Thermodynamics of single peptide bond cleavage in bovine pancreatic trypsin inhibitor (BPTI)

A major goal of this paper was to estimate a dynamic range of equilibrium constant for the opening of a single peptide bond in a model protein, bovine pancreatic trypsin inhibitor (BPTI). Ten mutants of BPTI containing a single Xaa-->Met substitution introduced in different parts of the molecule were expressed in Escherichia coli. The mutants were folded, purified to homogeneity, and cleaved with cyanogen bromide to respective cleaved forms. Conformation of the intact mutants was similar to the wildtype, as judged from their circular dichroism spectra. Substantial conformational changes were observed on the chemical cleavage of three single peptide bonds--Met46-Ser, Met49-Cys, and Met53-Thr--located within the C-terminal helix. Cleavage of those peptide bonds caused a significant destabilization of the molecule, with a drop of the denaturation temperature by 56.4 degrees C to 68 degrees C at pH 4.3. Opening of the remaining seven peptide bonds was related to a 10.8 degrees C to 39.4 degrees C decrease in T(den). Free energies of the opening of 10 single peptide bonds in native mutants (Delta G(op,N)) were estimated from the thermodynamic cycle that links denaturation and cleavage free energies. To calculate those values, we assumed that the free energy of opening of a single peptide bond in the denatured state (Delta G(op,D)) was equal to -2.7 kcal/mole, as reported previously. Calculated Delta G(op,N) values in BPTI were in the range from 0.2 to 10 kcal/mole, which was equivalent to a >1 million-fold difference in equilibrium constants. The values of Delta G(op,N) were the largest for peptide bonds located in the C-terminal helix and significantly lower for peptide bonds in the beta-structure or loop regions. It appears that opening constants for single peptide bonds in various proteins span across 33 orders of magnitude. Typical equilibrium values for a single peptide bond opening in a protein containing secondary structure elements fall into negligibly low values, from 10(-3) to 10(-8), and are efficient to ensure stability against proteolysis.     

The structure of denatured bovine pancreatic trypsin inhibitor (BPTI)

In the presence of denaturant and thiol initiator, the native bovine pancreatic trypsin inhibitor (BPTI) denatures by shuffling its native disulfide bonds and converts to a mixture of scrambled isomers. The extent of denaturation is evaluated by the relative yields of the scrambled and native species of BPTI. BPTI is an exceedingly stable molecule and can be effectively denatured only by guanidine thiocyanate (GdmSCN) at concentrations higher than 3-4 M. The denatured BPTI consists of at least eight fractions of scrambled isomers. Their composition varies under increasing concentrations of GdmSCN. In the presence of 6 M GdmSCN, the most predominant fraction of scrambled BPTI accounts for 56% of the total structure of denatured BPTI. Structural analysis reveals that this predominant fraction contains the bead-form isomer of scrambled BPTI, bridged by three pairs of neighboring cysteines, Cys5-Cys14, Cys30-Cys38 and Cys51-Cys55. The extreme conformational stability of BPTI has important implications in its distinctive folding pathway.     

Effect of phospholipids on conformational structure of bovine pancreatic trypsin inhibitor (BPTI) and its thermolabile mutants

The effects of negatively charged phosphatidylserine-prepared membranes (PS) and neutral phosphatidylcholine-prepared membranes (PC) on the structure of wild-type and mutant bovine pancreatic trypsin inhibitor (BPTI) at neutral pH were investigated. The presence of PC did not have any effect on the protein structure while PS induced a non-native structure in three mutant BPTI proteins. However, the negatively charged membrane did not have any effect on wild-type BPTI. The findings revealed that (i) elimination of some disulphide bonds results in dramatic change in protein structure, and, (ii) that this biochemical interaction is surface-driven and electrostatic interactions may play a very strong role in influencing the fore-stated changes in protein structure. Of further interest were the results obtained from investigating the possible role of PS fluidity and concentration in altering mutant. When the value of Gibbs free-energy change of unfolding (DeltaG(U)) was positive, various non-native structures were formed in a concentration-dependent manner. However, when the value of DeltaG(U) was negative, only two types of non-native structures were formed: one with high beta structure content at low PS fluidity state, and the other with a high alpha-helical content at high PS fluidity state. Our study reveals how particular combinations of phospholipid:protein interactions can induce a protein conformation transition from a native to a non-native one at neutral pH, especially when the native structure is predestabilized by amino acid substitutions. This revelation may open up opportunities to explore alternative ways in which phospholipids may play a role in protein mis-folding and the related pathologies.     

