Biodegradation of feather waste by keratinase produced from newly isolated Bacillus licheniformis ALW1

Keratinase are proteolytic enzymes which have gained much attention to convert keratinous wastes that cause huge environmental pollution problems. Ten microbial isolates were screened for their keratinase production. The most potent isolate produce 25.2?U/ml under static condition and was primarily identified by partial 16s rRNA gene sequence as Bacillus licheniformis ALW1. Optimization studies for the fermentation conditions increased the keratinase biosynthesis to 72.2?U/ml (2.9-fold). The crude extracellular keratinase was optimally active at pH 8.0 and temperature 65?°C with 0.7% soluble keratin as substrate. The produced B. licheniformis ALW1 keratinase exhibited a good stability over pH range from 7 to 9 and over a temperature range 50–60?°C for almost 90?min. The crude enzyme solution was able to degrade native feather up to 63% in redox free system.     

Production of xylanases by mangrove fungi from the Philippines and their application in enzymatic pretreatment of recycled paper pulps

Mangrove fungi are vastly unexplored for enzymes with industrial application. This study aimed to assess the biocatalytic activity of mangrove fungal xylanases on recycled paper pulp. Forty-four mangrove fungal (MF) isolates were initially screened for xylanolytic activity in minimal medium with corn cob xylan as the sole carbon source. Eight MF were further cultivated under submerged fermentation for the production of crude xylanases. These crude enzymes were then characterized and tested for the pretreatment of recycled paper pulps. Results showed that 93 % of the tested MF isolates exhibited xylanolytic activity in solid medium. In submerged fermentation, salinity improved the growth of the fungal isolates but did not influence xylanase production. The crude xylanases were mostly optimally active at 50 °C and pH 7. Changes in pH had a greater effect on xylanase stability than temperature. More than half of the activity was lost at pH 9 for majority of the crude enzymes. However, two thermophilic xylanases from Fusarium sp. KAWIT-A and Aureobasidium sp. 2LIPA-M and one alkaliphilic xylanase from Phomopsis sp. MACA-J were also produced. All crude enzymes exhibited cellulase activities ranging from 4 to 21 U/ml. Enzymatic pretreatment of recycled paper pulps with 5 % consistency produced 70–650 mg of reducing sugars per gram of pulp at 50 °C after 60 min. The release of high amounts of reducing sugars showed the potential of mangrove fungal crude xylanases in the local paper and pulp industry. The diverse properties shown by the tested crude enzymes also indicate its potential applications to other enzyme-requiring industries.     

A Pyruvated Mannose-Specific Xanthan Lyase Involved in Xanthan Degradation by Paenibacillus alginolyticus XL-1

The xanthan-degrading bacterium Paenibacillus alginolyticus XL-1, isolated from soil, degrades approximately 28% of the xanthan molecule and appears to leave the backbone intact. Several xanthan-degrading enzymes were excreted during growth on xanthan, including xanthan lyase. Xanthan lyase production was induced by xanthan and inhibited by glucose and low-molecular-weight enzymatic degradation products from xanthan. A xanthan lyase with a molecular mass of 85 kDa and a pI of 7.9 was purified and characterized. The enzyme is specific for pyruvated mannosyl side chain residues and optimally active at pH 6.0 and 55°C.     

Studies on xanthan production from Xanthomonas campestris

Xanthan is an heteropolysaccharide produced by Xanthomonascampestris. Xanthan gum fermentation by a local isolate of X. campestris using different carbon sources was studied. The production of polysaccharide was influenced by the carbon source used. The production of the xanthan was 15.654 g/l with synthetic medium. Production of xanthan at various temperatures ranging between 25v°C and 40v°C was studied. The growth and production was maximum between 25-30v°C. Xanthan production was maximum at pH 7.0-7.5.     

The influence of thermal treatment and operational conditions on xanthan produced by X. arboricola pv pruni strain 106

The influence of thermal treatment and operational conditions (pH and stirrer speed) used in the process of xanthan production by Xanthomonas arboricola pv pruni strain 106 were evaluated through yield of xanthan, aqueous solution and fermentation broth viscosity, sodium content, pyruvate and acetyl content and molar mass. Different conditions used during the fermentation affected the xanthan characteristics. Thermal treatment decreased the final yield and pyruvate and acetyl content, and increased the xanthan aqueous solution and fermentation broth viscosities, as well as molar mass. In this study the best combination of yield and viscosity was obtained with the use of pH 7 and 400 rpm during fermentation and post-fermentation thermal treatment. Aggregation of xanthan molecules promoted by heating and detected through an increase of molar mass was apparently affected by the sodium content. As a result, a correlation between molar mass and xanthan solution viscosity could be observed.     

