Substrate specificity of penicillin acylase from Streptomyces lavendulae

The kinetic parameters of several substrates of penicillin acylase from Streptomyces lavendulae have been determined. The enzyme hydrolyses phenoxymethyl penicillin (penicillin V) and other penicillins with aliphatic acyl-chains such as penicillin F, dihydroF, and K. The best substrate was penicillin K (octanoyl penicillin) with a k(cat)/K(m) of 165.3 mM(-1) s(-1). The enzyme hydrolyses also chromogenic substrates as NIPOAB (2-nitro-5-phenoxyacetamido benzoic acid), NIHAB (2-nitro-5-hexanoylamido benzoic acid) or NIOAB (2-nitro-5-octanoylamido benzoic acid), however failed to hydrolyse phenylacetil penicillin (penicillin G) or NIPAB (2-nitro-5-phenylacetamido benzoic acid) and penicillins with polar substituents in the acyl moiety. These results suggest that the structure of the acyl moiety of the substrate is more determinant than the amino moiety for enzyme specificity. The enzyme was inhibited by several organic acids and the extent of inhibition changed with the hydrophobicity of the acid. The best inhibitor was octanoic acid with a K(i) of 0.8 mM. All the results, taking together, point to an active site highly hydrophobic for this penicillin acylase from Streptomyces lavendulae.     

A new method for spectrophotometric assay of activity of cross-linked penicillin acylase aggregates

A new method for monitoring reactions catalyzed by an immobilized enzyme, cross-linked penicillin acylase aggregates (PA CLEA), is suggested. Appropriate chromogenic substrates for spectrophotometric assay of catalytic activity of immobilized enzyme were chosen and their kinetic parameters determined. Active sites in PA CLEA preparations were titrated by the suggested method; it is shown that almost all active sites are retained during immobilization. This method is characterized as highly expressive, simple, and precise and may be used for control of PA immobilization efficiency as well as for study of operational, thermal, and pH stability of immobilized enzyme preparations.     

Covalent immobilization of penicillin acylase from Streptomyces lavendulae

Penicillin acylase from Streptomyces lavendulae has been covalently immobilized to epoxy-activated acrylic beads (Eupergit C). Consecutive modification of the matrix with bovine serum albumin leads to a new biocatalyst (ECPVA) with enhanced activity (1.5 fold) in the hydrolysis of penicillin V respect to its soluble counterpart. This biocatalyst had a K _m value of 7.6 mM, slightly higher than K _m for native acylase (3 mM). In addition, ECPVA can be recycled for at least 50 consecutive batch reactions without loss of catalytic activity.     

Biosynthesis of penicillin V acylase by Fusarium sp.: effect of culture conditions

Penicillin V acylase was produced, both intracellularly and extracellularly, by Fusarium sp. SKF 235 grown in submerged fermentation. When neopeptone was added to the medium, >95% of the penicillin V acylase was extracellular. In the absence of a complex organic nitrogen source, the fungus produced low levels of totally intracellular penicillin V acylase. MgSO₄ was essential for synthesis of the enzyme, which was induced by phenoxyacetic acid and penicillin V. The maximum yield of penicillin V acylase was 430 IU/g dry cell wt. The optimum pH value and temperature for the penicillin V acylase were 6.5 and 55°C, respectively.     

Rapid continuous colorimetric enzyme assay for penicillin G acylase

A rapid, continuous, colorimetric enzyme assay for penicillin G acylase has been developed. The assay measures the formation of the acidic products of penicillin G hydrolysis by following the decrease in pH using Phenol Red as an indicator. The activity measured is directly proportional to the amount of enzyme added to the assay, having a linear relationship with an R ² value of 0.9994.     

Enzymatic splitting of penicillin V for the production of 6-APA using immobilized penicillin V acylase

Penicillin V acylase from Fusarium sp. SKF 235 was immobilized on several cation-exchange resins, of which Amberlite CG-50 was preferred. Maximum activity of the immobilized penicillin V acylase was 250 to 280 IU/g dry beads. The pH and temperature optima of the enzyme shifted from 6.5 to 6.8 and 55°C to 60°C, respectively, as a result of immobilization. However, the K _m for penicillin V remained at 10mm. Parameters for producing 6-aminopenicillanic acid were investigated and the immobilized penicillin V acylase was used for 68 cycles in a stirred tank reactor.     

