Covalent attachment of oligodeoxyribonucleotides to amine-modified Si (001) surfaces

A recently described reaction for the UV-mediated attachment of alkenes to silicon surfaces is utilized as the basis for the preparation of functionalized silicon surfaces. UV light mediates the reaction of t-butyloxycarbonyl (t-BOC) protected ω-unsaturated aminoalkane (10-aminodec-1-ene) with hydrogen-terminated silicon (001). Removal of the t-BOC protecting group yields an aminodecane-modified silicon surface. The resultant amino groups can be coupled to thiol-modified oligodeoxyribonucleotides using a heterobifunctional crosslinker, permitting the preparation of DNA arrays. Two methods for controlling the surface density of oligodeoxyribonucleotides were explored: in the first, binary mixtures of 10-aminodec-1-ene and dodecene were utilized in the initial UV-mediated coupling reaction; a linear relationship was found between the mole fraction of aminodecene and the density of DNA hybridization sites. In the second, only a portion of the t-BOC protecting groups was removed from the surface by limiting the time allowed for the deprotection reaction. The oligodeoxyribonucleotide-modified surfaces were extremely stable and performed well in DNA hybridization assays. These surfaces provide an alternative to gold or glass for surface immobilization of oligonucleotides in DNA arrays as well as a route for the coupling of nucleic acid biomolecular recognition elements to semiconductor materials.     

DNA microarrays with PAMAM dendritic linker systems

The DNA microarray-based analysis of single nucleotide polymorphisms (SNPs) is important for the correlation of genetic variations and individual phenotypes, and for locating disease-causing genes. To facilitate the development of surfaces suitable for immobilization of oligonucleotides, we report here a novel method for the surface immobilization of DNA using pre-fabricated polyamidoamine (PAMAM) starburst dendrimers as mediator moieties. Dendrimers containing 64 primary amino groups in their outer sphere are covalently attached to silylated glass supports and, subsequently, the dendritic macromolecules are modified with glutaric anhydride and activated with N-hydroxysuccinimide. As a result of the dendritic PAMAM linker system the surfaces reveal both a very high immobilization efficiency for amino-modified DNA-oligomers, and also a remarkable high stability during repeated regeneration and re-using cycles. The performance of dendrimer-based DNA microarrays in the discrimination of SNPs is demonstrated.     

Oligonucleotide immobilization on micropatterned streptavidin surfaces

We describe a simple procedure for photolithographic patterning of streptavidin on silicon substrates. Long wavelength UV (365 nm) light was used to direct the covalent attachment of photoactivatable biotin onto silylated silicon wafers. Fluorescently labeled streptavidin was found to bind only in areas exposed to the light. We used this procedure to selectively pattern streptavidin inside microwells etched in silicon, and we investigated the binding characteristics of biotinylated oligonucleotides of lengths, n = 16, 54 and 99 bases. The binding curves were found to fit the functional form of the Langmuir isotherm, with binding saturation proportional to n^–3/4.     

Development of miniaturized immunoassay: Influence of surface chemistry and comparison with enzyme-linked immunosorbent assay and Western blot

Protein microarray technology provides a useful approach for the simultaneous serodetection of various antibodies in low sample volumes. To implement functional protein microarrays, appropriate surface chemistry must be designed so that both the protein structure and the biological activity can be retained. In the current study, two surface chemistries for protein microarrays and immunofluorescent assays were developed. Glass slides were functionalized with N-hydroxysuccinimide (NHS) ester via a monofunctional silane or maleic anhydride-alt-methyl vinyl ether (MAMVE) copolymer to allow covalent grafting of histone proteins. Analytical performance of these microarrays was then evaluated for the detection of anti-histone autoantibodies present in the sera of patients suffering from a systemic autoimmune disease, namely systemic lupus erythematosus (SLE), and the results were compared with those of the classical enzyme-linked immunosorbent assay (ELISA) and Western blot. The detection limit of our MAMVE copolymer microarrays was 50-fold lower than that of the classical ELISA. Furthermore, 100-fold less volume of biological samples was required with these miniaturized immunoassays.     