Folding of bovine pancreatic trypsin inhibitor (BPTI) variants in which almost half the residues are alanine

Recent studies indicate that a fraction of the information contained in an amino acid sequence may be sufficient for specifying a native protein structure. An earlier alanine-scanning experiment conducted on bovine pancreatic trypsin inhibitor (BPTI; 58 residues) suggested that if cumulative mutations have additive effects on protein stability, a native protein structure could be built from BPTI sequences that contained many alanine residues distributed throughout the protein. To test this hypothesis, we designed and produced six BPTI mutants containing from 21 to 29 alanine residues. We found that the melting temperature of mutants containing up to 27 alanine residues (48 % of the total number of residues) could be predicted quite well by the sum of the change in melting temperature for the single mutations. Additionally, these same mutants folded into a native-like structure, as judged by their cooperative thermal denaturation curves and heteronuclear multiple quantum correlation (HMQC) NMR spectra. A BPTI mutant containing 22 alanine residues was further shown by 2D and 3D-NMR to fold into a structure very similar to that of native BPTI, and to be a functional trypsin inhibitor. These results provide insight into the extent to which native protein structure and function can be achieved with a highly simplified amino acid sequence.     

Synthesis and characterization of a beta-hairpin peptide that represents a 'core module' of bovine pancreatic trypsin inhibitor (BPTI)

A new strategy for the design and construction of peptide fragments that can achieve defined, nativelike secondary structure is presented. The strategy is based upon the hypothesis that 'core elements' of a protein, synthesized in a single polypeptide molecule, will favor nativelike structure, and that by incorporating a cross-link, nativelike core structure will dominate the ensemble as the more extended conformations are excluded. 'Core elements' are the elements of packed secondary structure that contain the slowest exchanging backbone amide protons in the native protein. The 'core elements' in bovine pancreatic trypsin inhibitor (BPTI) are the two long strands of antiparallel beta-sheet (residues 18-24 and 29-35) and the small beta-bridge (residues 43-44). To test the design strategy, we synthesized an 'oxidized core module', which contains the antiparallel strands connected by a modified reverse turn (A27 replaced by D), a natural disulfide cross-link at the open end of the hairpin, and N- and C-termini blocking groups. A peptide with identical sequence but lacking the disulfide cross-link at the open end was used as the 'reduced core module' control. The conformational behavior of both peptides was examined using (1)H NMR spectroscopy. Chemical shift dispersion, chemical shift deviation from random coil values, sequential and long-range NOEs, and H/D amide exchange rates were compared for the two peptides. We conclude that the ensemble of oxidized and reduced core module conformations samples both nativelike 4:4 and non-native 3:5 beta-hairpin structure, and that the oxidized module samples nativelike structure for a greater fraction of the time than the reduced module.     

Toward new designed proteins derived from bovine pancreatic trypsin inhibitor (BPTI): covalent cross-linking of two 'core modules' by oxime-forming ligation

A 25-residue disulfide-cross-linked peptide, termed 'oxidized core module' (OxCM), that includes essentially all of the secondary structural elements of bovine pancreatic trypsin inhibitor (BPTI) most refractory to hydrogen exchange, was shown previously to favor nativelike beta-sheet structure [Carulla, N., Woodward, C., and Barany, G. (2000) Synthesis and Characterization of a beta-Hairpin Peptide That Represents a 'Core Module' of Bovine Pancreatic Trypsin Inhibitor (BPTI). Biochemistry 39, 7927-7937]. The present work prepares to explore the hypothesis that the energies of nativelike conformations, relative to other possible conformations, could be decreased further by covalent linkage of two OxCMs. Optimized syntheses of six approximately 50-residue OxCM dimers are reported herein, featuring appropriate monomer modifications followed by oxime-forming ligation chemistry to create covalent cross-links at various positions and with differing lengths. Several side reactions were recognized through this work, and modified procedures to lessen or mitigate their occurrence were developed. Particularly noteworthy, guanidine or urea denaturants that were included as peptide-solubilizing components for some reaction mixtures were proven to form adducts with glyoxylyl moieties, thus affecting rates and outcomes. All six synthetic OxCM dimers were characterized by 1D (1)H NMR; three of them showed considerable chemical shift dispersion suggestive of self-association and mutual stabilization between the monomer units.     