Enhanced production of penicillin G acylase from a recombinant Escherichia coli

Penicillin G acylase (pac) gene was cloned into a stable asd ⁺ vector (pYA292) and expressed in Escherichia coli. This recombinant strain produced 1000 units penicillin G acylase g^–1 cell dry wt, which is 23-fold more than that produced by parental Escherichia coli ATCC11105. This enzyme was purified to 16 units mg^–1 protein by a novel two-step process.     

Effect of complex nitrogen sources on the production of penicillin acylase byBacillus megaterium

The following complex nitrogen sources were evaluated for the production of penicillin acylase byBacillus megaterium: casein hydrolysate, corn steep liquor, stick water concentrate, blood meal and defatted sunflower meal. Experiments were run in shake flasks at 30‡C and pH 7.0. Best results were obtained with casein hydrolysate: 244 IU/I were produced with a productivity of 20.3 IU/l/h and yield of 717.6 IU/g of nitrogen. The lowest results correspond to sunflower meal with 39 IU/1.     

Hydrolysis of penicillin G by combination of immobilized penicillin acylase and electrodialysis

Phenylacetic acid, as inhibitory product, was formed from a hydrolysis of penicillin G by immobilized penicillin acylase. In this article, electrodialysis was applied to remove phenylacetic acid continuously from the reaction mixture and to enhance an efficiency of the reaction. When 268 and 537 mM of penicillin G solution were used as the substrate, the concentration of phenylacetic acid in the reaction mixture could be maintained at less than 81 and 126 mM, respectively, and eventually, 86% and 88% of phenylacetic acid produced were removed from the reaction mixture at the end of the hydrolysis, respectively. Times required to reach 96% and 94.8% conversion from 268 and 537 mM of initial penicillin G could be reduced to 65% and 64% respectively, by means of electrodialysis; while 3.0% and 4.3% of initial penicillin G of 268 and 537 mM were permeated out of the reaction chamber during the hydrolysis, respectively. However, a loss of penicillin G by permeation could be reduced from 4.3% to 3.4% by a repeated addition of penicillin G.     

Galactose induces the expression of penicillin acylase under control of the lac promoter in recombinant Escherichia coli

The expression of penicillin acylase (PA), cloned in the pPA102 plasmid under control of the wild-type lac promoter and using galactose as inducer in Escherichia coli JM101, JM103 and JM105 transformant cells, was analyzed. The E. coli JM101/pPA102 cultures attained the highest specific activity of PA. For large scale PA production based on E. coli JM101/pPA102 a culture media with galactose instead of isopropyl-thio-galactopyranoside as inducer would be as successful and less expensive.     

Kinetically controlled acylation of 6-APA catalyzed by penicillin acylase from Streptomyces lavendulae: effect of reaction conditions in the enzymatic synthesis of penicillin V

Abstract

Enzymatic synthesis of penicillin V (penV) by acylation of 6-aminopenicillanic acid (6-APA) was carried out using methyl phenoxyacetate (MPOA) as activated acyl donor and soluble penicillin acylase from Streptomyces lavendulae (SlPVA) as biocatalyst. The effect of different reaction conditions on penV synthesis was investigated, such as enzyme concentration, pH, molar ratio of 6-APA to MPOA, as well as presence of DMSO as water-miscible co-solvent at different concentrations. Time-course profiles of all reactions followed the typical pattern of kinetically controlled synthesis (KCS) of β-lactam antibiotics: penV concentration reached a maximum (highest yield or Y_max) and then decreased gradually. Such maximum was higher at pH 7.0, observing that final penV concentration was abruptly reduced when basic pH values were employed in the reaction. Under the selected conditions (100?mM Tris/HCl buffer pH 7.0, 30?°C, 2.7% (v/v) DMSO, 20?mM MPOA, 0.3 UI/ml of SlPVA), Y_max was enhanced by increasing the substrate molar ratio (6-APA to MPOA) up to 5, reaching a maximum of 94.5% and a S/H value of 16.4 (ratio of synthetic activity to hydrolytic activity). As a consequence, the use of an excess of 6-APA as nucleophile has allowed us to obtain some of the highest Y_max and S/H values among those reported in literature for KCS of β-lactam antibiotics. Although many penicillin G acylases (PGAs) have been described in kinetically controlled acylations, SlPVA should be considered as a different enzyme in the biocatalytic tool-box for novel potential synthetic processes, mainly due to its different substrate specificity compared to PGAs.     