Synthesis of N-hydroxysuccinimide esters of phosphatidylethanolamine and some properties of liposomes containing these derivatives

The N-hydroxysuccinimide (NHS) ester of N-suberyl-dimyristoylphosphatidylethanolamine (sub-DMPE) was synthesized by reaction of DMPE with disuccinimidyl suberate, and isolated by preparative plate chromatography. Liposomes, which contain NHS-sub-DMPE, can covalently bind compounds that possess a free amino group such as ε-dinitrophenyl-lysine. The extent of DNP-lysine binding is influenced by the time and temperature of incubation, the amount of NHS-sub-DMPE incorporated into the liposomes, and the initial concentration of DNP-lysine. Binding occurs as a consequence of the formation of a new dinitrophenylated compound which has been characterized. Although NHS-sub-DMPE is stable to storage in organic solvents, preformed liposomes rapidly lose their ability to bind DNP-lysine due to hydrolysis of the N-hydroxysuccinimide ester bond. These findings bear on the future applicability of liposomes, containing N-hydroxysuccinimide esters of PE, as illustrated by the preparation of immunogenic liposomes.     

Oligonucleotides form a duplex with non-helical properties on a positively charged surface

The double helix is known to form as a result of hybridization of complementary nucleic acid strands in aqueous solution. In the helix the negatively charged phosphate groups of each nucleic acid strand are distributed helically on the outside of the duplex and are available for interaction with cationic groups. Cation-coated glass surfaces are now widely used in biotechnology, especially for covalent attachment of cDNAs and oligonucleotides as surface-bound probes on microarrays. These cationic surfaces can bind the nucleic acid backbone electrostatically through the phosphate moiety. Here we describe a simple method to fabricate DNA microarrays based upon adsorptive rather than covalent attachment of oligonucleotides to a positively charged surface. We show that such adsorbed oligonucleotide probes form a densely packed monolayer, which retains capacity for base pair-specific hybridization with a solution state DNA target strand to form the duplex. However, both strand dissociation kinetics and the rate of DNase digestion suggest, on symmetry grounds, that the target DNA binds to such adsorbed oligonucleotides to form a highly asymmetrical and unwound duplex. Thus, it is suggested that, at least on a charged surface, a non-helical DNA duplex can be the preferred structural isomer under standard biochemical conditions.     

Detection of DNA and proteins using amorphous silicon ion-sensitive thin-film field effect transistors

Amorphous silicon-based ion-sensitive field-effect transistors (a-Si:H ISFETs) are used for the label-free detection of biological molecules. The covalent immobilization of DNA, followed by DNA hybridization, and of the surface adsorption of oligonucleotides and proteins were detected electronically by the a-Si:H ISFET. The ISFET measurements are performed with an external Ag/AgCl microreference electrode immersed in 100mM phosphate buffer electrolyte with pH 7.0. Threshold voltage shifts in the transfer curve of the ISFETs are observed resulting from successive steps of surface chemical functionalization, covalent DNA attachment to the functionalized surface, surface blocking, and hybridization with a complementary target. The surface sensitivity achieved for DNA oligonucleotides is of the order of 1pmol/cm(2). Point-of-zero charge estimations were made for the functionalized surfaces and for the device surface after DNA immobilization and hybridization. The results show a correlation between the changes in the point-of-zero charge and the shift observed in the threshold voltage of the devices. Electronic detection of adsorbed proteins and DNA is also achieved by monitoring the shifts of the threshold voltage of the ISFETs, with a sensitivity of approximately 50nM.     