A family 5 β-mannanase from the thermophilic fungus Thielavia arenaria XZ7 with typical thermophilic enzyme features

A novel β-mannanase gene, man5XZ7, was cloned from thermophilic fungus Thielavia arenaria XZ7, and successfully expressed in Pichia pastoris. The gene (1,110 bp) encodes a 369-amino acid polypeptide with a molecular mass of approximately 40.8 kDa. The deduced sequence of Man5XZ7 consists of a putative 17-residue signal peptide and a catalytic module belonging to glycoside hydrolase (GH) family 5, and displays 76 % identity with the experimentally verified GH 5 endo-β-1,4-mannanase from Podospora anserina. Recombinant Man5XZ7 was optimally active at 75 °C and pH?5.0 and exhibited high activity at a wide temperature range (>50.0 % activity at 50–85 °C). Moreover, it had good adaptability to acidic to basic pH (>74.1 % activity at pH?4.0–7.0 and 25.6 % even at pH?9.0) and good stability from pH?3.0 to 10.0. These enzymatic properties showed that Man5XZ7 was a new thermophilic and alkali-tolerant β-mannanase. Further amino acid composition analysis indicated that Man5XZ7 has several characteristic features of thermophilic enzymes.     

Mathematical modeling of maize starch liquefaction catalyzed by α-amylases from Bacillus licheniformis: effect of calcium, pH and temperature

The first step of starch hydrolysis, i.e. liquefaction has been studied in this work. Two commercial α-amylases from Bacilllus licheniformis, known as Termamyl and Liquozyme have been used for this purpose. Using starch as the substrate, kinetics of both enzymes has been determined at optimal pH and temperature (pH 7, T = 80 °C) and at 65 °C and pH 5.5. Michaelis–Menten model with uncompetitive product inhibition was used to describe enzyme kinetics. Mathematical models were developed and validated in the repetitive batch and fed-batch reactor. Enzyme inactivation was described by the two-step inactivation model. All experiments were performed with and without calcium ions. The activities of both tested amylases are approximately one hundred times higher at 80 °C than at 65 °C. Lower inactivation rates of enzymes were noticed in the experiments performed at 65 °C without the addition of calcium than in the experiments at 80 °C. Calcium ions in the reaction medium significantly enhance amylase stability at 80 °C and pH 7. At other process conditions (65 °C and pH 5.5) a weaker calcium stabilizing effect was detected.     

A pyruvated mannose-specific xanthan lyase involved in xanthan degradation by Paenibacillus alginolyticus XL-1.

The xanthan-degrading bacterium Paenibacillus alginolyticus XL-1, isolated from soil, degrades approximately 28% of the xanthan molecule and appears to leave the backbone intact. Several xanthan-degrading enzymes were excreted during growth on xanthan, including xanthan lyase. Xanthan lyase production was induced by xanthan and inhibited by glucose and low-molecular-weight enzymatic degradation products from xanthan. A xanthan lyase with a molecular mass of 85 kDa and a pI of 7.9 was purified and characterized. The enzyme is specific for pyruvated mannosyl side chain residues and optimally active at pH 6.0 and 55 degrees C.     

Optimization of protease production by endophytic fungus,Alternaria alternata,isolated from an Australian native plant

Endophytes are recognised as potential sources of novel secondary metabolites, including enzymes and drugs, with applications in medicine, agriculture and industry. There is a growing need for new enzymes, including proteases, for use in industry that can function under a variety of conditions. In this study, three fungal endophytes (Alternaria alternata, Phoma herbarum and an unclassified fungus), were isolated from the Australian native plant, Eremophilia longifolia, and assessed for production of proteases. The lyophilised growth media obtained after fungal fermentation were analysed for protease production using enzyme activity assays. Protease production was optimised by assessing the effects of temperature, pH, carbon source and nitrogen source on activity. A. alternata showed the greatest protease activity in a wide range of pH (3–9). The broadest activity between 9 and 50 °C was observed at pH 7, suggesting a neutral protease. Overall, the optimum conditions were 37 °C and pH 7 with a maximum specific activity value of 69.86 BAEE units/mg. The characteristics demonstrated by this fungal endophyte showed that it is a potential source of an enzyme with particular application in the dairy industry. However, further studies of the tolerance to higher temperatures and pH will indicate whether the enzyme is suitable to such applications.     