Kinetic and microstructural characterization of immobilized penicillin acylase from Streptomyces lavendulae on Sepabeads EC-EP

Recombinant penicillin acylase from Streptomyces lavendulae was covalently bound to epoxy-activated Sepabeads EC-EP303®. Optimization of the immobilization process led to a homogeneous distribution of the enzyme on the support surface avoiding the attachment of enzyme aggregates, as shown by confocal electron microscopy. The optimal immobilized biocatalyst had a specific enzymatic activity of 26.2IUgwetcarrier^?1 in the hydrolysis of penicillin V at pH 8.0 and 40°C. This biocatalyst showed the highest activity at pH 8.5 and 65°C, 1.5 pH units lower and 5°C higher than its soluble counterpart. Substrate specificity of the derivative also showed its ability to efficiently hydrolyze other natural aliphatic penicillins such as penicillins K, F and dihydroF. The immobilized enzyme was highly stable at 40°C and pH 8.0 (t_1/2=625 h vs. t_1/2=397 h for the soluble enzyme), and it could be recycled for at least 30 consecutive batch reactions without loss of catalytic activity.     

Cephalosporin C acylase and penicillin V acylase formation by Aeromonas sp. ACY 95

Aeromonas sp. ACY 95 produces constitutively and intracellularly a penicillin V acylase at an early stage of fermentation (12 h) and a cephalosporin C acylase at a later stage (36 h). Some penicillins, cephalosporin C and their side chain moieties/analogues, phenoxyacetic acid, penicillin V and penicillin G, enhanced penicillin V acylase production while none of the test compounds affected cephalosporin C acylase production. Supplementation of the medium with some sugars and sugar derivatives repressed enzyme production to varying degrees. The studies on enzyme formation, induction and repression, and substrate profile suggest that the cephalosporin C acylase and penicillin V acylase are two distinct enzymes. Substrate specificity studies indicate that the Aeromonas sp. ACY 95 produces a true cephalosporin C acylase which unlike the enzymes reported hitherto hydrolyses cephalosporin C specifically.The authors are with Research and Development, Hindustan Antibiotics Limited, Pimpri. Pune 411 018, India     

Stabilization and functional properties of Escherichia coli penicillin G acylase by covalent conjugation of anionic polysaccharide carboxymethylcellulose

The stabilization of Escherichia coli penicillin G acylase (PGA) conjugated with carboxymethylcellulose (CMC) against temperature and pH was studied. The 2,3-dialdehyde derivative of CMC obtained by periodate oxidation was covalently conjugated to PGA via Schiff's base formation. The inactivation mechanism of both native and CMC-conjugated PGA appeared to obey first order inactivation kinetics during prolonged incubations at 40–60 °C and in the pH range 4–9. Inactivation rate constants of conjugated enzyme were always lower, and half-life times were always higher than that of native PGA. The activation free energy of inactivation (G _i values) of CMC-conjugated enzyme were found to be always higher than that of native PGA at all temperatures and pH values studied as another indicator of enzyme stabilization. Highest stability of CMC-conjugated enzyme was observed as nearly four-fold at 40 °C and pH 8.0. No changes were observed on the temperature and pH profiles of PGA after CMC conjugation. Lower K _m and higher k _cat values of PGA obtained after CMC conjugation indicates the improved effect of conjugation on the substrate affinity and catalytic performance of the enzyme.     