Functionalized nanocomposite coating of a glass surface for oligonucleotide immobilization

A new type of coating for manufacturing DNA chips was constructed on the basis of an organicinorganic nanocomposite based on the polyvinylbutyral-tetraethoxysilane copolymer. The organosilicon composite was functionalized by introduction of ethanolamine vinyl ether copolymers, which contain amino groups and anchor vinyloxide units capable of reacting with silanol groups of the nanocomposite. The resulting coatings form a film on glass slides with a high surface density of amino groups (up to 700 groups/nm²) suitable for three-dimensional immobilization of oligonucleotides. The use of bifunctional reagents (e.g., phenylene diisothiocyanate) for the attachment of oligonucleotides bearing amino linkers to the amino-containing surface provides an immobilization density of 0.5–1.6 pmol/mm². Immobilization with a higher density (10–12 pmol/mm²) was achieved for attachment to amino-containing glass slides upon the use of oligonucleotides containing a selectively activated terminal phosphate group. The activation of oligonucleotides was carried out with the triphenylphosphine-dithiodipyridine pair in the presence of dimethylaminopyridine N-oxide. The resulting DNA chips were shown to be useful in principle for DNA detection.     

Invasive cleavage reactions on DNA-modified diamond surfaces

Recently developed DNA-modified diamond surfaces exhibit excellent chemical stability to high-temperature incubations in biological buffers. The stability of these surfaces is substantially greater than that of gold or silicon surfaces, using similar surface attachment chemistry. The DNA molecules attached to the diamond surfaces are accessible to enzymes and can be modified in surface enzymatic reactions. An important application of these surfaces is for surface invasive cleavage reactions, in which target DNA strands added to the solution may result in specific cleavage of surface-bound probe oligonucleotides, permitting analysis of single nucleotide polymorphisms (SNPs). Our previous work demonstrated the feasibility of performing such cleavage reactions on planar gold surfaces using PCR-amplified human genomic DNA as target. The sensitivity of detection in this earlier work was substantially limited by a lack of stability of the gold surface employed. In the present work, detection sensitivity is improved by a factor of approximately 100 (100 amole of DNA target compared with 10 fmole in the earlier work) by replacing the DNA-modified gold surface with a more stable DNA-modified diamond surface.     

Modification of ribonucleic acid by chemical carcinogens. IV. Circular dichroism and proton magnetic resonance studies of oligonucleotides modified with N-2-acetylaminofluorene

The conformational properties of various oligonucleotides modified with the chemical carcinogen N-2-acetylaminofluorene have been investigated utilizing circular dichroism, proton magnetic resonance spectroscopy and computer-generated molecular models. Introduction of the carcinogen, specifically and covalently, at the C-8 position of guanosine residues results in dramatic changes in the ciruclar dichroism spectra of the oligonucleotides. The attachment of N-2-acetylaminofluorene also causes large higher-field shifts for the proton resonances of fluorene and bases adjacent to a modified guanosine residue. These results, together with substantial supporting evidence, show that the covalent binding of N-2-acetylaminofluorene causes important changes in the conformational properties of oligonucleotides in aqueous solution. The major changes include rotation of the guanine base around the glycosidic linkage and the intramolecular stacking of fluorene with an adjacent base. A computer-displayed model of a carcinogen-modified dinucleotide illustrating these effects is presented. The specific conformational changes noted for the oligonucleotides could clearly disrupt the normal biological activity of similarly modified naturally occurring nucleic acids.     

Differences in colonisation of five marine bacteria on two types of glass surfaces

The retention patterns of five taxonomically different marine bacteria after attachment on two types of glass surfaces, as-received and chemically etched, have been investigated. Contact angle measurements, atomic force microscopy (AFM), scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM), X-ray fluorescence spectroscopy (XRF) and X-ray photoelectron spectrometry (XPS) were employed to investigate the impact of nanometer scale surface roughness on bacterial attachment. Chemical modification of glass surfaces resulted in a ～1 nm decrease in the average surface roughness (R _a) and the root-mean-squared roughness (R_q ) and in a ～8 nm decrease in the surface height and the peak-to-peak (R _max) and the 10-point average roughness (R_z ). The study revealed amplified bacterial attachment on the chemically etched, nano-smoother glass surfaces. This was a consistent response, notwithstanding the taxonomic affiliation of the selected bacteria. Enhanced bacterial attachment was accompanied by elevated levels of secreted extracellular polymeric substances (EPS). An expected correlation between cell surface wettability and the density of the bacterial attachment on both types of glass surfaces was also reported, while no correlation could be established between cell surface charge and the bacterial retention pattern.     

