine, histidine, and uracil selective media. In positive selection, associating partners that lead to cell growth were observed in all media in the presence of ligand, whereas partners that did not associate due to the absence of ligand displayed no growth. Conversely, in negative selection, partners that did not associate in 5-FOA medium did not display cell death due to the lack of expression of the URA3 gene. The creation of the BAPJ69-4A yeast strain provides a high-throughput selection system, called negative chemical complementation, which can be used for both positive and negative selection, providing a fast, powerful tool for discovering novel ligand receptor pairs for applications in drug discovery and protein engineering.     

Development of an integrative DNA transformation system for the yeast Candida tropicalis.

We developed the alkane and fatty-acid utilizing yeast Candida tropicalis as a host for DNA transformations. The system is based on an auxotrophic mutant host of C. tropicalis which is defective in orotidine monophosphate decarboxylase (ura3). The ura3 host was isolated by mutagenesis and a double-selection procedure that combined nystatin enrichment selection and 5-fluoro-orotic acid resistance selection. As a selectable marker, we isolated and characterized the C. tropicalis URA3 gene. Plasmid vectors that contained the C. tropicalis URA3 gene transformed the C. tropicalis mutant host at a frequency of 10(3) to 10(4) transformants per micrograms of plasmid DNA. Vectors that contained the Saccharomyces cerevisiae URA3 gene could not transform C. tropicalis. DNA transfer was accomplished by modified versions of either spheroplast generation (CaCl2-polyethylene glycol)-fusion or cation (LiCl) procedures developed for S. cerevisiae. Plasmid vectors that had been cut within the C. tropicalis URA3 fragment integrated by homologous recombination at the URA3 locus.     

Targeted gene disruption by homologous recombination in the hyperthermophilic archaeon Thermococcus kodakaraensis KOD1

In contrast to the high accumulation in sequence data for hyperthermophilic archaea, methodology for genetically manipulating these strains is still at an early stage. This study aimed to develop a gene disruption system for the hyperthermophilic euryarchaeon Thermococcus kodakaraensis KOD1. Uracil-auxotrophic mutants with mutations in the orotidine-5'-monophosphate decarboxylase gene (pyrF) were isolated by positive selection using 5-fluoroorotic acid (5-FOA) and used as hosts for further transformation experiments. We then attempted targeted disruption of the trpE locus in the host strain by homologous recombination, as disruption of trpE was expected to result in tryptophan auxotrophy, an easily detectable phenotype. A disruption vector harboring the pyrF marker within trpE was constructed for double-crossover recombination. The host cells were transformed with the exogenous DNA using the CaCl(2) method, and several transformants could be selected based on genetic complementation. Genotypic and phenotypic analyses of a transformant revealed the unique occurrence of targeted disruption, as well as a phenotypic change of auxotrophy from uracil to tryptophan caused by integration of the wild-type pyrF into the host chromosome at trpE. As with the circular plasmid, gene disruption with linear DNA was also possible when the homologous regions were relatively long. Shortening these regions led to predominant recombination between the pyrF marker in the exogenous DNA and the mutated allele on the host chromosome. In contrast, we could not obtain trpE disruptants by insertional inactivation using a vector designed for single-crossover recombination. The gene targeting system developed in this study provides a long-needed tool in the research on hyperthermophilic archaea and will open the way to a systematic, genetic approach for the elucidation of unknown gene function in these organisms.     

PCR- and ligation-mediated synthesis of split-marker cassettes with long flanking homology regions for gene disruption in Candida albicans

Because Candida albicans is a diploid organism, two consecutive steps of gene disruption are required to generate a gene knock-out. The same marker (URA3) is often used for disruption of both copies of the gene. This is possible because, after the first round of disruption, homologous recombination between direct repeats flanking the URA3 marker and the subsequent counterselection allow for the efficient recovery of Ura- revertants. Unfortunately, the URA-blaster disruption cassette cannot be used in a PCR-based disruption approach. The hisG repeats flanking the URA3 gene in the disruption cassette anneal to one another during PCR and thereby prevent amplification of the complete cassette. We explored the use of transformation based on split-marker recombination to circumvent this problem. To avoid any cloning steps and to retain the advantage of long flanking regions for disruption, we combined this with a PCR- and ligation-mediated approach for generating marker cassettes. We used this approach to disrupt the C. albicans FAL1 (ATP-dependent RNA helicase) gene. Long 5' and 3' FAL1-specific regions were amplified by PCR and individually ligated to a URA-blaster cassette. The resulting ligation reactions were used separately as templates to generate two FAL1 disruption cassettes with overlapping URA3 marker regions. Simultaneous transformation with both overlapping disruption cassettes yielded efficient disruption of one FAL1 allele.     

Complementation of an Escherichia coli pyrF mutant with DNA from Desulfovibrio vulgaris.

A PyrF- mutant of Escherichia coli (SK1108, pyrF::Tn5 Kanr) was complemented with the Desulfovibrio vulgaris (Hildenborough) structural gene for orotidine-5'-phosphate decarboxylase (EC 4.1.1.23). Either orientation of a 1.6-kilobase-pair D. vulgaris DNA fragment (pLP3B or pLP3A) complemented the PyrF- strain suggesting that the D. vulgaris pyrF promoter was functional. The apparent product of the D. vulgaris pyrF gene was a single 26-kilodalton polypeptide. These results demonstrate the utility of E. coli cloning systems in studying metabolic and energetic pathways in sulfate-reducing bacteria.     

Natural competence in the hyperthermophilic archaeon Pyrococcus furiosus facilitates genetic manipulation: construction of markerless deletions of genes encoding the two cytoplasmic hydrogenases

In attempts to develop a method of introducing DNA into Pyrococcus furiosus, we discovered a variant within the wild-type population that is naturally and efficiently competent for DNA uptake. A pyrF gene deletion mutant was constructed in the genome, and the combined transformation and recombination frequencies of this strain allowed marker replacement by direct selection using linear DNA. We have demonstrated the use of this strain, designated COM1, for genetic manipulation. Using genetic selections and counterselections based on uracil biosynthesis, we generated single- and double-deletion mutants of the two gene clusters that encode the two cytoplasmic hydrogenases. The COM1 strain will provide the basis for the development of more sophisticated genetic tools allowing the study and metabolic engineering of this important hyperthermophile.     

Features of the replicon of plasmid pAM10.6 of Pseudomonas fluorescens

We describe features of the basic replicon of the 10.6-kb medium-copy-number plasmid pAM10.6. pAM10.6 was able to replicate in various Pseudomonas strains but was maintained in Escherichia coli only after the p15A origin of replication was inserted. Deletion analysis suggests that the pAM10.6 origin of replication is located in a 0.5-kb region that includes inverted and direct repeats upstream of the repA gene. RepA (204 aa) has a clear homology to plasmid replication proteins of some other gram-negative bacteria. The pas (plasmid addiction system) (genes encoded in the region of 480-bp) stabilizes plasmid maintenance in P. putida cells under nonselective conditions for at least 200 generations. A 3.75-kb PstI fragment of pAM10.6 joined to a Km(r) gene was shown to be a minimal plasmid unit maintained in P. putida as a monomer. Further deletions of this 3.75-kb fragment caused a drive to form stable head-to-tail dimeric plasmids in P. putida.