Flexibility of bovine pancreatic trypsin inhibitor

The native conformation of a protein may be expressed in terms of the dihedral angles, phi's and psi's for the backbone, and kappa's for the side chains, for a given geometry (bond lengths and bond angles). We have developed a method to obtain the dihedral angles for a low-energy structure of a protein, starting with the X-ray structure; it is applied here to examine the degree of flexibility of bovine pancreatic trypsin inhibitor. Minimization of the total energy of the inhibitor (including nonbonded, electrostatic, torsional, hydrogen bonding, and disulfide loop energies) yields a conformation having a total energy of -221 kcal/mol and a root mean square deviation between all atoms of the computed and experimental structures of 0.63 A. The optimal conformation is not unique, however, there being at least two other conformations of low-energy (-222 and -220 kcal/mol), which resemble the experimental one (root mean square deviations of 0.66 and 0.64 A, respectively). These three conformations are located in different positions in phi, psi space, i.e., with a total deviation of 81 degrees, 100 degrees and 55 degrees from each other (with a root mean square deviation of several degrees per dihedral angle from each other). The nonbonded energies of the backbones, calculated along lines in phi, psi space connecting these three conformations, are all negative, without any intervening energy barriers (on an energy contour map in the phi, psi plane). Side chains were attached at several representative positions in this plane, and the total energy was minimized by varying the kappa's. The energies were of approximately the same magnitude as the previous ones, indicating that the conformation of low energy is flexible to some extent in a restricted region of phi, psi space. Interestingly, the difference delta phi i+1 in phi i+1 for the (i + 1)th residue from one conformation to another is approximately the same as -delta psi i for the ith residue; i.e., the plane of the peptide group between the ith and (i + 1)th residues re-orient without significant changes in the positions of the other atoms. The flexibility of the orientations of the planes of the peptide groups is probably coupled in a cooperative manner to the flexibility of the positions of the backbone and side-chain atoms.     

Hydrogen exchange kinetics of bovine pancreatic trypsin inhibitor beta-sheet protons in trypsin-bovine pancreatic trypsin inhibitor, trypsinogen-bovine pancreatic trypsin inhibitor, and trypsinogen-isoleucylvaline-bovine pancreatic trypsin inhibitor

Hydrogen exchange rates of six beta-sheet peptide amide protons in bovine pancreatic trypsin inhibitor (BPTI) have been measured in free BPTI and in the complexes trypsinogen-BPTI, trypsinogen-Ile-Val-BPTI, bovine trypsin-BPTI, and porcine trypsin-BPTI. Exchange rates in the complexes are slower for Ile-18, Arg-20, Gln-31, Phe-33, Tyr-35, and Phe-45 NH, but the magnitude of the effect is highly variable. The ratio of the exchange rate constant in free BPTI to the exchange rate constant in the complex, k/kcpIx, ranges from 3 to much greater than 10(3). Gln-31, Phe-45, and Phe-33 NH exchange rate constants are the same in each of the complexes. For Ile-18 and Tyr-35, k/kcpIx is much greater than 10(3) for the trypsin complexes but is in the range 14-43 for the trypsinogen complexes. Only the Arg-20 NH exchange rate shows significant differences between trypsinogen-BPTI and trypsinogen-Ile-Val-BPTI and between porcine and bovine trypsin-BPTI.     

The structure of the complex formed by bovine trypsin and bovine pancreatic trypsin inhibitor

The structure of the complex between anhydro-trypsin and pancreatic trypsin inhibitor has been determined by difference Fourier techniques using phases obtained from the native complex (Huber et al., 1974). It was refined independently by constrained crystallographic refinement at 1.9 å resolution. The anhydro-complex has Ser 195 converted to dehydro-alanine. There were no other significant structural changes. In particular, the high degree of pyramidalization of the C atom of Lys 15 (I) of the inhibitor component observed in the native complex is maintained in the anhydro-species.     