Novel Method for the Covalent Immobilization of Oligonucleotides via Diels-Alder Bioconjugation

Abstract

The synthesis of cyclohexadiene and maleimide derivatives and their use for the functionalization of oligonucleotides and the coating of glass surfaces is reported. A method for the covalent attachment of diene or maleimide modified oligonucleotides to the coated glass surfaces via aqueous Diels-Alder reactions is presented.     

Synthesis of 2-acetamido-1-N[N-(tert-butoxycarbonyl)-l-aspart-1-oyl-(l-phenylalanyl-l-serine methyl ester)-4-oyl]-2-deoxy-β-d-glucopyranosylamine and analogs

2-Acetamido-1-N-[N-(tert-butoxycarbonyl)-l-aspart-1-oyl-(l-phenylalanyl-l-serine methyl ester)-4-oyl]-2-deoxy-β-d-glucopyranosylamine and analogs containing d-glucopyranosyl, 4-O-β-d-glucopyranosyl-d-glucopyranosyl, l-Phe-l-Ala, and d-Phe-l-Ser were synthesized by condensation of glycosylamines having free hydroxyl groups with tripeptide esters activated with N-hydroxysuccinimide.     

Reactions of coordinated molecules. 47. Preparation of rhena-β-ketoimine derivatives of iodoacetamide and of an N-hydroxysuccinimide ester: heavy-atom labeling reagents for sulfhydryl and amino groups

A rhena-β-ketoimine complex containing an iodoacetamide moiety has been prepared as a reagent for effecting heavy-atom labeling of molecules containing sulfhydryl groups. This complex reacts with benzyl mercaptan, ethanethiol, N-t-BOC-cystamine, N-acetyl-L-cysteine, and N-acetyl-DL-penicillamine to give the corresponding rhena-labeled derivatives. A rhena-β-ketoimine containing a free carboxylic acid moiety has been converted to its N-hydroxysuccinimide ester. This reagent should be useful in effecting the heavy-atom labeling of molecules containing primary and secondary amino groups.     

Development of a bifunctional crosslinking agent with potential for the preparation of immunotoxins

A new protein crosslinking agent, 2,3-dibromopropionyl-N-hydroxysuccinimide ester, has been synthesized and characterized. The potential use of this compound as a temperature-controllable heterobifunctional crosslinking agent has been investigated using model systems and its reactivity compared with that of chlorambucil-N-hydroxysuccinimide ester. The coupling of¹⁴C-labeled phenylethylamine to lysozyme has been used to illustrate the feasibility of the use of this crosslinking agent for the synthesis of immunotoxins.     

Synthesis and antiviral activity of novel glycyrrhizic acid conjugates with D-amino acid esters

Glycyrrhizic acid (GA) conjugates with methyl and ethyl esters of D-amino acids (D-Trp, D-Phe, D-Tyr, D-Val, D-Leu) have been synthesized by the activated esters method using mixtures of N-hydroxybenzotriazole or N-hydroxysuccinimide with N,N′-dicyclohexylcarbodiimide. GA conjugate with D-Trp ethyl ester exhibited antiviral activity against influenza viruses A/H3N2, A/H1N1/pdm09, A/H5N1, B (SI > 10–29), and HRSV (SI > 25). GA conjugate with D-Trp methyl ester inhibited influenza virus A/H1N1/pdm09 (SI > 30).     

Immobilization of cytochrome c on beaded poly(N-acrylylpyrrolidine)

In order to examine a procedure whereby the points of covalent attachment between the components of a protein-polymer conjugate could be determined, horse heart cytochrome c was attached to a beaded copolymer of N-acrylylpyrrolidine, N,N′-bis(acrylyl)-1,2-diaminoethane and N-acrylyl-1,6-aminohexane through a cleavable azo linkage. Studies of protein removed from this conjugate showed that attachment of the polymer to cytochrome occurred predominantly through single lysine residues on the protein surface; lysine-25 was tentatively identified as the residue most extensively utilized in this way. Protein was also linked to the polymer by two lysine residues and a significant amount of protein was irreversibly attached to the polymer under the reaction conditions used.     