Production, characterization and properties of polysaccharide depolymerizing enzymes from a strain ofCurvularia inaequalis

Xylanase, β-glucosidase, β-xylosidase, endoglucanase and polygalacturonase production fromCurvularia inaequalis was carried out by means of solid-state and submerged fermentation using different carbon sources. β-Glucosidase. β-xylosidase, polygalacturonase and xylanase produced by the microorganisms were characterized. β-Glucosidase presented optimum activity at pH 5.5 whereas xylanase, poly-galacturonase and β-xylosidase activities were optimal at pH 5.0. Maximal activity of β-glucosidase was determined at 60°C, β-xylosidase at 70°C, and polygalacturonase and xylanase at 55°C. These enzymes were stable at acidic to neutral pH and at 40–45 °C. The crude enzyme solution was studied for the hydrolysis of agricultural residues.     

Thermal stability and chain conformational studies of xanthan at different ionic strengths

The aim of the present study was to determine the influence of the ionic strength on the thermal stability of xanthan, i.e. xanthan resistance to chain breaking at high temperatures. Xanthan solutions of various ionic strengths were kept at 80, 90 and 95°C for periods up to 95 h. The thermal stability was determined by measuring the intrinsic viscosity after the heating periods. The experiments showed a critical ionic strength for the thermal stability of xanthan between 10 and 100 mm NaCl or KCl in this temperature range. Below the critical ionic strength the intrinsic viscosity was rapidly reduced, whereas above the critical ionic strength the intrinsic viscosity was virtually unaffected by heating.We then looked for a possible correlation between thermal stability and secondary structure of xanthan. The transition ionic strength (I_m) of xanthan solutions, i.e. where xanthan is midway between an ordered and a disordered structure, was determined by NMR at constant temperatures. I_m was found to be in the range of 24 mm at 80°C to 60 mm NaCl at 95°C, thus lying in the range of the critical ionic strength of the thermal stability. This suggests a close relationship between thermal stability and secondary structure of xanthan, indicated by the enhanced thermal stability in the ordered state. We believe this enhanced thermostability arises from a double-stranded conformation in the ordered state, as in DNA. The presence of double-stranded xanthan is also indicated by electron micrographs taken at both high and low ionic strengths.The transition temperature (T_m) of xanthan was determined by NMR and optical rotation measurements. At the ionic strength of 7·5 mm the two methods resulted in T_m values of 67 and 52°C respectively. This difference in T_m can possibly be due to the fact that the observed NMR and optical rotation (OR) effects are caused by different molecular phenomena.     

Isomerization of glucose to fructose: production and some properties of glucose isomerase from Streptomyces sp. strain C7

Nine strains of actinomycetes isolated from Iraqi soils were investigated for glucose isomerase production. Only one strain, Streptomyces sp., C₇, was active. The maximum conversion ratio of the enzyme for the cells grown in d-xylose medium after 24 h incubation at 70°C and pH 6.9, was 64 and 48% for crude extract and cell-bound enzyme, respectively. The optimum pH value and temperatures for both enzymes were 8.0 and 70°C.     

Production of ethanol from raw cassava starch by a nonconventional fermentation method

Raw cassava root starch was transformed into ethanol in a one-step process of fermentation, in which are combined the conventional processes of liquefaction, saccharification, and fermentation to alcohol. Aspergillus awamori NRRL 3112 and Aspergillus niger were cultivated on wheat bran and used as Koji enzymes. Commercial A. niger amyloglucosidase was also used in this experiment. A raw cassava root homogenate–enzymes–yeast mixture fermented optimally at pH 3.5 and 30°C, for five days and produced ethanol. Alcohol yields from raw cassava roots were between 82.3 and 99.6%. Fungal Koji enzymes effectively decreased the viscosity of cassava root fermentation mashes during incubation. Commercial A. niger amyloglucosidase decreased the viscosity slightly. Reduction of viscosity of fermentation mashes was 40, 84, and 93% by commercial amyloglucosidase, A. awamori, and A. niger enzymes, respectively. The reduction of viscosity of fermentation mashes is probably due to the hydrolysis of pentosans by Koji enzymes.     