NMR structures of two variants of bovine pancreatic trypsin inhibitor (BPTI) reveal unexpected influence of mutations on protein structure and stability

Here we determined NMR solution structures of two mutants of bovine pancreatic trypsin inhibitor (BPTI) to reveal structural reasons of their decreased thermodynamic stability. A point mutation, A16V, in the solvent-exposed loop destabilizes the protein by 20 degrees C, in contrast to marginal destabilization observed for G, S, R, L or W mutants. In the second mutant introduction of eight alanine residues at proteinase-contacting sites (residues 11, 13, 17, 18, 19, 34, 37 and 39) provides a protein that denatures at a temperature about 30 degrees C higher than expected from additive behavior of individual mutations. In order to efficiently determine structures of these variants, we applied a procedure that allows us to share data between regions unaffected by mutation(s). NOAH/DYANA and CNS programs were used for a rapid assignment of NOESY cross-peaks, structure calculations and refinement. The solution structure of the A16V mutant reveals no conformational change within the molecule, but shows close contacts between V16, I18 and G36/G37. Thus, the observed 4.3kcal/mol decrease of stability results from a strained local conformation of these residues caused by introduction of a beta-branched Val side-chain. Contrary to the A16V mutation, introduction of eight alanine residues produces significant conformational changes, manifested in over a 9A shift of the Y35 side-chain. This structural rearrangement provides about 6kcal/mol non-additive stabilization energy, compared to the mutant in which G37 and R39 are not mutated to alanine residues.     

Influence of pressure on structure and dynamics of bovine pancreatic trypsin inhibitor (BPTI): small angle and quasi-elastic neutron scattering studies

We have studied the influence of pressure on structure and dynamics of a small protein belonging to the enzymatic catalysis: the bovine pancreatic trypsin inhibitor (BPTI). Using a copper-beryllium high-pressure cell, we have performed small angle neutron scattering (SANS) experiment on NEAT spectrometer at HMI (Berlin, Germany). In the SANS configuration, the evolution of the radius of gyration and of the shape of the protein under pressures up to 6,000 bar has been studied. When increasing pressure from atmospheric pressure up to 6,000 bar, the pressure effects on the global structure of BPTI result on a reduction of the radius of gyration from 13.4 A down to 12.0 A. Between 5,000 and 6,000 bar, some transition already detected by FTIR [N. Takeda, K. Nakano, M. Kato, Y. Taniguchi, Biospectroscopy, 4, 1998, pp. 209-216] is observed. The pressure effect is not reversible because the initial value of the radius of gyration is not recovered after pressure release. By extending the range of wave-vectors to high q, we have observed a change of the form factor (shape) of the BPTI under pressure. At atmospheric pressure BPTI exhibits an ellipsoidal form factor that is characteristic of the native state. When the pressure is increased from atmospheric pressure up to 6,000 bar, the protein keeps its ellipsoidal shape. The parameters of the ellipsoid vary and the transition detected between 5,000 and 6,000 bar in the form factor of BPTI is in agreement with the FTIR results. After pressure release, the form factor of BPTI is characteristic of an ellipsoid of revolution with a semi-axis a, slightly elongated with respect to that of the native one, indicating that the pressure-induced structural changes on the protein are not reversible. The global motions and the internal dynamics of BPTI protein have been investigated in the same pressure range by quasi-elastic neutron scattering experiments on IN5 time-of-flight spectrometer at ILL (Grenoble, France). The diffusion coefficients D and the internal relaxation times of BPTI deduced from the analysis of the intermediate scattering functions show a slowing down of protein dynamics when increasing pressure.     

Screening for stable mutants with amino acid pairs substituted for the disulfide bond between residues 14 and 38 of bovine pancreatic trypsin inhibitor (BPTI)

We have developed a screening method to identify stable protein mutants from a large number of sequences using a cellular quality control system. This method was used to screen amino acid pairs substituted for the disulfide (S-S) bond between residues 14 and 38 of bovine pancreatic trypsin inhibitor. The mutants selected could be divided into two groups: one with mutation C14G and the other with mutation C38V. Although each mutation did not fully compensate for the destabilizing effect of removal of the S-S bond, these mutants have midpoint temperatures of thermal unfolding that are 12-17 degrees C higher than that of the C14A/C38A mutant. This fact indicates that these mutations are better substitutions for the S-S bond than C14A/C38A. The C14G mutants inhibited trypsin more strongly at 37 degrees C than did the C14A/C38A mutant, although bulky amino acids at position 14 largely diminished the inhibitory activity of the C38V mutants. Thermodynamic analysis indicated that the enthalpy of unfolding of the C14G and C38V mutant groups differed considerably, which suggests different stabilizing mechanisms in these two groups. Because renaturation of S-S bonds is often difficult in the large scale production of proteins, this method should provide a useful tool with which to increase the production of recombinant proteins by eliminating S-S bonds with minimum concomitant stability loss.     