Isolation of isoaccepting tRNAs

The N-hydroxysuccinimide ester of succinated polyethylene oxide (polyethylene glycol 6000) has been prepared. The ester has been used to make the N-acyl derivatives of valyl-tRNA and phenylalanyl-tRNA from E. coli K-12. Because of the large molecular weight, high solubility in phenol, and the binding to Corning porous glass of polyethylene oxide, the acyl derivative, N-(succinated polyethylene oxide)-aminoacyl-tRNA, has been separated from unreacted tRNA. Since the reaction is reasonably specific for the amino group of the amino acid, large purifications have been obtained for tRNA_val and tRNA_phe. Evidence is presented to show that the ester can react with tRNA at a slow rate. The limitations on the purification due to this reaction are quantitatively evaluated. The highest ratios, pmoles aminoacyl-tRNA/ OD₂₆₀, obtained for valyl-tRNA and phenylalanyl-tRNA were 800 and 360.     

Preparation and recognition performance of creatinine-imprinted material prepared with novel surface-imprinting technique

By adopting the novel surface molecular imprinting technique put forward by us not long ago, a creatinine molecule-imprinted material with high performance was prepared. The functional macromolecule polymethacrylic acid (PMAA) was first grafted on the surfaces of micron-sized silica gel particles in the manner of “grafting from” using 3-methacryloxypropyltrimethoxysilane (MPS) as intermedia, resulting in the grafted particles PMAA/SiO₂. Subsequently, the molecular imprinting was carried out towards the grafted macromolecule PMAA using creatinine as template and with ethylene glycol diglycidyl ether (EGGE) as crosslinker by right of the intermolecular hydrogen bonding and electrostatic interaction between the grafted PMAA and creatinine molecules. Finally, the creatinine-imprinted material MIP-PMAA/SiO₂ was obtained. The binding character of MIP-PMAA/SiO₂ for creatinine was investigated in depth with both batch and column methods and using N-hydroxysuccinimide and creatine as two contrast substances, whose chemical structures are similar to creatinine to a certain degree. The experimental results show that the surface-imprinted material MIP-PMAA/SiO₂ has excellent binding affinity and high recognition selectivity for creatinine. Before imprinting, PMAA/SiO₂ particles nearly has not recognition selectivity for creatinine, and the selectivity coefficients of PMAA/SiO₂ for creatinine relative to N-hydroxysuccinimide and creatine are only 1.23 and 1.30, respectively. However, after imprinting, the selectivity coefficients of MIP-PMAA/SiO₂ for creatinine in respect to N-hydroxysuccinimide and creatine are remarkably enhanced to 11.64 and 12.87, respectively, displaying the excellent recognition selectivity and binding affinity towards creatinine molecules.     

Contrast in the Photoelectric Effect of Organic and Biochemical Surfaces: A First Step towards Selective Labeling in Photoelectron Microscopy

The photoelectric effect can provide the physical basis for a new method of mapping organic and biological surfaces. The technique, photoelectron microscopy, is similar to fluorescence microscopy using incident ultraviolet light except that photoejected electrons form the image of the specimen surface. In this work the minimum wavelengths of incident light required to produce an image were determined for the molecules 3,6-bis(dimethylamino)acridine (acridine orange) (I), benzo[a]pyrene (II), N,N,N′,N′-tetraphenylbenzidine (III), and copper phthalocyanine (IV). The photoelectron image thresholds for these compounds are 220 (I), 215 (II), 220 (III), and 240 nm (IV), all ±5 nm. Contrast of I-IV with respect to typical protein, lipid, nucleic acid, and polysaccharide surfaces was examined over the wavelength range 240-180 nm. The low magnification micrographs exhibited bright areas corresponding to I-IV but dark regions for the biochemical surfaces. The high contrast suggests the feasibility of performing extrinsic photoelectron microscopy experiments through selective labeling of sites on biological surfaces.