Continuous beer fermentation by high cell-density culture of bottom brewer's yeast

Continuous beer production was investigated in a high cell-density culture system which consisted of two stages for the fermentation and sedimentation of yeast cells. The continuous culture was carried out for a fermentation time of 5,500 h without contamination, at varying dilution rates and fermentation temperatures in the ranges of 0.017-0.033 h⁻¹ and 6.5–8.5°C, respectively. This process was found to be suitable for continuous and stable beer brewing. Under these conditions, the cell concentration in the first stage was about 80 times as high as that in the exit of the second stage. Concentrations of viable cells, sugar and ethanol were maintained at 1.3 × 10⁹ cells/ml, 25 and 36 g/l, respectively, and were hardly affected by fermentation temperature. Concentrations of ethyl acetate, isoamyl alcohol and isoamyl acetate were similar in the fermentation temperature ranges of 6.5–8.5°C, and the amounts at a fermentation temperature of 7°C were comparable to those of lager-type beer. Diacetyl flavor, which is known to be an effluent component that causes deterioration in the second stag e (young beer), was maintained at 1.2 ppm at a dilution rate and fermentation temperature of 0.022 h⁻¹ and 7°C, respectively. The diacetyl flavor was due to the accumulation of vicinal diketone, the precursor of which is acetohydroxy acid. The acetohydroxy acid was converted to vicinal diketone by pretreatment at 60°C for 30 min. The vicinal diketone was then consumed by the yeast during after-fermentation at a fermentation temperature of 3°C. Using this method, total vicinal diketone decreased below 0.3 ppm for an after-fermentation time of 6.8 h, which was 225 times as fast as that of after-fermentation without the pretreatment. This process may make it possible to achieve continuous beer fermentation from the fermentation stage to after-fermentation for diacetyl removal.     

Purification and Characterization of Soymilk-clotting Enzymes from Bacillus sp. K-295G-7

Enzymes I and II, which have a high soymilk-clotting activity, produced from K-295G-7 were purified by chromatographies on Sephadex G-100, CM-cellulose, hydroxylapatite, and 2nd Sephadex G-100.

The two purified enzymes were found to be homogeneous by polyacrylamide gel elec-trophoresis (PAGE) at pH 4.3. The molecular weights of enzymes I and II were 28,000 and 29,500 by SDS-PAGE, and their isoelectric points were 9.22 and 9.45, respectively. Enzymes I and II coagulated soymilk optimally at 65°C and were stable up to 45°C. Both enzymes were most active at pH 5.8, for soymilk coagulation between pH 5.8 to 6.7, and were stable with about 50 ~ 100% of the original activity from pH 5 to 10.

Each of the purified enzymes was a serine protease with an optimum pH of 9.0 for soy protein isolate (SPI) and casein digestions, because these enzymes were inhibited completely by diisopropylfluoro-phosphate (DFP).

The soymilk-clotting activity to proteolytic activity ratio of the enzyme II was 3 times higher than that of enzyme I. Enzymes I and II were more sensitive to the calcium ion concentration in soymilk than bromelain is.     

Production of endoxylanase with enhanced thermostability by a novel polyextremophilic Bacillus halodurans TSEV1 and its applicability in waste paper deinking

The screening and selection of the culture variables followed by optimization using statistical approaches led to a 23-fold enhancement in thermo-alkali-stable xylanase production by the polyextremophilic Bacillus halodurans TSEV1. The optimization of crucial parameters involved in the extraction of xylanase from the bacterial bran led to a high enzyme recovery. The purified xylanase produced in submerged fermentation (SmF) and solid state fermentation (SSF) was visualized as a single band on SDS-PAGE with a molecular mass of 40 kDa. The SSF-xylanase is optimally active at 78 °C and pH 9.0 and stable in the pH range between 7.0 and 12.0 with a T_1/2 of 65 min at 90 °C, which is higher than that of SmF-xylanase. The higher activation energy, enthalpy of deactivation (ΔH*), free energy change of deactivation (ΔG*) and T_1/2 of SSF-xylanase than these of SmF xylanase further confirmed higher thermostability of the former than the latter. The combination of commercial cellulase and TSEV1 xylanase was highly effective in deinking of waste paper at alkaline pH and elevated temperatures.     