Conformational changes of the chaperone SecB upon binding to a model substrate--bovine pancreatic trypsin inhibitor (BPTI)

SecB is a homotetrameric cytosolic chaperone that forms part of the protein translocation machinery in E. coli. Due to SecB, nascent polypeptides are maintained in an unfolded translocation-competent state devoid of tertiary structure and thus are guided to the translocon. In vitro SecB rapidly binds to a variety of ligands in a non-native state. We have previously investigated the bound state conformation of the model substrate bovine pancreatic trypsin inhibitor (BPTI) as well as the conformation of SecB itself by using proximity relationships based on site-directed spin labeling and pyrene fluorescence methods. It was shown that SecB undergoes a conformational change during the process of substrate binding. Here, we generated SecB mutants containing but a single cysteine per subunit or an exposed highly reactive new cysteine after removal of the nearby intrinsic cysteines. Quantitative spin labeling was achieved with the methanethiosulfonate spin label (MTS) at positions C97 or E90C, respectively. Highfield (W-band) electron paramagnetic resonance (EPR) measurements revealed that with BPTI present the spin labels are exposed to a more polar/hydrophilic environment. Nanoscale distance measurements with double electron-electron resonance (DEER) were in excellent agreement with distances obtained by molecular modeling. Binding of BPTI also led to a slight change in distances between labels at C97 but not at E90C. While the shorter distance in the tetramer increased, the larger diagonal distance decreased. These findings can be explained by a widening of the tetrameric structure upon substrate binding much like the opening of two pairs of scissors.     

Binding of the bovine basic pancreatic trypsin inhibitor (Kunitz) to human Lys77-plasmin

The effect of pH and temperature on the association equilibrium constant (Ka) for the binding of the bovine basic pancreatic trypsin inhibitor (BPTI Kunitz inhibitor) to human Lys77-plasmin has been investigated. Ka values decrease with decreasing pH, reflecting the acid-pK and -midpoint shifts, upon BPTI binding, of a single ionizable group, between pH 5 and 9, and of a three-proton transition, between pH 3 and 5. At pH 8.0, values of thermodynamic parameters for BPTI binding to human Lys77-plasmin are: Ka = 1.2 X 10(9) M-1, delta G degree = -12.2 kcal/mol, and delta S degree = +49 entropy units (at 21 degrees C); and delta H degree = +2.3 kcal/mol (temperature independent between 5 degrees C and 45 degrees C; 1 kcal = 4184 J). BPTI binding properties of human Lys77-plasmin have been analysed in parallel with those of serine (pro)enzymes acting on cationic and non-cationic substrates. Considering the known molecular structures of homologous serine (pro)enzymes, or Kunitz and Kazal-type inhibitors and of their complexes, the observed binding behaviour of BPTI to human Lys77-plasmin was related to the inferred stereochemistry of the enzyme-inhibitor contact region.     

Binding of the bovine basic pancreatic trypsin inhibitor (Kunitz inhibitor) to human and bovine factor Xa. A thermodynamic study

The effect of pH and temperature on the apparent association equilibrium constant (Ka) for the binding of the bovine basic pancreatic trypsin inhibitor (BPTI, Kunitz inhibitor) to human and bovine factor Xa (Stuart-Prower factor; EC 3.4.21.6) has been investigated. Under all the experimental conditions, values of Ka for BPTI binding to human and bovine factor Xa are identical. On lowering the pH from 9.5 to 4.5, values of Ka (at 21.0 degrees C) for BPTI binding to human and bovine factor Xa decrease, thus reflecting the acidic pK shift of the His57 catalytic residue from 7.1, in the free enzyme, to 5.2, in the proteinase-inhibitor complex. At pH 8.0, values of the apparent thermodynamic parameters for BPTI binding to human and bovine factor Xa are: Ka = 2.1 x 10(5)M-1 (at 21.0 degrees C), delta G degree = -29.7 kJ/mol (at 21.0 degrees C), delta S degree = +161 entropy units (at 21.0 degrees C), and delta H degree = +17.6 kJ/mol (temperature-independent over the explored range, from 5.0 degrees C to 45.0 degrees C). Thermodynamics of BPTI binding to human and bovine factor Xa have been analysed in parallel with those of related serine (pro)enzyme/Kazal- and /Kunitz-type inhibitor systems. Considering the known molecular models, the observed binding behaviour of BPTI to human and bovine factor Xa was related to the inferred stereochemistry of the proteinase/inhibitor contact region.     