Molecular modeling studies of substrate binding by penicillin acylase

Molecular modeling has revealed intimate details of the mechanism of binding of natural substrate, penicillin G (PG), in the penicillin acylase active center and solved questions raised by analysis of available X-ray structures, mimicking Michaelis complex, which substantially differ in the binding pattern of the PG leaving group. Three MD trajectories were launched, starting from PDB complexes of the inactive mutant enzyme with PG (1FXV) and native penicillin acylase with sluggishly hydrolyzed substrate analog penicillin G sulfoxide (1GM9), or from the complex obtained by PG docking. All trajectories converged to a similar PG binding mode, which represented the near-to-attack conformation, consistent with chemical criteria of how reactive Michaelis complex should look. Simulated dynamic structure of the enzyme-substrate complex differed significantly from 1FXV, resembling rather 1GM9; however, additional contacts with residues bG385, bS386, and bN388 have been found, which were missing in X-ray structures. Combination of molecular docking and molecular dynamics also clarified the nature of extremely effective phenol binding in the hydrophobic pocket of penicillin acylase, which lacked proper explanation from crystallographic experiments. Alternative binding modes of phenol were probed, and corresponding trajectories converged to a single binding pattern characterized by a hydrogen bond between the phenol hydroxyl and the main chain oxygen of bS67, which was not evident from the crystal structure. Observation of the trajectory, in which phenol moved from its steady bound to pre-dissociation state, mapped the consequence of molecular events governing the conformational transitions in a coil region a143-a146 coupled to substrate binding and release of the reaction products. The current investigation provided information on dynamics of the conformational transitions accompanying substrate binding and significance of poorly structured and flexible regions in maintaining catalytic framework.     

青霉素G酰化酶工业进化的研究进展

青霉素G酰化酶是近几十年来β内酰胺类抗生素领域应用最广、开发最成功的酶之一。伴随着β-内酰胺类抗生素由化学合成法变更为酶法在中国的大规模产业化,得到了充分的开发与应用,取得了成功。青霉素G酰化酶不但用于水解制备6-APA、7-ADCA,更重要的是用于氨苄西林、头孢氨苄、阿莫西林、头孢拉定、头孢克洛等抗生素的制备。本文综述了近15年青霉素G酰化酶在我国研究与应用的历史沿革、基因与蛋白质结构、工业应用表达体系、工业评价标准与进化研究,还对各种突变株在具体医药工业领域的开发应用进行了综述,旨在梳理青霉素G酰化酶结构与性能的进化趋势以及在医药工业领域取得的巨大成就,同时也为相关人员在此领域进行深耕提供参考。     

微波对青霉素酰化酶催化反应性能的影响

运用动力学方法研究了微波对青霉素酰化酶(pK1和pK2分别为5.69-6.06和11.56)催化反应性能的影响。结果显示:使用微波解冻档对青霉素酰化酶进行一定时间的预处理后,能够加速酶的水解反应。酶液的最适处理时间为15 s,微波处理后,酶的最适温度为从原来的37℃上升到40℃,操作稳定性基本不变。对最适微波条件处理后的青霉素酰化酶pH值依赖性催化反应进行研究,从logVm和log(Vm/Km)与pH值关系曲线计算得到该酶的pK1和pK2分别为5.66-6.55和11.05。     

巨大芽孢杆菌青霉素G酰化酶的定点突变及其动力学性质研究

为了提高青霉素G酰化酶（PGA）在酸性及有机溶剂中的稳定性,以大肠杆菌的晶体结构为模板,用软件PMODELING同源模建巨大芽孢杆菌青霉素G酰化酶的三维结构结构并且选择PGA分子表面的合适碱性氨基酸突变为丙氨酸,通过三种不同的快速PCR介导定位突变的方法,将位于PGA的α亚基21位、128位和β亚基492位、512位的赖氨酸残基分别突变为丙氨酸,获得四个突变酶Kα021A、Kα128A、Kβ492A和Kβ512A。其中Kα128A和Kβ512A保持与野生型相近的酶活力,其动力学性质如最适温度、最适pH,Km及Kcat没有明显变化;突变酶Kα021A和Kβ492A则丧失 了酶活力。上述结果表明,PGA分子表面非活性中心的赖氨酸→丙氨酸点突变使突变子的性状发生了分化,突变效应呈现出丰富的多样性。该有理设计不但可以提高酶的稳定性,而且为揭示PGA结构和功能的关系提供了一个新的研究模型。     

Active site titration as a tool for the evaluation of immobilization procedures of penicillin acylase

Native and immobilized preparations of penicillin acylase from Escherichia coli and Alcaligenes faecalis were studied using an active site titration technique. Knowledge of the number of active sites allowed the calculation of the average turnover rate of the enzyme in the various preparations and allowed us to quantify the contribution of irreversible inactivation of the enzyme to the loss of catalytic activity during the immobilization procedure. In most cases a loss of active sites as well as a decrease of catalytic activity per active site (turnover rate) was observed upon immobilization. Immobilization techniques affected the enzymes differently. The effect of increased loading of penicillin acylase on the average turnover rate was determined by active site titration to assess diffusion limitations in the carrier.