Xylose fermentation by Candida shehatae and Pichia stipitis: effects of pH,temperature and substrate concentration

The effects of temperature, pH and xylose concentration on the fermentation parameters of Candida shehatae and Pichia stipitis were evaluated. The optimum pH was in the region of pH 4–5.5, with an optimum fermentation temperature of 30°C. Maximum fermentation rates were reached at 50 g l⁻¹ xylose. A maximum volumetric ethanol productivity of about 0.9 g (l h)⁻¹ was obtained with both yeast strains. The ethanol yield of C. shehatae decreased considerably when cultivated above 30°C or when the xylose concentration was increased. Xylitol accumulated concomitantly. Xylitol production by P. stipitis was observed only during cultivation at 36°C. Whereas the ethanol yield of C. shehatae was usually about 75% of the theoretical maximum, it was 85–90% with P. stipitis.     

Optimization of the pilot-scale production of an ice-binding protein by fed-batch culture of Pichia pastoris

Ice-binding proteins (IBPs) can bind to the ice crystal and inhibit its growth. Because this property of IBPs can increase the freeze–thaw survival of cells, IBPs have attracted the attention from industries for their potential use in biotechnological applications. However, their use was largely hampered by the lack of the large-scale recombinant production system. In this study, the codon-optimized IBP from Leucosporidium sp. (LeIBP) was constructed and subjected to high-level expression in methylotrophic Pichia pastoris system. In a laboratory-scale fermentation (7 L), the optimal induction temperature and pH were determined to be 25 °C and 6.0, respectively. Further, employing glycerol fed-batch phase prior to methanol induction phase enhanced the production of recombinant LelBP (rLeIBP) by ～100 mg/l. The total amount of secreted proteins at these conditions (25 °C, pH?6.0, and glycerol fed-batch phase) was ～443 mg/l, 60 % of which was rLeIBP, yielding ～272 mg/l. In the pilot-scale fermentation (700 L) under the same conditions, the yield of rLeIBP was 300 mg/l. To our best knowledge, this result reports the highest production yield of the recombinant IBP. More importantly, the rLeIBP secreted into culture media was stable and active for 6 days of fermentation. The thermal hysteresis (TH) activity of rLeIBP was about 0.42 °C, which is almost the same to those reported previously. The availability of large quantities of rLeIBP may accelerate further application studies.     

Partial purification of saccharifying and cell wall-hydrolyzing enzymes from malt in waste from beer fermentation broth

A number of hydrolyzing enzymes that are secreted from malt during brewing, including cell wall-hydrolyzing, saccharide-hydrolyzing, protein-degrading, lipid-hydrolyzing, and polyphenol and thiol-hydrolyzing enzymes, are expected to exist in an active form in waste from beer fermentation broth (WBFB). In this study, the existence of these enzymes was confirmed by sodium dodecyl sulfate polyacrylamide gel electrophoresis, after which enzyme extract was partially purified through a series of purification steps. The hydrolyzing enzyme activity was then measured under various conditions at each purification step using carboxymethyl cellulose as a substrate. The best hydrolyzing activities of partially purified enzymes were found at pH 4.5 and 50 °C in a citrate buffer system. The enzymes showed highest thermal stability at 30 °C when exposed for prolonged time. As the temperature increased gradually from 25 to 70 °C, yeast cells in the chemically defined medium with enzyme extract lost their cell wall and viability earlier than those without enzyme extract. Cell wall degradation and the release of cell matrix into the culture media at elevated temperature (45–70 °C) in the presence of enzyme extract were monitored through microscopic pictures. Saccharification enzymes from malt were relatively more active in the original WBFB than supernatant and diluted sediments. The presence of hydrolyzing enzymes from malt in WBFB is expected to play a role in bioethanol production using simultaneous saccharification and fermentation without the need for additional enzymes, nutrients, or microbial cells via a cell-free enzyme system.     

Xanthan Lyase of Bacillus sp. Strain GL1 Liberates Pyruvylated Mannose from Xanthan Side Chains

When the bacterium Bacillus sp. strain GL1 was grown in a medium containing xanthan as the carbon source, the viscosity of the medium decreased in association with growth, showing that the bacterium had xanthan-depolymerizing enzymes. One of the xanthan-depolymerizing enzymes (xanthan lyase) was present in the medium and was found to be induced by xanthan. The xanthan lyase purified from the culture fluid was a monomer with a molecular mass of 75 kDa, and was most active at pH 5.5 and 50°C. The enzyme was highly specific for xanthan and produced pyruvylated mannose. The result indicates that the enzyme cleaved the linkage between the terminal pyruvylated mannosyl and glucuronyl residues in the side chain of xanthan.