Binding of the bovine pancreatic secretory trypsin inhibitor (Kazal) to bovine serine (pro)enzymes

The effect of temperature and pH on the association equilibrium constant (K_a) for the binding of the bovine pancreatic secretory trypsin inhibitor (bovine PSTI, type I; Kazal inhibitor) to bovine β-trypsin, bovine α-chymotrypsin and bovine trypsinogen has been investigated. The results suggest that serine (pro)enzyme inhibitor interaction involves both rigorous spatial configuration and molecular flexibility.     

Crystal structures of bovine chymotrypsin and trypsin complexed to the inhibitor domain of Alzheimer's amyloid beta-protein precursor (APPI) and basic pancreatic trypsin inhibitor (BPTI): engineering of inhibitors with altered specificities.

The crystal structures of the inhibitor domain of Alzheimer's amyloid beta-protein precursor (APPI) complexed to bovine chymotrypsin (C-APPI) and trypsin (T-APPI) and basic pancreatic trypsin inhibitor (BPTI) bound to chymotrypsin (C-BPTI) have been solved and analyzed at 2.1 A, 1.8 A, and 2.6 A resolution, respectively. APPI and BPTI belong to the Kunitz family of inhibitors, which is characterized by a distinctive tertiary fold with three conserved disulfide bonds. At the specificity-determining site of these inhibitors (P1), residue 15(I)4 is an arginine in APPI and a lysine in BPTI, residue types that are counter to the chymotryptic hydrophobic specificity. In the chymotrypsin complexes, the Arg and Lys P1 side chains of the inhibitors adopt conformations that bend away from the bottom of the binding pocket to interact productively with elements of the binding pocket other than those observed for specificity-matched P1 side chains. The stereochemistry of the nucleophilic hydroxyl of Ser 195 in chymotrypsin relative to the scissile P1 bond of the inhibitors is identical to that observed for these groups in the trypsin-APPI complex, where Arg 15(I) is an optimal side chain for tryptic specificity. To further evaluate the diversity of sequences that can be accommodated by one of these inhibitors, APPI, we used phage display to randomly mutate residues 11, 13, 15, 17, and 19, which are major binding determinants. Inhibitors variants were selected that bound to either trypsin or chymotrypsin. As expected, trypsin specificity was principally directed by having a basic side chain at P1 (position 15); however, the P1 residues that were selected for chymotrypsin binding were His and Asn, rather than the expected large hydrophobic types. This can be rationalized by modeling these hydrophilic side chains to have similar H-bonding interactions to those observed in the structures of the described complexes. The specificity, or lack thereof, for the other individual subsites is discussed in the context of the "allowed" residues determined from a phage display mutagenesis selection experiment.     

Renaturation of the reduced bovine pancreatic trypsin inhibitor

Refolding of the reduced pancreatic trypsin inhibitor has been investigated using thiol-disulphide exchange with various disulphide reagents to regenerate the three disulphide bonds. Essentially quantitative renaturation was routinely achieved. The refolded inhibitor was indistinguishable from the original protein in interaction with trypsin and chymotrypsin, electrophoretic mobility, and nature of disulphide bonds.The kinetics of refolding using oxidized dithiothreitol to form the disulphide bonds have been studied in some detail. The renaturation reaction is usually of second-order, being first-order in both inhibitor and disulphide reagent concentrations. A short lag period in the appearance of inhibitor activity and the inhibition of the rate, but not the extent, of renaturation by low levels of reduced dithiothreitol suggest the accumulation of metastable intermediates. In addition, heterogeneity of the refolding reaction is apparent at high concentrations of disulphide reagent, with a fraction of the material being only slowly renatured.